| /* |
| * Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. |
| * Copyright (C) 2001 Ralf Baechle |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * Routines for generic manipulation of the interrupts found on the MIPS |
| * Malta board. |
| * The interrupt controller is located in the South Bridge a PIIX4 device |
| * with two internal 82C95 interrupt controllers. |
| */ |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/kernel.h> |
| #include <linux/random.h> |
| |
| #include <asm/traps.h> |
| #include <asm/i8259.h> |
| #include <asm/irq_cpu.h> |
| #include <asm/irq_regs.h> |
| #include <asm/mips-boards/malta.h> |
| #include <asm/mips-boards/maltaint.h> |
| #include <asm/mips-boards/piix4.h> |
| #include <asm/gt64120.h> |
| #include <asm/mips-boards/generic.h> |
| #include <asm/mips-boards/msc01_pci.h> |
| #include <asm/msc01_ic.h> |
| #include <asm/gic.h> |
| #include <asm/gcmpregs.h> |
| |
| int gcmp_present = -1; |
| int gic_present; |
| static unsigned long _msc01_biu_base; |
| static unsigned long _gcmp_base; |
| static unsigned int ipi_map[NR_CPUS]; |
| |
| static DEFINE_RAW_SPINLOCK(mips_irq_lock); |
| |
| static inline int mips_pcibios_iack(void) |
| { |
| int irq; |
| u32 dummy; |
| |
| /* |
| * Determine highest priority pending interrupt by performing |
| * a PCI Interrupt Acknowledge cycle. |
| */ |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| MSC_READ(MSC01_PCI_IACK, irq); |
| irq &= 0xff; |
| break; |
| case MIPS_REVISION_SCON_GT64120: |
| irq = GT_READ(GT_PCI0_IACK_OFS); |
| irq &= 0xff; |
| break; |
| case MIPS_REVISION_SCON_BONITO: |
| /* The following will generate a PCI IACK cycle on the |
| * Bonito controller. It's a little bit kludgy, but it |
| * was the easiest way to implement it in hardware at |
| * the given time. |
| */ |
| BONITO_PCIMAP_CFG = 0x20000; |
| |
| /* Flush Bonito register block */ |
| dummy = BONITO_PCIMAP_CFG; |
| iob(); /* sync */ |
| |
| irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); |
| iob(); /* sync */ |
| irq &= 0xff; |
| BONITO_PCIMAP_CFG = 0; |
| break; |
| default: |
| printk(KERN_WARNING "Unknown system controller.\n"); |
| return -1; |
| } |
| return irq; |
| } |
| |
| static inline int get_int(void) |
| { |
| unsigned long flags; |
| int irq; |
| raw_spin_lock_irqsave(&mips_irq_lock, flags); |
| |
| irq = mips_pcibios_iack(); |
| |
| /* |
| * The only way we can decide if an interrupt is spurious |
| * is by checking the 8259 registers. This needs a spinlock |
| * on an SMP system, so leave it up to the generic code... |
| */ |
| |
| raw_spin_unlock_irqrestore(&mips_irq_lock, flags); |
| |
| return irq; |
| } |
| |
| static void malta_hw0_irqdispatch(void) |
| { |
| int irq; |
| |
| irq = get_int(); |
| if (irq < 0) { |
| /* interrupt has already been cleared */ |
| return; |
| } |
| |
| do_IRQ(MALTA_INT_BASE + irq); |
| } |
| |
| static void malta_ipi_irqdispatch(void) |
| { |
| int irq; |
| |
| irq = gic_get_int(); |
| if (irq < 0) |
| return; /* interrupt has already been cleared */ |
| |
| do_IRQ(MIPS_GIC_IRQ_BASE + irq); |
| } |
| |
| static void corehi_irqdispatch(void) |
| { |
| unsigned int intedge, intsteer, pcicmd, pcibadaddr; |
| unsigned int pcimstat, intisr, inten, intpol; |
| unsigned int intrcause, datalo, datahi; |
| struct pt_regs *regs = get_irq_regs(); |
| |
| printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n"); |
| printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" |
| "Cause : %08lx\nbadVaddr : %08lx\n", |
| regs->cp0_epc, regs->cp0_status, |
| regs->cp0_cause, regs->cp0_badvaddr); |
| |
| /* Read all the registers and then print them as there is a |
| problem with interspersed printk's upsetting the Bonito controller. |
| Do it for the others too. |
| */ |
| |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| ll_msc_irq(); |
| break; |
| case MIPS_REVISION_SCON_GT64120: |
| intrcause = GT_READ(GT_INTRCAUSE_OFS); |
| datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); |
| datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); |
| printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause); |
| printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n", |
| datahi, datalo); |
| break; |
| case MIPS_REVISION_SCON_BONITO: |
| pcibadaddr = BONITO_PCIBADADDR; |
| pcimstat = BONITO_PCIMSTAT; |
| intisr = BONITO_INTISR; |
| inten = BONITO_INTEN; |
| intpol = BONITO_INTPOL; |
| intedge = BONITO_INTEDGE; |
| intsteer = BONITO_INTSTEER; |
| pcicmd = BONITO_PCICMD; |
| printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr); |
| printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten); |
| printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol); |
| printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge); |
| printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer); |
| printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd); |
| printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr); |
| printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat); |
| break; |
| } |
| |
| die("CoreHi interrupt", regs); |
| } |
| |
| static inline int clz(unsigned long x) |
| { |
| __asm__( |
| " .set push \n" |
| " .set mips32 \n" |
| " clz %0, %1 \n" |
| " .set pop \n" |
| : "=r" (x) |
| : "r" (x)); |
| |
| return x; |
| } |
| |
| /* |
| * Version of ffs that only looks at bits 12..15. |
| */ |
| static inline unsigned int irq_ffs(unsigned int pending) |
| { |
| #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) |
| return -clz(pending) + 31 - CAUSEB_IP; |
| #else |
| unsigned int a0 = 7; |
| unsigned int t0; |
| |
| t0 = pending & 0xf000; |
| t0 = t0 < 1; |
| t0 = t0 << 2; |
| a0 = a0 - t0; |
| pending = pending << t0; |
| |
| t0 = pending & 0xc000; |
| t0 = t0 < 1; |
| t0 = t0 << 1; |
| a0 = a0 - t0; |
| pending = pending << t0; |
| |
| t0 = pending & 0x8000; |
| t0 = t0 < 1; |
| /* t0 = t0 << 2; */ |
| a0 = a0 - t0; |
| /* pending = pending << t0; */ |
| |
| return a0; |
| #endif |
| } |
| |
| /* |
| * IRQs on the Malta board look basically (barring software IRQs which we |
| * don't use at all and all external interrupt sources are combined together |
| * on hardware interrupt 0 (MIPS IRQ 2)) like: |
| * |
| * MIPS IRQ Source |
| * -------- ------ |
| * 0 Software (ignored) |
| * 1 Software (ignored) |
| * 2 Combined hardware interrupt (hw0) |
| * 3 Hardware (ignored) |
| * 4 Hardware (ignored) |
| * 5 Hardware (ignored) |
| * 6 Hardware (ignored) |
| * 7 R4k timer (what we use) |
| * |
| * We handle the IRQ according to _our_ priority which is: |
| * |
| * Highest ---- R4k Timer |
| * Lowest ---- Combined hardware interrupt |
| * |
| * then we just return, if multiple IRQs are pending then we will just take |
| * another exception, big deal. |
| */ |
| |
| asmlinkage void plat_irq_dispatch(void) |
| { |
| unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; |
| int irq; |
| |
| irq = irq_ffs(pending); |
| |
| if (irq == MIPSCPU_INT_I8259A) |
| malta_hw0_irqdispatch(); |
| else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) |
| malta_ipi_irqdispatch(); |
| else if (irq >= 0) |
| do_IRQ(MIPS_CPU_IRQ_BASE + irq); |
| else |
| spurious_interrupt(); |
| } |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| |
| |
| #define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3 |
| #define GIC_MIPS_CPU_IPI_CALL_IRQ 4 |
| |
| #define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ |
| #define C_RESCHED C_SW0 |
| #define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */ |
| #define C_CALL C_SW1 |
| static int cpu_ipi_resched_irq, cpu_ipi_call_irq; |
| |
| static void ipi_resched_dispatch(void) |
| { |
| do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); |
| } |
| |
| static void ipi_call_dispatch(void) |
| { |
| do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); |
| } |
| |
| static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) |
| { |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) |
| { |
| smp_call_function_interrupt(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction irq_resched = { |
| .handler = ipi_resched_interrupt, |
| .flags = IRQF_DISABLED|IRQF_PERCPU, |
| .name = "IPI_resched" |
| }; |
| |
| static struct irqaction irq_call = { |
| .handler = ipi_call_interrupt, |
| .flags = IRQF_DISABLED|IRQF_PERCPU, |
| .name = "IPI_call" |
| }; |
| #endif /* CONFIG_MIPS_MT_SMP */ |
| |
| static int gic_resched_int_base; |
| static int gic_call_int_base; |
| #define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) |
| #define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) |
| |
| unsigned int plat_ipi_call_int_xlate(unsigned int cpu) |
| { |
| return GIC_CALL_INT(cpu); |
| } |
| |
| unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) |
| { |
| return GIC_RESCHED_INT(cpu); |
| } |
| |
| static struct irqaction i8259irq = { |
| .handler = no_action, |
| .name = "XT-PIC cascade" |
| }; |
| |
| static struct irqaction corehi_irqaction = { |
| .handler = no_action, |
| .name = "CoreHi" |
| }; |
| |
| static msc_irqmap_t __initdata msc_irqmap[] = { |
| {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, |
| {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, |
| }; |
| static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); |
| |
| static msc_irqmap_t __initdata msc_eicirqmap[] = { |
| {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, |
| {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, |
| {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} |
| }; |
| |
| static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); |
| |
| /* |
| * This GIC specific tabular array defines the association between External |
| * Interrupts and CPUs/Core Interrupts. The nature of the External |
| * Interrupts is also defined here - polarity/trigger. |
| */ |
| |
| #define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK |
| #define X GIC_UNUSED |
| |
| static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { |
| { X, X, X, X, 0 }, |
| { X, X, X, X, 0 }, |
| { X, X, X, X, 0 }, |
| { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { X, X, X, X, 0 }, |
| { X, X, X, X, 0 }, |
| { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, |
| { X, X, X, X, 0 }, |
| /* The remainder of this table is initialised by fill_ipi_map */ |
| }; |
| #undef X |
| |
| /* |
| * GCMP needs to be detected before any SMP initialisation |
| */ |
| int __init gcmp_probe(unsigned long addr, unsigned long size) |
| { |
| if (mips_revision_sconid != MIPS_REVISION_SCON_ROCIT) { |
| gcmp_present = 0; |
| return gcmp_present; |
| } |
| |
| if (gcmp_present >= 0) |
| return gcmp_present; |
| |
| _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); |
| _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); |
| gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; |
| |
| if (gcmp_present) |
| pr_debug("GCMP present\n"); |
| return gcmp_present; |
| } |
| |
| /* Return the number of IOCU's present */ |
| int __init gcmp_niocu(void) |
| { |
| return gcmp_present ? |
| (GCMPGCB(GC) & GCMP_GCB_GC_NUMIOCU_MSK) >> GCMP_GCB_GC_NUMIOCU_SHF : |
| 0; |
| } |
| |
| /* Set GCMP region attributes */ |
| void __init gcmp_setregion(int region, unsigned long base, |
| unsigned long mask, int type) |
| { |
| GCMPGCBn(CMxBASE, region) = base; |
| GCMPGCBn(CMxMASK, region) = mask | type; |
| } |
| |
| #if defined(CONFIG_MIPS_MT_SMP) |
| static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin) |
| { |
| int intr = baseintr + cpu; |
| gic_intr_map[intr].cpunum = cpu; |
| gic_intr_map[intr].pin = cpupin; |
| gic_intr_map[intr].polarity = GIC_POL_POS; |
| gic_intr_map[intr].trigtype = GIC_TRIG_EDGE; |
| gic_intr_map[intr].flags = GIC_FLAG_IPI; |
| ipi_map[cpu] |= (1 << (cpupin + 2)); |
| } |
| |
| static void __init fill_ipi_map(void) |
| { |
| int cpu; |
| |
| for (cpu = 0; cpu < NR_CPUS; cpu++) { |
| fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1); |
| fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2); |
| } |
| } |
| #endif |
| |
| void __init arch_init_ipiirq(int irq, struct irqaction *action) |
| { |
| setup_irq(irq, action); |
| set_irq_handler(irq, handle_percpu_irq); |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| init_i8259_irqs(); |
| |
| if (!cpu_has_veic) |
| mips_cpu_irq_init(); |
| |
| if (gcmp_present) { |
| GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; |
| gic_present = 1; |
| } else { |
| if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) { |
| _msc01_biu_base = (unsigned long) |
| ioremap_nocache(MSC01_BIU_REG_BASE, |
| MSC01_BIU_ADDRSPACE_SZ); |
| gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & |
| MSC01_SC_CFG_GICPRES_MSK) >> |
| MSC01_SC_CFG_GICPRES_SHF; |
| } |
| } |
| if (gic_present) |
| pr_debug("GIC present\n"); |
| |
| switch (mips_revision_sconid) { |
| case MIPS_REVISION_SCON_SOCIT: |
| case MIPS_REVISION_SCON_ROCIT: |
| if (cpu_has_veic) |
| init_msc_irqs(MIPS_MSC01_IC_REG_BASE, |
| MSC01E_INT_BASE, msc_eicirqmap, |
| msc_nr_eicirqs); |
| else |
| init_msc_irqs(MIPS_MSC01_IC_REG_BASE, |
| MSC01C_INT_BASE, msc_irqmap, |
| msc_nr_irqs); |
| break; |
| |
| case MIPS_REVISION_SCON_SOCITSC: |
| case MIPS_REVISION_SCON_SOCITSCP: |
| if (cpu_has_veic) |
| init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, |
| MSC01E_INT_BASE, msc_eicirqmap, |
| msc_nr_eicirqs); |
| else |
| init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, |
| MSC01C_INT_BASE, msc_irqmap, |
| msc_nr_irqs); |
| } |
| |
| if (cpu_has_veic) { |
| set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch); |
| set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); |
| setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); |
| setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); |
| } else if (cpu_has_vint) { |
| set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); |
| set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); |
| #ifdef CONFIG_MIPS_MT_SMTC |
| setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq, |
| (0x100 << MIPSCPU_INT_I8259A)); |
| setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, |
| &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); |
| /* |
| * Temporary hack to ensure that the subsidiary device |
| * interrupts coing in via the i8259A, but associated |
| * with low IRQ numbers, will restore the Status.IM |
| * value associated with the i8259A. |
| */ |
| { |
| int i; |
| |
| for (i = 0; i < 16; i++) |
| irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A); |
| } |
| #else /* Not SMTC */ |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, |
| &corehi_irqaction); |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| } else { |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); |
| setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, |
| &corehi_irqaction); |
| } |
| |
| if (gic_present) { |
| /* FIXME */ |
| int i; |
| #if defined(CONFIG_MIPS_MT_SMP) |
| gic_call_int_base = GIC_NUM_INTRS - NR_CPUS; |
| gic_resched_int_base = gic_call_int_base - NR_CPUS; |
| fill_ipi_map(); |
| #endif |
| gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, |
| ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); |
| if (!gcmp_present) { |
| /* Enable the GIC */ |
| i = REG(_msc01_biu_base, MSC01_SC_CFG); |
| REG(_msc01_biu_base, MSC01_SC_CFG) = |
| (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); |
| pr_debug("GIC Enabled\n"); |
| } |
| #if defined(CONFIG_MIPS_MT_SMP) |
| /* set up ipi interrupts */ |
| if (cpu_has_vint) { |
| set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); |
| set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch); |
| } |
| /* Argh.. this really needs sorting out.. */ |
| printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status()); |
| write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4); |
| printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); |
| write_c0_status(0x1100dc00); |
| printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); |
| for (i = 0; i < NR_CPUS; i++) { |
| arch_init_ipiirq(MIPS_GIC_IRQ_BASE + |
| GIC_RESCHED_INT(i), &irq_resched); |
| arch_init_ipiirq(MIPS_GIC_IRQ_BASE + |
| GIC_CALL_INT(i), &irq_call); |
| } |
| #endif |
| } else { |
| #if defined(CONFIG_MIPS_MT_SMP) |
| /* set up ipi interrupts */ |
| if (cpu_has_veic) { |
| set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); |
| set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch); |
| cpu_ipi_resched_irq = MSC01E_INT_SW0; |
| cpu_ipi_call_irq = MSC01E_INT_SW1; |
| } else { |
| if (cpu_has_vint) { |
| set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); |
| set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); |
| } |
| cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; |
| cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; |
| } |
| arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched); |
| arch_init_ipiirq(cpu_ipi_call_irq, &irq_call); |
| #endif |
| } |
| } |
| |
| void malta_be_init(void) |
| { |
| if (gcmp_present) { |
| /* Could change CM error mask register */ |
| } |
| } |
| |
| |
| static char *tr[8] = { |
| "mem", "gcr", "gic", "mmio", |
| "0x04", "0x05", "0x06", "0x07" |
| }; |
| |
| static char *mcmd[32] = { |
| [0x00] = "0x00", |
| [0x01] = "Legacy Write", |
| [0x02] = "Legacy Read", |
| [0x03] = "0x03", |
| [0x04] = "0x04", |
| [0x05] = "0x05", |
| [0x06] = "0x06", |
| [0x07] = "0x07", |
| [0x08] = "Coherent Read Own", |
| [0x09] = "Coherent Read Share", |
| [0x0a] = "Coherent Read Discard", |
| [0x0b] = "Coherent Ready Share Always", |
| [0x0c] = "Coherent Upgrade", |
| [0x0d] = "Coherent Writeback", |
| [0x0e] = "0x0e", |
| [0x0f] = "0x0f", |
| [0x10] = "Coherent Copyback", |
| [0x11] = "Coherent Copyback Invalidate", |
| [0x12] = "Coherent Invalidate", |
| [0x13] = "Coherent Write Invalidate", |
| [0x14] = "Coherent Completion Sync", |
| [0x15] = "0x15", |
| [0x16] = "0x16", |
| [0x17] = "0x17", |
| [0x18] = "0x18", |
| [0x19] = "0x19", |
| [0x1a] = "0x1a", |
| [0x1b] = "0x1b", |
| [0x1c] = "0x1c", |
| [0x1d] = "0x1d", |
| [0x1e] = "0x1e", |
| [0x1f] = "0x1f" |
| }; |
| |
| static char *core[8] = { |
| "Invalid/OK", "Invalid/Data", |
| "Shared/OK", "Shared/Data", |
| "Modified/OK", "Modified/Data", |
| "Exclusive/OK", "Exclusive/Data" |
| }; |
| |
| static char *causes[32] = { |
| "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", |
| "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", |
| "0x08", "0x09", "0x0a", "0x0b", |
| "0x0c", "0x0d", "0x0e", "0x0f", |
| "0x10", "0x11", "0x12", "0x13", |
| "0x14", "0x15", "0x16", "INTVN_WR_ERR", |
| "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", |
| "0x1c", "0x1d", "0x1e", "0x1f" |
| }; |
| |
| int malta_be_handler(struct pt_regs *regs, int is_fixup) |
| { |
| /* This duplicates the handling in do_be which seems wrong */ |
| int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; |
| |
| if (gcmp_present) { |
| unsigned long cm_error = GCMPGCB(GCMEC); |
| unsigned long cm_addr = GCMPGCB(GCMEA); |
| unsigned long cm_other = GCMPGCB(GCMEO); |
| unsigned long cause, ocause; |
| char buf[256]; |
| |
| cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK); |
| if (cause != 0) { |
| cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF; |
| if (cause < 16) { |
| unsigned long cca_bits = (cm_error >> 15) & 7; |
| unsigned long tr_bits = (cm_error >> 12) & 7; |
| unsigned long mcmd_bits = (cm_error >> 7) & 0x1f; |
| unsigned long stag_bits = (cm_error >> 3) & 15; |
| unsigned long sport_bits = (cm_error >> 0) & 7; |
| |
| snprintf(buf, sizeof(buf), |
| "CCA=%lu TR=%s MCmd=%s STag=%lu " |
| "SPort=%lu\n", |
| cca_bits, tr[tr_bits], mcmd[mcmd_bits], |
| stag_bits, sport_bits); |
| } else { |
| /* glob state & sresp together */ |
| unsigned long c3_bits = (cm_error >> 18) & 7; |
| unsigned long c2_bits = (cm_error >> 15) & 7; |
| unsigned long c1_bits = (cm_error >> 12) & 7; |
| unsigned long c0_bits = (cm_error >> 9) & 7; |
| unsigned long sc_bit = (cm_error >> 8) & 1; |
| unsigned long mcmd_bits = (cm_error >> 3) & 0x1f; |
| unsigned long sport_bits = (cm_error >> 0) & 7; |
| snprintf(buf, sizeof(buf), |
| "C3=%s C2=%s C1=%s C0=%s SC=%s " |
| "MCmd=%s SPort=%lu\n", |
| core[c3_bits], core[c2_bits], |
| core[c1_bits], core[c0_bits], |
| sc_bit ? "True" : "False", |
| mcmd[mcmd_bits], sport_bits); |
| } |
| |
| ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >> |
| GCMP_GCB_GMEO_ERROR_2ND_SHF; |
| |
| printk("CM_ERROR=%08lx %s <%s>\n", cm_error, |
| causes[cause], buf); |
| printk("CM_ADDR =%08lx\n", cm_addr); |
| printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]); |
| |
| /* reprime cause register */ |
| GCMPGCB(GCMEC) = 0; |
| } |
| } |
| |
| return retval; |
| } |