| |
| #ifndef IEEE1394_HIGHLEVEL_H |
| #define IEEE1394_HIGHLEVEL_H |
| |
| |
| struct hpsb_address_serve { |
| struct list_head host_list; /* per host list */ |
| |
| struct list_head hl_list; /* hpsb_highlevel list */ |
| |
| struct hpsb_address_ops *op; |
| |
| struct hpsb_host *host; |
| |
| /* first address handled and first address behind, quadlet aligned */ |
| u64 start, end; |
| }; |
| |
| |
| /* |
| * The above structs are internal to highlevel driver handling. Only the |
| * following structures are of interest to actual highlevel drivers. |
| */ |
| |
| struct hpsb_highlevel { |
| struct module *owner; |
| const char *name; |
| |
| /* Any of the following pointers can legally be NULL, except for |
| * iso_receive which can only be NULL when you don't request |
| * channels. */ |
| |
| /* New host initialized. Will also be called during |
| * hpsb_register_highlevel for all hosts already installed. */ |
| void (*add_host) (struct hpsb_host *host); |
| |
| /* Host about to be removed. Will also be called during |
| * hpsb_unregister_highlevel once for each host. */ |
| void (*remove_host) (struct hpsb_host *host); |
| |
| /* Host experienced bus reset with possible configuration changes. |
| * Note that this one may occur during interrupt/bottom half handling. |
| * You can not expect to be able to do stock hpsb_reads. */ |
| void (*host_reset) (struct hpsb_host *host); |
| |
| /* An isochronous packet was received. Channel contains the channel |
| * number for your convenience, it is also contained in the included |
| * packet header (first quadlet, CRCs are missing). You may get called |
| * for channel/host combinations you did not request. */ |
| void (*iso_receive) (struct hpsb_host *host, int channel, |
| quadlet_t *data, size_t length); |
| |
| /* A write request was received on either the FCP_COMMAND (direction = |
| * 0) or the FCP_RESPONSE (direction = 1) register. The cts arg |
| * contains the cts field (first byte of data). */ |
| void (*fcp_request) (struct hpsb_host *host, int nodeid, int direction, |
| int cts, u8 *data, size_t length); |
| |
| /* These are initialized by the subsystem when the |
| * hpsb_higlevel is registered. */ |
| struct list_head hl_list; |
| struct list_head irq_list; |
| struct list_head addr_list; |
| |
| struct list_head host_info_list; |
| rwlock_t host_info_lock; |
| }; |
| |
| struct hpsb_address_ops { |
| /* |
| * Null function pointers will make the respective operation complete |
| * with RCODE_TYPE_ERROR. Makes for easy to implement read-only |
| * registers (just leave everything but read NULL). |
| * |
| * All functions shall return appropriate IEEE 1394 rcodes. |
| */ |
| |
| /* These functions have to implement block reads for themselves. */ |
| /* These functions either return a response code |
| or a negative number. In the first case a response will be generated; in the |
| later case, no response will be sent and the driver, that handled the request |
| will send the response itself |
| */ |
| int (*read) (struct hpsb_host *host, int nodeid, quadlet_t *buffer, |
| u64 addr, size_t length, u16 flags); |
| int (*write) (struct hpsb_host *host, int nodeid, int destid, |
| quadlet_t *data, u64 addr, size_t length, u16 flags); |
| |
| /* Lock transactions: write results of ext_tcode operation into |
| * *store. */ |
| int (*lock) (struct hpsb_host *host, int nodeid, quadlet_t *store, |
| u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode, u16 flags); |
| int (*lock64) (struct hpsb_host *host, int nodeid, octlet_t *store, |
| u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags); |
| }; |
| |
| |
| void highlevel_add_host(struct hpsb_host *host); |
| void highlevel_remove_host(struct hpsb_host *host); |
| void highlevel_host_reset(struct hpsb_host *host); |
| |
| |
| /* these functions are called to handle transactions. They are called, when |
| a packet arrives. The flags argument contains the second word of the first header |
| quadlet of the incoming packet (containing transaction label, retry code, |
| transaction code and priority). These functions either return a response code |
| or a negative number. In the first case a response will be generated; in the |
| later case, no response will be sent and the driver, that handled the request |
| will send the response itself. |
| */ |
| int highlevel_read(struct hpsb_host *host, int nodeid, void *data, |
| u64 addr, unsigned int length, u16 flags); |
| int highlevel_write(struct hpsb_host *host, int nodeid, int destid, |
| void *data, u64 addr, unsigned int length, u16 flags); |
| int highlevel_lock(struct hpsb_host *host, int nodeid, quadlet_t *store, |
| u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode, u16 flags); |
| int highlevel_lock64(struct hpsb_host *host, int nodeid, octlet_t *store, |
| u64 addr, octlet_t data, octlet_t arg, int ext_tcode, u16 flags); |
| |
| void highlevel_iso_receive(struct hpsb_host *host, void *data, |
| size_t length); |
| void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction, |
| void *data, size_t length); |
| |
| |
| /* |
| * Register highlevel driver. The name pointer has to stay valid at all times |
| * because the string is not copied. |
| */ |
| void hpsb_register_highlevel(struct hpsb_highlevel *hl); |
| void hpsb_unregister_highlevel(struct hpsb_highlevel *hl); |
| |
| /* |
| * Register handlers for host address spaces. Start and end are 48 bit pointers |
| * and have to be quadlet aligned (end points to the first address behind the |
| * handled addresses. This function can be called multiple times for a single |
| * hpsb_highlevel to implement sparse register sets. The requested region must |
| * not overlap any previously allocated region, otherwise registering will fail. |
| * |
| * It returns true for successful allocation. There is no unregister function, |
| * all address spaces are deallocated together with the hpsb_highlevel. |
| */ |
| u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl, |
| struct hpsb_host *host, |
| struct hpsb_address_ops *ops, |
| u64 size, u64 alignment, |
| u64 start, u64 end); |
| int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, |
| struct hpsb_address_ops *ops, u64 start, u64 end); |
| |
| int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, |
| u64 start); |
| |
| /* |
| * Enable or disable receving a certain isochronous channel through the |
| * iso_receive op. |
| */ |
| int hpsb_listen_channel(struct hpsb_highlevel *hl, struct hpsb_host *host, |
| unsigned int channel); |
| void hpsb_unlisten_channel(struct hpsb_highlevel *hl, struct hpsb_host *host, |
| unsigned int channel); |
| |
| |
| /* Retrieve a hostinfo pointer bound to this driver/host */ |
| void *hpsb_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host); |
| |
| /* Allocate a hostinfo pointer of data_size bound to this driver/host */ |
| void *hpsb_create_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host, |
| size_t data_size); |
| |
| /* Free and remove the hostinfo pointer bound to this driver/host */ |
| void hpsb_destroy_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host); |
| |
| /* Set an alternate lookup key for the hostinfo bound to this driver/host */ |
| void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host, unsigned long key); |
| |
| /* Retrieve the alternate lookup key for the hostinfo bound to this driver/host */ |
| unsigned long hpsb_get_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host); |
| |
| /* Retrieve a hostinfo pointer bound to this driver using its alternate key */ |
| void *hpsb_get_hostinfo_bykey(struct hpsb_highlevel *hl, unsigned long key); |
| |
| /* Set the hostinfo pointer to something useful. Usually follows a call to |
| * hpsb_create_hostinfo, where the size is 0. */ |
| int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host, void *data); |
| |
| /* Retrieve hpsb_host using a highlevel handle and a key */ |
| struct hpsb_host *hpsb_get_host_bykey(struct hpsb_highlevel *hl, unsigned long key); |
| |
| #endif /* IEEE1394_HIGHLEVEL_H */ |