| /* |
| * SPEAr Keyboard Driver |
| * Based on omap-keypad driver |
| * |
| * Copyright (C) 2010 ST Microelectronics |
| * Rajeev Kumar<rajeev-dlh.kumar@st.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/input.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_wakeup.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <plat/keyboard.h> |
| |
| /* Keyboard Registers */ |
| #define MODE_REG 0x00 /* 16 bit reg */ |
| #define STATUS_REG 0x0C /* 2 bit reg */ |
| #define DATA_REG 0x10 /* 8 bit reg */ |
| #define INTR_MASK 0x54 |
| |
| /* Register Values */ |
| /* |
| * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode |
| * control register as 1010010(82MHZ) |
| */ |
| #define PCLK_FREQ_MSK 0xA400 /* 82 MHz */ |
| #define START_SCAN 0x0100 |
| #define SCAN_RATE_10 0x0000 |
| #define SCAN_RATE_20 0x0004 |
| #define SCAN_RATE_40 0x0008 |
| #define SCAN_RATE_80 0x000C |
| #define MODE_KEYBOARD 0x0002 |
| #define DATA_AVAIL 0x2 |
| |
| #define KEY_MASK 0xFF000000 |
| #define KEY_VALUE 0x00FFFFFF |
| #define ROW_MASK 0xF0 |
| #define COLUMN_MASK 0x0F |
| #define ROW_SHIFT 4 |
| |
| struct spear_kbd { |
| struct input_dev *input; |
| struct resource *res; |
| void __iomem *io_base; |
| struct clk *clk; |
| unsigned int irq; |
| unsigned short last_key; |
| unsigned short keycodes[256]; |
| }; |
| |
| static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id) |
| { |
| struct spear_kbd *kbd = dev_id; |
| struct input_dev *input = kbd->input; |
| unsigned int key; |
| u8 sts, val; |
| |
| sts = readb(kbd->io_base + STATUS_REG); |
| if (sts & DATA_AVAIL) |
| return IRQ_NONE; |
| |
| if (kbd->last_key != KEY_RESERVED) { |
| input_report_key(input, kbd->last_key, 0); |
| kbd->last_key = KEY_RESERVED; |
| } |
| |
| /* following reads active (row, col) pair */ |
| val = readb(kbd->io_base + DATA_REG); |
| key = kbd->keycodes[val]; |
| |
| input_event(input, EV_MSC, MSC_SCAN, val); |
| input_report_key(input, key, 1); |
| input_sync(input); |
| |
| kbd->last_key = key; |
| |
| /* clear interrupt */ |
| writeb(0, kbd->io_base + STATUS_REG); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int spear_kbd_open(struct input_dev *dev) |
| { |
| struct spear_kbd *kbd = input_get_drvdata(dev); |
| int error; |
| u16 val; |
| |
| kbd->last_key = KEY_RESERVED; |
| |
| error = clk_enable(kbd->clk); |
| if (error) |
| return error; |
| |
| /* program keyboard */ |
| val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK; |
| writew(val, kbd->io_base + MODE_REG); |
| writeb(1, kbd->io_base + STATUS_REG); |
| |
| /* start key scan */ |
| val = readw(kbd->io_base + MODE_REG); |
| val |= START_SCAN; |
| writew(val, kbd->io_base + MODE_REG); |
| |
| return 0; |
| } |
| |
| static void spear_kbd_close(struct input_dev *dev) |
| { |
| struct spear_kbd *kbd = input_get_drvdata(dev); |
| u16 val; |
| |
| /* stop key scan */ |
| val = readw(kbd->io_base + MODE_REG); |
| val &= ~START_SCAN; |
| writew(val, kbd->io_base + MODE_REG); |
| |
| clk_disable(kbd->clk); |
| |
| kbd->last_key = KEY_RESERVED; |
| } |
| |
| static int __devinit spear_kbd_probe(struct platform_device *pdev) |
| { |
| const struct kbd_platform_data *pdata = pdev->dev.platform_data; |
| const struct matrix_keymap_data *keymap; |
| struct spear_kbd *kbd; |
| struct input_dev *input_dev; |
| struct resource *res; |
| int irq; |
| int error; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "Invalid platform data\n"); |
| return -EINVAL; |
| } |
| |
| keymap = pdata->keymap; |
| if (!keymap) { |
| dev_err(&pdev->dev, "no keymap defined\n"); |
| return -EINVAL; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "no keyboard resource defined\n"); |
| return -EBUSY; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "not able to get irq for the device\n"); |
| return irq; |
| } |
| |
| kbd = kzalloc(sizeof(*kbd), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!kbd || !input_dev) { |
| dev_err(&pdev->dev, "out of memory\n"); |
| error = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| kbd->input = input_dev; |
| kbd->irq = irq; |
| kbd->res = request_mem_region(res->start, resource_size(res), |
| pdev->name); |
| if (!kbd->res) { |
| dev_err(&pdev->dev, "keyboard region already claimed\n"); |
| error = -EBUSY; |
| goto err_free_mem; |
| } |
| |
| kbd->io_base = ioremap(res->start, resource_size(res)); |
| if (!kbd->io_base) { |
| dev_err(&pdev->dev, "ioremap failed for kbd_region\n"); |
| error = -ENOMEM; |
| goto err_release_mem_region; |
| } |
| |
| kbd->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(kbd->clk)) { |
| error = PTR_ERR(kbd->clk); |
| goto err_iounmap; |
| } |
| |
| input_dev->name = "Spear Keyboard"; |
| input_dev->phys = "keyboard/input0"; |
| input_dev->dev.parent = &pdev->dev; |
| input_dev->id.bustype = BUS_HOST; |
| input_dev->id.vendor = 0x0001; |
| input_dev->id.product = 0x0001; |
| input_dev->id.version = 0x0100; |
| input_dev->open = spear_kbd_open; |
| input_dev->close = spear_kbd_close; |
| |
| __set_bit(EV_KEY, input_dev->evbit); |
| if (pdata->rep) |
| __set_bit(EV_REP, input_dev->evbit); |
| input_set_capability(input_dev, EV_MSC, MSC_SCAN); |
| |
| input_dev->keycode = kbd->keycodes; |
| input_dev->keycodesize = sizeof(kbd->keycodes[0]); |
| input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes); |
| |
| matrix_keypad_build_keymap(keymap, ROW_SHIFT, |
| input_dev->keycode, input_dev->keybit); |
| |
| input_set_drvdata(input_dev, kbd); |
| |
| error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd); |
| if (error) { |
| dev_err(&pdev->dev, "request_irq fail\n"); |
| goto err_put_clk; |
| } |
| |
| error = input_register_device(input_dev); |
| if (error) { |
| dev_err(&pdev->dev, "Unable to register keyboard device\n"); |
| goto err_free_irq; |
| } |
| |
| device_init_wakeup(&pdev->dev, 1); |
| platform_set_drvdata(pdev, kbd); |
| |
| return 0; |
| |
| err_free_irq: |
| free_irq(kbd->irq, kbd); |
| err_put_clk: |
| clk_put(kbd->clk); |
| err_iounmap: |
| iounmap(kbd->io_base); |
| err_release_mem_region: |
| release_mem_region(res->start, resource_size(res)); |
| err_free_mem: |
| input_free_device(input_dev); |
| kfree(kbd); |
| |
| return error; |
| } |
| |
| static int __devexit spear_kbd_remove(struct platform_device *pdev) |
| { |
| struct spear_kbd *kbd = platform_get_drvdata(pdev); |
| |
| free_irq(kbd->irq, kbd); |
| input_unregister_device(kbd->input); |
| clk_put(kbd->clk); |
| iounmap(kbd->io_base); |
| release_mem_region(kbd->res->start, resource_size(kbd->res)); |
| kfree(kbd); |
| |
| device_init_wakeup(&pdev->dev, 1); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int spear_kbd_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct spear_kbd *kbd = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = kbd->input; |
| |
| mutex_lock(&input_dev->mutex); |
| |
| if (input_dev->users) |
| clk_enable(kbd->clk); |
| |
| if (device_may_wakeup(&pdev->dev)) |
| enable_irq_wake(kbd->irq); |
| |
| mutex_unlock(&input_dev->mutex); |
| |
| return 0; |
| } |
| |
| static int spear_kbd_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct spear_kbd *kbd = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = kbd->input; |
| |
| mutex_lock(&input_dev->mutex); |
| |
| if (device_may_wakeup(&pdev->dev)) |
| disable_irq_wake(kbd->irq); |
| |
| if (input_dev->users) |
| clk_enable(kbd->clk); |
| |
| mutex_unlock(&input_dev->mutex); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops spear_kbd_pm_ops = { |
| .suspend = spear_kbd_suspend, |
| .resume = spear_kbd_resume, |
| }; |
| #endif |
| |
| static struct platform_driver spear_kbd_driver = { |
| .probe = spear_kbd_probe, |
| .remove = __devexit_p(spear_kbd_remove), |
| .driver = { |
| .name = "keyboard", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &spear_kbd_pm_ops, |
| #endif |
| }, |
| }; |
| |
| static int __init spear_kbd_init(void) |
| { |
| return platform_driver_register(&spear_kbd_driver); |
| } |
| module_init(spear_kbd_init); |
| |
| static void __exit spear_kbd_exit(void) |
| { |
| platform_driver_unregister(&spear_kbd_driver); |
| } |
| module_exit(spear_kbd_exit); |
| |
| MODULE_AUTHOR("Rajeev Kumar"); |
| MODULE_DESCRIPTION("SPEAr Keyboard Driver"); |
| MODULE_LICENSE("GPL"); |