| /* |
| * linux/drivers/input/serio/sa1111ps2.c |
| * |
| * Copyright (C) 2002 Russell King |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| #include <asm/hardware/sa1111.h> |
| |
| struct ps2if { |
| struct serio *io; |
| struct sa1111_dev *dev; |
| void __iomem *base; |
| unsigned int open; |
| spinlock_t lock; |
| unsigned int head; |
| unsigned int tail; |
| unsigned char buf[4]; |
| }; |
| |
| /* |
| * Read all bytes waiting in the PS2 port. There should be |
| * at the most one, but we loop for safety. If there was a |
| * framing error, we have to manually clear the status. |
| */ |
| static irqreturn_t ps2_rxint(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct ps2if *ps2if = dev_id; |
| unsigned int scancode, flag, status; |
| |
| status = sa1111_readl(ps2if->base + SA1111_PS2STAT); |
| while (status & PS2STAT_RXF) { |
| if (status & PS2STAT_STP) |
| sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT); |
| |
| flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) | |
| (status & PS2STAT_RXP ? 0 : SERIO_PARITY); |
| |
| scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff; |
| |
| if (hweight8(scancode) & 1) |
| flag ^= SERIO_PARITY; |
| |
| serio_interrupt(ps2if->io, scancode, flag, regs); |
| |
| status = sa1111_readl(ps2if->base + SA1111_PS2STAT); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Completion of ps2 write |
| */ |
| static irqreturn_t ps2_txint(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct ps2if *ps2if = dev_id; |
| unsigned int status; |
| |
| spin_lock(&ps2if->lock); |
| status = sa1111_readl(ps2if->base + SA1111_PS2STAT); |
| if (ps2if->head == ps2if->tail) { |
| disable_irq(irq); |
| /* done */ |
| } else if (status & PS2STAT_TXE) { |
| sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); |
| ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1); |
| } |
| spin_unlock(&ps2if->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Write a byte to the PS2 port. We have to wait for the |
| * port to indicate that the transmitter is empty. |
| */ |
| static int ps2_write(struct serio *io, unsigned char val) |
| { |
| struct ps2if *ps2if = io->port_data; |
| unsigned long flags; |
| unsigned int head; |
| |
| spin_lock_irqsave(&ps2if->lock, flags); |
| |
| /* |
| * If the TX register is empty, we can go straight out. |
| */ |
| if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) { |
| sa1111_writel(val, ps2if->base + SA1111_PS2DATA); |
| } else { |
| if (ps2if->head == ps2if->tail) |
| enable_irq(ps2if->dev->irq[1]); |
| head = (ps2if->head + 1) & (sizeof(ps2if->buf) - 1); |
| if (head != ps2if->tail) { |
| ps2if->buf[ps2if->head] = val; |
| ps2if->head = head; |
| } |
| } |
| |
| spin_unlock_irqrestore(&ps2if->lock, flags); |
| return 0; |
| } |
| |
| static int ps2_open(struct serio *io) |
| { |
| struct ps2if *ps2if = io->port_data; |
| int ret; |
| |
| sa1111_enable_device(ps2if->dev); |
| |
| ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0, |
| SA1111_DRIVER_NAME(ps2if->dev), ps2if); |
| if (ret) { |
| printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", |
| ps2if->dev->irq[0], ret); |
| return ret; |
| } |
| |
| ret = request_irq(ps2if->dev->irq[1], ps2_txint, 0, |
| SA1111_DRIVER_NAME(ps2if->dev), ps2if); |
| if (ret) { |
| printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", |
| ps2if->dev->irq[1], ret); |
| free_irq(ps2if->dev->irq[0], ps2if); |
| return ret; |
| } |
| |
| ps2if->open = 1; |
| |
| enable_irq_wake(ps2if->dev->irq[0]); |
| |
| sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR); |
| return 0; |
| } |
| |
| static void ps2_close(struct serio *io) |
| { |
| struct ps2if *ps2if = io->port_data; |
| |
| sa1111_writel(0, ps2if->base + SA1111_PS2CR); |
| |
| disable_irq_wake(ps2if->dev->irq[0]); |
| |
| ps2if->open = 0; |
| |
| free_irq(ps2if->dev->irq[1], ps2if); |
| free_irq(ps2if->dev->irq[0], ps2if); |
| |
| sa1111_disable_device(ps2if->dev); |
| } |
| |
| /* |
| * Clear the input buffer. |
| */ |
| static void __init ps2_clear_input(struct ps2if *ps2if) |
| { |
| int maxread = 100; |
| |
| while (maxread--) { |
| if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff) |
| break; |
| } |
| } |
| |
| static inline unsigned int |
| ps2_test_one(struct ps2if *ps2if, unsigned int mask) |
| { |
| unsigned int val; |
| |
| sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR); |
| |
| udelay(2); |
| |
| val = sa1111_readl(ps2if->base + SA1111_PS2STAT); |
| return val & (PS2STAT_KBC | PS2STAT_KBD); |
| } |
| |
| /* |
| * Test the keyboard interface. We basically check to make sure that |
| * we can drive each line to the keyboard independently of each other. |
| */ |
| static int __init ps2_test(struct ps2if *ps2if) |
| { |
| unsigned int stat; |
| int ret = 0; |
| |
| stat = ps2_test_one(ps2if, PS2CR_FKC); |
| if (stat != PS2STAT_KBD) { |
| printk("PS/2 interface test failed[1]: %02x\n", stat); |
| ret = -ENODEV; |
| } |
| |
| stat = ps2_test_one(ps2if, 0); |
| if (stat != (PS2STAT_KBC | PS2STAT_KBD)) { |
| printk("PS/2 interface test failed[2]: %02x\n", stat); |
| ret = -ENODEV; |
| } |
| |
| stat = ps2_test_one(ps2if, PS2CR_FKD); |
| if (stat != PS2STAT_KBC) { |
| printk("PS/2 interface test failed[3]: %02x\n", stat); |
| ret = -ENODEV; |
| } |
| |
| sa1111_writel(0, ps2if->base + SA1111_PS2CR); |
| |
| return ret; |
| } |
| |
| /* |
| * Add one device to this driver. |
| */ |
| static int ps2_probe(struct sa1111_dev *dev) |
| { |
| struct ps2if *ps2if; |
| struct serio *serio; |
| int ret; |
| |
| ps2if = kmalloc(sizeof(struct ps2if), GFP_KERNEL); |
| serio = kmalloc(sizeof(struct serio), GFP_KERNEL); |
| if (!ps2if || !serio) { |
| ret = -ENOMEM; |
| goto free; |
| } |
| |
| memset(ps2if, 0, sizeof(struct ps2if)); |
| memset(serio, 0, sizeof(struct serio)); |
| |
| serio->id.type = SERIO_8042; |
| serio->write = ps2_write; |
| serio->open = ps2_open; |
| serio->close = ps2_close; |
| strlcpy(serio->name, dev->dev.bus_id, sizeof(serio->name)); |
| strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys)); |
| serio->port_data = ps2if; |
| serio->dev.parent = &dev->dev; |
| ps2if->io = serio; |
| ps2if->dev = dev; |
| sa1111_set_drvdata(dev, ps2if); |
| |
| spin_lock_init(&ps2if->lock); |
| |
| /* |
| * Request the physical region for this PS2 port. |
| */ |
| if (!request_mem_region(dev->res.start, |
| dev->res.end - dev->res.start + 1, |
| SA1111_DRIVER_NAME(dev))) { |
| ret = -EBUSY; |
| goto free; |
| } |
| |
| /* |
| * Our parent device has already mapped the region. |
| */ |
| ps2if->base = dev->mapbase; |
| |
| sa1111_enable_device(ps2if->dev); |
| |
| /* Incoming clock is 8MHz */ |
| sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV); |
| sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT); |
| |
| /* |
| * Flush any pending input. |
| */ |
| ps2_clear_input(ps2if); |
| |
| /* |
| * Test the keyboard interface. |
| */ |
| ret = ps2_test(ps2if); |
| if (ret) |
| goto out; |
| |
| /* |
| * Flush any pending input. |
| */ |
| ps2_clear_input(ps2if); |
| |
| sa1111_disable_device(ps2if->dev); |
| serio_register_port(ps2if->io); |
| return 0; |
| |
| out: |
| sa1111_disable_device(ps2if->dev); |
| release_mem_region(dev->res.start, |
| dev->res.end - dev->res.start + 1); |
| free: |
| sa1111_set_drvdata(dev, NULL); |
| kfree(ps2if); |
| kfree(serio); |
| return ret; |
| } |
| |
| /* |
| * Remove one device from this driver. |
| */ |
| static int ps2_remove(struct sa1111_dev *dev) |
| { |
| struct ps2if *ps2if = sa1111_get_drvdata(dev); |
| |
| serio_unregister_port(ps2if->io); |
| release_mem_region(dev->res.start, |
| dev->res.end - dev->res.start + 1); |
| sa1111_set_drvdata(dev, NULL); |
| |
| kfree(ps2if); |
| |
| return 0; |
| } |
| |
| /* |
| * Our device driver structure |
| */ |
| static struct sa1111_driver ps2_driver = { |
| .drv = { |
| .name = "sa1111-ps2", |
| }, |
| .devid = SA1111_DEVID_PS2, |
| .probe = ps2_probe, |
| .remove = ps2_remove, |
| }; |
| |
| static int __init ps2_init(void) |
| { |
| return sa1111_driver_register(&ps2_driver); |
| } |
| |
| static void __exit ps2_exit(void) |
| { |
| sa1111_driver_unregister(&ps2_driver); |
| } |
| |
| module_init(ps2_init); |
| module_exit(ps2_exit); |
| |
| MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); |
| MODULE_DESCRIPTION("SA1111 PS2 controller driver"); |
| MODULE_LICENSE("GPL"); |