| /* $Id: t1pci.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $ |
| * |
| * Module for AVM T1 PCI-card. |
| * |
| * Copyright 1999 by Carsten Paeth <calle@calle.de> |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/skbuff.h> |
| #include <linux/delay.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/capi.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| #include <linux/isdn/capicmd.h> |
| #include <linux/isdn/capiutil.h> |
| #include <linux/isdn/capilli.h> |
| #include "avmcard.h" |
| |
| #undef CONFIG_T1PCI_DEBUG |
| #undef CONFIG_T1PCI_POLLDEBUG |
| |
| /* ------------------------------------------------------------- */ |
| static char *revision = "$Revision: 1.1.2.2 $"; |
| /* ------------------------------------------------------------- */ |
| |
| static struct pci_device_id t1pci_pci_tbl[] = { |
| { PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_T1, PCI_ANY_ID, PCI_ANY_ID }, |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, t1pci_pci_tbl); |
| MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM T1 PCI card"); |
| MODULE_AUTHOR("Carsten Paeth"); |
| MODULE_LICENSE("GPL"); |
| |
| /* ------------------------------------------------------------- */ |
| |
| static char *t1pci_procinfo(struct capi_ctr *ctrl); |
| |
| static int t1pci_add_card(struct capicardparams *p, struct pci_dev *pdev) |
| { |
| avmcard *card; |
| avmctrl_info *cinfo; |
| int retval; |
| |
| card = b1_alloc_card(1); |
| if (!card) { |
| printk(KERN_WARNING "t1pci: no memory.\n"); |
| retval = -ENOMEM; |
| goto err; |
| } |
| |
| card->dma = avmcard_dma_alloc("t1pci", pdev, 2048+128, 2048+128); |
| if (!card->dma) { |
| printk(KERN_WARNING "t1pci: no memory.\n"); |
| retval = -ENOMEM; |
| goto err_free; |
| } |
| |
| cinfo = card->ctrlinfo; |
| sprintf(card->name, "t1pci-%x", p->port); |
| card->port = p->port; |
| card->irq = p->irq; |
| card->membase = p->membase; |
| card->cardtype = avm_t1pci; |
| |
| if (!request_region(card->port, AVMB1_PORTLEN, card->name)) { |
| printk(KERN_WARNING "t1pci: ports 0x%03x-0x%03x in use.\n", |
| card->port, card->port + AVMB1_PORTLEN); |
| retval = -EBUSY; |
| goto err_free_dma; |
| } |
| |
| card->mbase = ioremap(card->membase, 64); |
| if (!card->mbase) { |
| printk(KERN_NOTICE "t1pci: can't remap memory at 0x%lx\n", |
| card->membase); |
| retval = -EIO; |
| goto err_release_region; |
| } |
| |
| b1dma_reset(card); |
| |
| retval = t1pci_detect(card); |
| if (retval != 0) { |
| if (retval < 6) |
| printk(KERN_NOTICE "t1pci: NO card at 0x%x (%d)\n", |
| card->port, retval); |
| else |
| printk(KERN_NOTICE "t1pci: card at 0x%x, but cable not connected or T1 has no power (%d)\n", |
| card->port, retval); |
| retval = -EIO; |
| goto err_unmap; |
| } |
| b1dma_reset(card); |
| |
| retval = request_irq(card->irq, b1dma_interrupt, IRQF_SHARED, card->name, card); |
| if (retval) { |
| printk(KERN_ERR "t1pci: unable to get IRQ %d.\n", card->irq); |
| retval = -EBUSY; |
| goto err_unmap; |
| } |
| |
| cinfo->capi_ctrl.owner = THIS_MODULE; |
| cinfo->capi_ctrl.driver_name = "t1pci"; |
| cinfo->capi_ctrl.driverdata = cinfo; |
| cinfo->capi_ctrl.register_appl = b1dma_register_appl; |
| cinfo->capi_ctrl.release_appl = b1dma_release_appl; |
| cinfo->capi_ctrl.send_message = b1dma_send_message; |
| cinfo->capi_ctrl.load_firmware = b1dma_load_firmware; |
| cinfo->capi_ctrl.reset_ctr = b1dma_reset_ctr; |
| cinfo->capi_ctrl.procinfo = t1pci_procinfo; |
| cinfo->capi_ctrl.ctr_read_proc = b1dmactl_read_proc; |
| strcpy(cinfo->capi_ctrl.name, card->name); |
| |
| retval = attach_capi_ctr(&cinfo->capi_ctrl); |
| if (retval) { |
| printk(KERN_ERR "t1pci: attach controller failed.\n"); |
| retval = -EBUSY; |
| goto err_free_irq; |
| } |
| card->cardnr = cinfo->capi_ctrl.cnr; |
| |
| printk(KERN_INFO "t1pci: AVM T1 PCI at i/o %#x, irq %d, mem %#lx\n", |
| card->port, card->irq, card->membase); |
| |
| pci_set_drvdata(pdev, card); |
| return 0; |
| |
| err_free_irq: |
| free_irq(card->irq, card); |
| err_unmap: |
| iounmap(card->mbase); |
| err_release_region: |
| release_region(card->port, AVMB1_PORTLEN); |
| err_free_dma: |
| avmcard_dma_free(card->dma); |
| err_free: |
| b1_free_card(card); |
| err: |
| return retval; |
| } |
| |
| /* ------------------------------------------------------------- */ |
| |
| static void t1pci_remove(struct pci_dev *pdev) |
| { |
| avmcard *card = pci_get_drvdata(pdev); |
| avmctrl_info *cinfo = card->ctrlinfo; |
| |
| b1dma_reset(card); |
| |
| detach_capi_ctr(&cinfo->capi_ctrl); |
| free_irq(card->irq, card); |
| iounmap(card->mbase); |
| release_region(card->port, AVMB1_PORTLEN); |
| avmcard_dma_free(card->dma); |
| b1_free_card(card); |
| } |
| |
| /* ------------------------------------------------------------- */ |
| |
| static char *t1pci_procinfo(struct capi_ctr *ctrl) |
| { |
| avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata); |
| |
| if (!cinfo) |
| return ""; |
| sprintf(cinfo->infobuf, "%s %s 0x%x %d 0x%lx", |
| cinfo->cardname[0] ? cinfo->cardname : "-", |
| cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-", |
| cinfo->card ? cinfo->card->port : 0x0, |
| cinfo->card ? cinfo->card->irq : 0, |
| cinfo->card ? cinfo->card->membase : 0 |
| ); |
| return cinfo->infobuf; |
| } |
| |
| /* ------------------------------------------------------------- */ |
| |
| static int __devinit t1pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| struct capicardparams param; |
| int retval; |
| |
| if (pci_enable_device(dev) < 0) { |
| printk(KERN_ERR "t1pci: failed to enable AVM-T1-PCI\n"); |
| return -ENODEV; |
| } |
| pci_set_master(dev); |
| |
| param.port = pci_resource_start(dev, 1); |
| param.irq = dev->irq; |
| param.membase = pci_resource_start(dev, 0); |
| |
| printk(KERN_INFO "t1pci: PCI BIOS reports AVM-T1-PCI at i/o %#x, irq %d, mem %#x\n", |
| param.port, param.irq, param.membase); |
| |
| retval = t1pci_add_card(¶m, dev); |
| if (retval != 0) { |
| printk(KERN_ERR "t1pci: no AVM-T1-PCI at i/o %#x, irq %d detected, mem %#x\n", |
| param.port, param.irq, param.membase); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static struct pci_driver t1pci_pci_driver = { |
| .name = "t1pci", |
| .id_table = t1pci_pci_tbl, |
| .probe = t1pci_probe, |
| .remove = t1pci_remove, |
| }; |
| |
| static struct capi_driver capi_driver_t1pci = { |
| .name = "t1pci", |
| .revision = "1.0", |
| }; |
| |
| static int __init t1pci_init(void) |
| { |
| char *p; |
| char rev[32]; |
| int err; |
| |
| if ((p = strchr(revision, ':')) != NULL && p[1]) { |
| strlcpy(rev, p + 2, 32); |
| if ((p = strchr(rev, '$')) != NULL && p > rev) |
| *(p-1) = 0; |
| } else |
| strcpy(rev, "1.0"); |
| |
| err = pci_register_driver(&t1pci_pci_driver); |
| if (!err) { |
| strlcpy(capi_driver_t1pci.revision, rev, 32); |
| register_capi_driver(&capi_driver_t1pci); |
| printk(KERN_INFO "t1pci: revision %s\n", rev); |
| } |
| return err; |
| } |
| |
| static void __exit t1pci_exit(void) |
| { |
| unregister_capi_driver(&capi_driver_t1pci); |
| pci_unregister_driver(&t1pci_pci_driver); |
| } |
| |
| module_init(t1pci_init); |
| module_exit(t1pci_exit); |