| /* |
| * sec-core.c |
| * |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/mutex.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/samsung/core.h> |
| #include <linux/mfd/samsung/irq.h> |
| #include <linux/mfd/samsung/rtc.h> |
| #include <linux/mfd/samsung/s2mpa01.h> |
| #include <linux/mfd/samsung/s2mps11.h> |
| #include <linux/mfd/samsung/s2mps14.h> |
| #include <linux/mfd/samsung/s5m8763.h> |
| #include <linux/mfd/samsung/s5m8767.h> |
| #include <linux/regmap.h> |
| |
| static const struct mfd_cell s5m8751_devs[] = { |
| { |
| .name = "s5m8751-pmic", |
| }, { |
| .name = "s5m-charger", |
| }, { |
| .name = "s5m8751-codec", |
| }, |
| }; |
| |
| static const struct mfd_cell s5m8763_devs[] = { |
| { |
| .name = "s5m8763-pmic", |
| }, { |
| .name = "s5m-rtc", |
| }, { |
| .name = "s5m-charger", |
| }, |
| }; |
| |
| static const struct mfd_cell s5m8767_devs[] = { |
| { |
| .name = "s5m8767-pmic", |
| }, { |
| .name = "s5m-rtc", |
| }, { |
| .name = "s5m8767-clk", |
| .of_compatible = "samsung,s5m8767-clk", |
| } |
| }; |
| |
| static const struct mfd_cell s2mps11_devs[] = { |
| { |
| .name = "s2mps11-pmic", |
| }, { |
| .name = "s2mps11-clk", |
| .of_compatible = "samsung,s2mps11-clk", |
| } |
| }; |
| |
| static const struct mfd_cell s2mps14_devs[] = { |
| { |
| .name = "s2mps14-pmic", |
| }, { |
| .name = "s2mps14-rtc", |
| }, { |
| .name = "s2mps14-clk", |
| .of_compatible = "samsung,s2mps14-clk", |
| } |
| }; |
| |
| static const struct mfd_cell s2mpa01_devs[] = { |
| { |
| .name = "s2mpa01-pmic", |
| }, |
| }; |
| |
| #ifdef CONFIG_OF |
| static struct of_device_id sec_dt_match[] = { |
| { .compatible = "samsung,s5m8767-pmic", |
| .data = (void *)S5M8767X, |
| }, { |
| .compatible = "samsung,s2mps11-pmic", |
| .data = (void *)S2MPS11X, |
| }, { |
| .compatible = "samsung,s2mps14-pmic", |
| .data = (void *)S2MPS14X, |
| }, { |
| .compatible = "samsung,s2mpa01-pmic", |
| .data = (void *)S2MPA01, |
| }, { |
| /* Sentinel */ |
| }, |
| }; |
| #endif |
| |
| static bool s2mpa01_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case S2MPA01_REG_INT1M: |
| case S2MPA01_REG_INT2M: |
| case S2MPA01_REG_INT3M: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static bool s2mps11_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case S2MPS11_REG_INT1M: |
| case S2MPS11_REG_INT2M: |
| case S2MPS11_REG_INT3M: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static bool s5m8763_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case S5M8763_REG_IRQM1: |
| case S5M8763_REG_IRQM2: |
| case S5M8763_REG_IRQM3: |
| case S5M8763_REG_IRQM4: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static const struct regmap_config sec_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| static const struct regmap_config s2mpa01_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S2MPA01_REG_LDO_OVCB4, |
| .volatile_reg = s2mpa01_volatile, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config s2mps11_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S2MPS11_REG_L38CTRL, |
| .volatile_reg = s2mps11_volatile, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config s2mps14_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S2MPS14_REG_LDODSCH3, |
| .volatile_reg = s2mps11_volatile, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config s5m8763_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S5M8763_REG_LBCNFG2, |
| .volatile_reg = s5m8763_volatile, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config s5m8767_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S5M8767_REG_LDO28CTRL, |
| .volatile_reg = s2mps11_volatile, |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const struct regmap_config s5m_rtc_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = SEC_RTC_REG_MAX, |
| }; |
| |
| static const struct regmap_config s2mps14_rtc_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S2MPS_RTC_REG_MAX, |
| }; |
| |
| #ifdef CONFIG_OF |
| /* |
| * Only the common platform data elements for s5m8767 are parsed here from the |
| * device tree. Other sub-modules of s5m8767 such as pmic, rtc , charger and |
| * others have to parse their own platform data elements from device tree. |
| * |
| * The s5m8767 platform data structure is instantiated here and the drivers for |
| * the sub-modules need not instantiate another instance while parsing their |
| * platform data. |
| */ |
| static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( |
| struct device *dev) |
| { |
| struct sec_platform_data *pd; |
| |
| pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); |
| if (!pd) { |
| dev_err(dev, "could not allocate memory for pdata\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| /* |
| * ToDo: the 'wakeup' member in the platform data is more of a linux |
| * specfic information. Hence, there is no binding for that yet and |
| * not parsed here. |
| */ |
| |
| return pd; |
| } |
| #else |
| static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( |
| struct device *dev) |
| { |
| return NULL; |
| } |
| #endif |
| |
| static inline unsigned long sec_i2c_get_driver_data(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| #ifdef CONFIG_OF |
| if (i2c->dev.of_node) { |
| const struct of_device_id *match; |
| match = of_match_node(sec_dt_match, i2c->dev.of_node); |
| return (unsigned long)match->data; |
| } |
| #endif |
| return id->driver_data; |
| } |
| |
| static int sec_pmic_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev); |
| const struct regmap_config *regmap, *regmap_rtc; |
| struct sec_pmic_dev *sec_pmic; |
| int ret; |
| |
| sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev), |
| GFP_KERNEL); |
| if (sec_pmic == NULL) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, sec_pmic); |
| sec_pmic->dev = &i2c->dev; |
| sec_pmic->i2c = i2c; |
| sec_pmic->irq = i2c->irq; |
| sec_pmic->type = sec_i2c_get_driver_data(i2c, id); |
| |
| if (sec_pmic->dev->of_node) { |
| pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev); |
| if (IS_ERR(pdata)) { |
| ret = PTR_ERR(pdata); |
| return ret; |
| } |
| pdata->device_type = sec_pmic->type; |
| } |
| if (pdata) { |
| sec_pmic->device_type = pdata->device_type; |
| sec_pmic->ono = pdata->ono; |
| sec_pmic->irq_base = pdata->irq_base; |
| sec_pmic->wakeup = pdata->wakeup; |
| sec_pmic->pdata = pdata; |
| } |
| |
| switch (sec_pmic->device_type) { |
| case S2MPA01: |
| regmap = &s2mpa01_regmap_config; |
| /* |
| * The rtc-s5m driver does not support S2MPA01 and there |
| * is no mfd_cell for S2MPA01 RTC device. |
| * However we must pass something to devm_regmap_init_i2c() |
| * so use S5M-like regmap config even though it wouldn't work. |
| */ |
| regmap_rtc = &s5m_rtc_regmap_config; |
| break; |
| case S2MPS11X: |
| regmap = &s2mps11_regmap_config; |
| /* |
| * The rtc-s5m driver does not support S2MPS11 and there |
| * is no mfd_cell for S2MPS11 RTC device. |
| * However we must pass something to devm_regmap_init_i2c() |
| * so use S5M-like regmap config even though it wouldn't work. |
| */ |
| regmap_rtc = &s5m_rtc_regmap_config; |
| break; |
| case S2MPS14X: |
| regmap = &s2mps14_regmap_config; |
| regmap_rtc = &s2mps14_rtc_regmap_config; |
| break; |
| case S5M8763X: |
| regmap = &s5m8763_regmap_config; |
| regmap_rtc = &s5m_rtc_regmap_config; |
| break; |
| case S5M8767X: |
| regmap = &s5m8767_regmap_config; |
| regmap_rtc = &s5m_rtc_regmap_config; |
| break; |
| default: |
| regmap = &sec_regmap_config; |
| regmap_rtc = &s5m_rtc_regmap_config; |
| break; |
| } |
| |
| sec_pmic->regmap_pmic = devm_regmap_init_i2c(i2c, regmap); |
| if (IS_ERR(sec_pmic->regmap_pmic)) { |
| ret = PTR_ERR(sec_pmic->regmap_pmic); |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR); |
| if (!sec_pmic->rtc) { |
| dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n"); |
| return -ENODEV; |
| } |
| i2c_set_clientdata(sec_pmic->rtc, sec_pmic); |
| |
| sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc); |
| if (IS_ERR(sec_pmic->regmap_rtc)) { |
| ret = PTR_ERR(sec_pmic->regmap_rtc); |
| dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n", |
| ret); |
| goto err_regmap_rtc; |
| } |
| |
| if (pdata && pdata->cfg_pmic_irq) |
| pdata->cfg_pmic_irq(); |
| |
| sec_irq_init(sec_pmic); |
| |
| pm_runtime_set_active(sec_pmic->dev); |
| |
| switch (sec_pmic->device_type) { |
| case S5M8751X: |
| ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs, |
| ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL); |
| break; |
| case S5M8763X: |
| ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs, |
| ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL); |
| break; |
| case S5M8767X: |
| ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs, |
| ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL); |
| break; |
| case S2MPA01: |
| ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs, |
| ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL); |
| break; |
| case S2MPS11X: |
| ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs, |
| ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL); |
| break; |
| case S2MPS14X: |
| ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs, |
| ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL); |
| break; |
| default: |
| /* If this happens the probe function is problem */ |
| BUG(); |
| } |
| |
| if (ret) |
| goto err_mfd; |
| |
| device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup); |
| |
| return ret; |
| |
| err_mfd: |
| sec_irq_exit(sec_pmic); |
| err_regmap_rtc: |
| i2c_unregister_device(sec_pmic->rtc); |
| return ret; |
| } |
| |
| static int sec_pmic_remove(struct i2c_client *i2c) |
| { |
| struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); |
| |
| mfd_remove_devices(sec_pmic->dev); |
| sec_irq_exit(sec_pmic); |
| i2c_unregister_device(sec_pmic->rtc); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int sec_pmic_suspend(struct device *dev) |
| { |
| struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); |
| struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); |
| |
| if (device_may_wakeup(dev)) { |
| enable_irq_wake(sec_pmic->irq); |
| /* |
| * PMIC IRQ must be disabled during suspend for RTC alarm |
| * to work properly. |
| * When device is woken up from suspend by RTC Alarm, an |
| * interrupt occurs before resuming I2C bus controller. |
| * The interrupt is handled by regmap_irq_thread which tries |
| * to read RTC registers. This read fails (I2C is still |
| * suspended) and RTC Alarm interrupt is disabled. |
| */ |
| disable_irq(sec_pmic->irq); |
| } |
| |
| return 0; |
| } |
| |
| static int sec_pmic_resume(struct device *dev) |
| { |
| struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); |
| struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c); |
| |
| if (device_may_wakeup(dev)) { |
| disable_irq_wake(sec_pmic->irq); |
| enable_irq(sec_pmic->irq); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(sec_pmic_pm_ops, sec_pmic_suspend, sec_pmic_resume); |
| |
| static const struct i2c_device_id sec_pmic_id[] = { |
| { "sec_pmic", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, sec_pmic_id); |
| |
| static struct i2c_driver sec_pmic_driver = { |
| .driver = { |
| .name = "sec_pmic", |
| .owner = THIS_MODULE, |
| .pm = &sec_pmic_pm_ops, |
| .of_match_table = of_match_ptr(sec_dt_match), |
| }, |
| .probe = sec_pmic_probe, |
| .remove = sec_pmic_remove, |
| .id_table = sec_pmic_id, |
| }; |
| |
| static int __init sec_pmic_init(void) |
| { |
| return i2c_add_driver(&sec_pmic_driver); |
| } |
| |
| subsys_initcall(sec_pmic_init); |
| |
| static void __exit sec_pmic_exit(void) |
| { |
| i2c_del_driver(&sec_pmic_driver); |
| } |
| module_exit(sec_pmic_exit); |
| |
| MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); |
| MODULE_DESCRIPTION("Core support for the S5M MFD"); |
| MODULE_LICENSE("GPL"); |