blob: 3f15fcfe4a2ea96e1c4ea4bd8d08beaeb26266a7 [file] [log] [blame]
==============================
MPI Header File Change History
==============================
Copyright (c) 2000-2007 LSI Corporation.
---------------------------------------
Header Set Release Version: 01.05.16
Header Set Release Date: 05-24-07
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
mpi.h 01.05.13 01.05.12
mpi_ioc.h 01.05.14 01.05.13
mpi_cnfg.h 01.05.15 01.05.14
mpi_init.h 01.05.09 01.05.09
mpi_targ.h 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.03 01.05.03
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
mpi_sas.h 01.05.04 01.05.04
mpi_type.h 01.05.02 01.05.02
mpi_history.txt 01.05.14 01.05.14
* Date Version Description
* -------- -------- ------------------------------------------------------
mpi.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition.
* 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR.
* 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions.
* Removed LAN_SUSPEND function definition.
* Added MPI_MSGFLAGS_CONTINUATION_REPLY definition.
* 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition.
* Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros.
* 07-27-00 01.00.04 Added MPI_FAULT_ definitions.
* Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions.
* Added MPI_IOCSTATUS_INTERNAL_ERROR definition.
* Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added new function codes.
* 01-09-01 01.01.03 Added more definitions to the system interface section
* Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT.
* 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01.
* 02-20-01 01.01.05 Started using MPI_POINTER.
* Added defines for MPI_DIAG_PREVENT_IOC_BOOT and
* MPI_DIAG_CLEAR_FLASH_BAD_SIG.
* Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines.
* 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define.
* Added function codes for RAID.
* 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE,
* MPI_DOORBELL_USED, to better match the spec.
* 08-08-01 01.02.01 Original release for v1.2 work.
* Changed MPI_VERSION_MINOR from 0x01 to 0x02.
* Added define MPI_FUNCTION_TOOLBOX.
* 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR.
* 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR.
* 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines.
* 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT.
* 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX.
* 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT.
* 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and
* obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX.
* 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED
* 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value.
* 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT.
* 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST
* and MPI_FUNCTION_DIAG_RELEASE.
* Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define.
* Bumped MPI_HEADER_VERSION_UNIT value.
* 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3.
* Added codes for Inband.
* 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell.
* Added define for offset of High Priority Request Queue.
* Added new function codes and new IOCStatus codes.
* Added a IOCLogInfo type of SAS.
* 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT.
* 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT.
* 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT.
* 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT.
* 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT.
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
* 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
mpi_ioc.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure.
* 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY.
* 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure.
* Added _MSG_EVENT_ACK_REPLY structure.
* Added _MSG_FW_DOWNLOAD_REPLY structure.
* Added _MSG_TOOLBOX_REPLY structure.
* 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure.
* 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI,
* _LINK_STATUS, _LOOP_STATE and _LOGOUT.
* 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in
* _MSG_EVENT_ACK_REPLY structure to match specification.
* 11-02-00 01.01.01 Original release for post 1.0 work
* Added a value for Manufacturer to WhoInit
* 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and
* removed toolbox message.
* 01-09-01 01.01.03 Added event enabled and disabled defines.
* Added structures for FwHeader and DataHeader.
* Added ImageType to FwUpload reply.
* 02-20-01 01.01.04 Started using MPI_POINTER.
* 02-27-01 01.01.05 Added event for RAID status change and its event data.
* Added IocNumber field to MSG_IOC_FACTS_REPLY.
* 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER.
* Added structure offset comments.
* 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE.
* 08-08-01 01.02.01 Original release for v1.2 work.
* New format for FWVersion and ProductId in
* MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
* 08-31-01 01.02.02 Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
* related structure and defines.
* Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
* Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
* Replaced a reserved field in MSG_IOC_FACTS_REPLY with
* IOCExceptions and changed DataImageSize to reserved.
* Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and
* MPI_FW_UPLOAD_ITYPE_NVDATA.
* 09-28-01 01.02.03 Modified Event Data for Integrated RAID.
* 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field.
* 03-14-02 01.02.05 Added HeaderVersion field to MSG_IOC_FACTS_REPLY.
* 05-31-02 01.02.06 Added define for
* MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID.
* Added AliasIndex to EVENT_DATA_LOGOUT structure.
* 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_.
* 06-26-03 01.02.08 Added new values to the product family defines.
* 04-29-04 01.02.09 Added IOCCapabilities field to MSG_IOC_FACTS_REPLY and
* added related defines.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added four new fields to MSG_IOC_INIT.
* Added three new fields to MSG_IOC_FACTS_REPLY.
* Defined four new bits for the IOCCapabilities field of
* the IOCFacts reply.
* Added two new PortTypes for the PortFacts reply.
* Added six new events along with their EventData
* structures.
* Added a new MsgFlag to the FwDownload request to
* indicate last segment.
* Defined a new image type of boot loader.
* Added FW family codes for SAS product families.
* 10-05-04 01.05.02 Added ReplyFifoHostSignalingAddr field to
* MSG_IOC_FACTS_REPLY.
* 12-07-04 01.05.03 Added more defines for SAS Discovery Error event.
* 12-09-04 01.05.04 Added Unsupported device to SAS Device event.
* 01-15-05 01.05.05 Added event data for SAS SES Event.
* 02-09-05 01.05.06 Added MPI_FW_UPLOAD_ITYPE_FW_BACKUP define.
* 02-22-05 01.05.07 Added Host Page Buffer Persistent flag to IOC Facts
* Reply and IOC Init Request.
* 03-11-05 01.05.08 Added family code for 1068E family.
* Removed IOCFacts Reply EEDP Capability bit.
* 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
* Added Max SATA Targets to SAS Discovery Error event.
* 08-30-05 01.05.10 Added 4 new events and their event data structures.
* Added new ReasonCode value for SAS Device Status Change
* event.
* Added new family code for FC949E.
* 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR.
* Added additional Reason Codes and more event data fields
* to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE.
* Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and
* new event.
* Added MPI_EVENT_SAS_SMP_ERROR and event data structure.
* Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event
* data structure.
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
* data structure.
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
* 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
* Added MaxInitiators field to PortFacts reply.
* Added SAS Device Status Change ReasonCode for
* asynchronous notification.
* Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
* data structure.
* Added new ImageType values for FWDownload and FWUpload
* requests.
* 02-28-07 01.05.13 Added MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT for SAS
* Broadcast Event Data (replacing _RESERVED2).
* For Discovery Error Event Data DiscoveryStatus field,
* replaced _MULTPL_PATHS with _UNSUPPORTED_DEVICE and
* added _MULTI_PORT_DOMAIN.
* 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
* Added Common Boot Block type to FWUpload Request.
* --------------------------------------------------------------------------
mpi_cnfg.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages.
* Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
* fields to FC_DEVICE_0 page, updated the page version.
* Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
* SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
* and updated the page versions.
* Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
* page and updated the page version.
* Added Information field and _INFO_PARAMS_NEGOTIATED
* definition to SCSI_DEVICE_0 page.
* 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the
* page version.
* Added BucketsRemaining to LAN_1 page, redefined the
* state values, and updated the page version.
* Revised bus width definitions in SCSI_PORT_0,
* SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
* 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page
* version.
* Moved FC_DEVICE_0 PageAddress description to spec.
* 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field
* widths in IOC_0 page and updated the page version.
* 11-02-00 01.01.01 Original release for post 1.0 work
* Added Manufacturing pages, IO Unit Page 2, SCSI SPI
* Port Page 2, FC Port Page 4, FC Port Page 5
* 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01.
* 12-05-00 01.01.04 Modified config page actions.
* 01-09-01 01.01.05 Added defines for page address formats.
* Data size for Manufacturing pages 2 and 3 no longer
* defined here.
* Io Unit Page 2 size is fixed at 4 adapters and some
* flags were changed.
* SCSI Port Page 2 Device Settings modified.
* New fields added to FC Port Page 0 and some flags
* cleaned up.
* Removed impedance flash from FC Port Page 1.
* Added FC Port pages 6 and 7.
* 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0.
* 01-29-01 01.01.07 Changed some defines to make them 32 character unique.
* Added some LinkType defines for FcPortPage0.
* 02-20-01 01.01.08 Started using MPI_POINTER.
* 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
* MPI_CONFIG_PAGETYPE_RAID_VOLUME.
* Added definitions and structures for IOC Page 2 and
* RAID Volume Page 2.
* 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
* CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
* Added VendorId and ProductRevLevel fields to
* RAIDVOL2_IM_PHYS_ID struct.
* Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
* defines to make them compatible to MPI version 1.0.
* Added structure offset comments.
* 04-09-01 01.01.11 Added some new defines for the PageAddress field and
* removed some obsolete ones.
* Added IO Unit Page 3.
* Modified defines for Scsi Port Page 2.
* Modified RAID Volume Pages.
* 08-08-01 01.02.01 Original release for v1.2 work.
* Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
* Added defines for the SEP bits in RVP2 VolumeSettings.
* Modified the DeviceSettings field in RVP2 to use the
* proper structure.
* Added defines for SES, SAF-TE, and cross channel for
* IOCPage2 CapabilitiesFlags.
* Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE.
* Removed define for
* MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE.
* Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
* 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035.
* Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
* and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY.
* Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS,
* MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and
* MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and
* MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED.
* Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
* and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED.
* Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
* Added rejected bits to SCSI Device Page 0 Information.
* Increased size of ALPA array in FC Port Page 2 by one
* and removed a one byte reserved field.
* 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in
* CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering.
* Added structures for Manufacturing Page 4, IO Unit
* Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and
* RAID PhysDisk Page 0.
* 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
* Modified some of the new defines to make them 32
* character unique.
* Modified how variable length pages (arrays) are defined.
* Added generic defines for hot spare pools and RAID
* volume types.
* 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR.
* 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
* related define, and bumped the page version define.
* 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
* reserved byte and added a define.
* Added define for
* MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE.
* Added new config page: CONFIG_PAGE_IOC_5.
* Added MaxAliases, MaxHardAliases, and NumCurrentAliases
* fields to CONFIG_PAGE_FC_PORT_0.
* Added AltConnector and NumRequestedAliases fields to
* CONFIG_PAGE_FC_PORT_1.
* Added new config page: CONFIG_PAGE_FC_PORT_10.
* 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines.
* Added additional MPI_SCSIDEVPAGE0_NP_ defines.
* Added more MPI_SCSIDEVPAGE1_RP_ defines.
* Added define for
* MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
* Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
* Modified MPI_FCPORTPAGE5_FLAGS_ defines.
* 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
* 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
* Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
* Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
* 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for
* CONFIG_PAGE_FC_PORT_1.
* Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
* an alias.
* Added more device id defines.
* 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
* Added TargetConfig and IDConfig fields to
* CONFIG_PAGE_SCSI_PORT_1.
* Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
* to control DV.
* Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
* In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
* with ADISCHardALPA.
* Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
* 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
* fields and related defines to CONFIG_PAGE_FC_PORT_1.
* Added define for
* MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK.
* Added new fields to the substructures of
* CONFIG_PAGE_FC_PORT_10.
* 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0,
* CONFIG_PAGE_SCSI_DEVICE_0, and
* CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for
* these pages.
* 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0.
* 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config
* pages.
* Added a new structure for extended config page header.
* Added new extended config pages types and structures for
* SAS IO Unit, SAS Expander, SAS Device, and SAS PHY.
* Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4
* to add a Flags field.
* Two new Manufacturing config pages (5 and 6).
* Two new bits defined for IO Unit Page 1 Flags field.
* Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields
* to specify the BIOS boot device.
* Four new Flags bits defined for IO Unit Page 2.
* Added IO Unit Page 4.
* Added EEDP Flags settings to IOC Page 1.
* Added new BIOS Page 1 config page.
* 10-05-04 01.05.02 Added define for
* MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE.
* Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and
* associated defines.
* Added more defines for SAS IO Unit Page 0
* DiscoveryStatus field.
* Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK
* and MPI_SAS_IOUNIT0_DS_TABLE_LINK.
* Added defines for Physical Mapping Modes to SAS IO Unit
* Page 2.
* Added define for
* MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH.
* 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode.
* Added defines for MaxTargetSpinUp to BIOS Page 1.
* Added 5 new ControlFlags defines for SAS IO Unit
* Page 1.
* Added MaxNumPhysicalMappedIDs field to SAS IO Unit
* Page 2.
* Added AccessStatus field to SAS Device Page 0 and added
* new Flags bits for supported SATA features.
* 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID
* Volume Page 1, and RAID Physical Disk Page 1.
* Replaced IO Unit Page 1 BootTargetID,BootBus, and
* BootAdapterNum with reserved field.
* Added DataScrubRate and ResyncRate to RAID Volume
* Page 0.
* Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT
* define.
* 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1
* Flags field.
* Added Auto Port Config flag define for SAS IOUNIT
* Page 1 ControlFlags.
* Added Disabled bad Phy define to Expander Page 1
* Discovery Info field.
* Added SAS/SATA device support to SAS IOUnit Page 1
* ControlFlags.
* Added Unsupported device to SAS Dev Page 0 Flags field
* Added disable use SATA Hash Address for SAS IOUNIT
* page 1 in ControlFields.
* 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to
* Manufacturing Page 4.
* Added new defines for BIOS Page 1 IOCSettings field.
* Added ExtDiskIdentifier field to RAID Physical Disk
* Page 0.
* Added new defines for SAS IO Unit Page 1 ControlFlags
* and to SAS Device Page 0 Flags to control SATA devices.
* Added defines and structures for the new Log Page 0, a
* new type of configuration page.
* 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0.
* Added WWID field to RAID Volume Page 1.
* Added PhysicalPort field to SAS Expander pages 0 and 1.
* 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1.
* Added Enclosure/Slot boot device format to BIOS Page 2.
* New status value for RAID Volume Page 0 VolumeStatus
* (VolumeState subfield).
* New value for RAID Physical Page 0 InactiveStatus.
* Added Inactive Volume Member flag RAID Physical Disk
* Page 0 PhysDiskStatus field.
* New physical mapping mode in SAS IO Unit Page 2.
* Added CONFIG_PAGE_SAS_ENCLOSURE_0.
* Added Slot and Enclosure fields to SAS Device Page 0.
* 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
* Added more RAID type defines to IOC Page 2.
* Added Port Enable Delay settings to BIOS Page 1.
* Added Bad Block Table Full define to RAID Volume Page 0.
* Added Previous State defines to RAID Physical Disk
* Page 0.
* Added Max Sata Targets define for DiscoveryStatus field
* of SAS IO Unit Page 0.
* Added Device Self Test to Control Flags of SAS IO Unit
* Page 1.
* Added Direct Attach Starting Slot Number define for SAS
* IO Unit Page 2.
* Added new fields in SAS Device Page 2 for enclosure
* mapping.
* Added OwnerDevHandle and Flags field to SAS PHY Page 0.
* Added IOC GPIO Flags define to SAS Enclosure Page 0.
* Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from
* Manufacturing Page 4.
* Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
* Added NumDevsPerEnclosure field to SAS IO Unit page 2.
* Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
* define.
* Added EnclosureHandle field to SAS Expander page 0.
* Removed redundant NumTableEntriesProg field from SAS
* Expander Page 1.
* 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
* SAS1078.
* Added more defines for Manufacturing Page 4 Flags field.
* Added more defines for IOCSettings and added
* ExpanderSpinup field to Bios Page 1.
* Added postpone SATA Init bit to SAS IO Unit Page 1
* ControlFlags.
* Changed LogEntry format for Log Page 0.
* 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4.
* Added Manufacturing Page 7.
* Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
* Added IOC Page 6.
* Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
* Added MaxLBAHigh field to RAID Volume Page 0.
* Added Nvdata version fields to SAS IO Unit Page 0.
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
* ReportDeviceMissingDelay, and IODeviceMissingDelay
* fields to SAS IO Unit Page 1.
* 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
* Manufacturing Page 5.
* Added Manufacturing pages 8 through 10.
* Added defines for supported metadata size bits in
* CapabilitiesFlags field of IOC Page 6.
* Added defines for metadata size bits in VolumeSettings
* field of RAID Volume Page 0.
* Added SATA Link Reset settings, Enable SATA Asynchronous
* Notification bit, and HideNonZeroAttachedPhyIdentifiers
* bit to AdditionalControlFlags field of SAS IO Unit
* Page 1.
* Added defines for Enclosure Devices Unmapped and
* Device Limit Exceeded bits in Status field of SAS IO
* Unit Page 2.
* Added more AccessStatus values for SAS Device Page 0.
* Added bit for SATA Asynchronous Notification Support in
* Flags field of SAS Device Page 0.
* 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4.
* Added Disable SMART Polling for CapabilitiesFlags of
* IOC Page 6.
* Added Disable SMART Polling to DeviceSettings of BIOS
* Page 1.
* Added Multi-Port Domain bit for DiscoveryStatus field
* of SAS IO Unit Page.
* Added Multi-Port Domain Illegal flag for SAS IO Unit
* Page 1 AdditionalControlFlags field.
* 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID
* Metadata bit to Manufacturing Page 4 ExtFlags field.
* Added Internal Connector to End Device Present bit to
* Expander Page 0 Flags field.
* Fixed define for
* MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
* --------------------------------------------------------------------------
mpi_init.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* 03-27-01 01.01.04 Added structure offset comments.
* 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET.
* Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for
* MSG_SCSI_IO_REPLY.
* 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure
* Processor messages.
* 10-04-01 01.02.04 Added defines for SEP request Action field.
* 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
* for SCSI IO requests.
* 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP.
* 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request.
* Added new word to MSG_SCSI_IO_REPLY to add TaskTag field
* and a reserved U16.
* Added new MSG_SCSI_IO32_REQUEST structure.
* Added a TaskType of Clear Task Set to SCSI
* Task Management request.
* 12-07-04 01.05.02 Added support for Task Management Query Task.
* 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support
* WWID addressing.
* 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request.
* Removed SCSI IO 32 Request.
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
* 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
* Added four new defines for SEP SlotStatus.
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
* 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
* 02-28-07 01.05.09 Defined two new MsgFlags bits for SCSI Task Management
* Request: Do Not Send Task IU and Soft Reset Option.
* --------------------------------------------------------------------------
mpi_targ.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure.
* Corrected DECSRIPTOR typo to DESCRIPTOR.
* 11-02-00 01.01.01 Original release for post 1.0 work
* Modified target mode to use IoIndex instead of
* HostIndex and IocIndex. Added Alias.
* 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER
* and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and
* MPI_TARGET_FCP_CMD_BUFFER.
* 03-27-01 01.01.04 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU.
* Added PriorityReason field to some replies and
* defined more PriorityReason codes.
* Added some defines for to support previous version
* of MPI.
* 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY.
* 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY.
* 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper
* byte ordering.
* 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include
* one bit.
* Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER.
* 09-16-02 01.02.07 Added flags for confirmed completion.
* Added PRIORITY_REASON_TARGET_BUSY.
* 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER.
* 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added new request message structures for
* MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
* MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, and
* MSG_TARGET_ASSIST_EXT_REQUEST.
* Added new structures for SAS SSP Command buffer, SSP
* Task buffer, and SSP Status IU.
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
* 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
* 03-27-06 01.05.06 Added a comment.
* --------------------------------------------------------------------------
mpi_fc.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added messages for Common Transport Send and
* Primitive Send.
* 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix
* and modified the FcPrimitiveSend flags.
* 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger
* field.
* Added FC_ABORT_TYPE_CT_SEND_REQUEST and
* FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request.
* Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND.
* 02-20-01 01.01.05 Started using MPI_POINTER.
* 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY
* and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED.
* Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define.
* Added structure offset comments.
* 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 09-28-01 01.02.02 Change name of reserved field in
* MSG_LINK_SERVICE_RSP_REPLY.
* 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests.
* 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
mpi_lan.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY.
* Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY.
* Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions.
* 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec.
* 06-30-00 01.00.04 Added Context Reply definitions per revised proposal.
* Changed transaction context usage to bucket/buffer.
* 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition
* to lan private header file
* 11-02-00 01.01.01 Original release for post 1.0 work
* 02-20-01 01.01.02 Started using MPI_POINTER.
* 03-27-01 01.01.03 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
mpi_raid.h
* 02-27-01 01.01.01 Original release for this file.
* 03-27-01 01.01.02 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines.
* 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes.
* 10-04-01 01.02.03 Added ActionData defines for
* MPI_RAID_ACTION_DELETE_VOLUME action.
* 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC.
* 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT.
* 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME,
* MPI_RAID_ACTION_INACTIVATE_VOLUME, and
* MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
* 07-12-02 01.02.07 Added structures for Mailbox request and reply.
* 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST.
* 04-01-03 01.02.09 New action data option flag for
* MPI_RAID_ACTION_DELETE_VOLUME.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 01-15-05 01.05.02 Added defines for the two new RAID Actions for
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
* associated defines.
* --------------------------------------------------------------------------
mpi_tool.h
* 08-08-01 01.02.01 Original release.
* 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines.
* 01-16-04 01.02.03 Added defines and structures for new tools
*. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and
* MPI_TOOLBOX_FC_MANAGEMENT_TOOL.
* 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and
* Diagnostic Release requests and replies.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT.
* 02-09-05 01.05.03 Added frame size option to FC management tool.
* Added Beacon tool to the Toolbox.
* --------------------------------------------------------------------------
mpi_inb.h
* 05-11-04 01.03.01 Original release.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
mpi_sas.h
* 08-19-04 01.05.01 Original release.
* 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
* Added PrimFlags and Primitive field to SAS IO Unit
* Control request, and added a new operation code.
* 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
* --------------------------------------------------------------------------
mpi_type.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 08-30-05 01.05.02 Added PowerPC option to #ifdef's.
* --------------------------------------------------------------------------
mpi_history.txt Parts list history
Filename 01.05.15 01.05.15
---------- -------- --------
mpi.h 01.05.12 01.05.13
mpi_ioc.h 01.05.13 01.05.14
mpi_cnfg.h 01.05.14 01.05.15
mpi_init.h 01.05.09 01.05.09
mpi_targ.h 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.03 01.05.03
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
mpi_sas.h 01.05.04 01.05.04
mpi_type.h 01.05.02 01.05.02
Filename 01.05.14 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
mpi_ioc.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
mpi_cnfg.h 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
mpi_init.h 01.05.08 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
mpi_targ.h 01.05.06 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_sas.h 01.05.04 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02 01.05.01
mpi_ioc.h 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02
mpi_cnfg.h 01.05.07 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
mpi_init.h 01.05.03 01.05.03 01.05.03 01.05.02 01.05.02 01.05.01
mpi_targ.h 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
mpi_tool.h 01.05.03 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_sas.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
Filename 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.05.01 01.05.01 01.03.01 01.02.12 01.02.11 01.02.10
mpi_ioc.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.08 01.02.08
mpi_cnfg.h 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12
mpi_init.h 01.05.01 01.05.01 01.03.01 01.02.07 01.02.07 01.02.07
mpi_targ.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09
mpi_fc.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.04 01.02.03
mpi_lan.h 01.05.01 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01
mpi_raid.h 01.05.01 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09
mpi_tool.h 01.05.02 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01
mpi_inb.h 01.05.01 01.05.01 01.03.01
mpi_sas.h 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.03 01.02.02
Filename 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.05 01.02.04
mpi_ioc.h 01.02.07 01.02.06 01.02.06 01.02.06 01.02.06 01.02.05
mpi_cnfg.h 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06
mpi_init.h 01.02.06 01.02.06 01.02.05 01.02.05 01.02.05 01.02.04
mpi_targ.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.06 01.02.05
mpi_fc.h 01.02.03 01.02.03 01.02.03 01.02.03 01.02.03 01.02.02
mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01
mpi_raid.h 01.02.09 01.02.08 01.02.07 01.02.07 01.02.06 01.02.05
mpi_tool.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01
mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02
Filename 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.10
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.02.03 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07
mpi_ioc.h 01.02.04 01.02.03 01.02.03 01.02.02 01.02.01 01.01.07
mpi_cnfg.h 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.11
mpi_init.h 01.02.04 01.02.04 01.02.03 01.02.02 01.02.01 01.01.05
mpi_targ.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.04
mpi_fc.h 01.02.02 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07
mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.01.03
mpi_raid.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.02
mpi_tool.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01
mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01 01.01.02
Filename 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 01.01.04
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.01.06 01.01.06 01.01.05 01.01.04 01.01.04 01.01.03
mpi_ioc.h 01.01.06 01.01.05 01.01.04 01.01.03 01.01.03 01.01.03
mpi_cnfg.h 01.01.10 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05
mpi_init.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02
mpi_targ.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02
mpi_fc.h 01.01.06 01.01.05 01.01.05 01.01.04 01.01.04 01.01.03
mpi_lan.h 01.01.03 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01
mpi_raid.h 01.01.02 01.01.01
mpi_type.h 01.01.02 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01
Filename 01.01.03 01.01.02 01.01.01 01.00.07 01.00.06 01.00.05
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.01.02 01.01.02 01.01.01 01.00.04 01.00.04 01.00.03
mpi_ioc.h 01.01.02 01.01.02 01.01.01 01.00.05 01.00.04 01.00.03
mpi_cnfg.h 01.01.04 01.01.03 01.01.01 01.00.05 01.00.05 01.00.04
mpi_init.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02
mpi_targ.h 01.01.01 01.01.01 01.01.01 01.00.02 01.00.02 01.00.02
mpi_fc.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02
mpi_lan.h 01.01.01 01.01.01 01.01.01 01.00.05 01.00.05 01.00.05
mpi_type.h 01.01.01 01.01.01 01.01.01 01.00.01 01.00.01 01.00.01
Filename 01.00.04 01.00.03 01.00.02 01.00.01 00.10.02 00.10.01
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.02 00.10.01
mpi_ioc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01
mpi_cnfg.h 01.00.03 01.00.02 01.00.02 01.00.01 00.10.01 00.10.01
mpi_init.h 01.00.02 01.00.02 01.00.02 01.00.01 00.10.02 00.10.01
mpi_targ.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01
mpi_fc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.01 00.10.01
mpi_lan.h 01.00.03 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01
mpi_type.h 01.00.01 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01
* --------------------------------------------------------------------------