blob: 11d79eb384c882c23556ae69e1005ed29ef2d10a [file] [log] [blame]
/*
* TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
*
* Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
*
* Based on the dvb-usb-framework code and the
* original Terratec Cinergy T2 driver by:
*
* Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
* Holger Waechtler <holger@qanu.de>
*
* Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifndef _DVB_USB_CINERGYT2_H_
#define _DVB_USB_CINERGYT2_H_
#include <linux/usb/input.h>
#define DVB_USB_LOG_PREFIX "cinergyT2"
#include "dvb-usb.h"
#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
extern int dvb_usb_cinergyt2_debug;
#define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args)
#define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args)
#define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args)
#define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args)
#define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args)
#define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args)
#define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args)
#define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args)
#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args)
enum cinergyt2_ep1_cmd {
CINERGYT2_EP1_PID_TABLE_RESET = 0x01,
CINERGYT2_EP1_PID_SETUP = 0x02,
CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03,
CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04,
CINERGYT2_EP1_GET_TUNER_STATUS = 0x05,
CINERGYT2_EP1_START_SCAN = 0x06,
CINERGYT2_EP1_CONTINUE_SCAN = 0x07,
CINERGYT2_EP1_GET_RC_EVENTS = 0x08,
CINERGYT2_EP1_SLEEP_MODE = 0x09,
CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A
};
struct dvbt_get_status_msg {
uint32_t freq;
uint8_t bandwidth;
uint16_t tps;
uint8_t flags;
uint16_t gain;
uint8_t snr;
uint32_t viterbi_error_rate;
uint32_t rs_error_rate;
uint32_t uncorrected_block_count;
uint8_t lock_bits;
uint8_t prev_lock_bits;
} __attribute__((packed));
struct dvbt_set_parameters_msg {
uint8_t cmd;
uint32_t freq;
uint8_t bandwidth;
uint16_t tps;
uint8_t flags;
} __attribute__((packed));
extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d);
#endif /* _DVB_USB_CINERGYT2_H_ */