| /*====================================================================== |
| |
| A driver for the Qlogic SCSI card |
| |
| qlogic_cs.c 1.79 2000/06/12 21:27:26 |
| |
| The contents of this file are subject to the Mozilla Public |
| License Version 1.1 (the "License"); you may not use this file |
| except in compliance with the License. You may obtain a copy of |
| the License at http://www.mozilla.org/MPL/ |
| |
| Software distributed under the License is distributed on an "AS |
| IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| implied. See the License for the specific language governing |
| rights and limitations under the License. |
| |
| The initial developer of the original code is David A. Hinds |
| <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| |
| Alternatively, the contents of this file may be used under the |
| terms of the GNU General Public License version 2 (the "GPL"), in which |
| case the provisions of the GPL are applicable instead of the |
| above. If you wish to allow the use of your version of this file |
| only under the terms of the GPL and not to allow others to use |
| your version of this file under the MPL, indicate your decision |
| by deleting the provisions above and replace them with the notice |
| and other provisions required by the GPL. If you do not delete |
| the provisions above, a recipient may use your version of this |
| file under either the MPL or the GPL. |
| |
| ======================================================================*/ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/ioport.h> |
| #include <asm/io.h> |
| #include <scsi/scsi.h> |
| #include <linux/major.h> |
| #include <linux/blkdev.h> |
| #include <scsi/scsi_ioctl.h> |
| #include <linux/interrupt.h> |
| |
| #include "scsi.h" |
| #include <scsi/scsi_host.h> |
| #include "../qlogicfas408.h" |
| |
| #include <pcmcia/version.h> |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| #include <pcmcia/ciscode.h> |
| |
| /* Set the following to 2 to use normal interrupt (active high/totempole- |
| * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open |
| * drain |
| */ |
| #define INT_TYPE 0 |
| |
| static char qlogic_name[] = "qlogic_cs"; |
| |
| #ifdef PCMCIA_DEBUG |
| static int pc_debug = PCMCIA_DEBUG; |
| module_param(pc_debug, int, 0644); |
| #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) |
| static char *version = "qlogic_cs.c 1.79-ac 2002/10/26 (David Hinds)"; |
| #else |
| #define DEBUG(n, args...) |
| #endif |
| |
| static Scsi_Host_Template qlogicfas_driver_template = { |
| .module = THIS_MODULE, |
| .name = qlogic_name, |
| .proc_name = qlogic_name, |
| .info = qlogicfas408_info, |
| .queuecommand = qlogicfas408_queuecommand, |
| .eh_abort_handler = qlogicfas408_abort, |
| .eh_bus_reset_handler = qlogicfas408_bus_reset, |
| .bios_param = qlogicfas408_biosparam, |
| .can_queue = 1, |
| .this_id = -1, |
| .sg_tablesize = SG_ALL, |
| .cmd_per_lun = 1, |
| .use_clustering = DISABLE_CLUSTERING, |
| }; |
| |
| /*====================================================================*/ |
| |
| typedef struct scsi_info_t { |
| dev_link_t link; |
| dev_node_t node; |
| struct Scsi_Host *host; |
| unsigned short manf_id; |
| } scsi_info_t; |
| |
| static void qlogic_release(dev_link_t *link); |
| static int qlogic_event(event_t event, int priority, event_callback_args_t * args); |
| |
| static dev_link_t *qlogic_attach(void); |
| static void qlogic_detach(dev_link_t *); |
| |
| |
| static dev_link_t *dev_list = NULL; |
| |
| static dev_info_t dev_info = "qlogic_cs"; |
| |
| static struct Scsi_Host *qlogic_detect(Scsi_Host_Template *host, |
| dev_link_t *link, int qbase, int qlirq) |
| { |
| int qltyp; /* type of chip */ |
| int qinitid; |
| struct Scsi_Host *shost; /* registered host structure */ |
| struct qlogicfas408_priv *priv; |
| |
| qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE); |
| qinitid = host->this_id; |
| if (qinitid < 0) |
| qinitid = 7; /* if no ID, use 7 */ |
| |
| qlogicfas408_setup(qbase, qinitid, INT_TYPE); |
| |
| host->name = qlogic_name; |
| shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv)); |
| if (!shost) |
| goto err; |
| shost->io_port = qbase; |
| shost->n_io_port = 16; |
| shost->dma_channel = -1; |
| if (qlirq != -1) |
| shost->irq = qlirq; |
| |
| priv = get_priv_by_host(shost); |
| priv->qlirq = qlirq; |
| priv->qbase = qbase; |
| priv->qinitid = qinitid; |
| priv->shost = shost; |
| priv->int_type = INT_TYPE; |
| |
| if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost)) |
| goto free_scsi_host; |
| |
| sprintf(priv->qinfo, |
| "Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d", |
| qltyp, qbase, qlirq, QL_TURBO_PDMA); |
| |
| if (scsi_add_host(shost, NULL)) |
| goto free_interrupt; |
| |
| scsi_scan_host(shost); |
| |
| return shost; |
| |
| free_interrupt: |
| free_irq(qlirq, shost); |
| |
| free_scsi_host: |
| scsi_host_put(shost); |
| |
| err: |
| return NULL; |
| } |
| static dev_link_t *qlogic_attach(void) |
| { |
| scsi_info_t *info; |
| client_reg_t client_reg; |
| dev_link_t *link; |
| int ret; |
| |
| DEBUG(0, "qlogic_attach()\n"); |
| |
| /* Create new SCSI device */ |
| info = kmalloc(sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return NULL; |
| memset(info, 0, sizeof(*info)); |
| link = &info->link; |
| link->priv = info; |
| link->io.NumPorts1 = 16; |
| link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; |
| link->io.IOAddrLines = 10; |
| link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; |
| link->irq.IRQInfo1 = IRQ_LEVEL_ID; |
| link->conf.Attributes = CONF_ENABLE_IRQ; |
| link->conf.Vcc = 50; |
| link->conf.IntType = INT_MEMORY_AND_IO; |
| link->conf.Present = PRESENT_OPTION; |
| |
| /* Register with Card Services */ |
| link->next = dev_list; |
| dev_list = link; |
| client_reg.dev_info = &dev_info; |
| client_reg.event_handler = &qlogic_event; |
| client_reg.EventMask = CS_EVENT_RESET_REQUEST | CS_EVENT_CARD_RESET | CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; |
| client_reg.Version = 0x0210; |
| client_reg.event_callback_args.client_data = link; |
| ret = pcmcia_register_client(&link->handle, &client_reg); |
| if (ret != 0) { |
| cs_error(link->handle, RegisterClient, ret); |
| qlogic_detach(link); |
| return NULL; |
| } |
| |
| return link; |
| } /* qlogic_attach */ |
| |
| /*====================================================================*/ |
| |
| static void qlogic_detach(dev_link_t * link) |
| { |
| dev_link_t **linkp; |
| |
| DEBUG(0, "qlogic_detach(0x%p)\n", link); |
| |
| /* Locate device structure */ |
| for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) |
| if (*linkp == link) |
| break; |
| if (*linkp == NULL) |
| return; |
| |
| if (link->state & DEV_CONFIG) |
| qlogic_release(link); |
| |
| if (link->handle) |
| pcmcia_deregister_client(link->handle); |
| |
| /* Unlink device structure, free bits */ |
| *linkp = link->next; |
| kfree(link->priv); |
| |
| } /* qlogic_detach */ |
| |
| /*====================================================================*/ |
| |
| #define CS_CHECK(fn, ret) \ |
| do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) |
| |
| static void qlogic_config(dev_link_t * link) |
| { |
| client_handle_t handle = link->handle; |
| scsi_info_t *info = link->priv; |
| tuple_t tuple; |
| cisparse_t parse; |
| int i, last_ret, last_fn; |
| unsigned short tuple_data[32]; |
| struct Scsi_Host *host; |
| |
| DEBUG(0, "qlogic_config(0x%p)\n", link); |
| |
| tuple.TupleData = (cisdata_t *) tuple_data; |
| tuple.TupleDataMax = 64; |
| tuple.TupleOffset = 0; |
| tuple.DesiredTuple = CISTPL_CONFIG; |
| CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); |
| CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); |
| CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); |
| link->conf.ConfigBase = parse.config.base; |
| |
| tuple.DesiredTuple = CISTPL_MANFID; |
| if ((pcmcia_get_first_tuple(handle, &tuple) == CS_SUCCESS) && (pcmcia_get_tuple_data(handle, &tuple) == CS_SUCCESS)) |
| info->manf_id = le16_to_cpu(tuple.TupleData[0]); |
| |
| /* Configure card */ |
| link->state |= DEV_CONFIG; |
| |
| tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; |
| CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); |
| while (1) { |
| if (pcmcia_get_tuple_data(handle, &tuple) != 0 || |
| pcmcia_parse_tuple(handle, &tuple, &parse) != 0) |
| goto next_entry; |
| link->conf.ConfigIndex = parse.cftable_entry.index; |
| link->io.BasePort1 = parse.cftable_entry.io.win[0].base; |
| link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; |
| if (link->io.BasePort1 != 0) { |
| i = pcmcia_request_io(handle, &link->io); |
| if (i == CS_SUCCESS) |
| break; |
| } |
| next_entry: |
| CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple)); |
| } |
| |
| CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq)); |
| CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf)); |
| |
| if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { |
| /* set ATAcmd */ |
| outb(0xb4, link->io.BasePort1 + 0xd); |
| outb(0x24, link->io.BasePort1 + 0x9); |
| outb(0x04, link->io.BasePort1 + 0xd); |
| } |
| |
| /* The KXL-810AN has a bigger IO port window */ |
| if (link->io.NumPorts1 == 32) |
| host = qlogic_detect(&qlogicfas_driver_template, link, |
| link->io.BasePort1 + 16, link->irq.AssignedIRQ); |
| else |
| host = qlogic_detect(&qlogicfas_driver_template, link, |
| link->io.BasePort1, link->irq.AssignedIRQ); |
| |
| if (!host) { |
| printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name); |
| goto out; |
| } |
| |
| sprintf(info->node.dev_name, "scsi%d", host->host_no); |
| link->dev = &info->node; |
| info->host = host; |
| |
| out: |
| link->state &= ~DEV_CONFIG_PENDING; |
| return; |
| |
| cs_failed: |
| cs_error(link->handle, last_fn, last_ret); |
| link->dev = NULL; |
| pcmcia_release_configuration(link->handle); |
| pcmcia_release_io(link->handle, &link->io); |
| pcmcia_release_irq(link->handle, &link->irq); |
| link->state &= ~DEV_CONFIG; |
| return; |
| |
| } /* qlogic_config */ |
| |
| /*====================================================================*/ |
| |
| static void qlogic_release(dev_link_t *link) |
| { |
| scsi_info_t *info = link->priv; |
| |
| DEBUG(0, "qlogic_release(0x%p)\n", link); |
| |
| scsi_remove_host(info->host); |
| link->dev = NULL; |
| |
| free_irq(link->irq.AssignedIRQ, info->host); |
| |
| pcmcia_release_configuration(link->handle); |
| pcmcia_release_io(link->handle, &link->io); |
| pcmcia_release_irq(link->handle, &link->irq); |
| |
| scsi_host_put(info->host); |
| |
| link->state &= ~DEV_CONFIG; |
| } |
| |
| /*====================================================================*/ |
| |
| static int qlogic_event(event_t event, int priority, event_callback_args_t * args) |
| { |
| dev_link_t *link = args->client_data; |
| |
| DEBUG(1, "qlogic_event(0x%06x)\n", event); |
| |
| switch (event) { |
| case CS_EVENT_CARD_REMOVAL: |
| link->state &= ~DEV_PRESENT; |
| if (link->state & DEV_CONFIG) |
| qlogic_release(link); |
| break; |
| case CS_EVENT_CARD_INSERTION: |
| link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; |
| qlogic_config(link); |
| break; |
| case CS_EVENT_PM_SUSPEND: |
| link->state |= DEV_SUSPEND; |
| /* Fall through... */ |
| case CS_EVENT_RESET_PHYSICAL: |
| if (link->state & DEV_CONFIG) |
| pcmcia_release_configuration(link->handle); |
| break; |
| case CS_EVENT_PM_RESUME: |
| link->state &= ~DEV_SUSPEND; |
| /* Fall through... */ |
| case CS_EVENT_CARD_RESET: |
| if (link->state & DEV_CONFIG) { |
| scsi_info_t *info = link->priv; |
| pcmcia_request_configuration(link->handle, &link->conf); |
| if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { |
| outb(0x80, link->io.BasePort1 + 0xd); |
| outb(0x24, link->io.BasePort1 + 0x9); |
| outb(0x04, link->io.BasePort1 + 0xd); |
| } |
| /* Ugggglllyyyy!!! */ |
| qlogicfas408_bus_reset(NULL); |
| } |
| break; |
| } |
| return 0; |
| } /* qlogic_event */ |
| |
| |
| static struct pcmcia_driver qlogic_cs_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = "qlogic_cs", |
| }, |
| .attach = qlogic_attach, |
| .detach = qlogic_detach, |
| }; |
| |
| static int __init init_qlogic_cs(void) |
| { |
| return pcmcia_register_driver(&qlogic_cs_driver); |
| } |
| |
| static void __exit exit_qlogic_cs(void) |
| { |
| pcmcia_unregister_driver(&qlogic_cs_driver); |
| BUG_ON(dev_list != NULL); |
| } |
| |
| MODULE_AUTHOR("Tom Zerucha, Michael Griffith"); |
| MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers"); |
| MODULE_LICENSE("GPL"); |
| module_init(init_qlogic_cs); |
| module_exit(exit_qlogic_cs); |