| /* |
| * drivers/net/phy/national.c |
| * |
| * Driver for National Semiconductor PHYs |
| * |
| * Author: Stuart Menefy <stuart.menefy@st.com> |
| * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> |
| * |
| * Copyright (c) 2008 STMicroelectronics Limited |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| #include <linux/netdevice.h> |
| |
| /* DP83865 phy identifier values */ |
| #define DP83865_PHY_ID 0x20005c7a |
| |
| #define DP83865_INT_MASK_REG 0x15 |
| #define DP83865_INT_MASK_STATUS 0x14 |
| |
| #define DP83865_INT_REMOTE_FAULT 0x0008 |
| #define DP83865_INT_ANE_COMPLETED 0x0010 |
| #define DP83865_INT_LINK_CHANGE 0xe000 |
| #define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \ |
| DP83865_INT_ANE_COMPLETED | \ |
| DP83865_INT_LINK_CHANGE) |
| |
| /* Advanced proprietary configuration */ |
| #define NS_EXP_MEM_CTL 0x16 |
| #define NS_EXP_MEM_DATA 0x1d |
| #define NS_EXP_MEM_ADD 0x1e |
| |
| #define LED_CTRL_REG 0x13 |
| #define AN_FALLBACK_AN 0x0001 |
| #define AN_FALLBACK_CRC 0x0002 |
| #define AN_FALLBACK_IE 0x0004 |
| #define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE) |
| |
| enum hdx_loopback { |
| hdx_loopback_on = 0, |
| hdx_loopback_off = 1, |
| }; |
| |
| static u8 ns_exp_read(struct phy_device *phydev, u16 reg) |
| { |
| phy_write(phydev, NS_EXP_MEM_ADD, reg); |
| return phy_read(phydev, NS_EXP_MEM_DATA); |
| } |
| |
| static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data) |
| { |
| phy_write(phydev, NS_EXP_MEM_ADD, reg); |
| phy_write(phydev, NS_EXP_MEM_DATA, data); |
| } |
| |
| static int ns_config_intr(struct phy_device *phydev) |
| { |
| int err; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| err = phy_write(phydev, DP83865_INT_MASK_REG, |
| DP83865_INT_MASK_DEFAULT); |
| else |
| err = phy_write(phydev, DP83865_INT_MASK_REG, 0); |
| |
| return err; |
| } |
| |
| static int ns_ack_interrupt(struct phy_device *phydev) |
| { |
| int ret = phy_read(phydev, DP83865_INT_MASK_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) |
| { |
| int bmcr = phy_read(phydev, MII_BMCR); |
| |
| phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); |
| |
| /* Enable 8 bit expended memory read/write (no auto increment) */ |
| phy_write(phydev, NS_EXP_MEM_CTL, 0); |
| phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0); |
| phy_write(phydev, NS_EXP_MEM_DATA, 0x0008); |
| phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); |
| phy_write(phydev, LED_CTRL_REG, mode); |
| return; |
| } |
| |
| static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) |
| { |
| if (disable) |
| ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1); |
| else |
| ns_exp_write(phydev, 0x1c0, |
| ns_exp_read(phydev, 0x1c0) & 0xfffe); |
| |
| printk(KERN_DEBUG "DP83865 PHY: 10BASE-T HDX loopback %s\n", |
| (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on"); |
| |
| return; |
| } |
| |
| static int ns_config_init(struct phy_device *phydev) |
| { |
| ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); |
| /* In the latest MAC or switches design, the 10 Mbps loopback |
| is desired to be turned off. */ |
| ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); |
| return ns_ack_interrupt(phydev); |
| } |
| |
| static struct phy_driver dp83865_driver = { |
| .phy_id = DP83865_PHY_ID, |
| .phy_id_mask = 0xfffffff0, |
| .name = "NatSemi DP83865", |
| .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_init = ns_config_init, |
| .config_aneg = genphy_config_aneg, |
| .read_status = genphy_read_status, |
| .ack_interrupt = ns_ack_interrupt, |
| .config_intr = ns_config_intr, |
| .driver = {.owner = THIS_MODULE,} |
| }; |
| |
| static int __init ns_init(void) |
| { |
| return phy_driver_register(&dp83865_driver); |
| } |
| |
| static void __exit ns_exit(void) |
| { |
| phy_driver_unregister(&dp83865_driver); |
| } |
| |
| MODULE_DESCRIPTION("NatSemi PHY driver"); |
| MODULE_AUTHOR("Stuart Menefy"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(ns_init); |
| module_exit(ns_exit); |
| |
| static struct mdio_device_id ns_tbl[] = { |
| { DP83865_PHY_ID, 0xfffffff0 }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, ns_tbl); |