| /* |
| * wm2000.c -- WM2000 ALSA Soc Audio driver |
| * |
| * Copyright 2008-2011 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * The download image for the WM2000 will be requested as |
| * 'wm2000_anc.bin' by default (overridable via platform data) at |
| * runtime and is expected to be in flat binary format. This is |
| * generated by Wolfson configuration tools and includes |
| * system-specific callibration information. If supplied as a |
| * sequence of ASCII-encoded hexidecimal bytes this can be converted |
| * into a flat binary with a command such as this on the command line: |
| * |
| * perl -e 'while (<>) { s/[\r\n]+// ; printf("%c", hex($_)); }' |
| * < file > wm2000_anc.bin |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/firmware.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/debugfs.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include <sound/wm2000.h> |
| |
| #include "wm2000.h" |
| |
| #define WM2000_NUM_SUPPLIES 3 |
| |
| static const char *wm2000_supplies[WM2000_NUM_SUPPLIES] = { |
| "SPKVDD", |
| "DBVDD", |
| "DCVDD", |
| }; |
| |
| enum wm2000_anc_mode { |
| ANC_ACTIVE = 0, |
| ANC_BYPASS = 1, |
| ANC_STANDBY = 2, |
| ANC_OFF = 3, |
| }; |
| |
| struct wm2000_priv { |
| struct i2c_client *i2c; |
| struct regmap *regmap; |
| struct clk *mclk; |
| |
| struct regulator_bulk_data supplies[WM2000_NUM_SUPPLIES]; |
| |
| enum wm2000_anc_mode anc_mode; |
| |
| unsigned int anc_active:1; |
| unsigned int anc_eng_ena:1; |
| unsigned int spk_ena:1; |
| |
| unsigned int speech_clarity:1; |
| |
| int anc_download_size; |
| char *anc_download; |
| |
| struct mutex lock; |
| }; |
| |
| static int wm2000_write(struct i2c_client *i2c, unsigned int reg, |
| unsigned int value) |
| { |
| struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c); |
| return regmap_write(wm2000->regmap, reg, value); |
| } |
| |
| static unsigned int wm2000_read(struct i2c_client *i2c, unsigned int r) |
| { |
| struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c); |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(wm2000->regmap, r, &val); |
| if (ret < 0) |
| return -1; |
| |
| return val; |
| } |
| |
| static void wm2000_reset(struct wm2000_priv *wm2000) |
| { |
| struct i2c_client *i2c = wm2000->i2c; |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR); |
| wm2000_write(i2c, WM2000_REG_ID1, 0); |
| |
| wm2000->anc_mode = ANC_OFF; |
| } |
| |
| static int wm2000_poll_bit(struct i2c_client *i2c, |
| unsigned int reg, u8 mask) |
| { |
| int timeout = 4000; |
| int val; |
| |
| val = wm2000_read(i2c, reg); |
| |
| while (!(val & mask) && --timeout) { |
| msleep(1); |
| val = wm2000_read(i2c, reg); |
| } |
| |
| if (timeout == 0) |
| return 0; |
| else |
| return 1; |
| } |
| |
| static int wm2000_power_up(struct i2c_client *i2c, int analogue) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); |
| unsigned long rate; |
| int ret; |
| |
| if (WARN_ON(wm2000->anc_mode != ANC_OFF)) |
| return -EINVAL; |
| |
| dev_dbg(&i2c->dev, "Beginning power up\n"); |
| |
| ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| rate = clk_get_rate(wm2000->mclk); |
| if (rate <= 13500000) { |
| dev_dbg(&i2c->dev, "Disabling MCLK divider\n"); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, |
| WM2000_MCLK_DIV2_ENA_CLR); |
| } else { |
| dev_dbg(&i2c->dev, "Enabling MCLK divider\n"); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, |
| WM2000_MCLK_DIV2_ENA_SET); |
| } |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_CLR); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_ENG_SET); |
| |
| /* Wait for ANC engine to become ready */ |
| if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, |
| WM2000_ANC_ENG_IDLE)) { |
| dev_err(&i2c->dev, "ANC engine failed to reset\n"); |
| regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| return -ETIMEDOUT; |
| } |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, |
| WM2000_STATUS_BOOT_COMPLETE)) { |
| dev_err(&i2c->dev, "ANC engine failed to initialise\n"); |
| regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| return -ETIMEDOUT; |
| } |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET); |
| |
| /* Open code download of the data since it is the only bulk |
| * write we do. */ |
| dev_dbg(&i2c->dev, "Downloading %d bytes\n", |
| wm2000->anc_download_size - 2); |
| |
| ret = i2c_master_send(i2c, wm2000->anc_download, |
| wm2000->anc_download_size); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "i2c_transfer() failed: %d\n", ret); |
| regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| return ret; |
| } |
| if (ret != wm2000->anc_download_size) { |
| dev_err(&i2c->dev, "i2c_transfer() failed, %d != %d\n", |
| ret, wm2000->anc_download_size); |
| regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| return -EIO; |
| } |
| |
| dev_dbg(&i2c->dev, "Download complete\n"); |
| |
| if (analogue) { |
| wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4); |
| |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_ANA_SEQ_INCLUDE | |
| WM2000_MODE_MOUSE_ENABLE | |
| WM2000_MODE_THERMAL_ENABLE); |
| } else { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_MOUSE_ENABLE | |
| WM2000_MODE_THERMAL_ENABLE); |
| } |
| |
| ret = wm2000_read(i2c, WM2000_REG_SPEECH_CLARITY); |
| if (wm2000->speech_clarity) |
| ret |= WM2000_SPEECH_CLARITY; |
| else |
| ret &= ~WM2000_SPEECH_CLARITY; |
| wm2000_write(i2c, WM2000_REG_SPEECH_CLARITY, ret); |
| |
| wm2000_write(i2c, WM2000_REG_SYS_START0, 0x33); |
| wm2000_write(i2c, WM2000_REG_SYS_START1, 0x02); |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR); |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, |
| WM2000_STATUS_MOUSE_ACTIVE)) { |
| dev_err(&i2c->dev, "Timed out waiting for device\n"); |
| regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| return -ETIMEDOUT; |
| } |
| |
| dev_dbg(&i2c->dev, "ANC active\n"); |
| if (analogue) |
| dev_dbg(&i2c->dev, "Analogue active\n"); |
| wm2000->anc_mode = ANC_ACTIVE; |
| |
| return 0; |
| } |
| |
| static int wm2000_power_down(struct i2c_client *i2c, int analogue) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); |
| |
| if (analogue) { |
| wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4); |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_ANA_SEQ_INCLUDE | |
| WM2000_MODE_POWER_DOWN); |
| } else { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_POWER_DOWN); |
| } |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, |
| WM2000_STATUS_POWER_DOWN_COMPLETE)) { |
| dev_err(&i2c->dev, "Timeout waiting for ANC power down\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, |
| WM2000_ANC_ENG_IDLE)) { |
| dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n"); |
| return -ETIMEDOUT; |
| } |
| |
| regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| |
| dev_dbg(&i2c->dev, "powered off\n"); |
| wm2000->anc_mode = ANC_OFF; |
| |
| return 0; |
| } |
| |
| static int wm2000_enter_bypass(struct i2c_client *i2c, int analogue) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); |
| |
| if (WARN_ON(wm2000->anc_mode != ANC_ACTIVE)) |
| return -EINVAL; |
| |
| if (analogue) { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_ANA_SEQ_INCLUDE | |
| WM2000_MODE_THERMAL_ENABLE | |
| WM2000_MODE_BYPASS_ENTRY); |
| } else { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_THERMAL_ENABLE | |
| WM2000_MODE_BYPASS_ENTRY); |
| } |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, |
| WM2000_STATUS_ANC_DISABLED)) { |
| dev_err(&i2c->dev, "Timeout waiting for ANC disable\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, |
| WM2000_ANC_ENG_IDLE)) { |
| dev_err(&i2c->dev, "Timeout waiting for ANC engine idle\n"); |
| return -ETIMEDOUT; |
| } |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR); |
| |
| wm2000->anc_mode = ANC_BYPASS; |
| dev_dbg(&i2c->dev, "bypass enabled\n"); |
| |
| return 0; |
| } |
| |
| static int wm2000_exit_bypass(struct i2c_client *i2c, int analogue) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); |
| |
| if (WARN_ON(wm2000->anc_mode != ANC_BYPASS)) |
| return -EINVAL; |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0); |
| |
| if (analogue) { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_ANA_SEQ_INCLUDE | |
| WM2000_MODE_MOUSE_ENABLE | |
| WM2000_MODE_THERMAL_ENABLE); |
| } else { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_MOUSE_ENABLE | |
| WM2000_MODE_THERMAL_ENABLE); |
| } |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR); |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, |
| WM2000_STATUS_MOUSE_ACTIVE)) { |
| dev_err(&i2c->dev, "Timed out waiting for MOUSE\n"); |
| return -ETIMEDOUT; |
| } |
| |
| wm2000->anc_mode = ANC_ACTIVE; |
| dev_dbg(&i2c->dev, "MOUSE active\n"); |
| |
| return 0; |
| } |
| |
| static int wm2000_enter_standby(struct i2c_client *i2c, int analogue) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); |
| |
| if (WARN_ON(wm2000->anc_mode != ANC_ACTIVE)) |
| return -EINVAL; |
| |
| if (analogue) { |
| wm2000_write(i2c, WM2000_REG_ANA_VMID_PD_TIME, 248 / 4); |
| |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_ANA_SEQ_INCLUDE | |
| WM2000_MODE_THERMAL_ENABLE | |
| WM2000_MODE_STANDBY_ENTRY); |
| } else { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_THERMAL_ENABLE | |
| WM2000_MODE_STANDBY_ENTRY); |
| } |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, |
| WM2000_STATUS_ANC_DISABLED)) { |
| dev_err(&i2c->dev, |
| "Timed out waiting for ANC disable after 1ms\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_ANC_STAT, WM2000_ANC_ENG_IDLE)) { |
| dev_err(&i2c->dev, |
| "Timed out waiting for standby\n"); |
| return -ETIMEDOUT; |
| } |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL1, WM2000_SYS_STBY); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_CLR); |
| |
| wm2000->anc_mode = ANC_STANDBY; |
| dev_dbg(&i2c->dev, "standby\n"); |
| if (analogue) |
| dev_dbg(&i2c->dev, "Analogue disabled\n"); |
| |
| return 0; |
| } |
| |
| static int wm2000_exit_standby(struct i2c_client *i2c, int analogue) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(&i2c->dev); |
| |
| if (WARN_ON(wm2000->anc_mode != ANC_STANDBY)) |
| return -EINVAL; |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL1, 0); |
| |
| if (analogue) { |
| wm2000_write(i2c, WM2000_REG_ANA_VMID_PU_TIME, 248 / 4); |
| |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_ANA_SEQ_INCLUDE | |
| WM2000_MODE_THERMAL_ENABLE | |
| WM2000_MODE_MOUSE_ENABLE); |
| } else { |
| wm2000_write(i2c, WM2000_REG_SYS_MODE_CNTRL, |
| WM2000_MODE_THERMAL_ENABLE | |
| WM2000_MODE_MOUSE_ENABLE); |
| } |
| |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_RAM_SET); |
| wm2000_write(i2c, WM2000_REG_SYS_CTL2, WM2000_ANC_INT_N_CLR); |
| |
| if (!wm2000_poll_bit(i2c, WM2000_REG_SYS_STATUS, |
| WM2000_STATUS_MOUSE_ACTIVE)) { |
| dev_err(&i2c->dev, "Timed out waiting for MOUSE\n"); |
| return -ETIMEDOUT; |
| } |
| |
| wm2000->anc_mode = ANC_ACTIVE; |
| dev_dbg(&i2c->dev, "MOUSE active\n"); |
| if (analogue) |
| dev_dbg(&i2c->dev, "Analogue enabled\n"); |
| |
| return 0; |
| } |
| |
| typedef int (*wm2000_mode_fn)(struct i2c_client *i2c, int analogue); |
| |
| static struct { |
| enum wm2000_anc_mode source; |
| enum wm2000_anc_mode dest; |
| int analogue; |
| wm2000_mode_fn step[2]; |
| } anc_transitions[] = { |
| { |
| .source = ANC_OFF, |
| .dest = ANC_ACTIVE, |
| .analogue = 1, |
| .step = { |
| wm2000_power_up, |
| }, |
| }, |
| { |
| .source = ANC_OFF, |
| .dest = ANC_STANDBY, |
| .step = { |
| wm2000_power_up, |
| wm2000_enter_standby, |
| }, |
| }, |
| { |
| .source = ANC_OFF, |
| .dest = ANC_BYPASS, |
| .analogue = 1, |
| .step = { |
| wm2000_power_up, |
| wm2000_enter_bypass, |
| }, |
| }, |
| { |
| .source = ANC_ACTIVE, |
| .dest = ANC_BYPASS, |
| .analogue = 1, |
| .step = { |
| wm2000_enter_bypass, |
| }, |
| }, |
| { |
| .source = ANC_ACTIVE, |
| .dest = ANC_STANDBY, |
| .analogue = 1, |
| .step = { |
| wm2000_enter_standby, |
| }, |
| }, |
| { |
| .source = ANC_ACTIVE, |
| .dest = ANC_OFF, |
| .analogue = 1, |
| .step = { |
| wm2000_power_down, |
| }, |
| }, |
| { |
| .source = ANC_BYPASS, |
| .dest = ANC_ACTIVE, |
| .analogue = 1, |
| .step = { |
| wm2000_exit_bypass, |
| }, |
| }, |
| { |
| .source = ANC_BYPASS, |
| .dest = ANC_STANDBY, |
| .analogue = 1, |
| .step = { |
| wm2000_exit_bypass, |
| wm2000_enter_standby, |
| }, |
| }, |
| { |
| .source = ANC_BYPASS, |
| .dest = ANC_OFF, |
| .step = { |
| wm2000_exit_bypass, |
| wm2000_power_down, |
| }, |
| }, |
| { |
| .source = ANC_STANDBY, |
| .dest = ANC_ACTIVE, |
| .analogue = 1, |
| .step = { |
| wm2000_exit_standby, |
| }, |
| }, |
| { |
| .source = ANC_STANDBY, |
| .dest = ANC_BYPASS, |
| .analogue = 1, |
| .step = { |
| wm2000_exit_standby, |
| wm2000_enter_bypass, |
| }, |
| }, |
| { |
| .source = ANC_STANDBY, |
| .dest = ANC_OFF, |
| .step = { |
| wm2000_exit_standby, |
| wm2000_power_down, |
| }, |
| }, |
| }; |
| |
| static int wm2000_anc_transition(struct wm2000_priv *wm2000, |
| enum wm2000_anc_mode mode) |
| { |
| struct i2c_client *i2c = wm2000->i2c; |
| int i, j; |
| int ret; |
| |
| if (wm2000->anc_mode == mode) |
| return 0; |
| |
| for (i = 0; i < ARRAY_SIZE(anc_transitions); i++) |
| if (anc_transitions[i].source == wm2000->anc_mode && |
| anc_transitions[i].dest == mode) |
| break; |
| if (i == ARRAY_SIZE(anc_transitions)) { |
| dev_err(&i2c->dev, "No transition for %d->%d\n", |
| wm2000->anc_mode, mode); |
| return -EINVAL; |
| } |
| |
| /* Maintain clock while active */ |
| if (anc_transitions[i].source == ANC_OFF) { |
| ret = clk_prepare_enable(wm2000->mclk); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to enable MCLK: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| for (j = 0; j < ARRAY_SIZE(anc_transitions[j].step); j++) { |
| if (!anc_transitions[i].step[j]) |
| break; |
| ret = anc_transitions[i].step[j](i2c, |
| anc_transitions[i].analogue); |
| if (ret != 0) |
| return ret; |
| } |
| |
| if (anc_transitions[i].dest == ANC_OFF) |
| clk_disable_unprepare(wm2000->mclk); |
| |
| return ret; |
| } |
| |
| static int wm2000_anc_set_mode(struct wm2000_priv *wm2000) |
| { |
| struct i2c_client *i2c = wm2000->i2c; |
| enum wm2000_anc_mode mode; |
| |
| if (wm2000->anc_eng_ena && wm2000->spk_ena) |
| if (wm2000->anc_active) |
| mode = ANC_ACTIVE; |
| else |
| mode = ANC_BYPASS; |
| else |
| mode = ANC_STANDBY; |
| |
| dev_dbg(&i2c->dev, "Set mode %d (enabled %d, mute %d, active %d)\n", |
| mode, wm2000->anc_eng_ena, !wm2000->spk_ena, |
| wm2000->anc_active); |
| |
| return wm2000_anc_transition(wm2000, mode); |
| } |
| |
| static int wm2000_anc_mode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| |
| ucontrol->value.enumerated.item[0] = wm2000->anc_active; |
| |
| return 0; |
| } |
| |
| static int wm2000_anc_mode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| int anc_active = ucontrol->value.enumerated.item[0]; |
| int ret; |
| |
| if (anc_active > 1) |
| return -EINVAL; |
| |
| mutex_lock(&wm2000->lock); |
| |
| wm2000->anc_active = anc_active; |
| |
| ret = wm2000_anc_set_mode(wm2000); |
| |
| mutex_unlock(&wm2000->lock); |
| |
| return ret; |
| } |
| |
| static int wm2000_speaker_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| |
| ucontrol->value.enumerated.item[0] = wm2000->spk_ena; |
| |
| return 0; |
| } |
| |
| static int wm2000_speaker_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| int val = ucontrol->value.enumerated.item[0]; |
| int ret; |
| |
| if (val > 1) |
| return -EINVAL; |
| |
| mutex_lock(&wm2000->lock); |
| |
| wm2000->spk_ena = val; |
| |
| ret = wm2000_anc_set_mode(wm2000); |
| |
| mutex_unlock(&wm2000->lock); |
| |
| return ret; |
| } |
| |
| static const struct snd_kcontrol_new wm2000_controls[] = { |
| SOC_SINGLE("ANC Volume", WM2000_REG_ANC_GAIN_CTRL, 0, 255, 0), |
| SOC_SINGLE_BOOL_EXT("WM2000 ANC Switch", 0, |
| wm2000_anc_mode_get, |
| wm2000_anc_mode_put), |
| SOC_SINGLE_BOOL_EXT("WM2000 Switch", 0, |
| wm2000_speaker_get, |
| wm2000_speaker_put), |
| }; |
| |
| static int wm2000_anc_power_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_codec *codec = w->codec; |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| int ret; |
| |
| mutex_lock(&wm2000->lock); |
| |
| if (SND_SOC_DAPM_EVENT_ON(event)) |
| wm2000->anc_eng_ena = 1; |
| |
| if (SND_SOC_DAPM_EVENT_OFF(event)) |
| wm2000->anc_eng_ena = 0; |
| |
| ret = wm2000_anc_set_mode(wm2000); |
| |
| mutex_unlock(&wm2000->lock); |
| |
| return ret; |
| } |
| |
| static const struct snd_soc_dapm_widget wm2000_dapm_widgets[] = { |
| /* Externally visible pins */ |
| SND_SOC_DAPM_OUTPUT("SPKN"), |
| SND_SOC_DAPM_OUTPUT("SPKP"), |
| |
| SND_SOC_DAPM_INPUT("LINN"), |
| SND_SOC_DAPM_INPUT("LINP"), |
| |
| SND_SOC_DAPM_PGA_E("ANC Engine", SND_SOC_NOPM, 0, 0, NULL, 0, |
| wm2000_anc_power_event, |
| SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), |
| }; |
| |
| /* Target, Path, Source */ |
| static const struct snd_soc_dapm_route wm2000_audio_map[] = { |
| { "SPKN", NULL, "ANC Engine" }, |
| { "SPKP", NULL, "ANC Engine" }, |
| { "ANC Engine", NULL, "LINN" }, |
| { "ANC Engine", NULL, "LINP" }, |
| }; |
| |
| #ifdef CONFIG_PM |
| static int wm2000_suspend(struct snd_soc_codec *codec) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| |
| return wm2000_anc_transition(wm2000, ANC_OFF); |
| } |
| |
| static int wm2000_resume(struct snd_soc_codec *codec) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| |
| return wm2000_anc_set_mode(wm2000); |
| } |
| #else |
| #define wm2000_suspend NULL |
| #define wm2000_resume NULL |
| #endif |
| |
| static bool wm2000_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case WM2000_REG_SYS_START: |
| case WM2000_REG_ANC_GAIN_CTRL: |
| case WM2000_REG_MSE_TH1: |
| case WM2000_REG_MSE_TH2: |
| case WM2000_REG_SPEECH_CLARITY: |
| case WM2000_REG_SYS_WATCHDOG: |
| case WM2000_REG_ANA_VMID_PD_TIME: |
| case WM2000_REG_ANA_VMID_PU_TIME: |
| case WM2000_REG_CAT_FLTR_INDX: |
| case WM2000_REG_CAT_GAIN_0: |
| case WM2000_REG_SYS_STATUS: |
| case WM2000_REG_SYS_MODE_CNTRL: |
| case WM2000_REG_SYS_START0: |
| case WM2000_REG_SYS_START1: |
| case WM2000_REG_ID1: |
| case WM2000_REG_ID2: |
| case WM2000_REG_REVISON: |
| case WM2000_REG_SYS_CTL1: |
| case WM2000_REG_SYS_CTL2: |
| case WM2000_REG_ANC_STAT: |
| case WM2000_REG_IF_CTL: |
| case WM2000_REG_ANA_MIC_CTL: |
| case WM2000_REG_SPK_CTL: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config wm2000_regmap = { |
| .reg_bits = 16, |
| .val_bits = 8, |
| |
| .max_register = WM2000_REG_SPK_CTL, |
| .readable_reg = wm2000_readable_reg, |
| }; |
| |
| static int wm2000_probe(struct snd_soc_codec *codec) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| |
| /* This will trigger a transition to standby mode by default */ |
| wm2000_anc_set_mode(wm2000); |
| |
| return 0; |
| } |
| |
| static int wm2000_remove(struct snd_soc_codec *codec) |
| { |
| struct wm2000_priv *wm2000 = dev_get_drvdata(codec->dev); |
| |
| return wm2000_anc_transition(wm2000, ANC_OFF); |
| } |
| |
| static struct snd_soc_codec_driver soc_codec_dev_wm2000 = { |
| .probe = wm2000_probe, |
| .remove = wm2000_remove, |
| .suspend = wm2000_suspend, |
| .resume = wm2000_resume, |
| |
| .dapm_widgets = wm2000_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm2000_dapm_widgets), |
| .dapm_routes = wm2000_audio_map, |
| .num_dapm_routes = ARRAY_SIZE(wm2000_audio_map), |
| .controls = wm2000_controls, |
| .num_controls = ARRAY_SIZE(wm2000_controls), |
| }; |
| |
| static int wm2000_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *i2c_id) |
| { |
| struct wm2000_priv *wm2000; |
| struct wm2000_platform_data *pdata; |
| const char *filename; |
| const struct firmware *fw = NULL; |
| int ret, i; |
| int reg; |
| u16 id; |
| |
| wm2000 = devm_kzalloc(&i2c->dev, sizeof(struct wm2000_priv), |
| GFP_KERNEL); |
| if (wm2000 == NULL) { |
| dev_err(&i2c->dev, "Unable to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| mutex_init(&wm2000->lock); |
| |
| dev_set_drvdata(&i2c->dev, wm2000); |
| |
| wm2000->regmap = devm_regmap_init_i2c(i2c, &wm2000_regmap); |
| if (IS_ERR(wm2000->regmap)) { |
| ret = PTR_ERR(wm2000->regmap); |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| ret); |
| goto out; |
| } |
| |
| for (i = 0; i < WM2000_NUM_SUPPLIES; i++) |
| wm2000->supplies[i].supply = wm2000_supplies[i]; |
| |
| ret = devm_regulator_bulk_get(&i2c->dev, WM2000_NUM_SUPPLIES, |
| wm2000->supplies); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to get supplies: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| /* Verify that this is a WM2000 */ |
| reg = wm2000_read(i2c, WM2000_REG_ID1); |
| id = reg << 8; |
| reg = wm2000_read(i2c, WM2000_REG_ID2); |
| id |= reg & 0xff; |
| |
| if (id != 0x2000) { |
| dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id); |
| ret = -ENODEV; |
| goto err_supplies; |
| } |
| |
| reg = wm2000_read(i2c, WM2000_REG_REVISON); |
| dev_info(&i2c->dev, "revision %c\n", reg + 'A'); |
| |
| wm2000->mclk = devm_clk_get(&i2c->dev, "MCLK"); |
| if (IS_ERR(wm2000->mclk)) { |
| ret = PTR_ERR(wm2000->mclk); |
| dev_err(&i2c->dev, "Failed to get MCLK: %d\n", ret); |
| goto err_supplies; |
| } |
| |
| filename = "wm2000_anc.bin"; |
| pdata = dev_get_platdata(&i2c->dev); |
| if (pdata) { |
| wm2000->speech_clarity = !pdata->speech_enh_disable; |
| |
| if (pdata->download_file) |
| filename = pdata->download_file; |
| } |
| |
| ret = request_firmware(&fw, filename, &i2c->dev); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret); |
| goto err_supplies; |
| } |
| |
| /* Pre-cook the concatenation of the register address onto the image */ |
| wm2000->anc_download_size = fw->size + 2; |
| wm2000->anc_download = devm_kzalloc(&i2c->dev, |
| wm2000->anc_download_size, |
| GFP_KERNEL); |
| if (wm2000->anc_download == NULL) { |
| dev_err(&i2c->dev, "Out of memory\n"); |
| ret = -ENOMEM; |
| goto err_supplies; |
| } |
| |
| wm2000->anc_download[0] = 0x80; |
| wm2000->anc_download[1] = 0x00; |
| memcpy(wm2000->anc_download + 2, fw->data, fw->size); |
| |
| wm2000->anc_eng_ena = 1; |
| wm2000->anc_active = 1; |
| wm2000->spk_ena = 1; |
| wm2000->i2c = i2c; |
| |
| wm2000_reset(wm2000); |
| |
| ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); |
| |
| err_supplies: |
| regulator_bulk_disable(WM2000_NUM_SUPPLIES, wm2000->supplies); |
| |
| out: |
| release_firmware(fw); |
| return ret; |
| } |
| |
| static int wm2000_i2c_remove(struct i2c_client *i2c) |
| { |
| snd_soc_unregister_codec(&i2c->dev); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm2000_i2c_id[] = { |
| { "wm2000", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm2000_i2c_id); |
| |
| static struct i2c_driver wm2000_i2c_driver = { |
| .driver = { |
| .name = "wm2000", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm2000_i2c_probe, |
| .remove = wm2000_i2c_remove, |
| .id_table = wm2000_i2c_id, |
| }; |
| |
| module_i2c_driver(wm2000_i2c_driver); |
| |
| MODULE_DESCRIPTION("ASoC WM2000 driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfonmicro.com>"); |
| MODULE_LICENSE("GPL"); |