| /* |
| * MPC85xx setup and early boot code plus other random bits. |
| * |
| * Maintained by Kumar Gala (see MAINTAINERS for contact information) |
| * |
| * Copyright 2005 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| |
| #include <asm/system.h> |
| #include <asm/time.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/mpc85xx.h> |
| #include <asm/prom.h> |
| #include <asm/mpic.h> |
| #include <mm/mmu_decl.h> |
| #include <asm/udbg.h> |
| |
| #include <sysdev/fsl_soc.h> |
| #include "mpc85xx.h" |
| |
| #ifndef CONFIG_PCI |
| unsigned long isa_io_base = 0; |
| unsigned long isa_mem_base = 0; |
| #endif |
| |
| #ifdef CONFIG_PCI |
| int |
| mpc85xx_exclude_device(u_char bus, u_char devfn) |
| { |
| if (bus == 0 && PCI_SLOT(devfn) == 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| else |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| void __init |
| mpc85xx_pcibios_fixup(void) |
| { |
| struct pci_dev *dev = NULL; |
| |
| for_each_pci_dev(dev) |
| pci_read_irq_line(dev); |
| } |
| #endif /* CONFIG_PCI */ |
| |
| |
| void __init mpc85xx_ads_pic_init(void) |
| { |
| struct mpic *mpic; |
| struct resource r; |
| struct device_node *np = NULL; |
| |
| np = of_find_node_by_type(np, "open-pic"); |
| |
| if (np == NULL) { |
| printk(KERN_ERR "Could not find open-pic node\n"); |
| return; |
| } |
| |
| if(of_address_to_resource(np, 0, &r)) { |
| printk(KERN_ERR "Could not map mpic register space\n"); |
| of_node_put(np); |
| return; |
| } |
| |
| mpic = mpic_alloc(np, r.start, |
| MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, |
| 4, 0, " OpenPIC "); |
| BUG_ON(mpic == NULL); |
| of_node_put(np); |
| |
| mpic_assign_isu(mpic, 0, r.start + 0x10200); |
| mpic_assign_isu(mpic, 1, r.start + 0x10280); |
| mpic_assign_isu(mpic, 2, r.start + 0x10300); |
| mpic_assign_isu(mpic, 3, r.start + 0x10380); |
| mpic_assign_isu(mpic, 4, r.start + 0x10400); |
| mpic_assign_isu(mpic, 5, r.start + 0x10480); |
| mpic_assign_isu(mpic, 6, r.start + 0x10500); |
| mpic_assign_isu(mpic, 7, r.start + 0x10580); |
| |
| /* Unused on this platform (leave room for 8548) */ |
| mpic_assign_isu(mpic, 8, r.start + 0x10600); |
| mpic_assign_isu(mpic, 9, r.start + 0x10680); |
| mpic_assign_isu(mpic, 10, r.start + 0x10700); |
| mpic_assign_isu(mpic, 11, r.start + 0x10780); |
| |
| /* External Interrupts */ |
| mpic_assign_isu(mpic, 12, r.start + 0x10000); |
| mpic_assign_isu(mpic, 13, r.start + 0x10080); |
| mpic_assign_isu(mpic, 14, r.start + 0x10100); |
| |
| mpic_init(mpic); |
| } |
| |
| /* |
| * Setup the architecture |
| */ |
| static void __init mpc85xx_ads_setup_arch(void) |
| { |
| struct device_node *cpu; |
| #ifdef CONFIG_PCI |
| struct device_node *np; |
| #endif |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc85xx_ads_setup_arch()", 0); |
| |
| cpu = of_find_node_by_type(NULL, "cpu"); |
| if (cpu != 0) { |
| unsigned int *fp; |
| |
| fp = (int *)get_property(cpu, "clock-frequency", NULL); |
| if (fp != 0) |
| loops_per_jiffy = *fp / HZ; |
| else |
| loops_per_jiffy = 50000000 / HZ; |
| of_node_put(cpu); |
| } |
| |
| #ifdef CONFIG_PCI |
| for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) |
| add_bridge(np); |
| |
| ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup; |
| ppc_md.pci_exclude_device = mpc85xx_exclude_device; |
| #endif |
| |
| #ifdef CONFIG_ROOT_NFS |
| ROOT_DEV = Root_NFS; |
| #else |
| ROOT_DEV = Root_HDA1; |
| #endif |
| } |
| |
| void mpc85xx_ads_show_cpuinfo(struct seq_file *m) |
| { |
| uint pvid, svid, phid1; |
| uint memsize = total_memory; |
| |
| pvid = mfspr(SPRN_PVR); |
| svid = mfspr(SPRN_SVR); |
| |
| seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); |
| seq_printf(m, "Machine\t\t: mpc85xx\n"); |
| seq_printf(m, "PVR\t\t: 0x%x\n", pvid); |
| seq_printf(m, "SVR\t\t: 0x%x\n", svid); |
| |
| /* Display cpu Pll setting */ |
| phid1 = mfspr(SPRN_HID1); |
| seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); |
| |
| /* Display the amount of memory */ |
| seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); |
| } |
| |
| /* |
| * Called very early, device-tree isn't unflattened |
| */ |
| static int __init mpc85xx_ads_probe(void) |
| { |
| /* We always match for now, eventually we should look at the flat |
| dev tree to ensure this is the board we are suppose to run on |
| */ |
| return 1; |
| } |
| |
| define_machine(mpc85xx_ads) { |
| .name = "MPC85xx ADS", |
| .probe = mpc85xx_ads_probe, |
| .setup_arch = mpc85xx_ads_setup_arch, |
| .init_IRQ = mpc85xx_ads_pic_init, |
| .show_cpuinfo = mpc85xx_ads_show_cpuinfo, |
| .get_irq = mpic_get_irq, |
| .restart = mpc85xx_restart, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |