| /* |
| * arch/arm/mach-orion/addr-map.c |
| * |
| * Address map functions for Marvell Orion System On Chip |
| * |
| * Maintainer: Tzachi Perelstein <tzachi@marvell.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <asm/hardware.h> |
| #include "common.h" |
| |
| /* |
| * The Orion has fully programable address map. There's a separate address |
| * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, |
| * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own |
| * address decode windows that allow it to access any of the Orion resources. |
| * |
| * CPU address decoding -- |
| * Linux assumes that it is the boot loader that already setup the access to |
| * DDR and internal registers. |
| * Setup access to PCI and PCI-E IO/MEM space is issued by core.c. |
| * Setup access to various devices located on the device bus interface (e.g. |
| * flashes, RTC, etc) should be issued by machine-setup.c according to |
| * specific board population (by using orion_setup_cpu_win()). |
| * |
| * Non-CPU Masters address decoding -- |
| * Unlike the CPU, we setup the access from Orion's master interfaces to DDR |
| * banks only (the typical use case). |
| * Setup access for each master to DDR is issued by common.c. |
| * |
| * Note: although orion_setbits() and orion_clrbits() are not atomic |
| * no locking is necessary here since code in this file is only called |
| * at boot time when there is no concurrency issues. |
| */ |
| |
| /* |
| * Generic Address Decode Windows bit settings |
| */ |
| #define TARGET_DDR 0 |
| #define TARGET_PCI 3 |
| #define TARGET_PCIE 4 |
| #define TARGET_DEV_BUS 1 |
| #define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ |
| ((n) == 1) ? 0xd : \ |
| ((n) == 2) ? 0xb : \ |
| ((n) == 3) ? 0x7 : 0xf) |
| #define ATTR_PCIE_MEM 0x59 |
| #define ATTR_PCIE_IO 0x51 |
| #define ATTR_PCI_MEM 0x59 |
| #define ATTR_PCI_IO 0x51 |
| #define ATTR_DEV_CS0 0x1e |
| #define ATTR_DEV_CS1 0x1d |
| #define ATTR_DEV_CS2 0x1b |
| #define ATTR_DEV_BOOT 0xf |
| #define WIN_EN 1 |
| |
| /* |
| * Helpers to get DDR banks info |
| */ |
| #define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8)) |
| #define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8)) |
| #define DDR_MAX_CS 4 |
| #define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) |
| #define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) |
| #define DDR_BANK_EN 1 |
| |
| /* |
| * CPU Address Decode Windows registers |
| */ |
| #define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4)) |
| #define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4)) |
| #define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4)) |
| #define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4)) |
| #define CPU_MAX_WIN 8 |
| |
| /* |
| * Use this CPU address decode windows allocation |
| */ |
| #define CPU_WIN_PCIE_IO 0 |
| #define CPU_WIN_PCI_IO 1 |
| #define CPU_WIN_PCIE_MEM 2 |
| #define CPU_WIN_PCI_MEM 3 |
| #define CPU_WIN_DEV_BOOT 4 |
| #define CPU_WIN_DEV_CS0 5 |
| #define CPU_WIN_DEV_CS1 6 |
| #define CPU_WIN_DEV_CS2 7 |
| |
| /* |
| * PCIE Address Decode Windows registers |
| */ |
| #define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) |
| #define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) |
| #define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) |
| #define PCIE_WIN_CTRL(n) (((n) < 5) ? \ |
| ORION_PCIE_REG(0x1820 + ((n) << 4)) : \ |
| ORION_PCIE_REG(0x1880)) |
| #define PCIE_WIN_BASE(n) (((n) < 5) ? \ |
| ORION_PCIE_REG(0x1824 + ((n) << 4)) : \ |
| ORION_PCIE_REG(0x1884)) |
| #define PCIE_WIN_REMAP(n) (((n) < 5) ? \ |
| ORION_PCIE_REG(0x182c + ((n) << 4)) : \ |
| ORION_PCIE_REG(0x188c)) |
| #define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0) |
| #define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0) |
| #define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4) |
| #define PCIE_MAX_BARS 3 |
| #define PCIE_MAX_WINS 6 |
| |
| /* |
| * Use PCIE BAR '1' for all DDR banks |
| */ |
| #define PCIE_DRAM_BAR 1 |
| |
| /* |
| * PCI Address Decode Windows registers |
| */ |
| #define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \ |
| ((n) == 1) ? ORION_PCI_REG(0xd08) : \ |
| ((n) == 2) ? ORION_PCI_REG(0xc0c) : \ |
| ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0) |
| #define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \ |
| ((n) == 1) ? ORION_PCI_REG(0xd48) : \ |
| ((n) == 2) ? ORION_PCI_REG(0xc4c) : \ |
| ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0) |
| #define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c) |
| #define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4)) |
| #define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4)) |
| #define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4)) |
| #define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c) |
| |
| /* |
| * PCI configuration heleprs for BAR settings |
| */ |
| #define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) |
| #define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) |
| #define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) |
| |
| /* |
| * Gigabit Ethernet Address Decode Windows registers |
| */ |
| #define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8)) |
| #define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8)) |
| #define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4)) |
| #define ETH_WIN_EN ORION_ETH_REG(0x290) |
| #define ETH_WIN_PROT ORION_ETH_REG(0x294) |
| #define ETH_MAX_WIN 6 |
| #define ETH_MAX_REMAP_WIN 4 |
| |
| /* |
| * USB Address Decode Windows registers |
| */ |
| #define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \ |
| : ORION_USB1_REG(0x320 + ((w) << 4))) |
| #define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \ |
| : ORION_USB1_REG(0x324 + ((w) << 4))) |
| #define USB_MAX_WIN 4 |
| |
| /* |
| * SATA Address Decode Windows registers |
| */ |
| #define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10)) |
| #define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10)) |
| #define SATA_MAX_WIN 4 |
| |
| static int __init orion_cpu_win_can_remap(u32 win) |
| { |
| u32 dev, rev; |
| |
| orion_pcie_id(&dev, &rev); |
| if ((dev == MV88F5281_DEV_ID && win < 4) |
| || (dev == MV88F5182_DEV_ID && win < 2) |
| || (dev == MV88F5181_DEV_ID && win < 2)) |
| return 1; |
| |
| return 0; |
| } |
| |
| void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap) |
| { |
| u32 win, attr, ctrl; |
| |
| switch (target) { |
| case ORION_PCIE_IO: |
| target = TARGET_PCIE; |
| attr = ATTR_PCIE_IO; |
| win = CPU_WIN_PCIE_IO; |
| break; |
| case ORION_PCI_IO: |
| target = TARGET_PCI; |
| attr = ATTR_PCI_IO; |
| win = CPU_WIN_PCI_IO; |
| break; |
| case ORION_PCIE_MEM: |
| target = TARGET_PCIE; |
| attr = ATTR_PCIE_MEM; |
| win = CPU_WIN_PCIE_MEM; |
| break; |
| case ORION_PCI_MEM: |
| target = TARGET_PCI; |
| attr = ATTR_PCI_MEM; |
| win = CPU_WIN_PCI_MEM; |
| break; |
| case ORION_DEV_BOOT: |
| target = TARGET_DEV_BUS; |
| attr = ATTR_DEV_BOOT; |
| win = CPU_WIN_DEV_BOOT; |
| break; |
| case ORION_DEV0: |
| target = TARGET_DEV_BUS; |
| attr = ATTR_DEV_CS0; |
| win = CPU_WIN_DEV_CS0; |
| break; |
| case ORION_DEV1: |
| target = TARGET_DEV_BUS; |
| attr = ATTR_DEV_CS1; |
| win = CPU_WIN_DEV_CS1; |
| break; |
| case ORION_DEV2: |
| target = TARGET_DEV_BUS; |
| attr = ATTR_DEV_CS2; |
| win = CPU_WIN_DEV_CS2; |
| break; |
| case ORION_DDR: |
| case ORION_REGS: |
| /* |
| * Must be mapped by bootloader. |
| */ |
| default: |
| target = attr = win = -1; |
| BUG(); |
| } |
| |
| base &= 0xffff0000; |
| ctrl = (((size - 1) & 0xffff0000) | (attr << 8) | |
| (target << 4) | WIN_EN); |
| |
| orion_write(CPU_WIN_BASE(win), base); |
| orion_write(CPU_WIN_CTRL(win), ctrl); |
| |
| if (orion_cpu_win_can_remap(win)) { |
| if (remap >= 0) { |
| orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); |
| orion_write(CPU_WIN_REMAP_HI(win), 0); |
| } else { |
| orion_write(CPU_WIN_REMAP_LO(win), base); |
| orion_write(CPU_WIN_REMAP_HI(win), 0); |
| } |
| } |
| } |
| |
| void __init orion_setup_cpu_wins(void) |
| { |
| int i; |
| |
| /* |
| * First, disable and clear windows |
| */ |
| for (i = 0; i < CPU_MAX_WIN; i++) { |
| orion_write(CPU_WIN_BASE(i), 0); |
| orion_write(CPU_WIN_CTRL(i), 0); |
| if (orion_cpu_win_can_remap(i)) { |
| orion_write(CPU_WIN_REMAP_LO(i), 0); |
| orion_write(CPU_WIN_REMAP_HI(i), 0); |
| } |
| } |
| |
| /* |
| * Setup windows for PCI+PCIe IO+MEM space. |
| */ |
| orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE, |
| ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE); |
| orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE, |
| ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE); |
| orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE, |
| ORION_PCIE_MEM_SIZE, -1); |
| orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE, |
| ORION_PCI_MEM_SIZE, -1); |
| } |
| |
| /* |
| * Setup PCIE BARs and Address Decode Wins: |
| * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks |
| * WIN[0-3] -> DRAM bank[0-3] |
| */ |
| void __init orion_setup_pcie_wins(void) |
| { |
| u32 base, size, i; |
| |
| /* |
| * First, disable and clear BARs and windows |
| */ |
| for (i = 1; i < PCIE_MAX_BARS; i++) { |
| orion_write(PCIE_BAR_CTRL(i), 0); |
| orion_write(PCIE_BAR_LO(i), 0); |
| orion_write(PCIE_BAR_HI(i), 0); |
| } |
| |
| for (i = 0; i < PCIE_MAX_WINS; i++) { |
| orion_write(PCIE_WIN_CTRL(i), 0); |
| orion_write(PCIE_WIN_BASE(i), 0); |
| orion_write(PCIE_WIN_REMAP(i), 0); |
| } |
| |
| /* |
| * Setup windows for DDR banks. Count total DDR size on the fly. |
| */ |
| base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0))); |
| size = 0; |
| for (i = 0; i < DDR_MAX_CS; i++) { |
| u32 bank_base, bank_size; |
| bank_size = orion_read(DDR_SIZE_CS(i)); |
| bank_base = orion_read(DDR_BASE_CS(i)); |
| if (bank_size & DDR_BANK_EN) { |
| bank_size = DDR_REG_TO_SIZE(bank_size); |
| bank_base = DDR_REG_TO_BASE(bank_base); |
| orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000); |
| orion_write(PCIE_WIN_REMAP(i), 0); |
| orion_write(PCIE_WIN_CTRL(i), |
| ((bank_size-1) & 0xffff0000) | |
| (ATTR_DDR_CS(i) << 8) | |
| (TARGET_DDR << 4) | |
| (PCIE_DRAM_BAR << 1) | WIN_EN); |
| size += bank_size; |
| } |
| } |
| |
| /* |
| * Setup BAR[1] to all DRAM banks |
| */ |
| orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000); |
| orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0); |
| orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR), |
| ((size - 1) & 0xffff0000) | WIN_EN); |
| } |
| |
| void __init orion_setup_pci_wins(void) |
| { |
| u32 base, size, i; |
| |
| /* |
| * First, disable windows |
| */ |
| orion_write(PCI_BAR_ENABLE, 0xffffffff); |
| |
| /* |
| * Setup windows for DDR banks. |
| */ |
| for (i = 0; i < DDR_MAX_CS; i++) { |
| base = orion_read(DDR_BASE_CS(i)); |
| size = orion_read(DDR_SIZE_CS(i)); |
| if (size & DDR_BANK_EN) { |
| u32 bus, dev, func, reg, val; |
| size = DDR_REG_TO_SIZE(size); |
| base = DDR_REG_TO_BASE(base); |
| bus = orion_pci_local_bus_nr(); |
| dev = orion_pci_local_dev_nr(); |
| func = PCI_CONF_FUNC_BAR_CS(i); |
| reg = PCI_CONF_REG_BAR_LO_CS(i); |
| orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val); |
| orion_pci_hw_wr_conf(bus, dev, func, reg, 4, |
| (base & 0xfffff000) | (val & 0xfff)); |
| reg = PCI_CONF_REG_BAR_HI_CS(i); |
| orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0); |
| orion_write(PCI_BAR_SIZE_DDR_CS(i), |
| (size - 1) & 0xfffff000); |
| orion_write(PCI_BAR_REMAP_DDR_CS(i), |
| base & 0xfffff000); |
| orion_clrbits(PCI_BAR_ENABLE, (1 << i)); |
| } |
| } |
| |
| /* |
| * Disable automatic update of address remaping when writing to BARs |
| */ |
| orion_setbits(PCI_ADDR_DECODE_CTRL, 1); |
| } |
| |
| void __init orion_setup_usb_wins(void) |
| { |
| int i; |
| u32 usb_if, dev, rev; |
| u32 max_usb_if = 1; |
| |
| orion_pcie_id(&dev, &rev); |
| if (dev == MV88F5182_DEV_ID) |
| max_usb_if = 2; |
| |
| for (usb_if = 0; usb_if < max_usb_if; usb_if++) { |
| /* |
| * First, disable and clear windows |
| */ |
| for (i = 0; i < USB_MAX_WIN; i++) { |
| orion_write(USB_WIN_BASE(usb_if, i), 0); |
| orion_write(USB_WIN_CTRL(usb_if, i), 0); |
| } |
| |
| /* |
| * Setup windows for DDR banks. |
| */ |
| for (i = 0; i < DDR_MAX_CS; i++) { |
| u32 base, size; |
| size = orion_read(DDR_SIZE_CS(i)); |
| base = orion_read(DDR_BASE_CS(i)); |
| if (size & DDR_BANK_EN) { |
| base = DDR_REG_TO_BASE(base); |
| size = DDR_REG_TO_SIZE(size); |
| orion_write(USB_WIN_CTRL(usb_if, i), |
| ((size-1) & 0xffff0000) | |
| (ATTR_DDR_CS(i) << 8) | |
| (TARGET_DDR << 4) | WIN_EN); |
| orion_write(USB_WIN_BASE(usb_if, i), |
| base & 0xffff0000); |
| } |
| } |
| } |
| } |
| |
| void __init orion_setup_eth_wins(void) |
| { |
| int i; |
| |
| /* |
| * First, disable and clear windows |
| */ |
| for (i = 0; i < ETH_MAX_WIN; i++) { |
| orion_write(ETH_WIN_BASE(i), 0); |
| orion_write(ETH_WIN_SIZE(i), 0); |
| orion_setbits(ETH_WIN_EN, 1 << i); |
| orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); |
| if (i < ETH_MAX_REMAP_WIN) |
| orion_write(ETH_WIN_REMAP(i), 0); |
| } |
| |
| /* |
| * Setup windows for DDR banks. |
| */ |
| for (i = 0; i < DDR_MAX_CS; i++) { |
| u32 base, size; |
| size = orion_read(DDR_SIZE_CS(i)); |
| base = orion_read(DDR_BASE_CS(i)); |
| if (size & DDR_BANK_EN) { |
| base = DDR_REG_TO_BASE(base); |
| size = DDR_REG_TO_SIZE(size); |
| orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); |
| orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) | |
| (ATTR_DDR_CS(i) << 8) | |
| TARGET_DDR); |
| orion_clrbits(ETH_WIN_EN, 1 << i); |
| orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); |
| } |
| } |
| } |
| |
| void __init orion_setup_sata_wins(void) |
| { |
| int i; |
| |
| /* |
| * First, disable and clear windows |
| */ |
| for (i = 0; i < SATA_MAX_WIN; i++) { |
| orion_write(SATA_WIN_BASE(i), 0); |
| orion_write(SATA_WIN_CTRL(i), 0); |
| } |
| |
| /* |
| * Setup windows for DDR banks. |
| */ |
| for (i = 0; i < DDR_MAX_CS; i++) { |
| u32 base, size; |
| size = orion_read(DDR_SIZE_CS(i)); |
| base = orion_read(DDR_BASE_CS(i)); |
| if (size & DDR_BANK_EN) { |
| base = DDR_REG_TO_BASE(base); |
| size = DDR_REG_TO_SIZE(size); |
| orion_write(SATA_WIN_CTRL(i), |
| ((size-1) & 0xffff0000) | |
| (ATTR_DDR_CS(i) << 8) | |
| (TARGET_DDR << 4) | WIN_EN); |
| orion_write(SATA_WIN_BASE(i), |
| base & 0xffff0000); |
| } |
| } |
| } |