| /* |
| * Copyright (c) 2000-2003 Silicon Graphics, Inc. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_bit.h" |
| #include "xfs_log.h" |
| #include "xfs_inum.h" |
| #include "xfs_trans.h" |
| #include "xfs_sb.h" |
| #include "xfs_ag.h" |
| #include "xfs_alloc.h" |
| #include "xfs_quota.h" |
| #include "xfs_mount.h" |
| #include "xfs_bmap_btree.h" |
| #include "xfs_inode.h" |
| #include "xfs_bmap.h" |
| #include "xfs_rtalloc.h" |
| #include "xfs_error.h" |
| #include "xfs_itable.h" |
| #include "xfs_attr.h" |
| #include "xfs_buf_item.h" |
| #include "xfs_trans_space.h" |
| #include "xfs_trans_priv.h" |
| #include "xfs_qm.h" |
| #include "xfs_trace.h" |
| |
| |
| /* |
| LOCK ORDER |
| |
| inode lock (ilock) |
| dquot hash-chain lock (hashlock) |
| xqm dquot freelist lock (freelistlock |
| mount's dquot list lock (mplistlock) |
| user dquot lock - lock ordering among dquots is based on the uid or gid |
| group dquot lock - similar to udquots. Between the two dquots, the udquot |
| has to be locked first. |
| pin lock - the dquot lock must be held to take this lock. |
| flush lock - ditto. |
| */ |
| |
| #ifdef DEBUG |
| xfs_buftarg_t *xfs_dqerror_target; |
| int xfs_do_dqerror; |
| int xfs_dqreq_num; |
| int xfs_dqerror_mod = 33; |
| #endif |
| |
| static struct lock_class_key xfs_dquot_other_class; |
| |
| /* |
| * Allocate and initialize a dquot. We don't always allocate fresh memory; |
| * we try to reclaim a free dquot if the number of incore dquots are above |
| * a threshold. |
| * The only field inside the core that gets initialized at this point |
| * is the d_id field. The idea is to fill in the entire q_core |
| * when we read in the on disk dquot. |
| */ |
| STATIC xfs_dquot_t * |
| xfs_qm_dqinit( |
| xfs_mount_t *mp, |
| xfs_dqid_t id, |
| uint type) |
| { |
| xfs_dquot_t *dqp; |
| boolean_t brandnewdquot; |
| |
| brandnewdquot = xfs_qm_dqalloc_incore(&dqp); |
| dqp->dq_flags = type; |
| dqp->q_core.d_id = cpu_to_be32(id); |
| dqp->q_mount = mp; |
| |
| /* |
| * No need to re-initialize these if this is a reclaimed dquot. |
| */ |
| if (brandnewdquot) { |
| INIT_LIST_HEAD(&dqp->q_freelist); |
| mutex_init(&dqp->q_qlock); |
| init_waitqueue_head(&dqp->q_pinwait); |
| |
| /* |
| * Because we want to use a counting completion, complete |
| * the flush completion once to allow a single access to |
| * the flush completion without blocking. |
| */ |
| init_completion(&dqp->q_flush); |
| complete(&dqp->q_flush); |
| |
| trace_xfs_dqinit(dqp); |
| } else { |
| /* |
| * Only the q_core portion was zeroed in dqreclaim_one(). |
| * So, we need to reset others. |
| */ |
| dqp->q_nrefs = 0; |
| dqp->q_blkno = 0; |
| INIT_LIST_HEAD(&dqp->q_mplist); |
| INIT_LIST_HEAD(&dqp->q_hashlist); |
| dqp->q_bufoffset = 0; |
| dqp->q_fileoffset = 0; |
| dqp->q_transp = NULL; |
| dqp->q_gdquot = NULL; |
| dqp->q_res_bcount = 0; |
| dqp->q_res_icount = 0; |
| dqp->q_res_rtbcount = 0; |
| atomic_set(&dqp->q_pincount, 0); |
| dqp->q_hash = NULL; |
| ASSERT(list_empty(&dqp->q_freelist)); |
| |
| trace_xfs_dqreuse(dqp); |
| } |
| |
| /* |
| * In either case we need to make sure group quotas have a different |
| * lock class than user quotas, to make sure lockdep knows we can |
| * locks of one of each at the same time. |
| */ |
| if (!(type & XFS_DQ_USER)) |
| lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class); |
| |
| /* |
| * log item gets initialized later |
| */ |
| return (dqp); |
| } |
| |
| /* |
| * This is called to free all the memory associated with a dquot |
| */ |
| void |
| xfs_qm_dqdestroy( |
| xfs_dquot_t *dqp) |
| { |
| ASSERT(list_empty(&dqp->q_freelist)); |
| |
| mutex_destroy(&dqp->q_qlock); |
| kmem_zone_free(xfs_Gqm->qm_dqzone, dqp); |
| |
| atomic_dec(&xfs_Gqm->qm_totaldquots); |
| } |
| |
| /* |
| * This is what a 'fresh' dquot inside a dquot chunk looks like on disk. |
| */ |
| STATIC void |
| xfs_qm_dqinit_core( |
| xfs_dqid_t id, |
| uint type, |
| xfs_dqblk_t *d) |
| { |
| /* |
| * Caller has zero'd the entire dquot 'chunk' already. |
| */ |
| d->dd_diskdq.d_magic = cpu_to_be16(XFS_DQUOT_MAGIC); |
| d->dd_diskdq.d_version = XFS_DQUOT_VERSION; |
| d->dd_diskdq.d_id = cpu_to_be32(id); |
| d->dd_diskdq.d_flags = type; |
| } |
| |
| /* |
| * If default limits are in force, push them into the dquot now. |
| * We overwrite the dquot limits only if they are zero and this |
| * is not the root dquot. |
| */ |
| void |
| xfs_qm_adjust_dqlimits( |
| xfs_mount_t *mp, |
| xfs_disk_dquot_t *d) |
| { |
| xfs_quotainfo_t *q = mp->m_quotainfo; |
| |
| ASSERT(d->d_id); |
| |
| if (q->qi_bsoftlimit && !d->d_blk_softlimit) |
| d->d_blk_softlimit = cpu_to_be64(q->qi_bsoftlimit); |
| if (q->qi_bhardlimit && !d->d_blk_hardlimit) |
| d->d_blk_hardlimit = cpu_to_be64(q->qi_bhardlimit); |
| if (q->qi_isoftlimit && !d->d_ino_softlimit) |
| d->d_ino_softlimit = cpu_to_be64(q->qi_isoftlimit); |
| if (q->qi_ihardlimit && !d->d_ino_hardlimit) |
| d->d_ino_hardlimit = cpu_to_be64(q->qi_ihardlimit); |
| if (q->qi_rtbsoftlimit && !d->d_rtb_softlimit) |
| d->d_rtb_softlimit = cpu_to_be64(q->qi_rtbsoftlimit); |
| if (q->qi_rtbhardlimit && !d->d_rtb_hardlimit) |
| d->d_rtb_hardlimit = cpu_to_be64(q->qi_rtbhardlimit); |
| } |
| |
| /* |
| * Check the limits and timers of a dquot and start or reset timers |
| * if necessary. |
| * This gets called even when quota enforcement is OFF, which makes our |
| * life a little less complicated. (We just don't reject any quota |
| * reservations in that case, when enforcement is off). |
| * We also return 0 as the values of the timers in Q_GETQUOTA calls, when |
| * enforcement's off. |
| * In contrast, warnings are a little different in that they don't |
| * 'automatically' get started when limits get exceeded. They do |
| * get reset to zero, however, when we find the count to be under |
| * the soft limit (they are only ever set non-zero via userspace). |
| */ |
| void |
| xfs_qm_adjust_dqtimers( |
| xfs_mount_t *mp, |
| xfs_disk_dquot_t *d) |
| { |
| ASSERT(d->d_id); |
| |
| #ifdef DEBUG |
| if (d->d_blk_hardlimit) |
| ASSERT(be64_to_cpu(d->d_blk_softlimit) <= |
| be64_to_cpu(d->d_blk_hardlimit)); |
| if (d->d_ino_hardlimit) |
| ASSERT(be64_to_cpu(d->d_ino_softlimit) <= |
| be64_to_cpu(d->d_ino_hardlimit)); |
| if (d->d_rtb_hardlimit) |
| ASSERT(be64_to_cpu(d->d_rtb_softlimit) <= |
| be64_to_cpu(d->d_rtb_hardlimit)); |
| #endif |
| |
| if (!d->d_btimer) { |
| if ((d->d_blk_softlimit && |
| (be64_to_cpu(d->d_bcount) >= |
| be64_to_cpu(d->d_blk_softlimit))) || |
| (d->d_blk_hardlimit && |
| (be64_to_cpu(d->d_bcount) >= |
| be64_to_cpu(d->d_blk_hardlimit)))) { |
| d->d_btimer = cpu_to_be32(get_seconds() + |
| mp->m_quotainfo->qi_btimelimit); |
| } else { |
| d->d_bwarns = 0; |
| } |
| } else { |
| if ((!d->d_blk_softlimit || |
| (be64_to_cpu(d->d_bcount) < |
| be64_to_cpu(d->d_blk_softlimit))) && |
| (!d->d_blk_hardlimit || |
| (be64_to_cpu(d->d_bcount) < |
| be64_to_cpu(d->d_blk_hardlimit)))) { |
| d->d_btimer = 0; |
| } |
| } |
| |
| if (!d->d_itimer) { |
| if ((d->d_ino_softlimit && |
| (be64_to_cpu(d->d_icount) >= |
| be64_to_cpu(d->d_ino_softlimit))) || |
| (d->d_ino_hardlimit && |
| (be64_to_cpu(d->d_icount) >= |
| be64_to_cpu(d->d_ino_hardlimit)))) { |
| d->d_itimer = cpu_to_be32(get_seconds() + |
| mp->m_quotainfo->qi_itimelimit); |
| } else { |
| d->d_iwarns = 0; |
| } |
| } else { |
| if ((!d->d_ino_softlimit || |
| (be64_to_cpu(d->d_icount) < |
| be64_to_cpu(d->d_ino_softlimit))) && |
| (!d->d_ino_hardlimit || |
| (be64_to_cpu(d->d_icount) < |
| be64_to_cpu(d->d_ino_hardlimit)))) { |
| d->d_itimer = 0; |
| } |
| } |
| |
| if (!d->d_rtbtimer) { |
| if ((d->d_rtb_softlimit && |
| (be64_to_cpu(d->d_rtbcount) >= |
| be64_to_cpu(d->d_rtb_softlimit))) || |
| (d->d_rtb_hardlimit && |
| (be64_to_cpu(d->d_rtbcount) >= |
| be64_to_cpu(d->d_rtb_hardlimit)))) { |
| d->d_rtbtimer = cpu_to_be32(get_seconds() + |
| mp->m_quotainfo->qi_rtbtimelimit); |
| } else { |
| d->d_rtbwarns = 0; |
| } |
| } else { |
| if ((!d->d_rtb_softlimit || |
| (be64_to_cpu(d->d_rtbcount) < |
| be64_to_cpu(d->d_rtb_softlimit))) && |
| (!d->d_rtb_hardlimit || |
| (be64_to_cpu(d->d_rtbcount) < |
| be64_to_cpu(d->d_rtb_hardlimit)))) { |
| d->d_rtbtimer = 0; |
| } |
| } |
| } |
| |
| /* |
| * initialize a buffer full of dquots and log the whole thing |
| */ |
| STATIC void |
| xfs_qm_init_dquot_blk( |
| xfs_trans_t *tp, |
| xfs_mount_t *mp, |
| xfs_dqid_t id, |
| uint type, |
| xfs_buf_t *bp) |
| { |
| struct xfs_quotainfo *q = mp->m_quotainfo; |
| xfs_dqblk_t *d; |
| int curid, i; |
| |
| ASSERT(tp); |
| ASSERT(xfs_buf_islocked(bp)); |
| |
| d = bp->b_addr; |
| |
| /* |
| * ID of the first dquot in the block - id's are zero based. |
| */ |
| curid = id - (id % q->qi_dqperchunk); |
| ASSERT(curid >= 0); |
| memset(d, 0, BBTOB(q->qi_dqchunklen)); |
| for (i = 0; i < q->qi_dqperchunk; i++, d++, curid++) |
| xfs_qm_dqinit_core(curid, type, d); |
| xfs_trans_dquot_buf(tp, bp, |
| (type & XFS_DQ_USER ? XFS_BLF_UDQUOT_BUF : |
| ((type & XFS_DQ_PROJ) ? XFS_BLF_PDQUOT_BUF : |
| XFS_BLF_GDQUOT_BUF))); |
| xfs_trans_log_buf(tp, bp, 0, BBTOB(q->qi_dqchunklen) - 1); |
| } |
| |
| |
| |
| /* |
| * Allocate a block and fill it with dquots. |
| * This is called when the bmapi finds a hole. |
| */ |
| STATIC int |
| xfs_qm_dqalloc( |
| xfs_trans_t **tpp, |
| xfs_mount_t *mp, |
| xfs_dquot_t *dqp, |
| xfs_inode_t *quotip, |
| xfs_fileoff_t offset_fsb, |
| xfs_buf_t **O_bpp) |
| { |
| xfs_fsblock_t firstblock; |
| xfs_bmap_free_t flist; |
| xfs_bmbt_irec_t map; |
| int nmaps, error, committed; |
| xfs_buf_t *bp; |
| xfs_trans_t *tp = *tpp; |
| |
| ASSERT(tp != NULL); |
| |
| trace_xfs_dqalloc(dqp); |
| |
| /* |
| * Initialize the bmap freelist prior to calling bmapi code. |
| */ |
| xfs_bmap_init(&flist, &firstblock); |
| xfs_ilock(quotip, XFS_ILOCK_EXCL); |
| /* |
| * Return if this type of quotas is turned off while we didn't |
| * have an inode lock |
| */ |
| if (XFS_IS_THIS_QUOTA_OFF(dqp)) { |
| xfs_iunlock(quotip, XFS_ILOCK_EXCL); |
| return (ESRCH); |
| } |
| |
| xfs_trans_ijoin_ref(tp, quotip, XFS_ILOCK_EXCL); |
| nmaps = 1; |
| if ((error = xfs_bmapi(tp, quotip, |
| offset_fsb, XFS_DQUOT_CLUSTER_SIZE_FSB, |
| XFS_BMAPI_METADATA | XFS_BMAPI_WRITE, |
| &firstblock, |
| XFS_QM_DQALLOC_SPACE_RES(mp), |
| &map, &nmaps, &flist))) { |
| goto error0; |
| } |
| ASSERT(map.br_blockcount == XFS_DQUOT_CLUSTER_SIZE_FSB); |
| ASSERT(nmaps == 1); |
| ASSERT((map.br_startblock != DELAYSTARTBLOCK) && |
| (map.br_startblock != HOLESTARTBLOCK)); |
| |
| /* |
| * Keep track of the blkno to save a lookup later |
| */ |
| dqp->q_blkno = XFS_FSB_TO_DADDR(mp, map.br_startblock); |
| |
| /* now we can just get the buffer (there's nothing to read yet) */ |
| bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, |
| dqp->q_blkno, |
| mp->m_quotainfo->qi_dqchunklen, |
| 0); |
| |
| error = xfs_buf_geterror(bp); |
| if (error) |
| goto error1; |
| |
| /* |
| * Make a chunk of dquots out of this buffer and log |
| * the entire thing. |
| */ |
| xfs_qm_init_dquot_blk(tp, mp, be32_to_cpu(dqp->q_core.d_id), |
| dqp->dq_flags & XFS_DQ_ALLTYPES, bp); |
| |
| /* |
| * xfs_bmap_finish() may commit the current transaction and |
| * start a second transaction if the freelist is not empty. |
| * |
| * Since we still want to modify this buffer, we need to |
| * ensure that the buffer is not released on commit of |
| * the first transaction and ensure the buffer is added to the |
| * second transaction. |
| * |
| * If there is only one transaction then don't stop the buffer |
| * from being released when it commits later on. |
| */ |
| |
| xfs_trans_bhold(tp, bp); |
| |
| if ((error = xfs_bmap_finish(tpp, &flist, &committed))) { |
| goto error1; |
| } |
| |
| if (committed) { |
| tp = *tpp; |
| xfs_trans_bjoin(tp, bp); |
| } else { |
| xfs_trans_bhold_release(tp, bp); |
| } |
| |
| *O_bpp = bp; |
| return 0; |
| |
| error1: |
| xfs_bmap_cancel(&flist); |
| error0: |
| xfs_iunlock(quotip, XFS_ILOCK_EXCL); |
| |
| return (error); |
| } |
| |
| /* |
| * Maps a dquot to the buffer containing its on-disk version. |
| * This returns a ptr to the buffer containing the on-disk dquot |
| * in the bpp param, and a ptr to the on-disk dquot within that buffer |
| */ |
| STATIC int |
| xfs_qm_dqtobp( |
| xfs_trans_t **tpp, |
| xfs_dquot_t *dqp, |
| xfs_disk_dquot_t **O_ddpp, |
| xfs_buf_t **O_bpp, |
| uint flags) |
| { |
| xfs_bmbt_irec_t map; |
| int nmaps = 1, error; |
| xfs_buf_t *bp; |
| xfs_inode_t *quotip = XFS_DQ_TO_QIP(dqp); |
| xfs_mount_t *mp = dqp->q_mount; |
| xfs_disk_dquot_t *ddq; |
| xfs_dqid_t id = be32_to_cpu(dqp->q_core.d_id); |
| xfs_trans_t *tp = (tpp ? *tpp : NULL); |
| |
| dqp->q_fileoffset = (xfs_fileoff_t)id / mp->m_quotainfo->qi_dqperchunk; |
| |
| xfs_ilock(quotip, XFS_ILOCK_SHARED); |
| if (XFS_IS_THIS_QUOTA_OFF(dqp)) { |
| /* |
| * Return if this type of quotas is turned off while we |
| * didn't have the quota inode lock. |
| */ |
| xfs_iunlock(quotip, XFS_ILOCK_SHARED); |
| return ESRCH; |
| } |
| |
| /* |
| * Find the block map; no allocations yet |
| */ |
| error = xfs_bmapi(NULL, quotip, dqp->q_fileoffset, |
| XFS_DQUOT_CLUSTER_SIZE_FSB, XFS_BMAPI_METADATA, |
| NULL, 0, &map, &nmaps, NULL); |
| |
| xfs_iunlock(quotip, XFS_ILOCK_SHARED); |
| if (error) |
| return error; |
| |
| ASSERT(nmaps == 1); |
| ASSERT(map.br_blockcount == 1); |
| |
| /* |
| * Offset of dquot in the (fixed sized) dquot chunk. |
| */ |
| dqp->q_bufoffset = (id % mp->m_quotainfo->qi_dqperchunk) * |
| sizeof(xfs_dqblk_t); |
| |
| ASSERT(map.br_startblock != DELAYSTARTBLOCK); |
| if (map.br_startblock == HOLESTARTBLOCK) { |
| /* |
| * We don't allocate unless we're asked to |
| */ |
| if (!(flags & XFS_QMOPT_DQALLOC)) |
| return ENOENT; |
| |
| ASSERT(tp); |
| error = xfs_qm_dqalloc(tpp, mp, dqp, quotip, |
| dqp->q_fileoffset, &bp); |
| if (error) |
| return error; |
| tp = *tpp; |
| } else { |
| trace_xfs_dqtobp_read(dqp); |
| |
| /* |
| * store the blkno etc so that we don't have to do the |
| * mapping all the time |
| */ |
| dqp->q_blkno = XFS_FSB_TO_DADDR(mp, map.br_startblock); |
| |
| error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, |
| dqp->q_blkno, |
| mp->m_quotainfo->qi_dqchunklen, |
| 0, &bp); |
| if (error || !bp) |
| return XFS_ERROR(error); |
| } |
| |
| ASSERT(xfs_buf_islocked(bp)); |
| |
| /* |
| * calculate the location of the dquot inside the buffer. |
| */ |
| ddq = bp->b_addr + dqp->q_bufoffset; |
| |
| /* |
| * A simple sanity check in case we got a corrupted dquot... |
| */ |
| error = xfs_qm_dqcheck(mp, ddq, id, dqp->dq_flags & XFS_DQ_ALLTYPES, |
| flags & (XFS_QMOPT_DQREPAIR|XFS_QMOPT_DOWARN), |
| "dqtobp"); |
| if (error) { |
| if (!(flags & XFS_QMOPT_DQREPAIR)) { |
| xfs_trans_brelse(tp, bp); |
| return XFS_ERROR(EIO); |
| } |
| } |
| |
| *O_bpp = bp; |
| *O_ddpp = ddq; |
| |
| return (0); |
| } |
| |
| |
| /* |
| * Read in the ondisk dquot using dqtobp() then copy it to an incore version, |
| * and release the buffer immediately. |
| * |
| */ |
| /* ARGSUSED */ |
| STATIC int |
| xfs_qm_dqread( |
| xfs_trans_t **tpp, |
| xfs_dqid_t id, |
| xfs_dquot_t *dqp, /* dquot to get filled in */ |
| uint flags) |
| { |
| xfs_disk_dquot_t *ddqp; |
| xfs_buf_t *bp; |
| int error; |
| xfs_trans_t *tp; |
| |
| ASSERT(tpp); |
| |
| trace_xfs_dqread(dqp); |
| |
| /* |
| * get a pointer to the on-disk dquot and the buffer containing it |
| * dqp already knows its own type (GROUP/USER). |
| */ |
| if ((error = xfs_qm_dqtobp(tpp, dqp, &ddqp, &bp, flags))) { |
| return (error); |
| } |
| tp = *tpp; |
| |
| /* copy everything from disk dquot to the incore dquot */ |
| memcpy(&dqp->q_core, ddqp, sizeof(xfs_disk_dquot_t)); |
| ASSERT(be32_to_cpu(dqp->q_core.d_id) == id); |
| xfs_qm_dquot_logitem_init(dqp); |
| |
| /* |
| * Reservation counters are defined as reservation plus current usage |
| * to avoid having to add every time. |
| */ |
| dqp->q_res_bcount = be64_to_cpu(ddqp->d_bcount); |
| dqp->q_res_icount = be64_to_cpu(ddqp->d_icount); |
| dqp->q_res_rtbcount = be64_to_cpu(ddqp->d_rtbcount); |
| |
| /* Mark the buf so that this will stay incore a little longer */ |
| XFS_BUF_SET_VTYPE_REF(bp, B_FS_DQUOT, XFS_DQUOT_REF); |
| |
| /* |
| * We got the buffer with a xfs_trans_read_buf() (in dqtobp()) |
| * So we need to release with xfs_trans_brelse(). |
| * The strategy here is identical to that of inodes; we lock |
| * the dquot in xfs_qm_dqget() before making it accessible to |
| * others. This is because dquots, like inodes, need a good level of |
| * concurrency, and we don't want to take locks on the entire buffers |
| * for dquot accesses. |
| * Note also that the dquot buffer may even be dirty at this point, if |
| * this particular dquot was repaired. We still aren't afraid to |
| * brelse it because we have the changes incore. |
| */ |
| ASSERT(xfs_buf_islocked(bp)); |
| xfs_trans_brelse(tp, bp); |
| |
| return (error); |
| } |
| |
| |
| /* |
| * allocate an incore dquot from the kernel heap, |
| * and fill its core with quota information kept on disk. |
| * If XFS_QMOPT_DQALLOC is set, it'll allocate a dquot on disk |
| * if it wasn't already allocated. |
| */ |
| STATIC int |
| xfs_qm_idtodq( |
| xfs_mount_t *mp, |
| xfs_dqid_t id, /* gid or uid, depending on type */ |
| uint type, /* UDQUOT or GDQUOT */ |
| uint flags, /* DQALLOC, DQREPAIR */ |
| xfs_dquot_t **O_dqpp)/* OUT : incore dquot, not locked */ |
| { |
| xfs_dquot_t *dqp; |
| int error; |
| xfs_trans_t *tp; |
| int cancelflags=0; |
| |
| dqp = xfs_qm_dqinit(mp, id, type); |
| tp = NULL; |
| if (flags & XFS_QMOPT_DQALLOC) { |
| tp = xfs_trans_alloc(mp, XFS_TRANS_QM_DQALLOC); |
| error = xfs_trans_reserve(tp, XFS_QM_DQALLOC_SPACE_RES(mp), |
| XFS_WRITE_LOG_RES(mp) + |
| BBTOB(mp->m_quotainfo->qi_dqchunklen) - 1 + |
| 128, |
| 0, |
| XFS_TRANS_PERM_LOG_RES, |
| XFS_WRITE_LOG_COUNT); |
| if (error) { |
| cancelflags = 0; |
| goto error0; |
| } |
| cancelflags = XFS_TRANS_RELEASE_LOG_RES; |
| } |
| |
| /* |
| * Read it from disk; xfs_dqread() takes care of |
| * all the necessary initialization of dquot's fields (locks, etc) |
| */ |
| if ((error = xfs_qm_dqread(&tp, id, dqp, flags))) { |
| /* |
| * This can happen if quotas got turned off (ESRCH), |
| * or if the dquot didn't exist on disk and we ask to |
| * allocate (ENOENT). |
| */ |
| trace_xfs_dqread_fail(dqp); |
| cancelflags |= XFS_TRANS_ABORT; |
| goto error0; |
| } |
| if (tp) { |
| if ((error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES))) |
| goto error1; |
| } |
| |
| *O_dqpp = dqp; |
| return (0); |
| |
| error0: |
| ASSERT(error); |
| if (tp) |
| xfs_trans_cancel(tp, cancelflags); |
| error1: |
| xfs_qm_dqdestroy(dqp); |
| *O_dqpp = NULL; |
| return (error); |
| } |
| |
| /* |
| * Lookup a dquot in the incore dquot hashtable. We keep two separate |
| * hashtables for user and group dquots; and, these are global tables |
| * inside the XQM, not per-filesystem tables. |
| * The hash chain must be locked by caller, and it is left locked |
| * on return. Returning dquot is locked. |
| */ |
| STATIC int |
| xfs_qm_dqlookup( |
| xfs_mount_t *mp, |
| xfs_dqid_t id, |
| xfs_dqhash_t *qh, |
| xfs_dquot_t **O_dqpp) |
| { |
| xfs_dquot_t *dqp; |
| uint flist_locked; |
| |
| ASSERT(mutex_is_locked(&qh->qh_lock)); |
| |
| flist_locked = B_FALSE; |
| |
| /* |
| * Traverse the hashchain looking for a match |
| */ |
| list_for_each_entry(dqp, &qh->qh_list, q_hashlist) { |
| /* |
| * We already have the hashlock. We don't need the |
| * dqlock to look at the id field of the dquot, since the |
| * id can't be modified without the hashlock anyway. |
| */ |
| if (be32_to_cpu(dqp->q_core.d_id) == id && dqp->q_mount == mp) { |
| trace_xfs_dqlookup_found(dqp); |
| |
| /* |
| * All in core dquots must be on the dqlist of mp |
| */ |
| ASSERT(!list_empty(&dqp->q_mplist)); |
| |
| xfs_dqlock(dqp); |
| if (dqp->q_nrefs == 0) { |
| ASSERT(!list_empty(&dqp->q_freelist)); |
| if (!mutex_trylock(&xfs_Gqm->qm_dqfrlist_lock)) { |
| trace_xfs_dqlookup_want(dqp); |
| |
| /* |
| * We may have raced with dqreclaim_one() |
| * (and lost). So, flag that we don't |
| * want the dquot to be reclaimed. |
| */ |
| dqp->dq_flags |= XFS_DQ_WANT; |
| xfs_dqunlock(dqp); |
| mutex_lock(&xfs_Gqm->qm_dqfrlist_lock); |
| xfs_dqlock(dqp); |
| dqp->dq_flags &= ~(XFS_DQ_WANT); |
| } |
| flist_locked = B_TRUE; |
| } |
| |
| /* |
| * id couldn't have changed; we had the hashlock all |
| * along |
| */ |
| ASSERT(be32_to_cpu(dqp->q_core.d_id) == id); |
| |
| if (flist_locked) { |
| if (dqp->q_nrefs != 0) { |
| mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock); |
| flist_locked = B_FALSE; |
| } else { |
| /* take it off the freelist */ |
| trace_xfs_dqlookup_freelist(dqp); |
| list_del_init(&dqp->q_freelist); |
| xfs_Gqm->qm_dqfrlist_cnt--; |
| } |
| } |
| |
| XFS_DQHOLD(dqp); |
| |
| if (flist_locked) |
| mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock); |
| /* |
| * move the dquot to the front of the hashchain |
| */ |
| ASSERT(mutex_is_locked(&qh->qh_lock)); |
| list_move(&dqp->q_hashlist, &qh->qh_list); |
| trace_xfs_dqlookup_done(dqp); |
| *O_dqpp = dqp; |
| return 0; |
| } |
| } |
| |
| *O_dqpp = NULL; |
| ASSERT(mutex_is_locked(&qh->qh_lock)); |
| return (1); |
| } |
| |
| /* |
| * Given the file system, inode OR id, and type (UDQUOT/GDQUOT), return a |
| * a locked dquot, doing an allocation (if requested) as needed. |
| * When both an inode and an id are given, the inode's id takes precedence. |
| * That is, if the id changes while we don't hold the ilock inside this |
| * function, the new dquot is returned, not necessarily the one requested |
| * in the id argument. |
| */ |
| int |
| xfs_qm_dqget( |
| xfs_mount_t *mp, |
| xfs_inode_t *ip, /* locked inode (optional) */ |
| xfs_dqid_t id, /* uid/projid/gid depending on type */ |
| uint type, /* XFS_DQ_USER/XFS_DQ_PROJ/XFS_DQ_GROUP */ |
| uint flags, /* DQALLOC, DQSUSER, DQREPAIR, DOWARN */ |
| xfs_dquot_t **O_dqpp) /* OUT : locked incore dquot */ |
| { |
| xfs_dquot_t *dqp; |
| xfs_dqhash_t *h; |
| uint version; |
| int error; |
| |
| ASSERT(XFS_IS_QUOTA_RUNNING(mp)); |
| if ((! XFS_IS_UQUOTA_ON(mp) && type == XFS_DQ_USER) || |
| (! XFS_IS_PQUOTA_ON(mp) && type == XFS_DQ_PROJ) || |
| (! XFS_IS_GQUOTA_ON(mp) && type == XFS_DQ_GROUP)) { |
| return (ESRCH); |
| } |
| h = XFS_DQ_HASH(mp, id, type); |
| |
| #ifdef DEBUG |
| if (xfs_do_dqerror) { |
| if ((xfs_dqerror_target == mp->m_ddev_targp) && |
| (xfs_dqreq_num++ % xfs_dqerror_mod) == 0) { |
| xfs_debug(mp, "Returning error in dqget"); |
| return (EIO); |
| } |
| } |
| #endif |
| |
| again: |
| |
| #ifdef DEBUG |
| ASSERT(type == XFS_DQ_USER || |
| type == XFS_DQ_PROJ || |
| type == XFS_DQ_GROUP); |
| if (ip) { |
| ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); |
| if (type == XFS_DQ_USER) |
| ASSERT(ip->i_udquot == NULL); |
| else |
| ASSERT(ip->i_gdquot == NULL); |
| } |
| #endif |
| mutex_lock(&h->qh_lock); |
| |
| /* |
| * Look in the cache (hashtable). |
| * The chain is kept locked during lookup. |
| */ |
| if (xfs_qm_dqlookup(mp, id, h, O_dqpp) == 0) { |
| XQM_STATS_INC(xqmstats.xs_qm_dqcachehits); |
| /* |
| * The dquot was found, moved to the front of the chain, |
| * taken off the freelist if it was on it, and locked |
| * at this point. Just unlock the hashchain and return. |
| */ |
| ASSERT(*O_dqpp); |
| ASSERT(XFS_DQ_IS_LOCKED(*O_dqpp)); |
| mutex_unlock(&h->qh_lock); |
| trace_xfs_dqget_hit(*O_dqpp); |
| return (0); /* success */ |
| } |
| XQM_STATS_INC(xqmstats.xs_qm_dqcachemisses); |
| |
| /* |
| * Dquot cache miss. We don't want to keep the inode lock across |
| * a (potential) disk read. Also we don't want to deal with the lock |
| * ordering between quotainode and this inode. OTOH, dropping the inode |
| * lock here means dealing with a chown that can happen before |
| * we re-acquire the lock. |
| */ |
| if (ip) |
| xfs_iunlock(ip, XFS_ILOCK_EXCL); |
| /* |
| * Save the hashchain version stamp, and unlock the chain, so that |
| * we don't keep the lock across a disk read |
| */ |
| version = h->qh_version; |
| mutex_unlock(&h->qh_lock); |
| |
| /* |
| * Allocate the dquot on the kernel heap, and read the ondisk |
| * portion off the disk. Also, do all the necessary initialization |
| * This can return ENOENT if dquot didn't exist on disk and we didn't |
| * ask it to allocate; ESRCH if quotas got turned off suddenly. |
| */ |
| if ((error = xfs_qm_idtodq(mp, id, type, |
| flags & (XFS_QMOPT_DQALLOC|XFS_QMOPT_DQREPAIR| |
| XFS_QMOPT_DOWARN), |
| &dqp))) { |
| if (ip) |
| xfs_ilock(ip, XFS_ILOCK_EXCL); |
| return (error); |
| } |
| |
| /* |
| * See if this is mount code calling to look at the overall quota limits |
| * which are stored in the id == 0 user or group's dquot. |
| * Since we may not have done a quotacheck by this point, just return |
| * the dquot without attaching it to any hashtables, lists, etc, or even |
| * taking a reference. |
| * The caller must dqdestroy this once done. |
| */ |
| if (flags & XFS_QMOPT_DQSUSER) { |
| ASSERT(id == 0); |
| ASSERT(! ip); |
| goto dqret; |
| } |
| |
| /* |
| * Dquot lock comes after hashlock in the lock ordering |
| */ |
| if (ip) { |
| xfs_ilock(ip, XFS_ILOCK_EXCL); |
| |
| /* |
| * A dquot could be attached to this inode by now, since |
| * we had dropped the ilock. |
| */ |
| if (type == XFS_DQ_USER) { |
| if (!XFS_IS_UQUOTA_ON(mp)) { |
| /* inode stays locked on return */ |
| xfs_qm_dqdestroy(dqp); |
| return XFS_ERROR(ESRCH); |
| } |
| if (ip->i_udquot) { |
| xfs_qm_dqdestroy(dqp); |
| dqp = ip->i_udquot; |
| xfs_dqlock(dqp); |
| goto dqret; |
| } |
| } else { |
| if (!XFS_IS_OQUOTA_ON(mp)) { |
| /* inode stays locked on return */ |
| xfs_qm_dqdestroy(dqp); |
| return XFS_ERROR(ESRCH); |
| } |
| if (ip->i_gdquot) { |
| xfs_qm_dqdestroy(dqp); |
| dqp = ip->i_gdquot; |
| xfs_dqlock(dqp); |
| goto dqret; |
| } |
| } |
| } |
| |
| /* |
| * Hashlock comes after ilock in lock order |
| */ |
| mutex_lock(&h->qh_lock); |
| if (version != h->qh_version) { |
| xfs_dquot_t *tmpdqp; |
| /* |
| * Now, see if somebody else put the dquot in the |
| * hashtable before us. This can happen because we didn't |
| * keep the hashchain lock. We don't have to worry about |
| * lock order between the two dquots here since dqp isn't |
| * on any findable lists yet. |
| */ |
| if (xfs_qm_dqlookup(mp, id, h, &tmpdqp) == 0) { |
| /* |
| * Duplicate found. Just throw away the new dquot |
| * and start over. |
| */ |
| xfs_qm_dqput(tmpdqp); |
| mutex_unlock(&h->qh_lock); |
| xfs_qm_dqdestroy(dqp); |
| XQM_STATS_INC(xqmstats.xs_qm_dquot_dups); |
| goto again; |
| } |
| } |
| |
| /* |
| * Put the dquot at the beginning of the hash-chain and mp's list |
| * LOCK ORDER: hashlock, freelistlock, mplistlock, udqlock, gdqlock .. |
| */ |
| ASSERT(mutex_is_locked(&h->qh_lock)); |
| dqp->q_hash = h; |
| list_add(&dqp->q_hashlist, &h->qh_list); |
| h->qh_version++; |
| |
| /* |
| * Attach this dquot to this filesystem's list of all dquots, |
| * kept inside the mount structure in m_quotainfo field |
| */ |
| mutex_lock(&mp->m_quotainfo->qi_dqlist_lock); |
| |
| /* |
| * We return a locked dquot to the caller, with a reference taken |
| */ |
| xfs_dqlock(dqp); |
| dqp->q_nrefs = 1; |
| |
| list_add(&dqp->q_mplist, &mp->m_quotainfo->qi_dqlist); |
| mp->m_quotainfo->qi_dquots++; |
| mutex_unlock(&mp->m_quotainfo->qi_dqlist_lock); |
| mutex_unlock(&h->qh_lock); |
| dqret: |
| ASSERT((ip == NULL) || xfs_isilocked(ip, XFS_ILOCK_EXCL)); |
| trace_xfs_dqget_miss(dqp); |
| *O_dqpp = dqp; |
| return (0); |
| } |
| |
| |
| /* |
| * Release a reference to the dquot (decrement ref-count) |
| * and unlock it. If there is a group quota attached to this |
| * dquot, carefully release that too without tripping over |
| * deadlocks'n'stuff. |
| */ |
| void |
| xfs_qm_dqput( |
| xfs_dquot_t *dqp) |
| { |
| xfs_dquot_t *gdqp; |
| |
| ASSERT(dqp->q_nrefs > 0); |
| ASSERT(XFS_DQ_IS_LOCKED(dqp)); |
| |
| trace_xfs_dqput(dqp); |
| |
| if (dqp->q_nrefs != 1) { |
| dqp->q_nrefs--; |
| xfs_dqunlock(dqp); |
| return; |
| } |
| |
| /* |
| * drop the dqlock and acquire the freelist and dqlock |
| * in the right order; but try to get it out-of-order first |
| */ |
| if (!mutex_trylock(&xfs_Gqm->qm_dqfrlist_lock)) { |
| trace_xfs_dqput_wait(dqp); |
| xfs_dqunlock(dqp); |
| mutex_lock(&xfs_Gqm->qm_dqfrlist_lock); |
| xfs_dqlock(dqp); |
| } |
| |
| while (1) { |
| gdqp = NULL; |
| |
| /* We can't depend on nrefs being == 1 here */ |
| if (--dqp->q_nrefs == 0) { |
| trace_xfs_dqput_free(dqp); |
| |
| list_add_tail(&dqp->q_freelist, &xfs_Gqm->qm_dqfrlist); |
| xfs_Gqm->qm_dqfrlist_cnt++; |
| |
| /* |
| * If we just added a udquot to the freelist, then |
| * we want to release the gdquot reference that |
| * it (probably) has. Otherwise it'll keep the |
| * gdquot from getting reclaimed. |
| */ |
| if ((gdqp = dqp->q_gdquot)) { |
| /* |
| * Avoid a recursive dqput call |
| */ |
| xfs_dqlock(gdqp); |
| dqp->q_gdquot = NULL; |
| } |
| } |
| xfs_dqunlock(dqp); |
| |
| /* |
| * If we had a group quota inside the user quota as a hint, |
| * release it now. |
| */ |
| if (! gdqp) |
| break; |
| dqp = gdqp; |
| } |
| mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock); |
| } |
| |
| /* |
| * Release a dquot. Flush it if dirty, then dqput() it. |
| * dquot must not be locked. |
| */ |
| void |
| xfs_qm_dqrele( |
| xfs_dquot_t *dqp) |
| { |
| if (!dqp) |
| return; |
| |
| trace_xfs_dqrele(dqp); |
| |
| xfs_dqlock(dqp); |
| /* |
| * We don't care to flush it if the dquot is dirty here. |
| * That will create stutters that we want to avoid. |
| * Instead we do a delayed write when we try to reclaim |
| * a dirty dquot. Also xfs_sync will take part of the burden... |
| */ |
| xfs_qm_dqput(dqp); |
| } |
| |
| /* |
| * This is the dquot flushing I/O completion routine. It is called |
| * from interrupt level when the buffer containing the dquot is |
| * flushed to disk. It is responsible for removing the dquot logitem |
| * from the AIL if it has not been re-logged, and unlocking the dquot's |
| * flush lock. This behavior is very similar to that of inodes.. |
| */ |
| STATIC void |
| xfs_qm_dqflush_done( |
| struct xfs_buf *bp, |
| struct xfs_log_item *lip) |
| { |
| xfs_dq_logitem_t *qip = (struct xfs_dq_logitem *)lip; |
| xfs_dquot_t *dqp = qip->qli_dquot; |
| struct xfs_ail *ailp = lip->li_ailp; |
| |
| /* |
| * We only want to pull the item from the AIL if its |
| * location in the log has not changed since we started the flush. |
| * Thus, we only bother if the dquot's lsn has |
| * not changed. First we check the lsn outside the lock |
| * since it's cheaper, and then we recheck while |
| * holding the lock before removing the dquot from the AIL. |
| */ |
| if ((lip->li_flags & XFS_LI_IN_AIL) && |
| lip->li_lsn == qip->qli_flush_lsn) { |
| |
| /* xfs_trans_ail_delete() drops the AIL lock. */ |
| spin_lock(&ailp->xa_lock); |
| if (lip->li_lsn == qip->qli_flush_lsn) |
| xfs_trans_ail_delete(ailp, lip); |
| else |
| spin_unlock(&ailp->xa_lock); |
| } |
| |
| /* |
| * Release the dq's flush lock since we're done with it. |
| */ |
| xfs_dqfunlock(dqp); |
| } |
| |
| /* |
| * Write a modified dquot to disk. |
| * The dquot must be locked and the flush lock too taken by caller. |
| * The flush lock will not be unlocked until the dquot reaches the disk, |
| * but the dquot is free to be unlocked and modified by the caller |
| * in the interim. Dquot is still locked on return. This behavior is |
| * identical to that of inodes. |
| */ |
| int |
| xfs_qm_dqflush( |
| xfs_dquot_t *dqp, |
| uint flags) |
| { |
| struct xfs_mount *mp = dqp->q_mount; |
| struct xfs_buf *bp; |
| struct xfs_disk_dquot *ddqp; |
| int error; |
| |
| ASSERT(XFS_DQ_IS_LOCKED(dqp)); |
| ASSERT(!completion_done(&dqp->q_flush)); |
| |
| trace_xfs_dqflush(dqp); |
| |
| /* |
| * If not dirty, or it's pinned and we are not supposed to block, nada. |
| */ |
| if (!XFS_DQ_IS_DIRTY(dqp) || |
| (!(flags & SYNC_WAIT) && atomic_read(&dqp->q_pincount) > 0)) { |
| xfs_dqfunlock(dqp); |
| return 0; |
| } |
| xfs_qm_dqunpin_wait(dqp); |
| |
| /* |
| * This may have been unpinned because the filesystem is shutting |
| * down forcibly. If that's the case we must not write this dquot |
| * to disk, because the log record didn't make it to disk! |
| */ |
| if (XFS_FORCED_SHUTDOWN(mp)) { |
| dqp->dq_flags &= ~XFS_DQ_DIRTY; |
| xfs_dqfunlock(dqp); |
| return XFS_ERROR(EIO); |
| } |
| |
| /* |
| * Get the buffer containing the on-disk dquot |
| */ |
| error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, dqp->q_blkno, |
| mp->m_quotainfo->qi_dqchunklen, 0, &bp); |
| if (error) { |
| ASSERT(error != ENOENT); |
| xfs_dqfunlock(dqp); |
| return error; |
| } |
| |
| /* |
| * Calculate the location of the dquot inside the buffer. |
| */ |
| ddqp = bp->b_addr + dqp->q_bufoffset; |
| |
| /* |
| * A simple sanity check in case we got a corrupted dquot.. |
| */ |
| error = xfs_qm_dqcheck(mp, &dqp->q_core, be32_to_cpu(ddqp->d_id), 0, |
| XFS_QMOPT_DOWARN, "dqflush (incore copy)"); |
| if (error) { |
| xfs_buf_relse(bp); |
| xfs_dqfunlock(dqp); |
| xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); |
| return XFS_ERROR(EIO); |
| } |
| |
| /* This is the only portion of data that needs to persist */ |
| memcpy(ddqp, &dqp->q_core, sizeof(xfs_disk_dquot_t)); |
| |
| /* |
| * Clear the dirty field and remember the flush lsn for later use. |
| */ |
| dqp->dq_flags &= ~XFS_DQ_DIRTY; |
| |
| xfs_trans_ail_copy_lsn(mp->m_ail, &dqp->q_logitem.qli_flush_lsn, |
| &dqp->q_logitem.qli_item.li_lsn); |
| |
| /* |
| * Attach an iodone routine so that we can remove this dquot from the |
| * AIL and release the flush lock once the dquot is synced to disk. |
| */ |
| xfs_buf_attach_iodone(bp, xfs_qm_dqflush_done, |
| &dqp->q_logitem.qli_item); |
| |
| /* |
| * If the buffer is pinned then push on the log so we won't |
| * get stuck waiting in the write for too long. |
| */ |
| if (xfs_buf_ispinned(bp)) { |
| trace_xfs_dqflush_force(dqp); |
| xfs_log_force(mp, 0); |
| } |
| |
| if (flags & SYNC_WAIT) |
| error = xfs_bwrite(bp); |
| else |
| xfs_buf_delwri_queue(bp); |
| |
| xfs_buf_relse(bp); |
| |
| trace_xfs_dqflush_done(dqp); |
| |
| /* |
| * dqp is still locked, but caller is free to unlock it now. |
| */ |
| return error; |
| |
| } |
| |
| int |
| xfs_qm_dqlock_nowait( |
| xfs_dquot_t *dqp) |
| { |
| return mutex_trylock(&dqp->q_qlock); |
| } |
| |
| void |
| xfs_dqlock( |
| xfs_dquot_t *dqp) |
| { |
| mutex_lock(&dqp->q_qlock); |
| } |
| |
| void |
| xfs_dqunlock( |
| xfs_dquot_t *dqp) |
| { |
| mutex_unlock(&(dqp->q_qlock)); |
| if (dqp->q_logitem.qli_dquot == dqp) { |
| /* Once was dqp->q_mount, but might just have been cleared */ |
| xfs_trans_unlocked_item(dqp->q_logitem.qli_item.li_ailp, |
| (xfs_log_item_t*)&(dqp->q_logitem)); |
| } |
| } |
| |
| |
| void |
| xfs_dqunlock_nonotify( |
| xfs_dquot_t *dqp) |
| { |
| mutex_unlock(&(dqp->q_qlock)); |
| } |
| |
| /* |
| * Lock two xfs_dquot structures. |
| * |
| * To avoid deadlocks we always lock the quota structure with |
| * the lowerd id first. |
| */ |
| void |
| xfs_dqlock2( |
| xfs_dquot_t *d1, |
| xfs_dquot_t *d2) |
| { |
| if (d1 && d2) { |
| ASSERT(d1 != d2); |
| if (be32_to_cpu(d1->q_core.d_id) > |
| be32_to_cpu(d2->q_core.d_id)) { |
| mutex_lock(&d2->q_qlock); |
| mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED); |
| } else { |
| mutex_lock(&d1->q_qlock); |
| mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED); |
| } |
| } else if (d1) { |
| mutex_lock(&d1->q_qlock); |
| } else if (d2) { |
| mutex_lock(&d2->q_qlock); |
| } |
| } |
| |
| |
| /* |
| * Take a dquot out of the mount's dqlist as well as the hashlist. |
| * This is called via unmount as well as quotaoff, and the purge |
| * will always succeed unless there are soft (temp) references |
| * outstanding. |
| * |
| * This returns 0 if it was purged, 1 if it wasn't. It's not an error code |
| * that we're returning! XXXsup - not cool. |
| */ |
| /* ARGSUSED */ |
| int |
| xfs_qm_dqpurge( |
| xfs_dquot_t *dqp) |
| { |
| xfs_dqhash_t *qh = dqp->q_hash; |
| xfs_mount_t *mp = dqp->q_mount; |
| |
| ASSERT(mutex_is_locked(&mp->m_quotainfo->qi_dqlist_lock)); |
| ASSERT(mutex_is_locked(&dqp->q_hash->qh_lock)); |
| |
| xfs_dqlock(dqp); |
| /* |
| * We really can't afford to purge a dquot that is |
| * referenced, because these are hard refs. |
| * It shouldn't happen in general because we went thru _all_ inodes in |
| * dqrele_all_inodes before calling this and didn't let the mountlock go. |
| * However it is possible that we have dquots with temporary |
| * references that are not attached to an inode. e.g. see xfs_setattr(). |
| */ |
| if (dqp->q_nrefs != 0) { |
| xfs_dqunlock(dqp); |
| mutex_unlock(&dqp->q_hash->qh_lock); |
| return (1); |
| } |
| |
| ASSERT(!list_empty(&dqp->q_freelist)); |
| |
| /* |
| * If we're turning off quotas, we have to make sure that, for |
| * example, we don't delete quota disk blocks while dquots are |
| * in the process of getting written to those disk blocks. |
| * This dquot might well be on AIL, and we can't leave it there |
| * if we're turning off quotas. Basically, we need this flush |
| * lock, and are willing to block on it. |
| */ |
| if (!xfs_dqflock_nowait(dqp)) { |
| /* |
| * Block on the flush lock after nudging dquot buffer, |
| * if it is incore. |
| */ |
| xfs_qm_dqflock_pushbuf_wait(dqp); |
| } |
| |
| /* |
| * XXXIf we're turning this type of quotas off, we don't care |
| * about the dirty metadata sitting in this dquot. OTOH, if |
| * we're unmounting, we do care, so we flush it and wait. |
| */ |
| if (XFS_DQ_IS_DIRTY(dqp)) { |
| int error; |
| |
| /* dqflush unlocks dqflock */ |
| /* |
| * Given that dqpurge is a very rare occurrence, it is OK |
| * that we're holding the hashlist and mplist locks |
| * across the disk write. But, ... XXXsup |
| * |
| * We don't care about getting disk errors here. We need |
| * to purge this dquot anyway, so we go ahead regardless. |
| */ |
| error = xfs_qm_dqflush(dqp, SYNC_WAIT); |
| if (error) |
| xfs_warn(mp, "%s: dquot %p flush failed", |
| __func__, dqp); |
| xfs_dqflock(dqp); |
| } |
| ASSERT(atomic_read(&dqp->q_pincount) == 0); |
| ASSERT(XFS_FORCED_SHUTDOWN(mp) || |
| !(dqp->q_logitem.qli_item.li_flags & XFS_LI_IN_AIL)); |
| |
| list_del_init(&dqp->q_hashlist); |
| qh->qh_version++; |
| list_del_init(&dqp->q_mplist); |
| mp->m_quotainfo->qi_dqreclaims++; |
| mp->m_quotainfo->qi_dquots--; |
| /* |
| * XXX Move this to the front of the freelist, if we can get the |
| * freelist lock. |
| */ |
| ASSERT(!list_empty(&dqp->q_freelist)); |
| |
| dqp->q_mount = NULL; |
| dqp->q_hash = NULL; |
| dqp->dq_flags = XFS_DQ_INACTIVE; |
| memset(&dqp->q_core, 0, sizeof(dqp->q_core)); |
| xfs_dqfunlock(dqp); |
| xfs_dqunlock(dqp); |
| mutex_unlock(&qh->qh_lock); |
| return (0); |
| } |
| |
| |
| /* |
| * Give the buffer a little push if it is incore and |
| * wait on the flush lock. |
| */ |
| void |
| xfs_qm_dqflock_pushbuf_wait( |
| xfs_dquot_t *dqp) |
| { |
| xfs_mount_t *mp = dqp->q_mount; |
| xfs_buf_t *bp; |
| |
| /* |
| * Check to see if the dquot has been flushed delayed |
| * write. If so, grab its buffer and send it |
| * out immediately. We'll be able to acquire |
| * the flush lock when the I/O completes. |
| */ |
| bp = xfs_incore(mp->m_ddev_targp, dqp->q_blkno, |
| mp->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK); |
| if (!bp) |
| goto out_lock; |
| |
| if (XFS_BUF_ISDELAYWRITE(bp)) { |
| if (xfs_buf_ispinned(bp)) |
| xfs_log_force(mp, 0); |
| xfs_buf_delwri_promote(bp); |
| wake_up_process(bp->b_target->bt_task); |
| } |
| xfs_buf_relse(bp); |
| out_lock: |
| xfs_dqflock(dqp); |
| } |