| /* |
| * Hauppauge HD PVR USB driver |
| * |
| * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2008 Janne Grunau (j@jannau.net) |
| * Copyright (C) 2008 John Poet |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/uaccess.h> |
| #include <asm/atomic.h> |
| #include <linux/usb.h> |
| #include <linux/mutex.h> |
| #include <linux/i2c.h> |
| |
| #include <linux/videodev2.h> |
| #include <media/v4l2-dev.h> |
| #include <media/v4l2-common.h> |
| |
| #include "hdpvr.h" |
| |
| static int video_nr[HDPVR_MAX] = {[0 ... (HDPVR_MAX - 1)] = UNSET}; |
| module_param_array(video_nr, int, NULL, 0); |
| MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); |
| |
| /* holds the number of currently registered devices */ |
| static atomic_t dev_nr = ATOMIC_INIT(-1); |
| |
| int hdpvr_debug; |
| module_param(hdpvr_debug, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(hdpvr_debug, "enable debugging output"); |
| |
| uint default_video_input = HDPVR_VIDEO_INPUTS; |
| module_param(default_video_input, uint, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / " |
| "1=S-Video / 2=Composite"); |
| |
| uint default_audio_input = HDPVR_AUDIO_INPUTS; |
| module_param(default_audio_input, uint, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / " |
| "1=RCA front / 2=S/PDIF"); |
| |
| static int boost_audio; |
| module_param(boost_audio, bool, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(boost_audio, "boost the audio signal"); |
| |
| |
| /* table of devices that work with this driver */ |
| static struct usb_device_id hdpvr_table[] = { |
| { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID) }, |
| { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID1) }, |
| { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID2) }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, hdpvr_table); |
| |
| |
| void hdpvr_delete(struct hdpvr_device *dev) |
| { |
| hdpvr_free_buffers(dev); |
| |
| if (dev->video_dev) |
| video_device_release(dev->video_dev); |
| |
| usb_put_dev(dev->udev); |
| } |
| |
| static void challenge(u8 *bytes) |
| { |
| u64 *i64P, tmp64; |
| uint i, idx; |
| |
| for (idx = 0; idx < 32; ++idx) { |
| |
| if (idx & 0x3) |
| bytes[(idx >> 3) + 3] = bytes[(idx >> 2) & 0x3]; |
| |
| switch (idx & 0x3) { |
| case 0x3: |
| bytes[2] += bytes[3] * 4 + bytes[4] + bytes[5]; |
| bytes[4] += bytes[(idx & 0x1) * 2] * 9 + 9; |
| break; |
| case 0x1: |
| bytes[0] *= 8; |
| bytes[0] += 7*idx + 4; |
| bytes[6] += bytes[3] * 3; |
| break; |
| case 0x0: |
| bytes[3 - (idx >> 3)] = bytes[idx >> 2]; |
| bytes[5] += bytes[6] * 3; |
| for (i = 0; i < 3; i++) |
| bytes[3] *= bytes[3] + 1; |
| break; |
| case 0x2: |
| for (i = 0; i < 3; i++) |
| bytes[1] *= bytes[6] + 1; |
| for (i = 0; i < 3; i++) { |
| i64P = (u64 *)bytes; |
| tmp64 = le64_to_cpup(i64P); |
| tmp64 <<= bytes[7] & 0x0f; |
| *i64P += cpu_to_le64(tmp64); |
| } |
| break; |
| } |
| } |
| } |
| |
| /* try to init the device like the windows driver */ |
| static int device_authorization(struct hdpvr_device *dev) |
| { |
| |
| int ret, retval = -ENOMEM; |
| char request_type = 0x38, rcv_request = 0x81; |
| char *response; |
| #ifdef HDPVR_DEBUG |
| size_t buf_size = 46; |
| char *print_buf = kzalloc(5*buf_size+1, GFP_KERNEL); |
| if (!print_buf) { |
| v4l2_err(&dev->v4l2_dev, "Out of memory\n"); |
| return retval; |
| } |
| #endif |
| |
| mutex_lock(&dev->usbc_mutex); |
| ret = usb_control_msg(dev->udev, |
| usb_rcvctrlpipe(dev->udev, 0), |
| rcv_request, 0x80 | request_type, |
| 0x0400, 0x0003, |
| dev->usbc_buf, 46, |
| 10000); |
| if (ret != 46) { |
| v4l2_err(&dev->v4l2_dev, |
| "unexpected answer of status request, len %d\n", ret); |
| goto unlock; |
| } |
| #ifdef HDPVR_DEBUG |
| else { |
| hex_dump_to_buffer(dev->usbc_buf, 46, 16, 1, print_buf, |
| 5*buf_size+1, 0); |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, |
| "Status request returned, len %d: %s\n", |
| ret, print_buf); |
| } |
| #endif |
| if (dev->usbc_buf[1] == HDPVR_FIRMWARE_VERSION) { |
| dev->flags &= ~HDPVR_FLAG_AC3_CAP; |
| } else if (dev->usbc_buf[1] == HDPVR_FIRMWARE_VERSION_AC3) { |
| dev->flags |= HDPVR_FLAG_AC3_CAP; |
| } else if (dev->usbc_buf[1] > HDPVR_FIRMWARE_VERSION_AC3) { |
| v4l2_info(&dev->v4l2_dev, "untested firmware version 0x%x, " |
| "the driver might not work\n", dev->usbc_buf[1]); |
| dev->flags |= HDPVR_FLAG_AC3_CAP; |
| } else { |
| v4l2_err(&dev->v4l2_dev, "unknown firmware version 0x%x\n", |
| dev->usbc_buf[1]); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| response = dev->usbc_buf+38; |
| #ifdef HDPVR_DEBUG |
| hex_dump_to_buffer(response, 8, 16, 1, print_buf, 5*buf_size+1, 0); |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "challenge: %s\n", |
| print_buf); |
| #endif |
| challenge(response); |
| #ifdef HDPVR_DEBUG |
| hex_dump_to_buffer(response, 8, 16, 1, print_buf, 5*buf_size+1, 0); |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, " response: %s\n", |
| print_buf); |
| #endif |
| |
| msleep(100); |
| ret = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| 0xd1, 0x00 | request_type, |
| 0x0000, 0x0000, |
| response, 8, |
| 10000); |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, |
| "magic request returned %d\n", ret); |
| |
| retval = ret != 8; |
| unlock: |
| mutex_unlock(&dev->usbc_mutex); |
| return retval; |
| } |
| |
| static int hdpvr_device_init(struct hdpvr_device *dev) |
| { |
| int ret; |
| u8 *buf; |
| struct hdpvr_video_info *vidinf; |
| |
| if (device_authorization(dev)) |
| return -EACCES; |
| |
| /* default options for init */ |
| hdpvr_set_options(dev); |
| |
| /* set filter options */ |
| mutex_lock(&dev->usbc_mutex); |
| buf = dev->usbc_buf; |
| buf[0] = 0x03; buf[1] = 0x03; buf[2] = 0x00; buf[3] = 0x00; |
| ret = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| 0x01, 0x38, |
| CTRL_LOW_PASS_FILTER_VALUE, CTRL_DEFAULT_INDEX, |
| buf, 4, |
| 1000); |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, |
| "control request returned %d\n", ret); |
| mutex_unlock(&dev->usbc_mutex); |
| |
| vidinf = get_video_info(dev); |
| if (!vidinf) |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, |
| "no valid video signal or device init failed\n"); |
| else |
| kfree(vidinf); |
| |
| /* enable fan and bling leds */ |
| mutex_lock(&dev->usbc_mutex); |
| buf[0] = 0x1; |
| ret = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| 0xd4, 0x38, 0, 0, buf, 1, |
| 1000); |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, |
| "control request returned %d\n", ret); |
| |
| /* boost analog audio */ |
| buf[0] = boost_audio; |
| ret = usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| 0xd5, 0x38, 0, 0, buf, 1, |
| 1000); |
| v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, |
| "control request returned %d\n", ret); |
| mutex_unlock(&dev->usbc_mutex); |
| |
| dev->status = STATUS_IDLE; |
| return 0; |
| } |
| |
| static const struct hdpvr_options hdpvr_default_options = { |
| .video_std = HDPVR_60HZ, |
| .video_input = HDPVR_COMPONENT, |
| .audio_input = HDPVR_RCA_BACK, |
| .bitrate = 65, /* 6 mbps */ |
| .peak_bitrate = 90, /* 9 mbps */ |
| .bitrate_mode = HDPVR_CONSTANT, |
| .gop_mode = HDPVR_SIMPLE_IDR_GOP, |
| .audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC, |
| .brightness = 0x86, |
| .contrast = 0x80, |
| .hue = 0x80, |
| .saturation = 0x80, |
| .sharpness = 0x80, |
| }; |
| |
| static int hdpvr_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct hdpvr_device *dev; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| size_t buffer_size; |
| int i; |
| int retval = -ENOMEM; |
| |
| /* allocate memory for our device state and initialize it */ |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| err("Out of memory"); |
| goto error; |
| } |
| |
| /* register v4l2_device early so it can be used for printks */ |
| if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) { |
| err("v4l2_device_register failed"); |
| goto error; |
| } |
| |
| mutex_init(&dev->io_mutex); |
| mutex_init(&dev->i2c_mutex); |
| mutex_init(&dev->usbc_mutex); |
| dev->usbc_buf = kmalloc(64, GFP_KERNEL); |
| if (!dev->usbc_buf) { |
| v4l2_err(&dev->v4l2_dev, "Out of memory\n"); |
| goto error; |
| } |
| |
| init_waitqueue_head(&dev->wait_buffer); |
| init_waitqueue_head(&dev->wait_data); |
| |
| dev->workqueue = create_singlethread_workqueue("hdpvr_buffer"); |
| if (!dev->workqueue) |
| goto error; |
| |
| /* init video transfer queues */ |
| INIT_LIST_HEAD(&dev->free_buff_list); |
| INIT_LIST_HEAD(&dev->rec_buff_list); |
| |
| dev->options = hdpvr_default_options; |
| |
| if (default_video_input < HDPVR_VIDEO_INPUTS) |
| dev->options.video_input = default_video_input; |
| |
| if (default_audio_input < HDPVR_AUDIO_INPUTS) |
| dev->options.audio_input = default_audio_input; |
| |
| dev->udev = usb_get_dev(interface_to_usbdev(interface)); |
| |
| /* set up the endpoint information */ |
| /* use only the first bulk-in and bulk-out endpoints */ |
| iface_desc = interface->cur_altsetting; |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| |
| if (!dev->bulk_in_endpointAddr && |
| usb_endpoint_is_bulk_in(endpoint)) { |
| /* USB interface description is buggy, reported max |
| * packet size is 512 bytes, windows driver uses 8192 */ |
| buffer_size = 8192; |
| dev->bulk_in_size = buffer_size; |
| dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; |
| } |
| |
| } |
| if (!dev->bulk_in_endpointAddr) { |
| v4l2_err(&dev->v4l2_dev, "Could not find bulk-in endpoint\n"); |
| goto error; |
| } |
| |
| /* init the device */ |
| if (hdpvr_device_init(dev)) { |
| v4l2_err(&dev->v4l2_dev, "device init failed\n"); |
| goto error; |
| } |
| |
| mutex_lock(&dev->io_mutex); |
| if (hdpvr_alloc_buffers(dev, NUM_BUFFERS)) { |
| mutex_unlock(&dev->io_mutex); |
| v4l2_err(&dev->v4l2_dev, |
| "allocating transfer buffers failed\n"); |
| goto error; |
| } |
| mutex_unlock(&dev->io_mutex); |
| |
| if (hdpvr_register_videodev(dev, &interface->dev, |
| video_nr[atomic_inc_return(&dev_nr)])) { |
| v4l2_err(&dev->v4l2_dev, "registering videodev failed\n"); |
| goto error; |
| } |
| |
| #ifdef CONFIG_I2C |
| /* until i2c is working properly */ |
| retval = 0; /* hdpvr_register_i2c_adapter(dev); */ |
| if (retval < 0) { |
| v4l2_err(&dev->v4l2_dev, "registering i2c adapter failed\n"); |
| goto error; |
| } |
| #endif /* CONFIG_I2C */ |
| |
| /* save our data pointer in this interface device */ |
| usb_set_intfdata(interface, dev); |
| |
| /* let the user know what node this device is now attached to */ |
| v4l2_info(&dev->v4l2_dev, "device now attached to %s\n", |
| video_device_node_name(dev->video_dev)); |
| return 0; |
| |
| error: |
| if (dev) { |
| /* this frees allocated memory */ |
| hdpvr_delete(dev); |
| } |
| return retval; |
| } |
| |
| static void hdpvr_disconnect(struct usb_interface *interface) |
| { |
| struct hdpvr_device *dev; |
| |
| dev = usb_get_intfdata(interface); |
| usb_set_intfdata(interface, NULL); |
| |
| /* prevent more I/O from starting and stop any ongoing */ |
| mutex_lock(&dev->io_mutex); |
| dev->status = STATUS_DISCONNECTED; |
| v4l2_device_disconnect(&dev->v4l2_dev); |
| video_unregister_device(dev->video_dev); |
| wake_up_interruptible(&dev->wait_data); |
| wake_up_interruptible(&dev->wait_buffer); |
| mutex_unlock(&dev->io_mutex); |
| msleep(100); |
| flush_workqueue(dev->workqueue); |
| mutex_lock(&dev->io_mutex); |
| hdpvr_cancel_queue(dev); |
| destroy_workqueue(dev->workqueue); |
| mutex_unlock(&dev->io_mutex); |
| |
| /* deregister I2C adapter */ |
| #ifdef CONFIG_I2C |
| mutex_lock(&dev->i2c_mutex); |
| if (dev->i2c_adapter) |
| i2c_del_adapter(dev->i2c_adapter); |
| kfree(dev->i2c_adapter); |
| dev->i2c_adapter = NULL; |
| mutex_unlock(&dev->i2c_mutex); |
| #endif /* CONFIG_I2C */ |
| |
| atomic_dec(&dev_nr); |
| |
| v4l2_info(&dev->v4l2_dev, "device %s disconnected\n", |
| video_device_node_name(dev->video_dev)); |
| |
| v4l2_device_unregister(&dev->v4l2_dev); |
| kfree(dev->usbc_buf); |
| kfree(dev); |
| } |
| |
| |
| static struct usb_driver hdpvr_usb_driver = { |
| .name = "hdpvr", |
| .probe = hdpvr_probe, |
| .disconnect = hdpvr_disconnect, |
| .id_table = hdpvr_table, |
| }; |
| |
| static int __init hdpvr_init(void) |
| { |
| int result; |
| |
| /* register this driver with the USB subsystem */ |
| result = usb_register(&hdpvr_usb_driver); |
| if (result) |
| err("usb_register failed. Error number %d", result); |
| |
| return result; |
| } |
| |
| static void __exit hdpvr_exit(void) |
| { |
| /* deregister this driver with the USB subsystem */ |
| usb_deregister(&hdpvr_usb_driver); |
| } |
| |
| module_init(hdpvr_init); |
| module_exit(hdpvr_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Janne Grunau"); |
| MODULE_DESCRIPTION("Hauppauge HD PVR driver"); |