| /* |
| * Copyright (c) 2004 LSI Logic Corporation. |
| * |
| * |
| * Name: mpi_sas.h |
| * Title: MPI Serial Attached SCSI structures and definitions |
| * Creation Date: August 19, 2004 |
| * |
| * mpi_sas.h Version: 01.05.03 |
| * |
| * Version History |
| * --------------- |
| * |
| * Date Version Description |
| * -------- -------- ------------------------------------------------------ |
| * 08-19-04 01.05.01 Original release. |
| * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. |
| * Added PrimFlags and Primitive field to SAS IO Unit |
| * Control request, and added a new operation code. |
| * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, |
| * and Remove Device operations to SAS IO Unit Control. |
| * Added DevHandle field to SAS IO Unit Control request and |
| * reply. |
| * -------------------------------------------------------------------------- |
| */ |
| |
| #ifndef MPI_SAS_H |
| #define MPI_SAS_H |
| |
| |
| /* |
| * Values for SASStatus. |
| */ |
| #define MPI_SASSTATUS_SUCCESS (0x00) |
| #define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) |
| #define MPI_SASSTATUS_INVALID_FRAME (0x02) |
| #define MPI_SASSTATUS_UTC_BAD_DEST (0x03) |
| #define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) |
| #define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) |
| #define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) |
| #define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) |
| #define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) |
| #define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) |
| #define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) |
| #define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) |
| #define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) |
| #define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) |
| #define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) |
| #define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) |
| #define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) |
| #define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) |
| #define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) |
| #define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) |
| #define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) |
| |
| |
| /* |
| * Values for the SAS DeviceInfo field used in SAS Device Status Change Event |
| * data and SAS IO Unit Configuration pages. |
| */ |
| #define MPI_SAS_DEVICE_INFO_SEP (0x00004000) |
| #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) |
| #define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) |
| #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) |
| #define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) |
| #define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) |
| #define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) |
| #define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) |
| #define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) |
| #define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) |
| #define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) |
| #define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) |
| |
| #define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) |
| #define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) |
| #define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) |
| #define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) |
| #define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) |
| |
| |
| |
| /***************************************************************************** |
| * |
| * S e r i a l A t t a c h e d S C S I M e s s a g e s |
| * |
| *****************************************************************************/ |
| |
| /****************************************************************************/ |
| /* Serial Management Protocol Passthrough Request */ |
| /****************************************************************************/ |
| |
| typedef struct _MSG_SMP_PASSTHROUGH_REQUEST |
| { |
| U8 PassthroughFlags; /* 00h */ |
| U8 PhysicalPort; /* 01h */ |
| U8 ChainOffset; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 RequestDataLength; /* 04h */ |
| U8 ConnectionRate; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U32 Reserved1; /* 0Ch */ |
| U64 SASAddress; /* 10h */ |
| U32 Reserved2; /* 18h */ |
| U32 Reserved3; /* 1Ch */ |
| SGE_SIMPLE_UNION SGL; /* 20h */ |
| } MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, |
| SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; |
| |
| /* values for PassthroughFlags field */ |
| #define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) |
| |
| /* values for ConnectionRate field */ |
| #define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) |
| #define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) |
| #define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) |
| |
| |
| /* Serial Management Protocol Passthrough Reply */ |
| typedef struct _MSG_SMP_PASSTHROUGH_REPLY |
| { |
| U8 PassthroughFlags; /* 00h */ |
| U8 PhysicalPort; /* 01h */ |
| U8 MsgLength; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 ResponseDataLength; /* 04h */ |
| U8 Reserved1; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U8 Reserved2; /* 0Ch */ |
| U8 SASStatus; /* 0Dh */ |
| U16 IOCStatus; /* 0Eh */ |
| U32 IOCLogInfo; /* 10h */ |
| U32 Reserved3; /* 14h */ |
| U8 ResponseData[4]; /* 18h */ |
| } MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY, |
| SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t; |
| |
| #define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) |
| |
| |
| /****************************************************************************/ |
| /* SATA Passthrough Request */ |
| /****************************************************************************/ |
| |
| typedef struct _MSG_SATA_PASSTHROUGH_REQUEST |
| { |
| U8 TargetID; /* 00h */ |
| U8 Bus; /* 01h */ |
| U8 ChainOffset; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 PassthroughFlags; /* 04h */ |
| U8 ConnectionRate; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U32 Reserved1; /* 0Ch */ |
| U32 Reserved2; /* 10h */ |
| U32 Reserved3; /* 14h */ |
| U32 DataLength; /* 18h */ |
| U8 CommandFIS[20]; /* 1Ch */ |
| SGE_SIMPLE_UNION SGL; /* 30h */ |
| } MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST, |
| SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t; |
| |
| /* values for PassthroughFlags field */ |
| #define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) |
| #define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001) |
| |
| /* values for ConnectionRate field */ |
| #define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) |
| #define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08) |
| #define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09) |
| |
| |
| /* SATA Passthrough Reply */ |
| typedef struct _MSG_SATA_PASSTHROUGH_REPLY |
| { |
| U8 TargetID; /* 00h */ |
| U8 Bus; /* 01h */ |
| U8 MsgLength; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 PassthroughFlags; /* 04h */ |
| U8 Reserved1; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U8 Reserved2; /* 0Ch */ |
| U8 SASStatus; /* 0Dh */ |
| U16 IOCStatus; /* 0Eh */ |
| U32 IOCLogInfo; /* 10h */ |
| U8 StatusFIS[20]; /* 14h */ |
| U32 StatusControlRegisters; /* 28h */ |
| U32 TransferCount; /* 2Ch */ |
| } MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY, |
| SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t; |
| |
| |
| |
| |
| /****************************************************************************/ |
| /* SAS IO Unit Control Request */ |
| /****************************************************************************/ |
| |
| typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST |
| { |
| U8 Operation; /* 00h */ |
| U8 Reserved1; /* 01h */ |
| U8 ChainOffset; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 DevHandle; /* 04h */ |
| U8 Reserved3; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U8 TargetID; /* 0Ch */ |
| U8 Bus; /* 0Dh */ |
| U8 PhyNum; /* 0Eh */ |
| U8 PrimFlags; /* 0Fh */ |
| U32 Primitive; /* 10h */ |
| U64 SASAddress; /* 14h */ |
| U32 Reserved4; /* 1Ch */ |
| } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, |
| SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; |
| |
| /* values for the Operation field */ |
| #define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) |
| #define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) |
| #define MPI_SAS_OP_PHY_LINK_RESET (0x06) |
| #define MPI_SAS_OP_PHY_HARD_RESET (0x07) |
| #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) |
| #define MPI_SAS_OP_MAP_CURRENT (0x09) |
| #define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) |
| #define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) |
| #define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) |
| #define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) |
| |
| /* values for the PrimFlags field */ |
| #define MPI_SAS_PRIMFLAGS_SINGLE (0x08) |
| #define MPI_SAS_PRIMFLAGS_TRIPLE (0x02) |
| #define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01) |
| |
| |
| /* SAS IO Unit Control Reply */ |
| typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY |
| { |
| U8 Operation; /* 00h */ |
| U8 Reserved1; /* 01h */ |
| U8 MsgLength; /* 02h */ |
| U8 Function; /* 03h */ |
| U16 DevHandle; /* 04h */ |
| U8 Reserved3; /* 06h */ |
| U8 MsgFlags; /* 07h */ |
| U32 MsgContext; /* 08h */ |
| U16 Reserved4; /* 0Ch */ |
| U16 IOCStatus; /* 0Eh */ |
| U32 IOCLogInfo; /* 10h */ |
| } MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY, |
| SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t; |
| |
| #endif |
| |
| |
