| /******************************************************************************* |
| |
| Intel 10 Gigabit PCI Express Linux driver |
| Copyright(c) 1999 - 2012 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Contact Information: |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/string.h> |
| #include <linux/in.h> |
| #include <linux/interrupt.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/sctp.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/ipv6.h> |
| #include <linux/slab.h> |
| #include <net/checksum.h> |
| #include <net/ip6_checksum.h> |
| #include <linux/ethtool.h> |
| #include <linux/if.h> |
| #include <linux/if_vlan.h> |
| #include <linux/prefetch.h> |
| #include <scsi/fc/fc_fcoe.h> |
| |
| #include "ixgbe.h" |
| #include "ixgbe_common.h" |
| #include "ixgbe_dcb_82599.h" |
| #include "ixgbe_sriov.h" |
| |
| char ixgbe_driver_name[] = "ixgbe"; |
| static const char ixgbe_driver_string[] = |
| "Intel(R) 10 Gigabit PCI Express Network Driver"; |
| #ifdef IXGBE_FCOE |
| char ixgbe_default_device_descr[] = |
| "Intel(R) 10 Gigabit Network Connection"; |
| #else |
| static char ixgbe_default_device_descr[] = |
| "Intel(R) 10 Gigabit Network Connection"; |
| #endif |
| #define MAJ 3 |
| #define MIN 9 |
| #define BUILD 15 |
| #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ |
| __stringify(BUILD) "-k" |
| const char ixgbe_driver_version[] = DRV_VERSION; |
| static const char ixgbe_copyright[] = |
| "Copyright (c) 1999-2012 Intel Corporation."; |
| |
| static const struct ixgbe_info *ixgbe_info_tbl[] = { |
| [board_82598] = &ixgbe_82598_info, |
| [board_82599] = &ixgbe_82599_info, |
| [board_X540] = &ixgbe_X540_info, |
| }; |
| |
| /* ixgbe_pci_tbl - PCI Device ID Table |
| * |
| * Wildcard entries (PCI_ANY_ID) should come last |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 }, |
| /* required last entry */ |
| {0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); |
| |
| #ifdef CONFIG_IXGBE_DCA |
| static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, |
| void *p); |
| static struct notifier_block dca_notifier = { |
| .notifier_call = ixgbe_notify_dca, |
| .next = NULL, |
| .priority = 0 |
| }; |
| #endif |
| |
| #ifdef CONFIG_PCI_IOV |
| static unsigned int max_vfs; |
| module_param(max_vfs, uint, 0); |
| MODULE_PARM_DESC(max_vfs, |
| "Maximum number of virtual functions to allocate per physical function - default is zero and maximum value is 63"); |
| #endif /* CONFIG_PCI_IOV */ |
| |
| static unsigned int allow_unsupported_sfp; |
| module_param(allow_unsupported_sfp, uint, 0); |
| MODULE_PARM_DESC(allow_unsupported_sfp, |
| "Allow unsupported and untested SFP+ modules on 82599-based adapters"); |
| |
| #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) |
| static int debug = -1; |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
| |
| MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); |
| MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) |
| { |
| if (!test_bit(__IXGBE_DOWN, &adapter->state) && |
| !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state)) |
| schedule_work(&adapter->service_task); |
| } |
| |
| static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter) |
| { |
| BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state)); |
| |
| /* flush memory to make sure state is correct before next watchdog */ |
| smp_mb__before_clear_bit(); |
| clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); |
| } |
| |
| struct ixgbe_reg_info { |
| u32 ofs; |
| char *name; |
| }; |
| |
| static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = { |
| |
| /* General Registers */ |
| {IXGBE_CTRL, "CTRL"}, |
| {IXGBE_STATUS, "STATUS"}, |
| {IXGBE_CTRL_EXT, "CTRL_EXT"}, |
| |
| /* Interrupt Registers */ |
| {IXGBE_EICR, "EICR"}, |
| |
| /* RX Registers */ |
| {IXGBE_SRRCTL(0), "SRRCTL"}, |
| {IXGBE_DCA_RXCTRL(0), "DRXCTL"}, |
| {IXGBE_RDLEN(0), "RDLEN"}, |
| {IXGBE_RDH(0), "RDH"}, |
| {IXGBE_RDT(0), "RDT"}, |
| {IXGBE_RXDCTL(0), "RXDCTL"}, |
| {IXGBE_RDBAL(0), "RDBAL"}, |
| {IXGBE_RDBAH(0), "RDBAH"}, |
| |
| /* TX Registers */ |
| {IXGBE_TDBAL(0), "TDBAL"}, |
| {IXGBE_TDBAH(0), "TDBAH"}, |
| {IXGBE_TDLEN(0), "TDLEN"}, |
| {IXGBE_TDH(0), "TDH"}, |
| {IXGBE_TDT(0), "TDT"}, |
| {IXGBE_TXDCTL(0), "TXDCTL"}, |
| |
| /* List Terminator */ |
| {} |
| }; |
| |
| |
| /* |
| * ixgbe_regdump - register printout routine |
| */ |
| static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo) |
| { |
| int i = 0, j = 0; |
| char rname[16]; |
| u32 regs[64]; |
| |
| switch (reginfo->ofs) { |
| case IXGBE_SRRCTL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); |
| break; |
| case IXGBE_DCA_RXCTRL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); |
| break; |
| case IXGBE_RDLEN(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); |
| break; |
| case IXGBE_RDH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); |
| break; |
| case IXGBE_RDT(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); |
| break; |
| case IXGBE_RXDCTL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); |
| break; |
| case IXGBE_RDBAL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); |
| break; |
| case IXGBE_RDBAH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); |
| break; |
| case IXGBE_TDBAL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); |
| break; |
| case IXGBE_TDBAH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); |
| break; |
| case IXGBE_TDLEN(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); |
| break; |
| case IXGBE_TDH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); |
| break; |
| case IXGBE_TDT(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); |
| break; |
| case IXGBE_TXDCTL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); |
| break; |
| default: |
| pr_info("%-15s %08x\n", reginfo->name, |
| IXGBE_READ_REG(hw, reginfo->ofs)); |
| return; |
| } |
| |
| for (i = 0; i < 8; i++) { |
| snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i*8, i*8+7); |
| pr_err("%-15s", rname); |
| for (j = 0; j < 8; j++) |
| pr_cont(" %08x", regs[i*8+j]); |
| pr_cont("\n"); |
| } |
| |
| } |
| |
| /* |
| * ixgbe_dump - Print registers, tx-rings and rx-rings |
| */ |
| static void ixgbe_dump(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_reg_info *reginfo; |
| int n = 0; |
| struct ixgbe_ring *tx_ring; |
| struct ixgbe_tx_buffer *tx_buffer; |
| union ixgbe_adv_tx_desc *tx_desc; |
| struct my_u0 { u64 a; u64 b; } *u0; |
| struct ixgbe_ring *rx_ring; |
| union ixgbe_adv_rx_desc *rx_desc; |
| struct ixgbe_rx_buffer *rx_buffer_info; |
| u32 staterr; |
| int i = 0; |
| |
| if (!netif_msg_hw(adapter)) |
| return; |
| |
| /* Print netdevice Info */ |
| if (netdev) { |
| dev_info(&adapter->pdev->dev, "Net device Info\n"); |
| pr_info("Device Name state " |
| "trans_start last_rx\n"); |
| pr_info("%-15s %016lX %016lX %016lX\n", |
| netdev->name, |
| netdev->state, |
| netdev->trans_start, |
| netdev->last_rx); |
| } |
| |
| /* Print Registers */ |
| dev_info(&adapter->pdev->dev, "Register Dump\n"); |
| pr_info(" Register Name Value\n"); |
| for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl; |
| reginfo->name; reginfo++) { |
| ixgbe_regdump(hw, reginfo); |
| } |
| |
| /* Print TX Ring Summary */ |
| if (!netdev || !netif_running(netdev)) |
| goto exit; |
| |
| dev_info(&adapter->pdev->dev, "TX Rings Summary\n"); |
| pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n"); |
| for (n = 0; n < adapter->num_tx_queues; n++) { |
| tx_ring = adapter->tx_ring[n]; |
| tx_buffer = &tx_ring->tx_buffer_info[tx_ring->next_to_clean]; |
| pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n", |
| n, tx_ring->next_to_use, tx_ring->next_to_clean, |
| (u64)dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| tx_buffer->next_to_watch, |
| (u64)tx_buffer->time_stamp); |
| } |
| |
| /* Print TX Rings */ |
| if (!netif_msg_tx_done(adapter)) |
| goto rx_ring_summary; |
| |
| dev_info(&adapter->pdev->dev, "TX Rings Dump\n"); |
| |
| /* Transmit Descriptor Formats |
| * |
| * Advanced Transmit Descriptor |
| * +--------------------------------------------------------------+ |
| * 0 | Buffer Address [63:0] | |
| * +--------------------------------------------------------------+ |
| * 8 | PAYLEN | PORTS | IDX | STA | DCMD |DTYP | RSV | DTALEN | |
| * +--------------------------------------------------------------+ |
| * 63 46 45 40 39 36 35 32 31 24 23 20 19 0 |
| */ |
| |
| for (n = 0; n < adapter->num_tx_queues; n++) { |
| tx_ring = adapter->tx_ring[n]; |
| pr_info("------------------------------------\n"); |
| pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index); |
| pr_info("------------------------------------\n"); |
| pr_info("T [desc] [address 63:0 ] " |
| "[PlPOIdStDDt Ln] [bi->dma ] " |
| "leng ntw timestamp bi->skb\n"); |
| |
| for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| u0 = (struct my_u0 *)tx_desc; |
| pr_info("T [0x%03X] %016llX %016llX %016llX" |
| " %04X %p %016llX %p", i, |
| le64_to_cpu(u0->a), |
| le64_to_cpu(u0->b), |
| (u64)dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| tx_buffer->next_to_watch, |
| (u64)tx_buffer->time_stamp, |
| tx_buffer->skb); |
| if (i == tx_ring->next_to_use && |
| i == tx_ring->next_to_clean) |
| pr_cont(" NTC/U\n"); |
| else if (i == tx_ring->next_to_use) |
| pr_cont(" NTU\n"); |
| else if (i == tx_ring->next_to_clean) |
| pr_cont(" NTC\n"); |
| else |
| pr_cont("\n"); |
| |
| if (netif_msg_pktdata(adapter) && |
| dma_unmap_len(tx_buffer, len) != 0) |
| print_hex_dump(KERN_INFO, "", |
| DUMP_PREFIX_ADDRESS, 16, 1, |
| phys_to_virt(dma_unmap_addr(tx_buffer, |
| dma)), |
| dma_unmap_len(tx_buffer, len), |
| true); |
| } |
| } |
| |
| /* Print RX Rings Summary */ |
| rx_ring_summary: |
| dev_info(&adapter->pdev->dev, "RX Rings Summary\n"); |
| pr_info("Queue [NTU] [NTC]\n"); |
| for (n = 0; n < adapter->num_rx_queues; n++) { |
| rx_ring = adapter->rx_ring[n]; |
| pr_info("%5d %5X %5X\n", |
| n, rx_ring->next_to_use, rx_ring->next_to_clean); |
| } |
| |
| /* Print RX Rings */ |
| if (!netif_msg_rx_status(adapter)) |
| goto exit; |
| |
| dev_info(&adapter->pdev->dev, "RX Rings Dump\n"); |
| |
| /* Advanced Receive Descriptor (Read) Format |
| * 63 1 0 |
| * +-----------------------------------------------------+ |
| * 0 | Packet Buffer Address [63:1] |A0/NSE| |
| * +----------------------------------------------+------+ |
| * 8 | Header Buffer Address [63:1] | DD | |
| * +-----------------------------------------------------+ |
| * |
| * |
| * Advanced Receive Descriptor (Write-Back) Format |
| * |
| * 63 48 47 32 31 30 21 20 16 15 4 3 0 |
| * +------------------------------------------------------+ |
| * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS | |
| * | Checksum Ident | | | | Type | Type | |
| * +------------------------------------------------------+ |
| * 8 | VLAN Tag | Length | Extended Error | Extended Status | |
| * +------------------------------------------------------+ |
| * 63 48 47 32 31 20 19 0 |
| */ |
| for (n = 0; n < adapter->num_rx_queues; n++) { |
| rx_ring = adapter->rx_ring[n]; |
| pr_info("------------------------------------\n"); |
| pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index); |
| pr_info("------------------------------------\n"); |
| pr_info("R [desc] [ PktBuf A0] " |
| "[ HeadBuf DD] [bi->dma ] [bi->skb] " |
| "<-- Adv Rx Read format\n"); |
| pr_info("RWB[desc] [PcsmIpSHl PtRs] " |
| "[vl er S cks ln] ---------------- [bi->skb] " |
| "<-- Adv Rx Write-Back format\n"); |
| |
| for (i = 0; i < rx_ring->count; i++) { |
| rx_buffer_info = &rx_ring->rx_buffer_info[i]; |
| rx_desc = IXGBE_RX_DESC(rx_ring, i); |
| u0 = (struct my_u0 *)rx_desc; |
| staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
| if (staterr & IXGBE_RXD_STAT_DD) { |
| /* Descriptor Done */ |
| pr_info("RWB[0x%03X] %016llX " |
| "%016llX ---------------- %p", i, |
| le64_to_cpu(u0->a), |
| le64_to_cpu(u0->b), |
| rx_buffer_info->skb); |
| } else { |
| pr_info("R [0x%03X] %016llX " |
| "%016llX %016llX %p", i, |
| le64_to_cpu(u0->a), |
| le64_to_cpu(u0->b), |
| (u64)rx_buffer_info->dma, |
| rx_buffer_info->skb); |
| |
| if (netif_msg_pktdata(adapter)) { |
| print_hex_dump(KERN_INFO, "", |
| DUMP_PREFIX_ADDRESS, 16, 1, |
| phys_to_virt(rx_buffer_info->dma), |
| ixgbe_rx_bufsz(rx_ring), true); |
| } |
| } |
| |
| if (i == rx_ring->next_to_use) |
| pr_cont(" NTU\n"); |
| else if (i == rx_ring->next_to_clean) |
| pr_cont(" NTC\n"); |
| else |
| pr_cont("\n"); |
| |
| } |
| } |
| |
| exit: |
| return; |
| } |
| |
| static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter) |
| { |
| u32 ctrl_ext; |
| |
| /* Let firmware take over control of h/w */ |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, |
| ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); |
| } |
| |
| static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) |
| { |
| u32 ctrl_ext; |
| |
| /* Let firmware know the driver has taken over */ |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, |
| ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); |
| } |
| |
| /* |
| * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors |
| * @adapter: pointer to adapter struct |
| * @direction: 0 for Rx, 1 for Tx, -1 for other causes |
| * @queue: queue to map the corresponding interrupt to |
| * @msix_vector: the vector to map to the corresponding queue |
| * |
| */ |
| static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction, |
| u8 queue, u8 msix_vector) |
| { |
| u32 ivar, index; |
| struct ixgbe_hw *hw = &adapter->hw; |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; |
| if (direction == -1) |
| direction = 0; |
| index = (((direction * 64) + queue) >> 2) & 0x1F; |
| ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index)); |
| ivar &= ~(0xFF << (8 * (queue & 0x3))); |
| ivar |= (msix_vector << (8 * (queue & 0x3))); |
| IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| if (direction == -1) { |
| /* other causes */ |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; |
| index = ((queue & 1) * 8); |
| ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC); |
| ivar &= ~(0xFF << index); |
| ivar |= (msix_vector << index); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar); |
| break; |
| } else { |
| /* tx or rx causes */ |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; |
| index = ((16 * (queue & 1)) + (8 * direction)); |
| ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1)); |
| ivar &= ~(0xFF << index); |
| ivar |= (msix_vector << index); |
| IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar); |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| |
| static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter, |
| u64 qmask) |
| { |
| u32 mask; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| mask = (qmask & 0xFFFFFFFF); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask); |
| mask = (qmask >> 32); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *ring, |
| struct ixgbe_tx_buffer *tx_buffer) |
| { |
| if (tx_buffer->skb) { |
| dev_kfree_skb_any(tx_buffer->skb); |
| if (dma_unmap_len(tx_buffer, len)) |
| dma_unmap_single(ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| } else if (dma_unmap_len(tx_buffer, len)) { |
| dma_unmap_page(ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| } |
| tx_buffer->next_to_watch = NULL; |
| tx_buffer->skb = NULL; |
| dma_unmap_len_set(tx_buffer, len, 0); |
| /* tx_buffer must be completely set up in the transmit path */ |
| } |
| |
| static void ixgbe_update_xoff_rx_lfc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; |
| int i; |
| u32 data; |
| |
| if ((hw->fc.current_mode != ixgbe_fc_full) && |
| (hw->fc.current_mode != ixgbe_fc_rx_pause)) |
| return; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); |
| break; |
| default: |
| data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); |
| } |
| hwstats->lxoffrxc += data; |
| |
| /* refill credits (no tx hang) if we received xoff */ |
| if (!data) |
| return; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, |
| &adapter->tx_ring[i]->state); |
| } |
| |
| static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; |
| u32 xoff[8] = {0}; |
| int i; |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; |
| |
| if (adapter->ixgbe_ieee_pfc) |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED) || !pfc_en) { |
| ixgbe_update_xoff_rx_lfc(adapter); |
| return; |
| } |
| |
| /* update stats for each tc, only valid with PFC enabled */ |
| for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); |
| break; |
| default: |
| xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); |
| } |
| hwstats->pxoffrxc[i] += xoff[i]; |
| } |
| |
| /* disarm tx queues that have received xoff frames */ |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; |
| u8 tc = tx_ring->dcb_tc; |
| |
| if (xoff[tc]) |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); |
| } |
| } |
| |
| static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring) |
| { |
| return ring->stats.packets; |
| } |
| |
| static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(ring->netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| u32 head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx)); |
| u32 tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx)); |
| |
| if (head != tail) |
| return (head < tail) ? |
| tail - head : (tail + ring->count - head); |
| |
| return 0; |
| } |
| |
| static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring) |
| { |
| u32 tx_done = ixgbe_get_tx_completed(tx_ring); |
| u32 tx_done_old = tx_ring->tx_stats.tx_done_old; |
| u32 tx_pending = ixgbe_get_tx_pending(tx_ring); |
| bool ret = false; |
| |
| clear_check_for_tx_hang(tx_ring); |
| |
| /* |
| * Check for a hung queue, but be thorough. This verifies |
| * that a transmit has been completed since the previous |
| * check AND there is at least one packet pending. The |
| * ARMED bit is set to indicate a potential hang. The |
| * bit is cleared if a pause frame is received to remove |
| * false hang detection due to PFC or 802.3x frames. By |
| * requiring this to fail twice we avoid races with |
| * pfc clearing the ARMED bit and conditions where we |
| * run the check_tx_hang logic with a transmit completion |
| * pending but without time to complete it yet. |
| */ |
| if ((tx_done_old == tx_done) && tx_pending) { |
| /* make sure it is true for two checks in a row */ |
| ret = test_and_set_bit(__IXGBE_HANG_CHECK_ARMED, |
| &tx_ring->state); |
| } else { |
| /* update completed stats and continue */ |
| tx_ring->tx_stats.tx_done_old = tx_done; |
| /* reset the countdown */ |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout |
| * @adapter: driver private struct |
| **/ |
| static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter) |
| { |
| |
| /* Do the reset outside of interrupt context */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| |
| /** |
| * ixgbe_clean_tx_irq - Reclaim resources after transmit completes |
| * @q_vector: structure containing interrupt and ring information |
| * @tx_ring: tx ring to clean |
| **/ |
| static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, |
| struct ixgbe_ring *tx_ring) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_tx_buffer *tx_buffer; |
| union ixgbe_adv_tx_desc *tx_desc; |
| unsigned int total_bytes = 0, total_packets = 0; |
| unsigned int budget = q_vector->tx.work_limit; |
| unsigned int i = tx_ring->next_to_clean; |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return true; |
| |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); |
| i -= tx_ring->count; |
| |
| do { |
| union ixgbe_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; |
| |
| /* if next_to_watch is not set then there is no work pending */ |
| if (!eop_desc) |
| break; |
| |
| /* prevent any other reads prior to eop_desc */ |
| rmb(); |
| |
| /* if DD is not set pending work has not been completed */ |
| if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) |
| break; |
| |
| /* clear next_to_watch to prevent false hangs */ |
| tx_buffer->next_to_watch = NULL; |
| |
| /* update the statistics for this packet */ |
| total_bytes += tx_buffer->bytecount; |
| total_packets += tx_buffer->gso_segs; |
| |
| #ifdef CONFIG_IXGBE_PTP |
| if (unlikely(tx_buffer->tx_flags & |
| IXGBE_TX_FLAGS_TSTAMP)) |
| ixgbe_ptp_tx_hwtstamp(q_vector, |
| tx_buffer->skb); |
| |
| #endif |
| /* free the skb */ |
| dev_kfree_skb_any(tx_buffer->skb); |
| |
| /* unmap skb header data */ |
| dma_unmap_single(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| |
| /* clear tx_buffer data */ |
| tx_buffer->skb = NULL; |
| dma_unmap_len_set(tx_buffer, len, 0); |
| |
| /* unmap remaining buffers */ |
| while (tx_desc != eop_desc) { |
| tx_buffer++; |
| tx_desc++; |
| i++; |
| if (unlikely(!i)) { |
| i -= tx_ring->count; |
| tx_buffer = tx_ring->tx_buffer_info; |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| } |
| |
| /* unmap any remaining paged data */ |
| if (dma_unmap_len(tx_buffer, len)) { |
| dma_unmap_page(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| dma_unmap_len_set(tx_buffer, len, 0); |
| } |
| } |
| |
| /* move us one more past the eop_desc for start of next pkt */ |
| tx_buffer++; |
| tx_desc++; |
| i++; |
| if (unlikely(!i)) { |
| i -= tx_ring->count; |
| tx_buffer = tx_ring->tx_buffer_info; |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| } |
| |
| /* issue prefetch for next Tx descriptor */ |
| prefetch(tx_desc); |
| |
| /* update budget accounting */ |
| budget--; |
| } while (likely(budget)); |
| |
| i += tx_ring->count; |
| tx_ring->next_to_clean = i; |
| u64_stats_update_begin(&tx_ring->syncp); |
| tx_ring->stats.bytes += total_bytes; |
| tx_ring->stats.packets += total_packets; |
| u64_stats_update_end(&tx_ring->syncp); |
| q_vector->tx.total_bytes += total_bytes; |
| q_vector->tx.total_packets += total_packets; |
| |
| if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) { |
| /* schedule immediate reset if we believe we hung */ |
| struct ixgbe_hw *hw = &adapter->hw; |
| e_err(drv, "Detected Tx Unit Hang\n" |
| " Tx Queue <%d>\n" |
| " TDH, TDT <%x>, <%x>\n" |
| " next_to_use <%x>\n" |
| " next_to_clean <%x>\n" |
| "tx_buffer_info[next_to_clean]\n" |
| " time_stamp <%lx>\n" |
| " jiffies <%lx>\n", |
| tx_ring->queue_index, |
| IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)), |
| IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)), |
| tx_ring->next_to_use, i, |
| tx_ring->tx_buffer_info[i].time_stamp, jiffies); |
| |
| netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); |
| |
| e_info(probe, |
| "tx hang %d detected on queue %d, resetting adapter\n", |
| adapter->tx_timeout_count + 1, tx_ring->queue_index); |
| |
| /* schedule immediate reset if we believe we hung */ |
| ixgbe_tx_timeout_reset(adapter); |
| |
| /* the adapter is about to reset, no point in enabling stuff */ |
| return true; |
| } |
| |
| netdev_tx_completed_queue(txring_txq(tx_ring), |
| total_packets, total_bytes); |
| |
| #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) |
| if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && |
| (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) { |
| /* Make sure that anybody stopping the queue after this |
| * sees the new next_to_clean. |
| */ |
| smp_mb(); |
| if (__netif_subqueue_stopped(tx_ring->netdev, |
| tx_ring->queue_index) |
| && !test_bit(__IXGBE_DOWN, &adapter->state)) { |
| netif_wake_subqueue(tx_ring->netdev, |
| tx_ring->queue_index); |
| ++tx_ring->tx_stats.restart_queue; |
| } |
| } |
| |
| return !!budget; |
| } |
| |
| #ifdef CONFIG_IXGBE_DCA |
| static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, |
| int cpu) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); |
| u16 reg_offset; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| reg_offset = IXGBE_DCA_TXCTRL(tx_ring->reg_idx); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| reg_offset = IXGBE_DCA_TXCTRL_82599(tx_ring->reg_idx); |
| txctrl <<= IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599; |
| break; |
| default: |
| /* for unknown hardware do not write register */ |
| return; |
| } |
| |
| /* |
| * We can enable relaxed ordering for reads, but not writes when |
| * DCA is enabled. This is due to a known issue in some chipsets |
| * which will cause the DCA tag to be cleared. |
| */ |
| txctrl |= IXGBE_DCA_TXCTRL_DESC_RRO_EN | |
| IXGBE_DCA_TXCTRL_DATA_RRO_EN | |
| IXGBE_DCA_TXCTRL_DESC_DCA_EN; |
| |
| IXGBE_WRITE_REG(hw, reg_offset, txctrl); |
| } |
| |
| static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring, |
| int cpu) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rxctrl = dca3_get_tag(rx_ring->dev, cpu); |
| u8 reg_idx = rx_ring->reg_idx; |
| |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| rxctrl <<= IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599; |
| break; |
| default: |
| break; |
| } |
| |
| /* |
| * We can enable relaxed ordering for reads, but not writes when |
| * DCA is enabled. This is due to a known issue in some chipsets |
| * which will cause the DCA tag to be cleared. |
| */ |
| rxctrl |= IXGBE_DCA_RXCTRL_DESC_RRO_EN | |
| IXGBE_DCA_RXCTRL_DATA_DCA_EN | |
| IXGBE_DCA_RXCTRL_DESC_DCA_EN; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl); |
| } |
| |
| static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *ring; |
| int cpu = get_cpu(); |
| |
| if (q_vector->cpu == cpu) |
| goto out_no_update; |
| |
| ixgbe_for_each_ring(ring, q_vector->tx) |
| ixgbe_update_tx_dca(adapter, ring, cpu); |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) |
| ixgbe_update_rx_dca(adapter, ring, cpu); |
| |
| q_vector->cpu = cpu; |
| out_no_update: |
| put_cpu(); |
| } |
| |
| static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) |
| { |
| int num_q_vectors; |
| int i; |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED)) |
| return; |
| |
| /* always use CB2 mode, difference is masked in the CB driver */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) |
| num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| else |
| num_q_vectors = 1; |
| |
| for (i = 0; i < num_q_vectors; i++) { |
| adapter->q_vector[i]->cpu = -1; |
| ixgbe_update_dca(adapter->q_vector[i]); |
| } |
| } |
| |
| static int __ixgbe_notify_dca(struct device *dev, void *data) |
| { |
| struct ixgbe_adapter *adapter = dev_get_drvdata(dev); |
| unsigned long event = *(unsigned long *)data; |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE)) |
| return 0; |
| |
| switch (event) { |
| case DCA_PROVIDER_ADD: |
| /* if we're already enabled, don't do it again */ |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| break; |
| if (dca_add_requester(dev) == 0) { |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; |
| ixgbe_setup_dca(adapter); |
| break; |
| } |
| /* Fall Through since DCA is disabled. */ |
| case DCA_PROVIDER_REMOVE: |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |
| dca_remove_requester(dev); |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_IXGBE_DCA */ |
| static inline void ixgbe_rx_hash(struct ixgbe_ring *ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| if (ring->netdev->features & NETIF_F_RXHASH) |
| skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss); |
| } |
| |
| #ifdef IXGBE_FCOE |
| /** |
| * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type |
| * @ring: structure containing ring specific data |
| * @rx_desc: advanced rx descriptor |
| * |
| * Returns : true if it is FCoE pkt |
| */ |
| static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring, |
| union ixgbe_adv_rx_desc *rx_desc) |
| { |
| __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; |
| |
| return test_bit(__IXGBE_RX_FCOE, &ring->state) && |
| ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) == |
| (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE << |
| IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT))); |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| /** |
| * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum |
| * @ring: structure containing ring specific data |
| * @rx_desc: current Rx descriptor being processed |
| * @skb: skb currently being received and modified |
| **/ |
| static inline void ixgbe_rx_checksum(struct ixgbe_ring *ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| skb_checksum_none_assert(skb); |
| |
| /* Rx csum disabled */ |
| if (!(ring->netdev->features & NETIF_F_RXCSUM)) |
| return; |
| |
| /* if IP and error */ |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_IPCS) && |
| ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_IPE)) { |
| ring->rx_stats.csum_err++; |
| return; |
| } |
| |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_L4CS)) |
| return; |
| |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_TCPE)) { |
| __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; |
| |
| /* |
| * 82599 errata, UDP frames with a 0 checksum can be marked as |
| * checksum errors. |
| */ |
| if ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_UDP)) && |
| test_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state)) |
| return; |
| |
| ring->rx_stats.csum_err++; |
| return; |
| } |
| |
| /* It must be a TCP or UDP packet with a valid checksum */ |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| } |
| |
| static inline void ixgbe_release_rx_desc(struct ixgbe_ring *rx_ring, u32 val) |
| { |
| rx_ring->next_to_use = val; |
| |
| /* update next to alloc since we have filled the ring */ |
| rx_ring->next_to_alloc = val; |
| /* |
| * Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| writel(val, rx_ring->tail); |
| } |
| |
| static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring, |
| struct ixgbe_rx_buffer *bi) |
| { |
| struct page *page = bi->page; |
| dma_addr_t dma = bi->dma; |
| |
| /* since we are recycling buffers we should seldom need to alloc */ |
| if (likely(dma)) |
| return true; |
| |
| /* alloc new page for storage */ |
| if (likely(!page)) { |
| page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP, |
| ixgbe_rx_pg_order(rx_ring)); |
| if (unlikely(!page)) { |
| rx_ring->rx_stats.alloc_rx_page_failed++; |
| return false; |
| } |
| bi->page = page; |
| } |
| |
| /* map page for use */ |
| dma = dma_map_page(rx_ring->dev, page, 0, |
| ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE); |
| |
| /* |
| * if mapping failed free memory back to system since |
| * there isn't much point in holding memory we can't use |
| */ |
| if (dma_mapping_error(rx_ring->dev, dma)) { |
| __free_pages(page, ixgbe_rx_pg_order(rx_ring)); |
| bi->page = NULL; |
| |
| rx_ring->rx_stats.alloc_rx_page_failed++; |
| return false; |
| } |
| |
| bi->dma = dma; |
| bi->page_offset ^= ixgbe_rx_bufsz(rx_ring); |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_alloc_rx_buffers - Replace used receive buffers |
| * @rx_ring: ring to place buffers on |
| * @cleaned_count: number of buffers to replace |
| **/ |
| void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count) |
| { |
| union ixgbe_adv_rx_desc *rx_desc; |
| struct ixgbe_rx_buffer *bi; |
| u16 i = rx_ring->next_to_use; |
| |
| /* nothing to do */ |
| if (!cleaned_count) |
| return; |
| |
| rx_desc = IXGBE_RX_DESC(rx_ring, i); |
| bi = &rx_ring->rx_buffer_info[i]; |
| i -= rx_ring->count; |
| |
| do { |
| if (!ixgbe_alloc_mapped_page(rx_ring, bi)) |
| break; |
| |
| /* |
| * Refresh the desc even if buffer_addrs didn't change |
| * because each write-back erases this info. |
| */ |
| rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); |
| |
| rx_desc++; |
| bi++; |
| i++; |
| if (unlikely(!i)) { |
| rx_desc = IXGBE_RX_DESC(rx_ring, 0); |
| bi = rx_ring->rx_buffer_info; |
| i -= rx_ring->count; |
| } |
| |
| /* clear the hdr_addr for the next_to_use descriptor */ |
| rx_desc->read.hdr_addr = 0; |
| |
| cleaned_count--; |
| } while (cleaned_count); |
| |
| i += rx_ring->count; |
| |
| if (rx_ring->next_to_use != i) |
| ixgbe_release_rx_desc(rx_ring, i); |
| } |
| |
| /** |
| * ixgbe_get_headlen - determine size of header for RSC/LRO/GRO/FCOE |
| * @data: pointer to the start of the headers |
| * @max_len: total length of section to find headers in |
| * |
| * This function is meant to determine the length of headers that will |
| * be recognized by hardware for LRO, GRO, and RSC offloads. The main |
| * motivation of doing this is to only perform one pull for IPv4 TCP |
| * packets so that we can do basic things like calculating the gso_size |
| * based on the average data per packet. |
| **/ |
| static unsigned int ixgbe_get_headlen(unsigned char *data, |
| unsigned int max_len) |
| { |
| union { |
| unsigned char *network; |
| /* l2 headers */ |
| struct ethhdr *eth; |
| struct vlan_hdr *vlan; |
| /* l3 headers */ |
| struct iphdr *ipv4; |
| } hdr; |
| __be16 protocol; |
| u8 nexthdr = 0; /* default to not TCP */ |
| u8 hlen; |
| |
| /* this should never happen, but better safe than sorry */ |
| if (max_len < ETH_HLEN) |
| return max_len; |
| |
| /* initialize network frame pointer */ |
| hdr.network = data; |
| |
| /* set first protocol and move network header forward */ |
| protocol = hdr.eth->h_proto; |
| hdr.network += ETH_HLEN; |
| |
| /* handle any vlan tag if present */ |
| if (protocol == __constant_htons(ETH_P_8021Q)) { |
| if ((hdr.network - data) > (max_len - VLAN_HLEN)) |
| return max_len; |
| |
| protocol = hdr.vlan->h_vlan_encapsulated_proto; |
| hdr.network += VLAN_HLEN; |
| } |
| |
| /* handle L3 protocols */ |
| if (protocol == __constant_htons(ETH_P_IP)) { |
| if ((hdr.network - data) > (max_len - sizeof(struct iphdr))) |
| return max_len; |
| |
| /* access ihl as a u8 to avoid unaligned access on ia64 */ |
| hlen = (hdr.network[0] & 0x0F) << 2; |
| |
| /* verify hlen meets minimum size requirements */ |
| if (hlen < sizeof(struct iphdr)) |
| return hdr.network - data; |
| |
| /* record next protocol */ |
| nexthdr = hdr.ipv4->protocol; |
| hdr.network += hlen; |
| #ifdef IXGBE_FCOE |
| } else if (protocol == __constant_htons(ETH_P_FCOE)) { |
| if ((hdr.network - data) > (max_len - FCOE_HEADER_LEN)) |
| return max_len; |
| hdr.network += FCOE_HEADER_LEN; |
| #endif |
| } else { |
| return hdr.network - data; |
| } |
| |
| /* finally sort out TCP */ |
| if (nexthdr == IPPROTO_TCP) { |
| if ((hdr.network - data) > (max_len - sizeof(struct tcphdr))) |
| return max_len; |
| |
| /* access doff as a u8 to avoid unaligned access on ia64 */ |
| hlen = (hdr.network[12] & 0xF0) >> 2; |
| |
| /* verify hlen meets minimum size requirements */ |
| if (hlen < sizeof(struct tcphdr)) |
| return hdr.network - data; |
| |
| hdr.network += hlen; |
| } |
| |
| /* |
| * If everything has gone correctly hdr.network should be the |
| * data section of the packet and will be the end of the header. |
| * If not then it probably represents the end of the last recognized |
| * header. |
| */ |
| if ((hdr.network - data) < max_len) |
| return hdr.network - data; |
| else |
| return max_len; |
| } |
| |
| static void ixgbe_get_rsc_cnt(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| __le32 rsc_enabled; |
| u32 rsc_cnt; |
| |
| if (!ring_is_rsc_enabled(rx_ring)) |
| return; |
| |
| rsc_enabled = rx_desc->wb.lower.lo_dword.data & |
| cpu_to_le32(IXGBE_RXDADV_RSCCNT_MASK); |
| |
| /* If this is an RSC frame rsc_cnt should be non-zero */ |
| if (!rsc_enabled) |
| return; |
| |
| rsc_cnt = le32_to_cpu(rsc_enabled); |
| rsc_cnt >>= IXGBE_RXDADV_RSCCNT_SHIFT; |
| |
| IXGBE_CB(skb)->append_cnt += rsc_cnt - 1; |
| } |
| |
| static void ixgbe_set_rsc_gso_size(struct ixgbe_ring *ring, |
| struct sk_buff *skb) |
| { |
| u16 hdr_len = skb_headlen(skb); |
| |
| /* set gso_size to avoid messing up TCP MSS */ |
| skb_shinfo(skb)->gso_size = DIV_ROUND_UP((skb->len - hdr_len), |
| IXGBE_CB(skb)->append_cnt); |
| } |
| |
| static void ixgbe_update_rsc_stats(struct ixgbe_ring *rx_ring, |
| struct sk_buff *skb) |
| { |
| /* if append_cnt is 0 then frame is not RSC */ |
| if (!IXGBE_CB(skb)->append_cnt) |
| return; |
| |
| rx_ring->rx_stats.rsc_count += IXGBE_CB(skb)->append_cnt; |
| rx_ring->rx_stats.rsc_flush++; |
| |
| ixgbe_set_rsc_gso_size(rx_ring, skb); |
| |
| /* gso_size is computed using append_cnt so always clear it last */ |
| IXGBE_CB(skb)->append_cnt = 0; |
| } |
| |
| /** |
| * ixgbe_process_skb_fields - Populate skb header fields from Rx descriptor |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @rx_desc: pointer to the EOP Rx descriptor |
| * @skb: pointer to current skb being populated |
| * |
| * This function checks the ring, descriptor, and packet information in |
| * order to populate the hash, checksum, VLAN, timestamp, protocol, and |
| * other fields within the skb. |
| **/ |
| static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| struct net_device *dev = rx_ring->netdev; |
| |
| ixgbe_update_rsc_stats(rx_ring, skb); |
| |
| ixgbe_rx_hash(rx_ring, rx_desc, skb); |
| |
| ixgbe_rx_checksum(rx_ring, rx_desc, skb); |
| |
| #ifdef CONFIG_IXGBE_PTP |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS)) |
| ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb); |
| #endif |
| |
| if ((dev->features & NETIF_F_HW_VLAN_RX) && |
| ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { |
| u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan); |
| __vlan_hwaccel_put_tag(skb, vid); |
| } |
| |
| skb_record_rx_queue(skb, rx_ring->queue_index); |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| } |
| |
| static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector, |
| struct sk_buff *skb) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| |
| if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) |
| napi_gro_receive(&q_vector->napi, skb); |
| else |
| netif_rx(skb); |
| } |
| |
| /** |
| * ixgbe_is_non_eop - process handling of non-EOP buffers |
| * @rx_ring: Rx ring being processed |
| * @rx_desc: Rx descriptor for current buffer |
| * @skb: Current socket buffer containing buffer in progress |
| * |
| * This function updates next to clean. If the buffer is an EOP buffer |
| * this function exits returning false, otherwise it will place the |
| * sk_buff in the next buffer to be chained and return true indicating |
| * that this is in fact a non-EOP buffer. |
| **/ |
| static bool ixgbe_is_non_eop(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| u32 ntc = rx_ring->next_to_clean + 1; |
| |
| /* fetch, update, and store next to clean */ |
| ntc = (ntc < rx_ring->count) ? ntc : 0; |
| rx_ring->next_to_clean = ntc; |
| |
| prefetch(IXGBE_RX_DESC(rx_ring, ntc)); |
| |
| if (likely(ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP))) |
| return false; |
| |
| /* append_cnt indicates packet is RSC, if so fetch nextp */ |
| if (IXGBE_CB(skb)->append_cnt) { |
| ntc = le32_to_cpu(rx_desc->wb.upper.status_error); |
| ntc &= IXGBE_RXDADV_NEXTP_MASK; |
| ntc >>= IXGBE_RXDADV_NEXTP_SHIFT; |
| } |
| |
| /* place skb in next buffer to be received */ |
| rx_ring->rx_buffer_info[ntc].skb = skb; |
| rx_ring->rx_stats.non_eop_descs++; |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_cleanup_headers - Correct corrupted or empty headers |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @rx_desc: pointer to the EOP Rx descriptor |
| * @skb: pointer to current skb being fixed |
| * |
| * Check for corrupted packet headers caused by senders on the local L2 |
| * embedded NIC switch not setting up their Tx Descriptors right. These |
| * should be very rare. |
| * |
| * Also address the case where we are pulling data in on pages only |
| * and as such no data is present in the skb header. |
| * |
| * In addition if skb is not at least 60 bytes we need to pad it so that |
| * it is large enough to qualify as a valid Ethernet frame. |
| * |
| * Returns true if an error was encountered and skb was freed. |
| **/ |
| static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; |
| struct net_device *netdev = rx_ring->netdev; |
| unsigned char *va; |
| unsigned int pull_len; |
| |
| /* if the page was released unmap it, else just sync our portion */ |
| if (unlikely(IXGBE_CB(skb)->page_released)) { |
| dma_unmap_page(rx_ring->dev, IXGBE_CB(skb)->dma, |
| ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE); |
| IXGBE_CB(skb)->page_released = false; |
| } else { |
| dma_sync_single_range_for_cpu(rx_ring->dev, |
| IXGBE_CB(skb)->dma, |
| frag->page_offset, |
| ixgbe_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| } |
| IXGBE_CB(skb)->dma = 0; |
| |
| /* verify that the packet does not have any known errors */ |
| if (unlikely(ixgbe_test_staterr(rx_desc, |
| IXGBE_RXDADV_ERR_FRAME_ERR_MASK) && |
| !(netdev->features & NETIF_F_RXALL))) { |
| dev_kfree_skb_any(skb); |
| return true; |
| } |
| |
| /* |
| * it is valid to use page_address instead of kmap since we are |
| * working with pages allocated out of the lomem pool per |
| * alloc_page(GFP_ATOMIC) |
| */ |
| va = skb_frag_address(frag); |
| |
| /* |
| * we need the header to contain the greater of either ETH_HLEN or |
| * 60 bytes if the skb->len is less than 60 for skb_pad. |
| */ |
| pull_len = skb_frag_size(frag); |
| if (pull_len > 256) |
| pull_len = ixgbe_get_headlen(va, pull_len); |
| |
| /* align pull length to size of long to optimize memcpy performance */ |
| skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); |
| |
| /* update all of the pointers */ |
| skb_frag_size_sub(frag, pull_len); |
| frag->page_offset += pull_len; |
| skb->data_len -= pull_len; |
| skb->tail += pull_len; |
| |
| /* |
| * if we sucked the frag empty then we should free it, |
| * if there are other frags here something is screwed up in hardware |
| */ |
| if (skb_frag_size(frag) == 0) { |
| BUG_ON(skb_shinfo(skb)->nr_frags != 1); |
| skb_shinfo(skb)->nr_frags = 0; |
| __skb_frag_unref(frag); |
| skb->truesize -= ixgbe_rx_bufsz(rx_ring); |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* do not attempt to pad FCoE Frames as this will disrupt DDP */ |
| if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) |
| return false; |
| |
| #endif |
| /* if skb_pad returns an error the skb was freed */ |
| if (unlikely(skb->len < 60)) { |
| int pad_len = 60 - skb->len; |
| |
| if (skb_pad(skb, pad_len)) |
| return true; |
| __skb_put(skb, pad_len); |
| } |
| |
| return false; |
| } |
| |
| /** |
| * ixgbe_can_reuse_page - determine if we can reuse a page |
| * @rx_buffer: pointer to rx_buffer containing the page we want to reuse |
| * |
| * Returns true if page can be reused in another Rx buffer |
| **/ |
| static inline bool ixgbe_can_reuse_page(struct ixgbe_rx_buffer *rx_buffer) |
| { |
| struct page *page = rx_buffer->page; |
| |
| /* if we are only owner of page and it is local we can reuse it */ |
| return likely(page_count(page) == 1) && |
| likely(page_to_nid(page) == numa_node_id()); |
| } |
| |
| /** |
| * ixgbe_reuse_rx_page - page flip buffer and store it back on the ring |
| * @rx_ring: rx descriptor ring to store buffers on |
| * @old_buff: donor buffer to have page reused |
| * |
| * Syncronizes page for reuse by the adapter |
| **/ |
| static void ixgbe_reuse_rx_page(struct ixgbe_ring *rx_ring, |
| struct ixgbe_rx_buffer *old_buff) |
| { |
| struct ixgbe_rx_buffer *new_buff; |
| u16 nta = rx_ring->next_to_alloc; |
| u16 bufsz = ixgbe_rx_bufsz(rx_ring); |
| |
| new_buff = &rx_ring->rx_buffer_info[nta]; |
| |
| /* update, and store next to alloc */ |
| nta++; |
| rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; |
| |
| /* transfer page from old buffer to new buffer */ |
| new_buff->page = old_buff->page; |
| new_buff->dma = old_buff->dma; |
| |
| /* flip page offset to other buffer and store to new_buff */ |
| new_buff->page_offset = old_buff->page_offset ^ bufsz; |
| |
| /* sync the buffer for use by the device */ |
| dma_sync_single_range_for_device(rx_ring->dev, new_buff->dma, |
| new_buff->page_offset, bufsz, |
| DMA_FROM_DEVICE); |
| |
| /* bump ref count on page before it is given to the stack */ |
| get_page(new_buff->page); |
| } |
| |
| /** |
| * ixgbe_add_rx_frag - Add contents of Rx buffer to sk_buff |
| * @rx_ring: rx descriptor ring to transact packets on |
| * @rx_buffer: buffer containing page to add |
| * @rx_desc: descriptor containing length of buffer written by hardware |
| * @skb: sk_buff to place the data into |
| * |
| * This function is based on skb_add_rx_frag. I would have used that |
| * function however it doesn't handle the truesize case correctly since we |
| * are allocating more memory than might be used for a single receive. |
| **/ |
| static void ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring, |
| struct ixgbe_rx_buffer *rx_buffer, |
| struct sk_buff *skb, int size) |
| { |
| skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, |
| rx_buffer->page, rx_buffer->page_offset, |
| size); |
| skb->len += size; |
| skb->data_len += size; |
| skb->truesize += ixgbe_rx_bufsz(rx_ring); |
| } |
| |
| /** |
| * ixgbe_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf |
| * @q_vector: structure containing interrupt and ring information |
| * @rx_ring: rx descriptor ring to transact packets on |
| * @budget: Total limit on number of packets to process |
| * |
| * This function provides a "bounce buffer" approach to Rx interrupt |
| * processing. The advantage to this is that on systems that have |
| * expensive overhead for IOMMU access this provides a means of avoiding |
| * it by maintaining the mapping of the page to the syste. |
| * |
| * Returns true if all work is completed without reaching budget |
| **/ |
| static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, |
| struct ixgbe_ring *rx_ring, |
| int budget) |
| { |
| unsigned int total_rx_bytes = 0, total_rx_packets = 0; |
| #ifdef IXGBE_FCOE |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| int ddp_bytes = 0; |
| #endif /* IXGBE_FCOE */ |
| u16 cleaned_count = ixgbe_desc_unused(rx_ring); |
| |
| do { |
| struct ixgbe_rx_buffer *rx_buffer; |
| union ixgbe_adv_rx_desc *rx_desc; |
| struct sk_buff *skb; |
| struct page *page; |
| u16 ntc; |
| |
| /* return some buffers to hardware, one at a time is too slow */ |
| if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) { |
| ixgbe_alloc_rx_buffers(rx_ring, cleaned_count); |
| cleaned_count = 0; |
| } |
| |
| ntc = rx_ring->next_to_clean; |
| rx_desc = IXGBE_RX_DESC(rx_ring, ntc); |
| rx_buffer = &rx_ring->rx_buffer_info[ntc]; |
| |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_DD)) |
| break; |
| |
| /* |
| * This memory barrier is needed to keep us from reading |
| * any other fields out of the rx_desc until we know the |
| * RXD_STAT_DD bit is set |
| */ |
| rmb(); |
| |
| page = rx_buffer->page; |
| prefetchw(page); |
| |
| skb = rx_buffer->skb; |
| |
| if (likely(!skb)) { |
| void *page_addr = page_address(page) + |
| rx_buffer->page_offset; |
| |
| /* prefetch first cache line of first page */ |
| prefetch(page_addr); |
| #if L1_CACHE_BYTES < 128 |
| prefetch(page_addr + L1_CACHE_BYTES); |
| #endif |
| |
| /* allocate a skb to store the frags */ |
| skb = netdev_alloc_skb_ip_align(rx_ring->netdev, |
| IXGBE_RX_HDR_SIZE); |
| if (unlikely(!skb)) { |
| rx_ring->rx_stats.alloc_rx_buff_failed++; |
| break; |
| } |
| |
| /* |
| * we will be copying header into skb->data in |
| * pskb_may_pull so it is in our interest to prefetch |
| * it now to avoid a possible cache miss |
| */ |
| prefetchw(skb->data); |
| |
| /* |
| * Delay unmapping of the first packet. It carries the |
| * header information, HW may still access the header |
| * after the writeback. Only unmap it when EOP is |
| * reached |
| */ |
| IXGBE_CB(skb)->dma = rx_buffer->dma; |
| } else { |
| /* we are reusing so sync this buffer for CPU use */ |
| dma_sync_single_range_for_cpu(rx_ring->dev, |
| rx_buffer->dma, |
| rx_buffer->page_offset, |
| ixgbe_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| } |
| |
| /* pull page into skb */ |
| ixgbe_add_rx_frag(rx_ring, rx_buffer, skb, |
| le16_to_cpu(rx_desc->wb.upper.length)); |
| |
| if (ixgbe_can_reuse_page(rx_buffer)) { |
| /* hand second half of page back to the ring */ |
| ixgbe_reuse_rx_page(rx_ring, rx_buffer); |
| } else if (IXGBE_CB(skb)->dma == rx_buffer->dma) { |
| /* the page has been released from the ring */ |
| IXGBE_CB(skb)->page_released = true; |
| } else { |
| /* we are not reusing the buffer so unmap it */ |
| dma_unmap_page(rx_ring->dev, rx_buffer->dma, |
| ixgbe_rx_pg_size(rx_ring), |
| DMA_FROM_DEVICE); |
| } |
| |
| /* clear contents of buffer_info */ |
| rx_buffer->skb = NULL; |
| rx_buffer->dma = 0; |
| rx_buffer->page = NULL; |
| |
| ixgbe_get_rsc_cnt(rx_ring, rx_desc, skb); |
| |
| cleaned_count++; |
| |
| /* place incomplete frames back on ring for completion */ |
| if (ixgbe_is_non_eop(rx_ring, rx_desc, skb)) |
| continue; |
| |
| /* verify the packet layout is correct */ |
| if (ixgbe_cleanup_headers(rx_ring, rx_desc, skb)) |
| continue; |
| |
| /* probably a little skewed due to removing CRC */ |
| total_rx_bytes += skb->len; |
| total_rx_packets++; |
| |
| /* populate checksum, timestamp, VLAN, and protocol */ |
| ixgbe_process_skb_fields(rx_ring, rx_desc, skb); |
| |
| #ifdef IXGBE_FCOE |
| /* if ddp, not passing to ULD unless for FCP_RSP or error */ |
| if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) { |
| ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb); |
| if (!ddp_bytes) { |
| dev_kfree_skb_any(skb); |
| continue; |
| } |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| ixgbe_rx_skb(q_vector, skb); |
| |
| /* update budget accounting */ |
| budget--; |
| } while (likely(budget)); |
| |
| #ifdef IXGBE_FCOE |
| /* include DDPed FCoE data */ |
| if (ddp_bytes > 0) { |
| unsigned int mss; |
| |
| mss = rx_ring->netdev->mtu - sizeof(struct fcoe_hdr) - |
| sizeof(struct fc_frame_header) - |
| sizeof(struct fcoe_crc_eof); |
| if (mss > 512) |
| mss &= ~511; |
| total_rx_bytes += ddp_bytes; |
| total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss); |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| u64_stats_update_begin(&rx_ring->syncp); |
| rx_ring->stats.packets += total_rx_packets; |
| rx_ring->stats.bytes += total_rx_bytes; |
| u64_stats_update_end(&rx_ring->syncp); |
| q_vector->rx.total_packets += total_rx_packets; |
| q_vector->rx.total_bytes += total_rx_bytes; |
| |
| if (cleaned_count) |
| ixgbe_alloc_rx_buffers(rx_ring, cleaned_count); |
| |
| return !!budget; |
| } |
| |
| /** |
| * ixgbe_configure_msix - Configure MSI-X hardware |
| * @adapter: board private structure |
| * |
| * ixgbe_configure_msix sets up the hardware to properly generate MSI-X |
| * interrupts. |
| **/ |
| static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_q_vector *q_vector; |
| int q_vectors, v_idx; |
| u32 mask; |
| |
| q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| /* Populate MSIX to EITR Select */ |
| if (adapter->num_vfs > 32) { |
| u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel); |
| } |
| |
| /* |
| * Populate the IVAR table and set the ITR values to the |
| * corresponding register. |
| */ |
| for (v_idx = 0; v_idx < q_vectors; v_idx++) { |
| struct ixgbe_ring *ring; |
| q_vector = adapter->q_vector[v_idx]; |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) |
| ixgbe_set_ivar(adapter, 0, ring->reg_idx, v_idx); |
| |
| ixgbe_for_each_ring(ring, q_vector->tx) |
| ixgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx); |
| |
| if (q_vector->tx.ring && !q_vector->rx.ring) { |
| /* tx only vector */ |
| if (adapter->tx_itr_setting == 1) |
| q_vector->itr = IXGBE_10K_ITR; |
| else |
| q_vector->itr = adapter->tx_itr_setting; |
| } else { |
| /* rx or rx/tx vector */ |
| if (adapter->rx_itr_setting == 1) |
| q_vector->itr = IXGBE_20K_ITR; |
| else |
| q_vector->itr = adapter->rx_itr_setting; |
| } |
| |
| ixgbe_write_eitr(q_vector); |
| } |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX, |
| v_idx); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| ixgbe_set_ivar(adapter, -1, 1, v_idx); |
| break; |
| default: |
| break; |
| } |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950); |
| |
| /* set up to autoclear timer, and the vectors */ |
| mask = IXGBE_EIMS_ENABLE_MASK; |
| mask &= ~(IXGBE_EIMS_OTHER | |
| IXGBE_EIMS_MAILBOX | |
| IXGBE_EIMS_LSC); |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask); |
| } |
| |
| enum latency_range { |
| lowest_latency = 0, |
| low_latency = 1, |
| bulk_latency = 2, |
| latency_invalid = 255 |
| }; |
| |
| /** |
| * ixgbe_update_itr - update the dynamic ITR value based on statistics |
| * @q_vector: structure containing interrupt and ring information |
| * @ring_container: structure containing ring performance data |
| * |
| * Stores a new ITR value based on packets and byte |
| * counts during the last interrupt. The advantage of per interrupt |
| * computation is faster updates and more accurate ITR for the current |
| * traffic pattern. Constants in this function were computed |
| * based on theoretical maximum wire speed and thresholds were set based |
| * on testing data as well as attempting to minimize response time |
| * while increasing bulk throughput. |
| * this functionality is controlled by the InterruptThrottleRate module |
| * parameter (see ixgbe_param.c) |
| **/ |
| static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector, |
| struct ixgbe_ring_container *ring_container) |
| { |
| int bytes = ring_container->total_bytes; |
| int packets = ring_container->total_packets; |
| u32 timepassed_us; |
| u64 bytes_perint; |
| u8 itr_setting = ring_container->itr; |
| |
| if (packets == 0) |
| return; |
| |
| /* simple throttlerate management |
| * 0-10MB/s lowest (100000 ints/s) |
| * 10-20MB/s low (20000 ints/s) |
| * 20-1249MB/s bulk (8000 ints/s) |
| */ |
| /* what was last interrupt timeslice? */ |
| timepassed_us = q_vector->itr >> 2; |
| bytes_perint = bytes / timepassed_us; /* bytes/usec */ |
| |
| switch (itr_setting) { |
| case lowest_latency: |
| if (bytes_perint > 10) |
| itr_setting = low_latency; |
| break; |
| case low_latency: |
| if (bytes_perint > 20) |
| itr_setting = bulk_latency; |
| else if (bytes_perint <= 10) |
| itr_setting = lowest_latency; |
| break; |
| case bulk_latency: |
| if (bytes_perint <= 20) |
| itr_setting = low_latency; |
| break; |
| } |
| |
| /* clear work counters since we have the values we need */ |
| ring_container->total_bytes = 0; |
| ring_container->total_packets = 0; |
| |
| /* write updated itr to ring container */ |
| ring_container->itr = itr_setting; |
| } |
| |
| /** |
| * ixgbe_write_eitr - write EITR register in hardware specific way |
| * @q_vector: structure containing interrupt and ring information |
| * |
| * This function is made to be called by ethtool and by the driver |
| * when it needs to update EITR registers at runtime. Hardware |
| * specific quirks/differences are taken care of here. |
| */ |
| void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int v_idx = q_vector->v_idx; |
| u32 itr_reg = q_vector->itr & IXGBE_MAX_EITR; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| /* must write high and low 16 bits to reset counter */ |
| itr_reg |= (itr_reg << 16); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| /* |
| * set the WDIS bit to not clear the timer bits and cause an |
| * immediate assertion of the interrupt |
| */ |
| itr_reg |= IXGBE_EITR_CNT_WDIS; |
| break; |
| default: |
| break; |
| } |
| IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg); |
| } |
| |
| static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector) |
| { |
| u32 new_itr = q_vector->itr; |
| u8 current_itr; |
| |
| ixgbe_update_itr(q_vector, &q_vector->tx); |
| ixgbe_update_itr(q_vector, &q_vector->rx); |
| |
| current_itr = max(q_vector->rx.itr, q_vector->tx.itr); |
| |
| switch (current_itr) { |
| /* counts and packets in update_itr are dependent on these numbers */ |
| case lowest_latency: |
| new_itr = IXGBE_100K_ITR; |
| break; |
| case low_latency: |
| new_itr = IXGBE_20K_ITR; |
| break; |
| case bulk_latency: |
| new_itr = IXGBE_8K_ITR; |
| break; |
| default: |
| break; |
| } |
| |
| if (new_itr != q_vector->itr) { |
| /* do an exponential smoothing */ |
| new_itr = (10 * new_itr * q_vector->itr) / |
| ((9 * new_itr) + q_vector->itr); |
| |
| /* save the algorithm value here */ |
| q_vector->itr = new_itr; |
| |
| ixgbe_write_eitr(q_vector); |
| } |
| } |
| |
| /** |
| * ixgbe_check_overtemp_subtask - check for over temperature |
| * @adapter: pointer to adapter |
| **/ |
| static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 eicr = adapter->interrupt_event; |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return; |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && |
| !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT; |
| |
| switch (hw->device_id) { |
| case IXGBE_DEV_ID_82599_T3_LOM: |
| /* |
| * Since the warning interrupt is for both ports |
| * we don't have to check if: |
| * - This interrupt wasn't for our port. |
| * - We may have missed the interrupt so always have to |
| * check if we got a LSC |
| */ |
| if (!(eicr & IXGBE_EICR_GPI_SDP0) && |
| !(eicr & IXGBE_EICR_LSC)) |
| return; |
| |
| if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) { |
| u32 autoneg; |
| bool link_up = false; |
| |
| hw->mac.ops.check_link(hw, &autoneg, &link_up, false); |
| |
| if (link_up) |
| return; |
| } |
| |
| /* Check if this is not due to overtemp */ |
| if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP) |
| return; |
| |
| break; |
| default: |
| if (!(eicr & IXGBE_EICR_GPI_SDP0)) |
| return; |
| break; |
| } |
| e_crit(drv, |
| "Network adapter has been stopped because it has over heated. " |
| "Restart the computer. If the problem persists, " |
| "power off the system and replace the adapter\n"); |
| |
| adapter->interrupt_event = 0; |
| } |
| |
| static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) && |
| (eicr & IXGBE_EICR_GPI_SDP1)) { |
| e_crit(probe, "Fan has stopped, replace the adapter\n"); |
| /* write to clear the interrupt */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); |
| } |
| } |
| |
| static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr) |
| { |
| if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)) |
| return; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| /* |
| * Need to check link state so complete overtemp check |
| * on service task |
| */ |
| if (((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)) && |
| (!test_bit(__IXGBE_DOWN, &adapter->state))) { |
| adapter->interrupt_event = eicr; |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; |
| ixgbe_service_event_schedule(adapter); |
| return; |
| } |
| return; |
| case ixgbe_mac_X540: |
| if (!(eicr & IXGBE_EICR_TS)) |
| return; |
| break; |
| default: |
| return; |
| } |
| |
| e_crit(drv, |
| "Network adapter has been stopped because it has over heated. " |
| "Restart the computer. If the problem persists, " |
| "power off the system and replace the adapter\n"); |
| } |
| |
| static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (eicr & IXGBE_EICR_GPI_SDP2) { |
| /* Clear the interrupt */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| |
| if (eicr & IXGBE_EICR_GPI_SDP1) { |
| /* Clear the interrupt */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| } |
| |
| static void ixgbe_check_lsc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| adapter->lsc_int++; |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; |
| adapter->link_check_timeout = jiffies; |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC); |
| IXGBE_WRITE_FLUSH(hw); |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| |
| static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter, |
| u64 qmask) |
| { |
| u32 mask; |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| mask = (qmask & 0xFFFFFFFF); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask); |
| mask = (qmask >> 32); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask); |
| break; |
| default: |
| break; |
| } |
| /* skip the flush */ |
| } |
| |
| static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter, |
| u64 qmask) |
| { |
| u32 mask; |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| mask = (qmask & 0xFFFFFFFF); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask); |
| mask = (qmask >> 32); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask); |
| break; |
| default: |
| break; |
| } |
| /* skip the flush */ |
| } |
| |
| /** |
| * ixgbe_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| **/ |
| static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, |
| bool flush) |
| { |
| u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE); |
| |
| /* don't reenable LSC while waiting for link */ |
| if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) |
| mask &= ~IXGBE_EIMS_LSC; |
| |
| if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| mask |= IXGBE_EIMS_GPI_SDP0; |
| break; |
| case ixgbe_mac_X540: |
| mask |= IXGBE_EIMS_TS; |
| break; |
| default: |
| break; |
| } |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) |
| mask |= IXGBE_EIMS_GPI_SDP1; |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| mask |= IXGBE_EIMS_GPI_SDP1; |
| mask |= IXGBE_EIMS_GPI_SDP2; |
| case ixgbe_mac_X540: |
| mask |= IXGBE_EIMS_ECC; |
| mask |= IXGBE_EIMS_MAILBOX; |
| break; |
| default: |
| break; |
| } |
| if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) && |
| !(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) |
| mask |= IXGBE_EIMS_FLOW_DIR; |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); |
| if (queues) |
| ixgbe_irq_enable_queues(adapter, ~0); |
| if (flush) |
| IXGBE_WRITE_FLUSH(&adapter->hw); |
| } |
| |
| static irqreturn_t ixgbe_msix_other(int irq, void *data) |
| { |
| struct ixgbe_adapter *adapter = data; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 eicr; |
| |
| /* |
| * Workaround for Silicon errata. Use clear-by-write instead |
| * of clear-by-read. Reading with EICS will return the |
| * interrupt causes without clearing, which later be done |
| * with the write to EICR. |
| */ |
| eicr = IXGBE_READ_REG(hw, IXGBE_EICS); |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr); |
| |
| if (eicr & IXGBE_EICR_LSC) |
| ixgbe_check_lsc(adapter); |
| |
| if (eicr & IXGBE_EICR_MAILBOX) |
| ixgbe_msg_task(adapter); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| if (eicr & IXGBE_EICR_ECC) |
| e_info(link, "Received unrecoverable ECC Err, please " |
| "reboot\n"); |
| /* Handle Flow Director Full threshold interrupt */ |
| if (eicr & IXGBE_EICR_FLOW_DIR) { |
| int reinit_count = 0; |
| int i; |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *ring = adapter->tx_ring[i]; |
| if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE, |
| &ring->state)) |
| reinit_count++; |
| } |
| if (reinit_count) { |
| /* no more flow director interrupts until after init */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR); |
| adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT; |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| ixgbe_check_sfp_event(adapter, eicr); |
| ixgbe_check_overtemp_event(adapter, eicr); |
| break; |
| default: |
| break; |
| } |
| |
| ixgbe_check_fan_failure(adapter, eicr); |
| #ifdef CONFIG_IXGBE_PTP |
| ixgbe_ptp_check_pps_event(adapter, eicr); |
| #endif |
| |
| /* re-enable the original interrupt state, no lsc, no queues */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter, false, false); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data) |
| { |
| struct ixgbe_q_vector *q_vector = data; |
| |
| /* EIAM disabled interrupts (on this vector) for us */ |
| |
| if (q_vector->rx.ring || q_vector->tx.ring) |
| napi_schedule(&q_vector->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ixgbe_poll - NAPI Rx polling callback |
| * @napi: structure for representing this polling device |
| * @budget: how many packets driver is allowed to clean |
| * |
| * This function is used for legacy and MSI, NAPI mode |
| **/ |
| int ixgbe_poll(struct napi_struct *napi, int budget) |
| { |
| struct ixgbe_q_vector *q_vector = |
| container_of(napi, struct ixgbe_q_vector, napi); |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *ring; |
| int per_ring_budget; |
| bool clean_complete = true; |
| |
| #ifdef CONFIG_IXGBE_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| ixgbe_update_dca(q_vector); |
| #endif |
| |
| ixgbe_for_each_ring(ring, q_vector->tx) |
| clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring); |
| |
| /* attempt to distribute budget to each queue fairly, but don't allow |
| * the budget to go below 1 because we'll exit polling */ |
| if (q_vector->rx.count > 1) |
| per_ring_budget = max(budget/q_vector->rx.count, 1); |
| else |
| per_ring_budget = budget; |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) |
| clean_complete &= ixgbe_clean_rx_irq(q_vector, ring, |
| per_ring_budget); |
| |
| /* If all work not completed, return budget and keep polling */ |
| if (!clean_complete) |
| return budget; |
| |
| /* all work done, exit the polling mode */ |
| napi_complete(napi); |
| if (adapter->rx_itr_setting & 1) |
| ixgbe_set_itr(q_vector); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx)); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_request_msix_irqs - Initialize MSI-X interrupts |
| * @adapter: board private structure |
| * |
| * ixgbe_request_msix_irqs allocates MSI-X vectors and requests |
| * interrupts from the kernel. |
| **/ |
| static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| int vector, err; |
| int ri = 0, ti = 0; |
| |
| for (vector = 0; vector < q_vectors; vector++) { |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[vector]; |
| struct msix_entry *entry = &adapter->msix_entries[vector]; |
| |
| if (q_vector->tx.ring && q_vector->rx.ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", netdev->name, "TxRx", ri++); |
| ti++; |
| } else if (q_vector->rx.ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", netdev->name, "rx", ri++); |
| } else if (q_vector->tx.ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", netdev->name, "tx", ti++); |
| } else { |
| /* skip this unused q_vector */ |
| continue; |
| } |
| err = request_irq(entry->vector, &ixgbe_msix_clean_rings, 0, |
| q_vector->name, q_vector); |
| if (err) { |
| e_err(probe, "request_irq failed for MSIX interrupt " |
| "Error: %d\n", err); |
| goto free_queue_irqs; |
| } |
| /* If Flow Director is enabled, set interrupt affinity */ |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { |
| /* assign the mask for this irq */ |
| irq_set_affinity_hint(entry->vector, |
| &q_vector->affinity_mask); |
| } |
| } |
| |
| err = request_irq(adapter->msix_entries[vector].vector, |
| ixgbe_msix_other, 0, netdev->name, adapter); |
| if (err) { |
| e_err(probe, "request_irq for msix_other failed: %d\n", err); |
| goto free_queue_irqs; |
| } |
| |
| return 0; |
| |
| free_queue_irqs: |
| while (vector) { |
| vector--; |
| irq_set_affinity_hint(adapter->msix_entries[vector].vector, |
| NULL); |
| free_irq(adapter->msix_entries[vector].vector, |
| adapter->q_vector[vector]); |
| } |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; |
| pci_disable_msix(adapter->pdev); |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| return err; |
| } |
| |
| /** |
| * ixgbe_intr - legacy mode Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| **/ |
| static irqreturn_t ixgbe_intr(int irq, void *data) |
| { |
| struct ixgbe_adapter *adapter = data; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; |
| u32 eicr; |
| |
| /* |
| * Workaround for silicon errata #26 on 82598. Mask the interrupt |
| * before the read of EICR. |
| */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); |
| |
| /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read |
| * therefore no explicit interrupt disable is necessary */ |
| eicr = IXGBE_READ_REG(hw, IXGBE_EICR); |
| if (!eicr) { |
| /* |
| * shared interrupt alert! |
| * make sure interrupts are enabled because the read will |
| * have disabled interrupts due to EIAM |
| * finish the workaround of silicon errata on 82598. Unmask |
| * the interrupt that we masked before the EICR read. |
| */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter, true, true); |
| return IRQ_NONE; /* Not our interrupt */ |
| } |
| |
| if (eicr & IXGBE_EICR_LSC) |
| ixgbe_check_lsc(adapter); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| ixgbe_check_sfp_event(adapter, eicr); |
| /* Fall through */ |
| case ixgbe_mac_X540: |
| if (eicr & IXGBE_EICR_ECC) |
| e_info(link, "Received unrecoverable ECC err, please " |
| "reboot\n"); |
| ixgbe_check_overtemp_event(adapter, eicr); |
| break; |
| default: |
| break; |
| } |
| |
| ixgbe_check_fan_failure(adapter, eicr); |
| #ifdef CONFIG_IXGBE_PTP |
| ixgbe_ptp_check_pps_event(adapter, eicr); |
| #endif |
| |
| /* would disable interrupts here but EIAM disabled it */ |
| napi_schedule(&q_vector->napi); |
| |
| /* |
| * re-enable link(maybe) and non-queue interrupts, no flush. |
| * ixgbe_poll will re-enable the queue interrupts |
| */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter, false, false); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ixgbe_request_irq - initialize interrupts |
| * @adapter: board private structure |
| * |
| * Attempts to configure interrupts using the best available |
| * capabilities of the hardware and kernel. |
| **/ |
| static int ixgbe_request_irq(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int err; |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) |
| err = ixgbe_request_msix_irqs(adapter); |
| else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) |
| err = request_irq(adapter->pdev->irq, ixgbe_intr, 0, |
| netdev->name, adapter); |
| else |
| err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED, |
| netdev->name, adapter); |
| |
| if (err) |
| e_err(probe, "request_irq failed, Error %d\n", err); |
| |
| return err; |
| } |
| |
| static void ixgbe_free_irq(struct ixgbe_adapter *adapter) |
| { |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| int i, q_vectors; |
| |
| q_vectors = adapter->num_msix_vectors; |
| i = q_vectors - 1; |
| free_irq(adapter->msix_entries[i].vector, adapter); |
| i--; |
| |
| for (; i >= 0; i--) { |
| /* free only the irqs that were actually requested */ |
| if (!adapter->q_vector[i]->rx.ring && |
| !adapter->q_vector[i]->tx.ring) |
| continue; |
| |
| /* clear the affinity_mask in the IRQ descriptor */ |
| irq_set_affinity_hint(adapter->msix_entries[i].vector, |
| NULL); |
| |
| free_irq(adapter->msix_entries[i].vector, |
| adapter->q_vector[i]); |
| } |
| } else { |
| free_irq(adapter->pdev->irq, adapter); |
| } |
| } |
| |
| /** |
| * ixgbe_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| **/ |
| static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) |
| { |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0); |
| break; |
| default: |
| break; |
| } |
| IXGBE_WRITE_FLUSH(&adapter->hw); |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| int i; |
| for (i = 0; i < adapter->num_msix_vectors; i++) |
| synchronize_irq(adapter->msix_entries[i].vector); |
| } else { |
| synchronize_irq(adapter->pdev->irq); |
| } |
| } |
| |
| /** |
| * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts |
| * |
| **/ |
| static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; |
| |
| /* rx/tx vector */ |
| if (adapter->rx_itr_setting == 1) |
| q_vector->itr = IXGBE_20K_ITR; |
| else |
| q_vector->itr = adapter->rx_itr_setting; |
| |
| ixgbe_write_eitr(q_vector); |
| |
| ixgbe_set_ivar(adapter, 0, 0, 0); |
| ixgbe_set_ivar(adapter, 1, 0, 0); |
| |
| e_info(hw, "Legacy interrupt IVAR setup done\n"); |
| } |
| |
| /** |
| * ixgbe_configure_tx_ring - Configure 8259x Tx ring after Reset |
| * @adapter: board private structure |
| * @ring: structure containing ring specific data |
| * |
| * Configure the Tx descriptor ring after a reset. |
| **/ |
| void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u64 tdba = ring->dma; |
| int wait_loop = 10; |
| u32 txdctl = IXGBE_TXDCTL_ENABLE; |
| u8 reg_idx = ring->reg_idx; |
| |
| /* disable queue to avoid issues while updating state */ |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), 0); |
| IXGBE_WRITE_FLUSH(hw); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAL(reg_idx), |
| (tdba & DMA_BIT_MASK(32))); |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAH(reg_idx), (tdba >> 32)); |
| IXGBE_WRITE_REG(hw, IXGBE_TDLEN(reg_idx), |
| ring->count * sizeof(union ixgbe_adv_tx_desc)); |
| IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0); |
| ring->tail = hw->hw_addr + IXGBE_TDT(reg_idx); |
| |
| /* |
| * set WTHRESH to encourage burst writeback, it should not be set |
| * higher than 1 when ITR is 0 as it could cause false TX hangs |
| * |
| * In order to avoid issues WTHRESH + PTHRESH should always be equal |
| * to or less than the number of on chip descriptors, which is |
| * currently 40. |
| */ |
| if (!ring->q_vector || (ring->q_vector->itr < 8)) |
| txdctl |= (1 << 16); /* WTHRESH = 1 */ |
| else |
| txdctl |= (8 << 16); /* WTHRESH = 8 */ |
| |
| /* |
| * Setting PTHRESH to 32 both improves performance |
| * and avoids a TX hang with DFP enabled |
| */ |
| txdctl |= (1 << 8) | /* HTHRESH = 1 */ |
| 32; /* PTHRESH = 32 */ |
| |
| /* reinitialize flowdirector state */ |
| if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) && |
| adapter->atr_sample_rate) { |
| ring->atr_sample_rate = adapter->atr_sample_rate; |
| ring->atr_count = 0; |
| set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state); |
| } else { |
| ring->atr_sample_rate = 0; |
| } |
| |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state); |
| |
| /* enable queue */ |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl); |
| |
| /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */ |
| if (hw->mac.type == ixgbe_mac_82598EB && |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) |
| return; |
| |
| /* poll to verify queue is enabled */ |
| do { |
| usleep_range(1000, 2000); |
| txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx)); |
| } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE)); |
| if (!wait_loop) |
| e_err(drv, "Could not enable Tx Queue %d\n", reg_idx); |
| } |
| |
| static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rttdcs; |
| u32 reg; |
| u8 tcs = netdev_get_num_tc(adapter->netdev); |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| /* disable the arbiter while setting MTQC */ |
| rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); |
| rttdcs |= IXGBE_RTTDCS_ARBDIS; |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); |
| |
| /* set transmit pool layout */ |
| switch (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| case (IXGBE_FLAG_SRIOV_ENABLED): |
| IXGBE_WRITE_REG(hw, IXGBE_MTQC, |
| (IXGBE_MTQC_VT_ENA | IXGBE_MTQC_64VF)); |
| break; |
| default: |
| if (!tcs) |
| reg = IXGBE_MTQC_64Q_1PB; |
| else if (tcs <= 4) |
| reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ; |
| else |
| reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg); |
| |
| /* Enable Security TX Buffer IFG for multiple pb */ |
| if (tcs) { |
| reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); |
| reg |= IXGBE_SECTX_DCB; |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg); |
| } |
| break; |
| } |
| |
| /* re-enable the arbiter */ |
| rttdcs &= ~IXGBE_RTTDCS_ARBDIS; |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); |
| } |
| |
| /** |
| * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx unit of the MAC after a reset. |
| **/ |
| static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 dmatxctl; |
| u32 i; |
| |
| ixgbe_setup_mtqc(adapter); |
| |
| if (hw->mac.type != ixgbe_mac_82598EB) { |
| /* DMATXCTL.EN must be before Tx queues are enabled */ |
| dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); |
| dmatxctl |= IXGBE_DMATXCTL_TE; |
| IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl); |
| } |
| |
| /* Setup the HW Tx Head and Tail descriptor pointers */ |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]); |
| } |
| |
| static void ixgbe_enable_rx_drop(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u8 reg_idx = ring->reg_idx; |
| u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx)); |
| |
| srrctl |= IXGBE_SRRCTL_DROP_EN; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); |
| } |
| |
| static void ixgbe_disable_rx_drop(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u8 reg_idx = ring->reg_idx; |
| u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx)); |
| |
| srrctl &= ~IXGBE_SRRCTL_DROP_EN; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); |
| } |
| |
| #ifdef CONFIG_IXGBE_DCB |
| void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter) |
| #else |
| static void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter) |
| #endif |
| { |
| int i; |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; |
| |
| if (adapter->ixgbe_ieee_pfc) |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); |
| |
| /* |
| * We should set the drop enable bit if: |
| * SR-IOV is enabled |
| * or |
| * Number of Rx queues > 1 and flow control is disabled |
| * |
| * This allows us to avoid head of line blocking for security |
| * and performance reasons. |
| */ |
| if (adapter->num_vfs || (adapter->num_rx_queues > 1 && |
| !(adapter->hw.fc.current_mode & ixgbe_fc_tx_pause) && !pfc_en)) { |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_enable_rx_drop(adapter, adapter->rx_ring[i]); |
| } else { |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_disable_rx_drop(adapter, adapter->rx_ring[i]); |
| } |
| } |
| |
| #define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 |
| |
| static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring) |
| { |
| u32 srrctl; |
| u8 reg_idx = rx_ring->reg_idx; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: { |
| struct ixgbe_ring_feature *feature = adapter->ring_feature; |
| const int mask = feature[RING_F_RSS].mask; |
| reg_idx = reg_idx & mask; |
| } |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| default: |
| break; |
| } |
| |
| srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx)); |
| |
| srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; |
| srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; |
| if (adapter->num_vfs) |
| srrctl |= IXGBE_SRRCTL_DROP_EN; |
| |
| srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & |
| IXGBE_SRRCTL_BSIZEHDR_MASK; |
| |
| #if PAGE_SIZE > IXGBE_MAX_RXBUFFER |
| srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; |
| #else |
| srrctl |= ixgbe_rx_bufsz(rx_ring) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; |
| #endif |
| srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx), srrctl); |
| } |
| |
| static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| static const u32 seed[10] = { 0xE291D73D, 0x1805EC6C, 0x2A94B30D, |
| 0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE, |
| 0x6A3E67EA, 0x14364D17, 0x3BED200D}; |
| u32 mrqc = 0, reta = 0; |
| u32 rxcsum; |
| int i, j; |
| u8 tcs = netdev_get_num_tc(adapter->netdev); |
| int maxq = adapter->ring_feature[RING_F_RSS].indices; |
| |
| if (tcs) |
| maxq = min(maxq, adapter->num_tx_queues / tcs); |
| |
| /* Fill out hash function seeds */ |
| for (i = 0; i < 10; i++) |
| IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), seed[i]); |
| |
| /* Fill out redirection table */ |
| for (i = 0, j = 0; i < 128; i++, j++) { |
| if (j == maxq) |
| j = 0; |
| /* reta = 4-byte sliding window of |
| * 0x00..(indices-1)(indices-1)00..etc. */ |
| reta = (reta << 8) | (j * 0x11); |
| if ((i & 3) == 3) |
| IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta); |
| } |
| |
| /* Disable indicating checksum in descriptor, enables RSS hash */ |
| rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); |
| rxcsum |= IXGBE_RXCSUM_PCSD; |
| IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB && |
| (adapter->flags & IXGBE_FLAG_RSS_ENABLED)) { |
| mrqc = IXGBE_MRQC_RSSEN; |
| } else { |
| int mask = adapter->flags & (IXGBE_FLAG_RSS_ENABLED |
| | IXGBE_FLAG_SRIOV_ENABLED); |
| |
| switch (mask) { |
| case (IXGBE_FLAG_RSS_ENABLED): |
| if (!tcs) |
| mrqc = IXGBE_MRQC_RSSEN; |
| else if (tcs <= 4) |
| mrqc = IXGBE_MRQC_RTRSS4TCEN; |
| else |
| mrqc = IXGBE_MRQC_RTRSS8TCEN; |
| break; |
| case (IXGBE_FLAG_SRIOV_ENABLED): |
| mrqc = IXGBE_MRQC_VMDQEN; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* Perform hash on these packet types */ |
| mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4 |
| | IXGBE_MRQC_RSS_FIELD_IPV4_TCP |
| | IXGBE_MRQC_RSS_FIELD_IPV6 |
| | IXGBE_MRQC_RSS_FIELD_IPV6_TCP; |
| |
| if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP) |
| mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP; |
| if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) |
| mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); |
| } |
| |
| /** |
| * ixgbe_configure_rscctl - enable RSC for the indicated ring |
| * @adapter: address of board private structure |
| * @index: index of ring to set |
| **/ |
| static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rscctrl; |
| u8 reg_idx = ring->reg_idx; |
| |
| if (!ring_is_rsc_enabled(ring)) |
| return; |
| |
| rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx)); |
| rscctrl |= IXGBE_RSCCTL_RSCEN; |
| /* |
| * we must limit the number of descriptors so that the |
| * total size of max desc * buf_len is not greater |
| * than 65536 |
| */ |
| #if (PAGE_SIZE <= 8192) |
| rscctrl |= IXGBE_RSCCTL_MAXDESC_16; |
| #elif (PAGE_SIZE <= 16384) |
| rscctrl |= IXGBE_RSCCTL_MAXDESC_8; |
| #else |
| rscctrl |= IXGBE_RSCCTL_MAXDESC_4; |
| #endif |
| IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl); |
| } |
| |
| #define IXGBE_MAX_RX_DESC_POLL 10 |
| static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int wait_loop = IXGBE_MAX_RX_DESC_POLL; |
| u32 rxdctl; |
| u8 reg_idx = ring->reg_idx; |
| |
| /* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */ |
| if (hw->mac.type == ixgbe_mac_82598EB && |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) |
| return; |
| |
| do { |
| usleep_range(1000, 2000); |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE)); |
| |
| if (!wait_loop) { |
| e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within " |
| "the polling period\n", reg_idx); |
| } |
| } |
| |
| void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int wait_loop = IXGBE_MAX_RX_DESC_POLL; |
| u32 rxdctl; |
| u8 reg_idx = ring->reg_idx; |
| |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| rxdctl &= ~IXGBE_RXDCTL_ENABLE; |
| |
| /* write value back with RXDCTL.ENABLE bit cleared */ |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); |
| |
| if (hw->mac.type == ixgbe_mac_82598EB && |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) |
| return; |
| |
| /* the hardware may take up to 100us to really disable the rx queue */ |
| do { |
| udelay(10); |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| } while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE)); |
| |
| if (!wait_loop) { |
| e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within " |
| "the polling period\n", reg_idx); |
| } |
| } |
| |
| void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u64 rdba = ring->dma; |
| u32 rxdctl; |
| u8 reg_idx = ring->reg_idx; |
| |
| /* disable queue to avoid issues while updating state */ |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| ixgbe_disable_rx_queue(adapter, ring); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32))); |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32)); |
| IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx), |
| ring->count * sizeof(union ixgbe_adv_rx_desc)); |
| IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0); |
| ring->tail = hw->hw_addr + IXGBE_RDT(reg_idx); |
| |
| ixgbe_configure_srrctl(adapter, ring); |
| ixgbe_configure_rscctl(adapter, ring); |
| |
| /* If operating in IOV mode set RLPML for X540 */ |
| if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && |
| hw->mac.type == ixgbe_mac_X540) { |
| rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK; |
| rxdctl |= ((ring->netdev->mtu + ETH_HLEN + |
| ETH_FCS_LEN + VLAN_HLEN) | IXGBE_RXDCTL_RLPML_EN); |
| } |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) { |
| /* |
| * enable cache line friendly hardware writes: |
| * PTHRESH=32 descriptors (half the internal cache), |
| * this also removes ugly rx_no_buffer_count increment |
| * HTHRESH=4 descriptors (to minimize latency on fetch) |
| * WTHRESH=8 burst writeback up to two cache lines |
| */ |
| rxdctl &= ~0x3FFFFF; |
| rxdctl |= 0x080420; |
| } |
| |
| /* enable receive descriptor ring */ |
| rxdctl |= IXGBE_RXDCTL_ENABLE; |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); |
| |
| ixgbe_rx_desc_queue_enable(adapter, ring); |
| ixgbe_alloc_rx_buffers(ring, ixgbe_desc_unused(ring)); |
| } |
| |
| static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int p; |
| |
| /* PSRTYPE must be initialized in non 82598 adapters */ |
| u32 psrtype = IXGBE_PSRTYPE_TCPHDR | |
| IXGBE_PSRTYPE_UDPHDR | |
| IXGBE_PSRTYPE_IPV4HDR | |
| IXGBE_PSRTYPE_L2HDR | |
| IXGBE_PSRTYPE_IPV6HDR; |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) |
| psrtype |= (adapter->num_rx_queues_per_pool << 29); |
| |
| for (p = 0; p < adapter->num_rx_pools; p++) |
| IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(adapter->num_vfs + p), |
| psrtype); |
| } |
| |
| static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 gcr_ext; |
| u32 vt_reg_bits; |
| u32 reg_offset, vf_shift; |
| u32 vmdctl; |
| int i; |
| |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return; |
| |
| vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL); |
| vt_reg_bits = IXGBE_VMD_CTL_VMDQ_EN | IXGBE_VT_CTL_REPLEN; |
| vt_reg_bits |= (adapter->num_vfs << IXGBE_VT_CTL_POOL_SHIFT); |
| IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits); |
| |
| vf_shift = adapter->num_vfs % 32; |
| reg_offset = (adapter->num_vfs >= 32) ? 1 : 0; |
| |
| /* Enable only the PF's pool for Tx/Rx */ |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift)); |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (1 << vf_shift)); |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); |
| |
| /* Map PF MAC address in RAR Entry 0 to first pool following VFs */ |
| hw->mac.ops.set_vmdq(hw, 0, adapter->num_vfs); |
| |
| /* |
| * Set up VF register offsets for selected VT Mode, |
| * i.e. 32 or 64 VFs for SR-IOV |
| */ |
| gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); |
| gcr_ext |= IXGBE_GCR_EXT_MSIX_EN; |
| gcr_ext |= IXGBE_GCR_EXT_VT_MODE_64; |
| IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); |
| |
| /* enable Tx loopback for VF/PF communication */ |
| IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); |
| /* Enable MAC Anti-Spoofing */ |
| hw->mac.ops.set_mac_anti_spoofing(hw, |
| (adapter->num_vfs != 0), |
| adapter->num_vfs); |
| /* For VFs that have spoof checking turned off */ |
| for (i = 0; i < adapter->num_vfs; i++) { |
| if (!adapter->vfinfo[i].spoofchk_enabled) |
| ixgbe_ndo_set_vf_spoofchk(adapter->netdev, i, false); |
| } |
| } |
| |
| static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| struct ixgbe_ring *rx_ring; |
| int i; |
| u32 mhadd, hlreg0; |
| |
| #ifdef IXGBE_FCOE |
| /* adjust max frame to be able to do baby jumbo for FCoE */ |
| if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && |
| (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE)) |
| max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE; |
| |
| #endif /* IXGBE_FCOE */ |
| mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); |
| if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { |
| mhadd &= ~IXGBE_MHADD_MFS_MASK; |
| mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd); |
| } |
| |
| /* MHADD will allow an extra 4 bytes past for vlan tagged frames */ |
| max_frame += VLAN_HLEN; |
| |
| hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); |
| /* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */ |
| hlreg0 |= IXGBE_HLREG0_JUMBOEN; |
| IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); |
| |
| /* |
| * Setup the HW Rx Head and Tail Descriptor Pointers and |
| * the Base and Length of the Rx Descriptor Ring |
| */ |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| rx_ring = adapter->rx_ring[i]; |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) |
| set_ring_rsc_enabled(rx_ring); |
| else |
| clear_ring_rsc_enabled(rx_ring); |
| } |
| } |
| |
| static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| /* |
| * For VMDq support of different descriptor types or |
| * buffer sizes through the use of multiple SRRCTL |
| * registers, RDRXCTL.MVMEN must be set to 1 |
| * |
| * also, the manual doesn't mention it clearly but DCA hints |
| * will only use queue 0's tags unless this bit is set. Side |
| * effects of setting this bit are only that SRRCTL must be |
| * fully programmed [0..15] |
| */ |
| rdrxctl |= IXGBE_RDRXCTL_MVMEN; |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| /* Disable RSC for ACK packets */ |
| IXGBE_WRITE_REG(hw, IXGBE_RSCDBU, |
| (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU))); |
| rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE; |
| /* hardware requires some bits to be set by default */ |
| rdrxctl |= (IXGBE_RDRXCTL_RSCACKC | IXGBE_RDRXCTL_FCOE_WRFIX); |
| rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP; |
| break; |
| default: |
| /* We should do nothing since we don't know this hardware */ |
| return; |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); |
| } |
| |
| /** |
| * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Rx unit of the MAC after a reset. |
| **/ |
| static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| u32 rxctrl; |
| |
| /* disable receives while setting up the descriptors */ |
| rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); |
| IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); |
| |
| ixgbe_setup_psrtype(adapter); |
| ixgbe_setup_rdrxctl(adapter); |
| |
| /* Program registers for the distribution of queues */ |
| ixgbe_setup_mrqc(adapter); |
| |
| /* set_rx_buffer_len must be called before ring initialization */ |
| ixgbe_set_rx_buffer_len(adapter); |
| |
| /* |
| * Setup the HW Rx Head and Tail Descriptor Pointers and |
| * the Base and Length of the Rx Descriptor Ring |
| */ |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_configure_rx_ring(adapter, adapter->rx_ring[i]); |
| |
| /* disable drop enable for 82598 parts */ |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| rxctrl |= IXGBE_RXCTRL_DMBYPS; |
| |
| /* enable all receives */ |
| rxctrl |= IXGBE_RXCTRL_RXEN; |
| hw->mac.ops.enable_rx_dma(hw, rxctrl); |
| } |
| |
| static int ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| int pool_ndx = adapter->num_vfs; |
| |
| /* add VID to filter table */ |
| hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, true); |
| set_bit(vid, adapter->active_vlans); |
| |
| return 0; |
| } |
| |
| static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| int pool_ndx = adapter->num_vfs; |
| |
| /* remove VID from filter table */ |
| hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, false); |
| clear_bit(vid, adapter->active_vlans); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_vlan_filter_disable - helper to disable hw vlan filtering |
| * @adapter: driver data |
| */ |
| static void ixgbe_vlan_filter_disable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl; |
| |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| } |
| |
| /** |
| * ixgbe_vlan_filter_enable - helper to enable hw vlan filtering |
| * @adapter: driver data |
| */ |
| static void ixgbe_vlan_filter_enable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl; |
| |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl |= IXGBE_VLNCTRL_VFE; |
| vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| } |
| |
| /** |
| * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping |
| * @adapter: driver data |
| */ |
| static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl; |
| int i, j; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl &= ~IXGBE_VLNCTRL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| j = adapter->rx_ring[i]->reg_idx; |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); |
| vlnctrl &= ~IXGBE_RXDCTL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * ixgbe_vlan_strip_enable - helper to enable hw vlan stripping |
| * @adapter: driver data |
| */ |
| static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl; |
| int i, j; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl |= IXGBE_VLNCTRL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| j = adapter->rx_ring[i]->reg_idx; |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); |
| vlnctrl |= IXGBE_RXDCTL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) |
| { |
| u16 vid; |
| |
| ixgbe_vlan_rx_add_vid(adapter->netdev, 0); |
| |
| for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) |
| ixgbe_vlan_rx_add_vid(adapter->netdev, vid); |
| } |
| |
| /** |
| * ixgbe_write_uc_addr_list - write unicast addresses to RAR table |
| * @netdev: network interface device structure |
| * |
| * Writes unicast address list to the RAR table. |
| * Returns: -ENOMEM on failure/insufficient address space |
| * 0 on no addresses written |
| * X on writing X addresses to the RAR table |
| **/ |
| static int ixgbe_write_uc_addr_list(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| unsigned int vfn = adapter->num_vfs; |
| unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS; |
| int count = 0; |
| |
| /* return ENOMEM indicating insufficient memory for addresses */ |
| if (netdev_uc_count(netdev) > rar_entries) |
| return -ENOMEM; |
| |
| if (!netdev_uc_empty(netdev) && rar_entries) { |
| struct netdev_hw_addr *ha; |
| /* return error if we do not support writing to RAR table */ |
| if (!hw->mac.ops.set_rar) |
| return -ENOMEM; |
| |
| netdev_for_each_uc_addr(ha, netdev) { |
| if (!rar_entries) |
| break; |
| hw->mac.ops.set_rar(hw, rar_entries--, ha->addr, |
| vfn, IXGBE_RAH_AV); |
| count++; |
| } |
| } |
| /* write the addresses in reverse order to avoid write combining */ |
| for (; rar_entries > 0 ; rar_entries--) |
| hw->mac.ops.clear_rar(hw, rar_entries); |
| |
| return count; |
| } |
| |
| /** |
| * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_rx_method entry point is called whenever the unicast/multicast |
| * address list or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper unicast, multicast and |
| * promiscuous mode. |
| **/ |
| void ixgbe_set_rx_mode(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; |
| int count; |
| |
| /* Check for Promiscuous and All Multicast modes */ |
| |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| |
| /* set all bits that we expect to always be set */ |
| fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */ |
| fctrl |= IXGBE_FCTRL_BAM; |
| fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ |
| fctrl |= IXGBE_FCTRL_PMCF; |
| |
| /* clear the bits we are changing the status of */ |
| fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); |
| |
| if (netdev->flags & IFF_PROMISC) { |
| hw->addr_ctrl.user_set_promisc = true; |
| fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); |
| vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE); |
| /* don't hardware filter vlans in promisc mode */ |
| ixgbe_vlan_filter_disable(adapter); |
| } else { |
| if (netdev->flags & IFF_ALLMULTI) { |
| fctrl |= IXGBE_FCTRL_MPE; |
| vmolr |= IXGBE_VMOLR_MPE; |
| } else { |
| /* |
| * Write addresses to the MTA, if the attempt fails |
| * then we should just turn on promiscuous mode so |
| * that we can at least receive multicast traffic |
| */ |
| hw->mac.ops.update_mc_addr_list(hw, netdev); |
| vmolr |= IXGBE_VMOLR_ROMPE; |
| } |
| ixgbe_vlan_filter_enable(adapter); |
| hw->addr_ctrl.user_set_promisc = false; |
| } |
| |
| /* |
| * Write addresses to available RAR registers, if there is not |
| * sufficient space to store all the addresses then enable |
| * unicast promiscuous mode |
| */ |
| count = ixgbe_write_uc_addr_list(netdev); |
| if (count < 0) { |
| fctrl |= IXGBE_FCTRL_UPE; |
| vmolr |= IXGBE_VMOLR_ROPE; |
| } |
| |
| if (adapter->num_vfs) { |
| ixgbe_restore_vf_multicasts(adapter); |
| vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(adapter->num_vfs)) & |
| ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE | |
| IXGBE_VMOLR_ROPE); |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(adapter->num_vfs), vmolr); |
| } |
| |
| /* This is useful for sniffing bad packets. */ |
| if (adapter->netdev->features & NETIF_F_RXALL) { |
| /* UPE and MPE will be handled by normal PROMISC logic |
| * in e1000e_set_rx_mode */ |
| fctrl |= (IXGBE_FCTRL_SBP | /* Receive bad packets */ |
| IXGBE_FCTRL_BAM | /* RX All Bcast Pkts */ |
| IXGBE_FCTRL_PMCF); /* RX All MAC Ctrl Pkts */ |
| |
| fctrl &= ~(IXGBE_FCTRL_DPF); |
| /* NOTE: VLAN filtering is disabled by setting PROMISC */ |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); |
| |
| if (netdev->features & NETIF_F_HW_VLAN_RX) |
| ixgbe_vlan_strip_enable(adapter); |
| else |
| ixgbe_vlan_strip_disable(adapter); |
| } |
| |
| static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) |
| { |
| int q_idx; |
| struct ixgbe_q_vector *q_vector; |
| int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| /* legacy and MSI only use one vector */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| q_vectors = 1; |
| |
| for (q_idx = 0; q_idx < q_vectors; q_idx++) { |
| q_vector = adapter->q_vector[q_idx]; |
| napi_enable(&q_vector->napi); |
| } |
| } |
| |
| static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) |
| { |
| int q_idx; |
| struct ixgbe_q_vector *q_vector; |
| int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| /* legacy and MSI only use one vector */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| q_vectors = 1; |
| |
| for (q_idx = 0; q_idx < q_vectors; q_idx++) { |
| q_vector = adapter->q_vector[q_idx]; |
| napi_disable(&q_vector->napi); |
| } |
| } |
| |
| #ifdef CONFIG_IXGBE_DCB |
| /* |
| * ixgbe_configure_dcb - Configure DCB hardware |
| * @adapter: ixgbe adapter struct |
| * |
| * This is called by the driver on open to configure the DCB hardware. |
| * This is also called by the gennetlink interface when reconfiguring |
| * the DCB state. |
| */ |
| static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) { |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| netif_set_gso_max_size(adapter->netdev, 65536); |
| return; |
| } |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| netif_set_gso_max_size(adapter->netdev, 32768); |
| |
| hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true); |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->netdev->features & NETIF_F_FCOE_MTU) |
| max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE); |
| #endif |
| |
| /* reconfigure the hardware */ |
| if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) { |
| ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, |
| DCB_TX_CONFIG); |
| ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, |
| DCB_RX_CONFIG); |
| ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg); |
| } else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) { |
| ixgbe_dcb_hw_ets(&adapter->hw, |
| adapter->ixgbe_ieee_ets, |
| max_frame); |
| ixgbe_dcb_hw_pfc_config(&adapter->hw, |
| adapter->ixgbe_ieee_pfc->pfc_en, |
| adapter->ixgbe_ieee_ets->prio_tc); |
| } |
| |
| /* Enable RSS Hash per TC */ |
| if (hw->mac.type != ixgbe_mac_82598EB) { |
| int i; |
| u32 reg = 0; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| u8 msb = 0; |
| u8 cnt = adapter->netdev->tc_to_txq[i].count; |
| |
| while (cnt >>= 1) |
| msb++; |
| |
| reg |= msb << IXGBE_RQTC_SHIFT_TC(i); |
| } |
| IXGBE_WRITE_REG(hw, IXGBE_RQTC, reg); |
| } |
| } |
| #endif |
| |
| /* Additional bittime to account for IXGBE framing */ |
| #define IXGBE_ETH_FRAMING 20 |
| |
| /* |
| * ixgbe_hpbthresh - calculate high water mark for flow control |
| * |
| * @adapter: board private structure to calculate for |
| * @pb - packet buffer to calculate |
| */ |
| static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *dev = adapter->netdev; |
| int link, tc, kb, marker; |
| u32 dv_id, rx_pba; |
| |
| /* Calculate max LAN frame size */ |
| tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING; |
| |
| #ifdef IXGBE_FCOE |
| /* FCoE traffic class uses FCOE jumbo frames */ |
| if (dev->features & NETIF_F_FCOE_MTU) { |
| int fcoe_pb = 0; |
| |
| #ifdef CONFIG_IXGBE_DCB |
| fcoe_pb = netdev_get_prio_tc_map(dev, adapter->fcoe.up); |
| |
| #endif |
| if (fcoe_pb == pb && tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) |
| tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; |
| } |
| #endif |
| |
| /* Calculate delay value for device */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_X540: |
| dv_id = IXGBE_DV_X540(link, tc); |
| break; |
| default: |
| dv_id = IXGBE_DV(link, tc); |
| break; |
| } |
| |
| /* Loopback switch introduces additional latency */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| dv_id += IXGBE_B2BT(tc); |
| |
| /* Delay value is calculated in bit times convert to KB */ |
| kb = IXGBE_BT2KB(dv_id); |
| rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10; |
| |
| marker = rx_pba - kb; |
| |
| /* It is possible that the packet buffer is not large enough |
| * to provide required headroom. In this case throw an error |
| * to user and a do the best we can. |
| */ |
| if (marker < 0) { |
| e_warn(drv, "Packet Buffer(%i) can not provide enough" |
| "headroom to support flow control." |
| "Decrease MTU or number of traffic classes\n", pb); |
| marker = tc + 1; |
| } |
| |
| return marker; |
| } |
| |
| /* |
| * ixgbe_lpbthresh - calculate low water mark for for flow control |
| * |
| * @adapter: board private structure to calculate for |
| * @pb - packet buffer to calculate |
| */ |
| static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *dev = adapter->netdev; |
| int tc; |
| u32 dv_id; |
| |
| /* Calculate max LAN frame size */ |
| tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| |
| /* Calculate delay value for device */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_X540: |
| dv_id = IXGBE_LOW_DV_X540(tc); |
| break; |
| default: |
| dv_id = IXGBE_LOW_DV(tc); |
| break; |
| } |
| |
| /* Delay value is calculated in bit times convert to KB */ |
| return IXGBE_BT2KB(dv_id); |
| } |
| |
| /* |
| * ixgbe_pbthresh_setup - calculate and setup high low water marks |
| */ |
| static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int num_tc = netdev_get_num_tc(adapter->netdev); |
| int i; |
| |
| if (!num_tc) |
| num_tc = 1; |
| |
| hw->fc.low_water = ixgbe_lpbthresh(adapter); |
| |
| for (i = 0; i < num_tc; i++) { |
| hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i); |
| |
| /* Low water marks must not be larger than high water marks */ |
| if (hw->fc.low_water > hw->fc.high_water[i]) |
| hw->fc.low_water = 0; |
| } |
| } |
| |
| static void ixgbe_configure_pb(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int hdrm; |
| u8 tc = netdev_get_num_tc(adapter->netdev); |
| |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || |
| adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) |
| hdrm = 32 << adapter->fdir_pballoc; |
| else |
| hdrm = 0; |
| |
| hw->mac.ops.set_rxpba(hw, tc, hdrm, PBA_STRATEGY_EQUAL); |
| ixgbe_pbthresh_setup(adapter); |
| } |
| |
| static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct hlist_node *node, *node2; |
| struct ixgbe_fdir_filter *filter; |
| |
| spin_lock(&adapter->fdir_perfect_lock); |
| |
| if (!hlist_empty(&adapter->fdir_filter_list)) |
| ixgbe_fdir_set_input_mask_82599(hw, &adapter->fdir_mask); |
| |
| hlist_for_each_entry_safe(filter, node, node2, |
| &adapter->fdir_filter_list, fdir_node) { |
| ixgbe_fdir_write_perfect_filter_82599(hw, |
| &filter->filter, |
| filter->sw_idx, |
| (filter->action == IXGBE_FDIR_DROP_QUEUE) ? |
| IXGBE_FDIR_DROP_QUEUE : |
| adapter->rx_ring[filter->action]->reg_idx); |
| } |
| |
| spin_unlock(&adapter->fdir_perfect_lock); |
| } |
| |
| static void ixgbe_configure(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| ixgbe_configure_pb(adapter); |
| #ifdef CONFIG_IXGBE_DCB |
| ixgbe_configure_dcb(adapter); |
| #endif |
| |
| ixgbe_set_rx_mode(adapter->netdev); |
| ixgbe_restore_vlan(adapter); |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) |
| ixgbe_configure_fcoe(adapter); |
| |
| #endif /* IXGBE_FCOE */ |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| hw->mac.ops.disable_rx_buff(hw); |
| break; |
| default: |
| break; |
| } |
| |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { |
| ixgbe_init_fdir_signature_82599(&adapter->hw, |
| adapter->fdir_pballoc); |
| } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { |
| ixgbe_init_fdir_perfect_82599(&adapter->hw, |
| adapter->fdir_pballoc); |
| ixgbe_fdir_filter_restore(adapter); |
| } |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| hw->mac.ops.enable_rx_buff(hw); |
| break; |
| default: |
| break; |
| } |
| |
| ixgbe_configure_virtualization(adapter); |
| |
| ixgbe_configure_tx(adapter); |
| ixgbe_configure_rx(adapter); |
| } |
| |
| static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) |
| { |
| switch (hw->phy.type) { |
| case ixgbe_phy_sfp_avago: |
| case ixgbe_phy_sfp_ftl: |
| case ixgbe_phy_sfp_intel: |
| case ixgbe_phy_sfp_unknown: |
| case ixgbe_phy_sfp_passive_tyco: |
| case ixgbe_phy_sfp_passive_unknown: |
| case ixgbe_phy_sfp_active_unknown: |
| case ixgbe_phy_sfp_ftl_active: |
| return true; |
| case ixgbe_phy_nl: |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /** |
| * ixgbe_sfp_link_config - set up SFP+ link |
| * @adapter: pointer to private adapter struct |
| **/ |
| static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) |
| { |
| /* |
| * We are assuming the worst case scenario here, and that |
| * is that an SFP was inserted/removed after the reset |
| * but before SFP detection was enabled. As such the best |
| * solution is to just start searching as soon as we start |
| */ |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; |
| |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; |
| } |
| |
| /** |
| * ixgbe_non_sfp_link_config - set up non-SFP+ link |
| * @hw: pointer to private hardware struct |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) |
| { |
| u32 autoneg; |
| bool negotiation, link_up = false; |
| u32 ret = IXGBE_ERR_LINK_SETUP; |
| |
| if (hw->mac.ops.check_link) |
| ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false); |
| |
| if (ret) |
| goto link_cfg_out; |
| |
| autoneg = hw->phy.autoneg_advertised; |
| if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) |
| ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, |
| &negotiation); |
| if (ret) |
| goto link_cfg_out; |
| |
| if (hw->mac.ops.setup_link) |
| ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up); |
| link_cfg_out: |
| return ret; |
| } |
| |
| static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 gpie = 0; |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT | |
| IXGBE_GPIE_OCD; |
| gpie |= IXGBE_GPIE_EIAME; |
| /* |
| * use EIAM to auto-mask when MSI-X interrupt is asserted |
| * this saves a register write for every interrupt |
| */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| default: |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF); |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF); |
| break; |
| } |
| } else { |
| /* legacy interrupts, use EIAM to auto-mask when reading EICR, |
| * specifically only auto mask tx and rx interrupts */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); |
| } |
| |
| /* XXX: to interrupt immediately for EICS writes, enable this */ |
| /* gpie |= IXGBE_GPIE_EIMEN; */ |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| gpie &= ~IXGBE_GPIE_VTMODE_MASK; |
| gpie |= IXGBE_GPIE_VTMODE_64; |
| } |
| |
| /* Enable Thermal over heat sensor interrupt */ |
| if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| gpie |= IXGBE_SDP0_GPIEN; |
| break; |
| case ixgbe_mac_X540: |
| gpie |= IXGBE_EIMS_TS; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* Enable fan failure interrupt */ |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) |
| gpie |= IXGBE_SDP1_GPIEN; |
| |
| if (hw->mac.type == ixgbe_mac_82599EB) { |
| gpie |= IXGBE_SDP1_GPIEN; |
| gpie |= IXGBE_SDP2_GPIEN; |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); |
| } |
| |
| static void ixgbe_up_complete(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int err; |
| u32 ctrl_ext; |
| |
| ixgbe_get_hw_control(adapter); |
| ixgbe_setup_gpie(adapter); |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) |
| ixgbe_configure_msix(adapter); |
| else |
| ixgbe_configure_msi_and_legacy(adapter); |
| |
| /* enable the optics for both mult-speed fiber and 82599 SFP+ fiber */ |
| if (hw->mac.ops.enable_tx_laser && |
| ((hw->phy.multispeed_fiber) || |
| ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && |
| (hw->mac.type == ixgbe_mac_82599EB)))) |
| hw->mac.ops.enable_tx_laser(hw); |
| |
| clear_bit(__IXGBE_DOWN, &adapter->state); |
| ixgbe_napi_enable_all(adapter); |
| |
| if (ixgbe_is_sfp(hw)) { |
| ixgbe_sfp_link_config(adapter); |
| } else { |
| err = ixgbe_non_sfp_link_config(hw); |
| if (err) |
| e_err(probe, "link_config FAILED %d\n", err); |
| } |
| |
| /* clear any pending interrupts, may auto mask */ |
| IXGBE_READ_REG(hw, IXGBE_EICR); |
| ixgbe_irq_enable(adapter, true, true); |
| |
| /* |
| * If this adapter has a fan, check to see if we had a failure |
| * before we enabled the interrupt. |
| */ |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { |
| u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); |
| if (esdp & IXGBE_ESDP_SDP1) |
| e_crit(drv, "Fan has stopped, replace the adapter\n"); |
| } |
| |
| /* enable transmits */ |
| netif_tx_start_all_queues(adapter->netdev); |
| |
| /* bring the link up in the watchdog, this could race with our first |
| * link up interrupt but shouldn't be a problem */ |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; |
| adapter->link_check_timeout = jiffies; |
| mod_timer(&adapter->service_timer, jiffies); |
| |
| /* Set PF Reset Done bit so PF/VF Mail Ops can work */ |
| ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); |
| ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); |
| } |
| |
| void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) |
| { |
| WARN_ON(in_interrupt()); |
| /* put off any impending NetWatchDogTimeout */ |
| adapter->netdev->trans_start = jiffies; |
| |
| while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) |
| usleep_range(1000, 2000); |
| ixgbe_down(adapter); |
| /* |
| * If SR-IOV enabled then wait a bit before bringing the adapter |
| * back up to give the VFs time to respond to the reset. The |
| * two second wait is based upon the watchdog timer cycle in |
| * the VF driver. |
| */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| msleep(2000); |
| ixgbe_up(adapter); |
| clear_bit(__IXGBE_RESETTING, &adapter->state); |
| } |
| |
| void ixgbe_up(struct ixgbe_adapter *adapter) |
| { |
| /* hardware has been reset, we need to reload some things */ |
| ixgbe_configure(adapter); |
| |
| ixgbe_up_complete(adapter); |
| } |
| |
| void ixgbe_reset(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int err; |
| |
| /* lock SFP init bit to prevent race conditions with the watchdog */ |
| while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) |
| usleep_range(1000, 2000); |
| |
| /* clear all SFP and link config related flags while holding SFP_INIT */ |
| adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | |
| IXGBE_FLAG2_SFP_NEEDS_RESET); |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; |
| |
| err = hw->mac.ops.init_hw(hw); |
| switch (err) { |
| case 0: |
| case IXGBE_ERR_SFP_NOT_PRESENT: |
| case IXGBE_ERR_SFP_NOT_SUPPORTED: |
| break; |
| case IXGBE_ERR_MASTER_REQUESTS_PENDING: |
| e_dev_err("master disable timed out\n"); |
| break; |
| case IXGBE_ERR_EEPROM_VERSION: |
| /* We are running on a pre-production device, log a warning */ |
| e_dev_warn("This device is a pre-production adapter/LOM. " |
| "Please be aware there may be issues associated with " |
| "your hardware. If you are experiencing problems " |
| "please contact your Intel or hardware " |
| "representative who provided you with this " |
| "hardware.\n"); |
| break; |
| default: |
| e_dev_err("Hardware Error: %d\n", err); |
| } |
| |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); |
| |
| /* reprogram the RAR[0] in case user changed it. */ |
| hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs, |
| IXGBE_RAH_AV); |
| } |
| |
| /** |
| * ixgbe_init_rx_page_offset - initialize page offset values for Rx buffers |
| * @rx_ring: ring to setup |
| * |
| * On many IA platforms the L1 cache has a critical stride of 4K, this |
| * results in each receive buffer starting in the same cache set. To help |
| * reduce the pressure on this cache set we can interleave the offsets so |
| * that only every other buffer will be in the same cache set. |
| **/ |
| static void ixgbe_init_rx_page_offset(struct ixgbe_ring *rx_ring) |
| { |
| struct ixgbe_rx_buffer *rx_buffer = rx_ring->rx_buffer_info; |
| u16 i; |
| |
| for (i = 0; i < rx_ring->count; i += 2) { |
| rx_buffer[0].page_offset = 0; |
| rx_buffer[1].page_offset = ixgbe_rx_bufsz(rx_ring); |
| rx_buffer = &rx_buffer[2]; |
| } |
| } |
| |
| /** |
| * ixgbe_clean_rx_ring - Free Rx Buffers per Queue |
| * @rx_ring: ring to free buffers from |
| **/ |
| static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring) |
| { |
| struct device *dev = rx_ring->dev; |
| unsigned long size; |
| u16 i; |
| |
| /* ring already cleared, nothing to do */ |
| if (!rx_ring->rx_buffer_info) |
| return; |
| |
| /* Free all the Rx ring sk_buffs */ |
| for (i = 0; i < rx_ring->count; i++) { |
| struct ixgbe_rx_buffer *rx_buffer; |
| |
| rx_buffer = &rx_ring->rx_buffer_info[i]; |
| if (rx_buffer->skb) { |
| struct sk_buff *skb = rx_buffer->skb; |
| if (IXGBE_CB(skb)->page_released) { |
| dma_unmap_page(dev, |
| IXGBE_CB(skb)->dma, |
| ixgbe_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| IXGBE_CB(skb)->page_released = false; |
| } |
| dev_kfree_skb(skb); |
| } |
| rx_buffer->skb = NULL; |
| if (rx_buffer->dma) |
| dma_unmap_page(dev, rx_buffer->dma, |
| ixgbe_rx_pg_size(rx_ring), |
| DMA_FROM_DEVICE); |
| rx_buffer->dma = 0; |
| if (rx_buffer->page) |
| __free_pages(rx_buffer->page, |
| ixgbe_rx_pg_order(rx_ring)); |
| rx_buffer->page = NULL; |
| } |
| |
| size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; |
| memset(rx_ring->rx_buffer_info, 0, size); |
| |
| ixgbe_init_rx_page_offset(rx_ring); |
| |
| /* Zero out the descriptor ring */ |
| memset(rx_ring->desc, 0, rx_ring->size); |
| |
| rx_ring->next_to_alloc = 0; |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| } |
| |
| /** |
| * ixgbe_clean_tx_ring - Free Tx Buffers |
| * @tx_ring: ring to be cleaned |
| **/ |
| static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring) |
| { |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| unsigned long size; |
| u16 i; |
| |
| /* ring already cleared, nothing to do */ |
| if (!tx_ring->tx_buffer_info) |
| return; |
| |
| /* Free all the Tx ring sk_buffs */ |
| for (i = 0; i < tx_ring->count; i++) { |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); |
| } |
| |
| netdev_tx_reset_queue(txring_txq(tx_ring)); |
| |
| size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; |
| memset(tx_ring->tx_buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(tx_ring->desc, 0, tx_ring->size); |
| |
| tx_ring->next_to_use = 0; |
| tx_ring->next_to_clean = 0; |
| } |
| |
| /** |
| * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_clean_rx_ring(adapter->rx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| ixgbe_clean_tx_ring(adapter->tx_ring[i]); |
| } |
| |
| static void ixgbe_fdir_filter_exit(struct ixgbe_adapter *adapter) |
| { |
| struct hlist_node *node, *node2; |
| struct ixgbe_fdir_filter *filter; |
| |
| spin_lock(&adapter->fdir_perfect_lock); |
| |
| hlist_for_each_entry_safe(filter, node, node2, |
| &adapter->fdir_filter_list, fdir_node) { |
| hlist_del(&filter->fdir_node); |
| kfree(filter); |
| } |
| adapter->fdir_filter_count = 0; |
| |
| spin_unlock(&adapter->fdir_perfect_lock); |
| } |
| |
| void ixgbe_down(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rxctrl; |
| int i; |
| |
| /* signal that we are down to the interrupt handler */ |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| |
| /* disable receives */ |
| rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); |
| IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); |
| |
| /* disable all enabled rx queues */ |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| /* this call also flushes the previous write */ |
| ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]); |
| |
| usleep_range(10000, 20000); |
| |
| netif_tx_stop_all_queues(netdev); |
| |
| /* call carrier off first to avoid false dev_watchdog timeouts */ |
| netif_carrier_off(netdev); |
| netif_tx_disable(netdev); |
| |
| ixgbe_irq_disable(adapter); |
| |
| ixgbe_napi_disable_all(adapter); |
| |
| adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT | |
| IXGBE_FLAG2_RESET_REQUESTED); |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; |
| |
| del_timer_sync(&adapter->service_timer); |
| |
| if (adapter->num_vfs) { |
| /* Clear EITR Select mapping */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0); |
| |
| /* Mark all the VFs as inactive */ |
| for (i = 0 ; i < adapter->num_vfs; i++) |
| adapter->vfinfo[i].clear_to_send = false; |
| |
| /* ping all the active vfs to let them know we are going down */ |
| ixgbe_ping_all_vfs(adapter); |
| |
| /* Disable all VFTE/VFRE TX/RX */ |
| ixgbe_disable_tx_rx(adapter); |
| } |
| |
| /* disable transmits in the hardware now that interrupts are off */ |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| u8 reg_idx = adapter->tx_ring[i]->reg_idx; |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); |
| } |
| |
| /* Disable the Tx DMA engine on 82599 and X540 */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, |
| (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & |
| ~IXGBE_DMATXCTL_TE)); |
| break; |
| default: |
| break; |
| } |
| |
| if (!pci_channel_offline(adapter->pdev)) |
| ixgbe_reset(adapter); |
| |
| /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ |
| if (hw->mac.ops.disable_tx_laser && |
| ((hw->phy.multispeed_fiber) || |
| ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && |
| (hw->mac.type == ixgbe_mac_82599EB)))) |
| hw->mac.ops.disable_tx_laser(hw); |
| |
| ixgbe_clean_all_tx_rings(adapter); |
| ixgbe_clean_all_rx_rings(adapter); |
| |
| #ifdef CONFIG_IXGBE_DCA |
| /* since we reset the hardware DCA settings were cleared */ |
| ixgbe_setup_dca(adapter); |
| #endif |
| } |
| |
| /** |
| * ixgbe_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| **/ |
| static void ixgbe_tx_timeout(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* Do the reset outside of interrupt context */ |
| ixgbe_tx_timeout_reset(adapter); |
| } |
| |
| /** |
| * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * ixgbe_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| **/ |
| static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned int rss; |
| #ifdef CONFIG_IXGBE_DCB |
| int j; |
| struct tc_configuration *tc; |
| #endif |
| |
| /* PCI config space info */ |
| |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| hw->revision_id = pdev->revision; |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_device_id = pdev->subsystem_device; |
| |
| /* Set capability flags */ |
| rss = min_t(int, IXGBE_MAX_RSS_INDICES, num_online_cpus()); |
| adapter->ring_feature[RING_F_RSS].indices = rss; |
| adapter->flags |= IXGBE_FLAG_RSS_ENABLED; |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| if (hw->device_id == IXGBE_DEV_ID_82598AT) |
| adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; |
| adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598; |
| break; |
| case ixgbe_mac_X540: |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; |
| case ixgbe_mac_82599EB: |
| adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599; |
| adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; |
| adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; |
| if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; |
| /* Flow Director hash filters enabled */ |
| adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| adapter->atr_sample_rate = 20; |
| adapter->ring_feature[RING_F_FDIR].indices = |
| IXGBE_MAX_FDIR_INDICES; |
| adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; |
| #ifdef IXGBE_FCOE |
| adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; |
| adapter->ring_feature[RING_F_FCOE].indices = 0; |
| #ifdef CONFIG_IXGBE_DCB |
| /* Default traffic class to use for FCoE */ |
| adapter->fcoe.up = IXGBE_FCOE_DEFTC; |
| #endif |
| #endif /* IXGBE_FCOE */ |
| break; |
| default: |
| break; |
| } |
| |
| /* n-tuple support exists, always init our spinlock */ |
| spin_lock_init(&adapter->fdir_perfect_lock); |
| |
| #ifdef CONFIG_IXGBE_DCB |
| switch (hw->mac.type) { |
| case ixgbe_mac_X540: |
| adapter->dcb_cfg.num_tcs.pg_tcs = X540_TRAFFIC_CLASS; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = X540_TRAFFIC_CLASS; |
| break; |
| default: |
| adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS; |
| break; |
| } |
| |
| /* Configure DCB traffic classes */ |
| for (j = 0; j < MAX_TRAFFIC_CLASS; j++) { |
| tc = &adapter->dcb_cfg.tc_config[j]; |
| tc->path[DCB_TX_CONFIG].bwg_id = 0; |
| tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1); |
| tc->path[DCB_RX_CONFIG].bwg_id = 0; |
| tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1); |
| tc->dcb_pfc = pfc_disabled; |
| } |
| |
| /* Initialize default user to priority mapping, UPx->TC0 */ |
| tc = &adapter->dcb_cfg.tc_config[0]; |
| tc->path[DCB_TX_CONFIG].up_to_tc_bitmap = 0xFF; |
| tc->path[DCB_RX_CONFIG].up_to_tc_bitmap = 0xFF; |
| |
| adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100; |
| adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100; |
| adapter->dcb_cfg.pfc_mode_enable = false; |
| adapter->dcb_set_bitmap = 0x00; |
| adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; |
| memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, |
| sizeof(adapter->temp_dcb_cfg)); |
| |
| #endif |
| |
| /* default flow control settings */ |
| hw->fc.requested_mode = ixgbe_fc_full; |
| hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */ |
| ixgbe_pbthresh_setup(adapter); |
| hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; |
| hw->fc.send_xon = true; |
| hw->fc.disable_fc_autoneg = false; |
| |
| /* enable itr by default in dynamic mode */ |
| adapter->rx_itr_setting = 1; |
| adapter->tx_itr_setting = 1; |
| |
| /* set default ring sizes */ |
| adapter->tx_ring_count = IXGBE_DEFAULT_TXD; |
| adapter->rx_ring_count = IXGBE_DEFAULT_RXD; |
| |
| /* set default work limits */ |
| adapter->tx_work_limit = IXGBE_DEFAULT_TX_WORK; |
| |
| /* initialize eeprom parameters */ |
| if (ixgbe_init_eeprom_params_generic(hw)) { |
| e_dev_err("EEPROM initialization failed\n"); |
| return -EIO; |
| } |
| |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) |
| * @tx_ring: tx descriptor ring (for a specific queue) to setup |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring) |
| { |
| struct device *dev = tx_ring->dev; |
| int orig_node = dev_to_node(dev); |
| int numa_node = -1; |
| int size; |
| |
| size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; |
| |
| if (tx_ring->q_vector) |
| numa_node = tx_ring->q_vector->numa_node; |
| |
| tx_ring->tx_buffer_info = vzalloc_node(size, numa_node); |
| if (!tx_ring->tx_buffer_info) |
| tx_ring->tx_buffer_info = vzalloc(size); |
| if (!tx_ring->tx_buffer_info) |
| goto err; |
| |
| /* round up to nearest 4K */ |
| tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc); |
| tx_ring->size = ALIGN(tx_ring->size, 4096); |
| |
| set_dev_node(dev, numa_node); |
| tx_ring->desc = dma_alloc_coherent(dev, |
| tx_ring->size, |
| &tx_ring->dma, |
| GFP_KERNEL); |
| set_dev_node(dev, orig_node); |
| if (!tx_ring->desc) |
| tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, |
| &tx_ring->dma, GFP_KERNEL); |
| if (!tx_ring->desc) |
| goto err; |
| |
| tx_ring->next_to_use = 0; |
| tx_ring->next_to_clean = 0; |
| return 0; |
| |
| err: |
| vfree(tx_ring->tx_buffer_info); |
| tx_ring->tx_buffer_info = NULL; |
| dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n"); |
| return -ENOMEM; |
| } |
| |
| /** |
| * ixgbe_setup_all_tx_resources - allocate all queues Tx resources |
| * @adapter: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| err = ixgbe_setup_tx_resources(adapter->tx_ring[i]); |
| if (!err) |
| continue; |
| e_err(probe, "Allocation for Tx Queue %u failed\n", i); |
| break; |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) |
| * @rx_ring: rx descriptor ring (for a specific queue) to setup |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring) |
| { |
| struct device *dev = rx_ring->dev; |
| int orig_node = dev_to_node(dev); |
| int numa_node = -1; |
| int size; |
| |
| size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; |
| |
| if (rx_ring->q_vector) |
| numa_node = rx_ring->q_vector->numa_node; |
| |
| rx_ring->rx_buffer_info = vzalloc_node(size, numa_node); |
| if (!rx_ring->rx_buffer_info) |
| rx_ring->rx_buffer_info = vzalloc(size); |
| if (!rx_ring->rx_buffer_info) |
| goto err; |
| |
| /* Round up to nearest 4K */ |
| rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc); |
| rx_ring->size = ALIGN(rx_ring->size, 4096); |
| |
| set_dev_node(dev, numa_node); |
| rx_ring->desc = dma_alloc_coherent(dev, |
| rx_ring->size, |
| &rx_ring->dma, |
| GFP_KERNEL); |
| set_dev_node(dev, orig_node); |
| if (!rx_ring->desc) |
| rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, |
| &rx_ring->dma, GFP_KERNEL); |
| if (!rx_ring->desc) |
| goto err; |
| |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| |
| ixgbe_init_rx_page_offset(rx_ring); |
| |
| return 0; |
| err: |
| vfree(rx_ring->rx_buffer_info); |
| rx_ring->rx_buffer_info = NULL; |
| dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n"); |
| return -ENOMEM; |
| } |
| |
| /** |
| * ixgbe_setup_all_rx_resources - allocate all queues Rx resources |
| * @adapter: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| err = ixgbe_setup_rx_resources(adapter->rx_ring[i]); |
| if (!err) |
| continue; |
| e_err(probe, "Allocation for Rx Queue %u failed\n", i); |
| break; |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ixgbe_free_tx_resources - Free Tx Resources per Queue |
| * @tx_ring: Tx descriptor ring for a specific queue |
| * |
| * Free all transmit software resources |
| **/ |
| void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring) |
| { |
| ixgbe_clean_tx_ring(tx_ring); |
| |
| vfree(tx_ring->tx_buffer_info); |
| tx_ring->tx_buffer_info = NULL; |
| |
| /* if not set, then don't free */ |
| if (!tx_ring->desc) |
| return; |
| |
| dma_free_coherent(tx_ring->dev, tx_ring->size, |
| tx_ring->desc, tx_ring->dma); |
| |
| tx_ring->desc = NULL; |
| } |
| |
| /** |
| * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| **/ |
| static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| if (adapter->tx_ring[i]->desc) |
| ixgbe_free_tx_resources(adapter->tx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_free_rx_resources - Free Rx Resources |
| * @rx_ring: ring to clean the resources from |
| * |
| * Free all receive software resources |
| **/ |
| void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring) |
| { |
| ixgbe_clean_rx_ring(rx_ring); |
| |
| vfree(rx_ring->rx_buffer_info); |
| rx_ring->rx_buffer_info = NULL; |
| |
| /* if not set, then don't free */ |
| if (!rx_ring->desc) |
| return; |
| |
| dma_free_coherent(rx_ring->dev, rx_ring->size, |
| rx_ring->desc, rx_ring->dma); |
| |
| rx_ring->desc = NULL; |
| } |
| |
| /** |
| * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all receive software resources |
| **/ |
| static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| if (adapter->rx_ring[i]->desc) |
| ixgbe_free_rx_resources(adapter->rx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; |
| |
| /* MTU < 68 is an error and causes problems on some kernels */ |
| if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) |
| return -EINVAL; |
| |
| /* |
| * For 82599EB we cannot allow PF to change MTU greater than 1500 |
| * in SR-IOV mode as it may cause buffer overruns in guest VFs that |
| * don't allocate and chain buffers correctly. |
| */ |
| if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && |
| (adapter->hw.mac.type == ixgbe_mac_82599EB) && |
| (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE)) |
| return -EINVAL; |
| |
| e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); |
| |
| /* must set new MTU before calling down or up */ |
| netdev->mtu = new_mtu; |
| |
| if (netif_running(netdev)) |
| ixgbe_reinit_locked(adapter); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| **/ |
| static int ixgbe_open(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int err; |
| |
| /* disallow open during test */ |
| if (test_bit(__IXGBE_TESTING, &adapter->state)) |
| return -EBUSY; |
| |
| netif_carrier_off(netdev); |
| |
| /* allocate transmit descriptors */ |
| err = ixgbe_setup_all_tx_resources(adapter); |
| if (err) |
| goto err_setup_tx; |
| |
| /* allocate receive descriptors */ |
| err = ixgbe_setup_all_rx_resources(adapter); |
| if (err) |
| goto err_setup_rx; |
| |
| ixgbe_configure(adapter); |
| |
| err = ixgbe_request_irq(adapter); |
| if (err) |
| goto err_req_irq; |
| |
| ixgbe_up_complete(adapter); |
| |
| return 0; |
| |
| err_req_irq: |
| err_setup_rx: |
| ixgbe_free_all_rx_resources(adapter); |
| err_setup_tx: |
| ixgbe_free_all_tx_resources(adapter); |
| ixgbe_reset(adapter); |
| |
| return err; |
| } |
| |
| /** |
| * ixgbe_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| **/ |
| static int ixgbe_close(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| ixgbe_down(adapter); |
| ixgbe_free_irq(adapter); |
| |
| ixgbe_fdir_filter_exit(adapter); |
| |
| ixgbe_free_all_tx_resources(adapter); |
| ixgbe_free_all_rx_resources(adapter); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ixgbe_resume(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| u32 err; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| /* |
| * pci_restore_state clears dev->state_saved so call |
| * pci_save_state to restore it. |
| */ |
| pci_save_state(pdev); |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) { |
| e_dev_err("Cannot enable PCI device from suspend\n"); |
| return err; |
| } |
| pci_set_master(pdev); |
| |
| pci_wake_from_d3(pdev, false); |
| |
| rtnl_lock(); |
| err = ixgbe_init_interrupt_scheme(adapter); |
| rtnl_unlock(); |
| if (err) { |
| e_dev_err("Cannot initialize interrupts for device\n"); |
| return err; |
| } |
| |
| ixgbe_reset(adapter); |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); |
| |
| if (netif_running(netdev)) { |
| err = ixgbe_open(netdev); |
| if (err) |
| return err; |
| } |
| |
| netif_device_attach(netdev); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 ctrl, fctrl; |
| u32 wufc = adapter->wol; |
| #ifdef CONFIG_PM |
| int retval = 0; |
| #endif |
| |
| netif_device_detach(netdev); |
| |
| if (netif_running(netdev)) { |
| rtnl_lock(); |
| ixgbe_down(adapter); |
| ixgbe_free_irq(adapter); |
| ixgbe_free_all_tx_resources(adapter); |
| ixgbe_free_all_rx_resources(adapter); |
| rtnl_unlock(); |
| } |
| |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| #ifdef CONFIG_PM |
| retval = pci_save_state(pdev); |
| if (retval) |
| return retval; |
| |
| #endif |
| if (wufc) { |
| ixgbe_set_rx_mode(netdev); |
| |
| /* |
| * enable the optics for both mult-speed fiber and |
| * 82599 SFP+ fiber as we can WoL. |
| */ |
| if (hw->mac.ops.enable_tx_laser && |
| (hw->phy.multispeed_fiber || |
| (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber && |
| hw->mac.type == ixgbe_mac_82599EB))) |
| hw->mac.ops.enable_tx_laser(hw); |
| |
| /* turn on all-multi mode if wake on multicast is enabled */ |
| if (wufc & IXGBE_WUFC_MC) { |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| fctrl |= IXGBE_FCTRL_MPE; |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); |
| } |
| |
| ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); |
| ctrl |= IXGBE_CTRL_GIO_DIS; |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc); |
| } else { |
| IXGBE_WRITE_REG(hw, IXGBE_WUC, 0); |
| IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0); |
| } |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| pci_wake_from_d3(pdev, false); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| pci_wake_from_d3(pdev, !!wufc); |
| break; |
| default: |
| break; |
| } |
| |
| *enable_wake = !!wufc; |
| |
| ixgbe_release_hw_control(adapter); |
| |
| pci_disable_device(pdev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| int retval; |
| bool wake; |
| |
| retval = __ixgbe_shutdown(pdev, &wake); |
| if (retval) |
| return retval; |
| |
| if (wake) { |
| pci_prepare_to_sleep(pdev); |
| } else { |
| pci_wake_from_d3(pdev, false); |
| pci_set_power_state(pdev, PCI_D3hot); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static void ixgbe_shutdown(struct pci_dev *pdev) |
| { |
| bool wake; |
| |
| __ixgbe_shutdown(pdev, &wake); |
| |
| if (system_state == SYSTEM_POWER_OFF) { |
| pci_wake_from_d3(pdev, wake); |
| pci_set_power_state(pdev, PCI_D3hot); |
| } |
| } |
| |
| /** |
| * ixgbe_update_stats - Update the board statistics counters. |
| * @adapter: board private structure |
| **/ |
| void ixgbe_update_stats(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; |
| u64 total_mpc = 0; |
| u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; |
| u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0; |
| u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0; |
| u64 bytes = 0, packets = 0, hw_csum_rx_error = 0; |
| #ifdef IXGBE_FCOE |
| struct ixgbe_fcoe *fcoe = &adapter->fcoe; |
| unsigned int cpu; |
| u64 fcoe_noddp_counts_sum = 0, fcoe_noddp_ext_buff_counts_sum = 0; |
| #endif /* IXGBE_FCOE */ |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { |
| u64 rsc_count = 0; |
| u64 rsc_flush = 0; |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count; |
| rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush; |
| } |
| adapter->rsc_total_count = rsc_count; |
| adapter->rsc_total_flush = rsc_flush; |
| } |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| struct ixgbe_ring *rx_ring = adapter->rx_ring[i]; |
| non_eop_descs += rx_ring->rx_stats.non_eop_descs; |
| alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed; |
| alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed; |
| hw_csum_rx_error += rx_ring->rx_stats.csum_err; |
| bytes += rx_ring->stats.bytes; |
| packets += rx_ring->stats.packets; |
| } |
| adapter->non_eop_descs = non_eop_descs; |
| adapter->alloc_rx_page_failed = alloc_rx_page_failed; |
| adapter->alloc_rx_buff_failed = alloc_rx_buff_failed; |
| adapter->hw_csum_rx_error = hw_csum_rx_error; |
| netdev->stats.rx_bytes = bytes; |
| netdev->stats.rx_packets = packets; |
| |
| bytes = 0; |
| packets = 0; |
| /* gather some stats to the adapter struct that are per queue */ |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; |
| restart_queue += tx_ring->tx_stats.restart_queue; |
| tx_busy += tx_ring->tx_stats.tx_busy; |
| bytes += tx_ring->stats.bytes; |
| packets += tx_ring->stats.packets; |
| } |
| adapter->restart_queue = restart_queue; |
| adapter->tx_busy = tx_busy; |
| netdev->stats.tx_bytes = bytes; |
| netdev->stats.tx_packets = packets; |
| |
| hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); |
| |
| /* 8 register reads */ |
| for (i = 0; i < 8; i++) { |
| /* for packet buffers not used, the register should read 0 */ |
| mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i)); |
| missed_rx += mpc; |
| hwstats->mpc[i] += mpc; |
| total_mpc += hwstats->mpc[i]; |
| hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); |
| hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); |
| hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i)); |
| hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i)); |
| hwstats->pxonrxc[i] += |
| IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| hwstats->pxonrxc[i] += |
| IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /*16 register reads */ |
| for (i = 0; i < 16; i++) { |
| hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i)); |
| hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i)); |
| if ((hw->mac.type == ixgbe_mac_82599EB) || |
| (hw->mac.type == ixgbe_mac_X540)) { |
| hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); |
| IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */ |
| hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); |
| IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */ |
| } |
| } |
| |
| hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); |
| /* work around hardware counting issue */ |
| hwstats->gprc -= missed_rx; |
| |
| ixgbe_update_xoff_received(adapter); |
| |
| /* 82598 hardware only has a 32 bit counter in the high register */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); |
| hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); |
| hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); |
| hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH); |
| break; |
| case ixgbe_mac_X540: |
| /* OS2BMC stats are X540 only*/ |
| hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC); |
| hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC); |
| hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC); |
| hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC); |
| case ixgbe_mac_82599EB: |
| for (i = 0; i < 16; i++) |
| adapter->hw_rx_no_dma_resources += |
| IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); |
| hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); |
| IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ |
| hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); |
| IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ |
| hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL); |
| IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ |
| hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); |
| hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); |
| hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS); |
| #ifdef IXGBE_FCOE |
| hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC); |
| hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC); |
| hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC); |
| hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC); |
| hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC); |
| hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC); |
| /* Add up per cpu counters for total ddp aloc fail */ |
| if (fcoe->pcpu_noddp && fcoe->pcpu_noddp_ext_buff) { |
| for_each_possible_cpu(cpu) { |
| fcoe_noddp_counts_sum += |
| *per_cpu_ptr(fcoe->pcpu_noddp, cpu); |
| fcoe_noddp_ext_buff_counts_sum += |
| *per_cpu_ptr(fcoe-> |
| pcpu_noddp_ext_buff, cpu); |
| } |
| } |
| hwstats->fcoe_noddp = fcoe_noddp_counts_sum; |
| hwstats->fcoe_noddp_ext_buff = fcoe_noddp_ext_buff_counts_sum; |
| #endif /* IXGBE_FCOE */ |
| break; |
| default: |
| break; |
| } |
| bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); |
| hwstats->bprc += bprc; |
| hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| hwstats->mprc -= bprc; |
| hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC); |
| hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); |
| hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); |
| hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); |
| hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); |
| hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); |
| hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); |
| hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); |
| lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); |
| hwstats->lxontxc += lxon; |
| lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); |
| hwstats->lxofftxc += lxoff; |
| hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); |
| hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); |
| /* |
| * 82598 errata - tx of flow control packets is included in tx counters |
| */ |
| xon_off_tot = lxon + lxoff; |
| hwstats->gptc -= xon_off_tot; |
| hwstats->mptc -= xon_off_tot; |
| hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN)); |
| hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC); |
| hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC); |
| hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC); |
| hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR); |
| hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); |
| hwstats->ptc64 -= xon_off_tot; |
| hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); |
| hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); |
| hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); |
| hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); |
| hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); |
| hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); |
| |
| /* Fill out the OS statistics structure */ |
| netdev->stats.multicast = hwstats->mprc; |
| |
| /* Rx Errors */ |
| netdev->stats.rx_errors = hwstats->crcerrs + hwstats->rlec; |
| netdev->stats.rx_dropped = 0; |
| netdev->stats.rx_length_errors = hwstats->rlec; |
| netdev->stats.rx_crc_errors = hwstats->crcerrs; |
| netdev->stats.rx_missed_errors = total_mpc; |
| } |
| |
| /** |
| * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table |
| * @adapter - pointer to the device adapter structure |
| **/ |
| static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT; |
| |
| /* if interface is down do nothing */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return; |
| |
| /* do nothing if we are not using signature filters */ |
| if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) |
| return; |
| |
| adapter->fdir_overflow++; |
| |
| if (ixgbe_reinit_fdir_tables_82599(hw) == 0) { |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| set_bit(__IXGBE_TX_FDIR_INIT_DONE, |
| &(adapter->tx_ring[i]->state)); |
| /* re-enable flow director interrupts */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR); |
| } else { |
| e_err(probe, "failed to finish FDIR re-initialization, " |
| "ignored adding FDIR ATR filters\n"); |
| } |
| } |
| |
| /** |
| * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts |
| * @adapter - pointer to the device adapter structure |
| * |
| * This function serves two purposes. First it strobes the interrupt lines |
| * in order to make certain interrupts are occurring. Secondly it sets the |
| * bits needed to check for TX hangs. As a result we should immediately |
| * determine if a hang has occurred. |
| */ |
| static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u64 eics = 0; |
| int i; |
| |
| /* If we're down or resetting, just bail */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| /* Force detection of hung controller */ |
| if (netif_carrier_ok(adapter->netdev)) { |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| set_check_for_tx_hang(adapter->tx_ring[i]); |
| } |
| |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { |
| /* |
| * for legacy and MSI interrupts don't set any bits |
| * that are enabled for EIAM, because this operation |
| * would set *both* EIMS and EICS for any bit in EIAM |
| */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICS, |
| (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); |
| } else { |
| /* get one bit for every active tx/rx interrupt vector */ |
| for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) { |
| struct ixgbe_q_vector *qv = adapter->q_vector[i]; |
| if (qv->rx.ring || qv->tx.ring) |
| eics |= ((u64)1 << i); |
| } |
| } |
| |
| /* Cause software interrupt to ensure rings are cleaned */ |
| ixgbe_irq_rearm_queues(adapter, eics); |
| |
| } |
| |
| /** |
| * ixgbe_watchdog_update_link - update the link status |
| * @adapter - pointer to the device adapter structure |
| * @link_speed - pointer to a u32 to store the link_speed |
| **/ |
| static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 link_speed = adapter->link_speed; |
| bool link_up = adapter->link_up; |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; |
| |
| if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) |
| return; |
| |
| if (hw->mac.ops.check_link) { |
| hw->mac.ops.check_link(hw, &link_speed, &link_up, false); |
| } else { |
| /* always assume link is up, if no check link function */ |
| link_speed = IXGBE_LINK_SPEED_10GB_FULL; |
| link_up = true; |
| } |
| |
| if (adapter->ixgbe_ieee_pfc) |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); |
| |
| if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en)) { |
| hw->mac.ops.fc_enable(hw); |
| ixgbe_set_rx_drop_en(adapter); |
| } |
| |
| if (link_up || |
| time_after(jiffies, (adapter->link_check_timeout + |
| IXGBE_TRY_LINK_TIMEOUT))) { |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| adapter->link_up = link_up; |
| adapter->link_speed = link_speed; |
| } |
| |
| /** |
| * ixgbe_watchdog_link_is_up - update netif_carrier status and |
| * print link up message |
| * @adapter - pointer to the device adapter structure |
| **/ |
| static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 link_speed = adapter->link_speed; |
| bool flow_rx, flow_tx; |
| |
| /* only continue if link was previously down */ |
| if (netif_carrier_ok(netdev)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: { |
| u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); |
| flow_rx = !!(frctl & IXGBE_FCTRL_RFCE); |
| flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X); |
| } |
| break; |
| case ixgbe_mac_X540: |
| case ixgbe_mac_82599EB: { |
| u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); |
| u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG); |
| flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE); |
| flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X); |
| } |
| break; |
| default: |
| flow_tx = false; |
| flow_rx = false; |
| break; |
| } |
| |
| #ifdef CONFIG_IXGBE_PTP |
| ixgbe_ptp_start_cyclecounter(adapter); |
| #endif |
| |
| e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", |
| (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? |
| "10 Gbps" : |
| (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? |
| "1 Gbps" : |
| (link_speed == IXGBE_LINK_SPEED_100_FULL ? |
| "100 Mbps" : |
| "unknown speed"))), |
| ((flow_rx && flow_tx) ? "RX/TX" : |
| (flow_rx ? "RX" : |
| (flow_tx ? "TX" : "None")))); |
| |
| netif_carrier_on(netdev); |
| ixgbe_check_vf_rate_limit(adapter); |
| } |
| |
| /** |
| * ixgbe_watchdog_link_is_down - update netif_carrier status and |
| * print link down message |
| * @adapter - pointer to the adapter structure |
| **/ |
| static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| adapter->link_up = false; |
| adapter->link_speed = 0; |
| |
| /* only continue if link was up previously */ |
| if (!netif_carrier_ok(netdev)) |
| return; |
| |
| /* poll for SFP+ cable when link is down */ |
| if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB) |
| adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; |
| |
| #ifdef CONFIG_IXGBE_PTP |
| ixgbe_ptp_start_cyclecounter(adapter); |
| #endif |
| |
| e_info(drv, "NIC Link is Down\n"); |
| netif_carrier_off(netdev); |
| } |
| |
| /** |
| * ixgbe_watchdog_flush_tx - flush queues on link down |
| * @adapter - pointer to the device adapter structure |
| **/ |
| static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| int some_tx_pending = 0; |
| |
| if (!netif_carrier_ok(adapter->netdev)) { |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; |
| if (tx_ring->next_to_use != tx_ring->next_to_clean) { |
| some_tx_pending = 1; |
| break; |
| } |
| } |
| |
| if (some_tx_pending) { |
| /* We've lost link, so the controller stops DMA, |
| * but we've got queued Tx work that's never going |
| * to get done, so reset controller to flush Tx. |
| * (Do the reset outside of interrupt context). |
| */ |
| adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; |
| } |
| } |
| } |
| |
| static void ixgbe_spoof_check(struct ixgbe_adapter *adapter) |
| { |
| u32 ssvpc; |
| |
| /* Do not perform spoof check for 82598 */ |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC); |
| |
| /* |
| * ssvpc register is cleared on read, if zero then no |
| * spoofed packets in the last interval. |
| */ |
| if (!ssvpc) |
| return; |
| |
| e_warn(drv, "%d Spoofed packets detected\n", ssvpc); |
| } |
| |
| /** |
| * ixgbe_watchdog_subtask - check and bring link up |
| * @adapter - pointer to the device adapter structure |
| **/ |
| static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter) |
| { |
| /* if interface is down do nothing */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| ixgbe_watchdog_update_link(adapter); |
| |
| if (adapter->link_up) |
| ixgbe_watchdog_link_is_up(adapter); |
| else |
| ixgbe_watchdog_link_is_down(adapter); |
| |
| ixgbe_spoof_check(adapter); |
| ixgbe_update_stats(adapter); |
| |
| ixgbe_watchdog_flush_tx(adapter); |
| } |
| |
| /** |
| * ixgbe_sfp_detection_subtask - poll for SFP+ cable |
| * @adapter - the ixgbe adapter structure |
| **/ |
| static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| s32 err; |
| |
| /* not searching for SFP so there is nothing to do here */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) && |
| !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) |
| return; |
| |
| /* someone else is in init, wait until next service event */ |
| if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) |
| return; |
| |
| err = hw->phy.ops.identify_sfp(hw); |
| if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) |
| goto sfp_out; |
| |
| if (err == IXGBE_ERR_SFP_NOT_PRESENT) { |
| /* If no cable is present, then we need to reset |
| * the next time we find a good cable. */ |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; |
| } |
| |
| /* exit on error */ |
| if (err) |
| goto sfp_out; |
| |
| /* exit if reset not needed */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) |
| goto sfp_out; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET; |
| |
| /* |
| * A module may be identified correctly, but the EEPROM may not have |
| * support for that module. setup_sfp() will fail in that case, so |
| * we should not allow that module to load. |
| */ |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| err = hw->phy.ops.reset(hw); |
| else |
| err = hw->mac.ops.setup_sfp(hw); |
| |
| if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) |
| goto sfp_out; |
| |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; |
| e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); |
| |
| sfp_out: |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); |
| |
| if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && |
| (adapter->netdev->reg_state == NETREG_REGISTERED)) { |
| e_dev_err("failed to initialize because an unsupported " |
| "SFP+ module type was detected.\n"); |
| e_dev_err("Reload the driver after installing a " |
| "supported module.\n"); |
| unregister_netdev(adapter->netdev); |
| } |
| } |
| |
| /** |
| * ixgbe_sfp_link_config_subtask - set up link SFP after module install |
| * @adapter - the ixgbe adapter structure |
| **/ |
| static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 autoneg; |
| bool negotiation; |
| |
| if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) |
| return; |
| |
| /* someone else is in init, wait until next service event */ |
| if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) |
| return; |
| |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; |
| |
| autoneg = hw->phy.autoneg_advertised; |
| if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) |
| hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); |
| if (hw->mac.ops.setup_link) |
| hw->mac.ops.setup_link(hw, autoneg, negotiation, true); |
| |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; |
| adapter->link_check_timeout = jiffies; |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter) |
| { |
| int vf; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| u32 gpc; |
| u32 ciaa, ciad; |
| |
| gpc = IXGBE_READ_REG(hw, IXGBE_TXDGPC); |
| if (gpc) /* If incrementing then no need for the check below */ |
| return; |
| /* |
| * Check to see if a bad DMA write target from an errant or |
| * malicious VF has caused a PCIe error. If so then we can |
| * issue a VFLR to the offending VF(s) and then resume without |
| * requesting a full slot reset. |
| */ |
| |
| for (vf = 0; vf < adapter->num_vfs; vf++) { |
| ciaa = (vf << 16) | 0x80000000; |
| /* 32 bit read so align, we really want status at offset 6 */ |
| ciaa |= PCI_COMMAND; |
| IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); |
| ciad = IXGBE_READ_REG(hw, IXGBE_CIAD_82599); |
| ciaa &= 0x7FFFFFFF; |
| /* disable debug mode asap after reading data */ |
| IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); |
| /* Get the upper 16 bits which will be the PCI status reg */ |
| ciad >>= 16; |
| if (ciad & PCI_STATUS_REC_MASTER_ABORT) { |
| netdev_err(netdev, "VF %d Hung DMA\n", vf); |
| /* Issue VFLR */ |
| ciaa = (vf << 16) | 0x80000000; |
| ciaa |= 0xA8; |
| IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); |
| ciad = 0x00008000; /* VFLR */ |
| IXGBE_WRITE_REG(hw, IXGBE_CIAD_82599, ciad); |
| ciaa &= 0x7FFFFFFF; |
| IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); |
| } |
| } |
| } |
| |
| #endif |
| /** |
| * ixgbe_service_timer - Timer Call-back |
| * @data: pointer to adapter cast into an unsigned long |
| **/ |
| static void ixgbe_service_timer(unsigned long data) |
| { |
| struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; |
| unsigned long next_event_offset; |
| bool ready = true; |
| |
| /* poll faster when waiting for link */ |
| if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) |
| next_event_offset = HZ / 10; |
| else |
| next_event_offset = HZ * 2; |
| |
| #ifdef CONFIG_PCI_IOV |
| /* |
| * don't bother with SR-IOV VF DMA hang check if there are |
| * no VFs or the link is down |
| */ |
| if (!adapter->num_vfs || |
| (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) |
| goto normal_timer_service; |
| |
| /* If we have VFs allocated then we must check for DMA hangs */ |
| ixgbe_check_for_bad_vf(adapter); |
| next_event_offset = HZ / 50; |
| adapter->timer_event_accumulator++; |
| |
| if (adapter->timer_event_accumulator >= 100) |
| adapter->timer_event_accumulator = 0; |
| else |
| ready = false; |
| |
| normal_timer_service: |
| #endif |
| /* Reset the timer */ |
| mod_timer(&adapter->service_timer, next_event_offset + jiffies); |
| |
| if (ready) |
| ixgbe_service_event_schedule(adapter); |
| } |
| |
| static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) |
| { |
| if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED; |
| |
| /* If we're already down or resetting, just bail */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| ixgbe_dump(adapter); |
| netdev_err(adapter->netdev, "Reset adapter\n"); |
| adapter->tx_timeout_count++; |
| |
| ixgbe_reinit_locked(adapter); |
| } |
| |
| /** |
| * ixgbe_service_task - manages and runs subtasks |
| * @work: pointer to work_struct containing our data |
| **/ |
| static void ixgbe_service_task(struct work_struct *work) |
| { |
| struct ixgbe_adapter *adapter = container_of(work, |
| struct ixgbe_adapter, |
| service_task); |
| |
| ixgbe_reset_subtask(adapter); |
| ixgbe_sfp_detection_subtask(adapter); |
| ixgbe_sfp_link_config_subtask(adapter); |
| ixgbe_check_overtemp_subtask(adapter); |
| ixgbe_watchdog_subtask(adapter); |
| ixgbe_fdir_reinit_subtask(adapter); |
| ixgbe_check_hang_subtask(adapter); |
| #ifdef CONFIG_IXGBE_PTP |
| ixgbe_ptp_overflow_check(adapter); |
| #endif |
| |
| ixgbe_service_event_complete(adapter); |
| } |
| |
| static int ixgbe_tso(struct ixgbe_ring *tx_ring, |
| struct ixgbe_tx_buffer *first, |
| u8 *hdr_len) |
| { |
| struct sk_buff *skb = first->skb; |
| u32 vlan_macip_lens, type_tucmd; |
| u32 mss_l4len_idx, l4len; |
| |
| if (!skb_is_gso(skb)) |
| return 0; |
| |
| if (skb_header_cloned(skb)) { |
| int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
| if (err) |
| return err; |
| } |
| |
| /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ |
| type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| |
| if (first->protocol == __constant_htons(ETH_P_IP)) { |
| struct iphdr *iph = ip_hdr(skb); |
| iph->tot_len = 0; |
| iph->check = 0; |
| tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, |
| iph->daddr, 0, |
| IPPROTO_TCP, |
| 0); |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; |
| first->tx_flags |= IXGBE_TX_FLAGS_TSO | |
| IXGBE_TX_FLAGS_CSUM | |
| IXGBE_TX_FLAGS_IPV4; |
| } else if (skb_is_gso_v6(skb)) { |
| ipv6_hdr(skb)->payload_len = 0; |
| tcp_hdr(skb)->check = |
| ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, |
| &ipv6_hdr(skb)->daddr, |
| 0, IPPROTO_TCP, 0); |
| first->tx_flags |= IXGBE_TX_FLAGS_TSO | |
| IXGBE_TX_FLAGS_CSUM; |
| } |
| |
| /* compute header lengths */ |
| l4len = tcp_hdrlen(skb); |
| *hdr_len = skb_transport_offset(skb) + l4len; |
| |
| /* update gso size and bytecount with header size */ |
| first->gso_segs = skb_shinfo(skb)->gso_segs; |
| first->bytecount += (first->gso_segs - 1) * *hdr_len; |
| |
| /* mss_l4len_id: use 1 as index for TSO */ |
| mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT; |
| mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; |
| mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT; |
| |
| /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ |
| vlan_macip_lens = skb_network_header_len(skb); |
| vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT; |
| vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; |
| |
| ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd, |
| mss_l4len_idx); |
| |
| return 1; |
| } |
| |
| static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, |
| struct ixgbe_tx_buffer *first) |
| { |
| struct sk_buff *skb = first->skb; |
| u32 vlan_macip_lens = 0; |
| u32 mss_l4len_idx = 0; |
| u32 type_tucmd = 0; |
| |
| if (skb->ip_summed != CHECKSUM_PARTIAL) { |
| if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN) && |
| !(first->tx_flags & IXGBE_TX_FLAGS_TXSW)) |
| return; |
| } else { |
| u8 l4_hdr = 0; |
| switch (first->protocol) { |
| case __constant_htons(ETH_P_IP): |
| vlan_macip_lens |= skb_network_header_len(skb); |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; |
| l4_hdr = ip_hdr(skb)->protocol; |
| break; |
| case __constant_htons(ETH_P_IPV6): |
| vlan_macip_lens |= skb_network_header_len(skb); |
| l4_hdr = ipv6_hdr(skb)->nexthdr; |
| break; |
| default: |
| if (unlikely(net_ratelimit())) { |
| dev_warn(tx_ring->dev, |
| "partial checksum but proto=%x!\n", |
| first->protocol); |
| } |
| break; |
| } |
| |
| switch (l4_hdr) { |
| case IPPROTO_TCP: |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| mss_l4len_idx = tcp_hdrlen(skb) << |
| IXGBE_ADVTXD_L4LEN_SHIFT; |
| break; |
| case IPPROTO_SCTP: |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_SCTP; |
| mss_l4len_idx = sizeof(struct sctphdr) << |
| IXGBE_ADVTXD_L4LEN_SHIFT; |
| break; |
| case IPPROTO_UDP: |
| mss_l4len_idx = sizeof(struct udphdr) << |
| IXGBE_ADVTXD_L4LEN_SHIFT; |
| break; |
| default: |
| if (unlikely(net_ratelimit())) { |
| dev_warn(tx_ring->dev, |
| "partial checksum but l4 proto=%x!\n", |
| l4_hdr); |
| } |
| break; |
| } |
| |
| /* update TX checksum flag */ |
| first->tx_flags |= IXGBE_TX_FLAGS_CSUM; |
| } |
| |
| /* vlan_macip_lens: MACLEN, VLAN tag */ |
| vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT; |
| vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; |
| |
| ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, |
| type_tucmd, mss_l4len_idx); |
| } |
| |
| static __le32 ixgbe_tx_cmd_type(u32 tx_flags) |
| { |
| /* set type for advanced descriptor with frame checksum insertion */ |
| __le32 cmd_type = cpu_to_le32(IXGBE_ADVTXD_DTYP_DATA | |
| IXGBE_ADVTXD_DCMD_IFCS | |
| IXGBE_ADVTXD_DCMD_DEXT); |
| |
| /* set HW vlan bit if vlan is present */ |
| if (tx_flags & IXGBE_TX_FLAGS_HW_VLAN) |
| cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_VLE); |
| |
| #ifdef CONFIG_IXGBE_PTP |
| if (tx_flags & IXGBE_TX_FLAGS_TSTAMP) |
| cmd_type |= cpu_to_le32(IXGBE_ADVTXD_MAC_TSTAMP); |
| #endif |
| |
| /* set segmentation enable bits for TSO/FSO */ |
| #ifdef IXGBE_FCOE |
| if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FSO)) |
| #else |
| if (tx_flags & IXGBE_TX_FLAGS_TSO) |
| #endif |
| cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_TSE); |
| |
| return cmd_type; |
| } |
| |
| static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc, |
| u32 tx_flags, unsigned int paylen) |
| { |
| __le32 olinfo_status = cpu_to_le32(paylen << IXGBE_ADVTXD_PAYLEN_SHIFT); |
| |
| /* enable L4 checksum for TSO and TX checksum offload */ |
| if (tx_flags & IXGBE_TX_FLAGS_CSUM) |
| olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_TXSM); |
| |
| /* enble IPv4 checksum for TSO */ |
| if (tx_flags & IXGBE_TX_FLAGS_IPV4) |
| olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_IXSM); |
| |
| /* use index 1 context for TSO/FSO/FCOE */ |
| #ifdef IXGBE_FCOE |
| if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FCOE)) |
| #else |
| if (tx_flags & IXGBE_TX_FLAGS_TSO) |
| #endif |
| olinfo_status |= cpu_to_le32(1 << IXGBE_ADVTXD_IDX_SHIFT); |
| |
| /* |
| * Check Context must be set if Tx switch is enabled, which it |
| * always is for case where virtual functions are running |
| */ |
| #ifdef IXGBE_FCOE |
| if (tx_flags & (IXGBE_TX_FLAGS_TXSW | IXGBE_TX_FLAGS_FCOE)) |
| #else |
| if (tx_flags & IXGBE_TX_FLAGS_TXSW) |
| #endif |
| olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_CC); |
| |
| tx_desc->read.olinfo_status = olinfo_status; |
| } |
| |
| #define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ |
| IXGBE_TXD_CMD_RS) |
| |
| static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, |
| struct ixgbe_tx_buffer *first, |
| const u8 hdr_len) |
| { |
| dma_addr_t dma; |
| struct sk_buff *skb = first->skb; |
| struct ixgbe_tx_buffer *tx_buffer; |
| union ixgbe_adv_tx_desc *tx_desc; |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; |
| unsigned int data_len = skb->data_len; |
| unsigned int size = skb_headlen(skb); |
| unsigned int paylen = skb->len - hdr_len; |
| u32 tx_flags = first->tx_flags; |
| __le32 cmd_type; |
| u16 i = tx_ring->next_to_use; |
| |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); |
| |
| ixgbe_tx_olinfo_status(tx_desc, tx_flags, paylen); |
| cmd_type = ixgbe_tx_cmd_type(tx_flags); |
| |
| #ifdef IXGBE_FCOE |
| if (tx_flags & IXGBE_TX_FLAGS_FCOE) { |
| if (data_len < sizeof(struct fcoe_crc_eof)) { |
| size -= sizeof(struct fcoe_crc_eof) - data_len; |
| data_len = 0; |
| } else { |
| data_len -= sizeof(struct fcoe_crc_eof); |
| } |
| } |
| |
| #endif |
| dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); |
| if (dma_mapping_error(tx_ring->dev, dma)) |
| goto dma_error; |
| |
| /* record length, and DMA address */ |
| dma_unmap_len_set(first, len, size); |
| dma_unmap_addr_set(first, dma, dma); |
| |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); |
| |
| for (;;) { |
| while (unlikely(size > IXGBE_MAX_DATA_PER_TXD)) { |
| tx_desc->read.cmd_type_len = |
| cmd_type | cpu_to_le32(IXGBE_MAX_DATA_PER_TXD); |
| |
| i++; |
| tx_desc++; |
| if (i == tx_ring->count) { |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| i = 0; |
| } |
| |
| dma += IXGBE_MAX_DATA_PER_TXD; |
| size -= IXGBE_MAX_DATA_PER_TXD; |
| |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); |
| tx_desc->read.olinfo_status = 0; |
| } |
| |
| if (likely(!data_len)) |
| break; |
| |
| if (unlikely(skb->no_fcs)) |
| cmd_type &= ~(cpu_to_le32(IXGBE_ADVTXD_DCMD_IFCS)); |
| tx_desc->read.cmd_type_len = cmd_type | cpu_to_le32(size); |
| |
| i++; |
| tx_desc++; |
| if (i == tx_ring->count) { |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| i = 0; |
| } |
| |
| #ifdef IXGBE_FCOE |
| size = min_t(unsigned int, data_len, skb_frag_size(frag)); |
| #else |
| size = skb_frag_size(frag); |
| #endif |
| data_len -= size; |
| |
| dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(tx_ring->dev, dma)) |
| goto dma_error; |
| |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| dma_unmap_len_set(tx_buffer, len, size); |
| dma_unmap_addr_set(tx_buffer, dma, dma); |
| |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); |
| tx_desc->read.olinfo_status = 0; |
| |
| frag++; |
| } |
| |
| /* write last descriptor with RS and EOP bits */ |
| cmd_type |= cpu_to_le32(size) | cpu_to_le32(IXGBE_TXD_CMD); |
| tx_desc->read.cmd_type_len = cmd_type; |
| |
| netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); |
| |
| /* set the timestamp */ |
| first->time_stamp = jiffies; |
| |
| /* |
| * Force memory writes to complete before letting h/w know there |
| * are new descriptors to fetch. (Only applicable for weak-ordered |
| * memory model archs, such as IA-64). |
| * |
| * We also need this memory barrier to make certain all of the |
| * status bits have been updated before next_to_watch is written. |
| */ |
| wmb(); |
| |
| /* set next_to_watch value indicating a packet is present */ |
| first->next_to_watch = tx_desc; |
| |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| |
| tx_ring->next_to_use = i; |
| |
| /* notify HW of packet */ |
| writel(i, tx_ring->tail); |
| |
| return; |
| dma_error: |
| dev_err(tx_ring->dev, "TX DMA map failed\n"); |
| |
| /* clear dma mappings for failed tx_buffer_info map */ |
| for (;;) { |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer); |
| if (tx_buffer == first) |
| break; |
| if (i == 0) |
| i = tx_ring->count; |
| i--; |
| } |
| |
| tx_ring->next_to_use = i; |
| } |
| |
| static void ixgbe_atr(struct ixgbe_ring *ring, |
| struct ixgbe_tx_buffer *first) |
| { |
| struct ixgbe_q_vector *q_vector = ring->q_vector; |
| union ixgbe_atr_hash_dword input = { .dword = 0 }; |
| union ixgbe_atr_hash_dword common = { .dword = 0 }; |
| union { |
| unsigned char *network; |
| struct iphdr *ipv4; |
| struct ipv6hdr *ipv6; |
| } hdr; |
| struct tcphdr *th; |
| __be16 vlan_id; |
| |
| /* if ring doesn't have a interrupt vector, cannot perform ATR */ |
| if (!q_vector) |
| return; |
| |
| /* do nothing if sampling is disabled */ |
| if (!ring->atr_sample_rate) |
| return; |
| |
| ring->atr_count++; |
| |
| /* snag network header to get L4 type and address */ |
| hdr.network = skb_network_header(first->skb); |
| |
| /* Currently only IPv4/IPv6 with TCP is supported */ |
| if ((first->protocol != __constant_htons(ETH_P_IPV6) || |
| hdr.ipv6->nexthdr != IPPROTO_TCP) && |
| (first->protocol != __constant_htons(ETH_P_IP) || |
| hdr.ipv4->protocol != IPPROTO_TCP)) |
| return; |
| |
| th = tcp_hdr(first->skb); |
| |
| /* skip this packet since it is invalid or the socket is closing */ |
| if (!th || th->fin) |
| return; |
| |
| /* sample on all syn packets or once every atr sample count */ |
| if (!th->syn && (ring->atr_count < ring->atr_sample_rate)) |
| return; |
| |
| /* reset sample count */ |
| ring->atr_count = 0; |
| |
| vlan_id = htons(first->tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT); |
| |
| /* |
| * src and dst are inverted, think how the receiver sees them |
| * |
| * The input is broken into two sections, a non-compressed section |
| * containing vm_pool, vlan_id, and flow_type. The rest of the data |
| * is XORed together and stored in the compressed dword. |
| */ |
| input.formatted.vlan_id = vlan_id; |
| |
| /* |
| * since src port and flex bytes occupy the same word XOR them together |
| * and write the value to source port portion of compressed dword |
| */ |
| if (first->tx_flags & (IXGBE_TX_FLAGS_SW_VLAN | IXGBE_TX_FLAGS_HW_VLAN)) |
| common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q); |
| else |
| common.port.src ^= th->dest ^ first->protocol; |
| common.port.dst ^= th->source; |
| |
| if (first->protocol == __constant_htons(ETH_P_IP)) { |
| input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; |
| common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr; |
| } else { |
| input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6; |
| common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^ |
| hdr.ipv6->saddr.s6_addr32[1] ^ |
| hdr.ipv6->saddr.s6_addr32[2] ^ |
| hdr.ipv6->saddr.s6_addr32[3] ^ |
| hdr.ipv6->daddr.s6_addr32[0] ^ |
| hdr.ipv6->daddr.s6_addr32[1] ^ |
| hdr.ipv6->daddr.s6_addr32[2] ^ |
| hdr.ipv6->daddr.s6_addr32[3]; |
| } |
| |
| /* This assumes the Rx queue and Tx queue are bound to the same CPU */ |
| ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw, |
| input, common, ring->queue_index); |
| } |
| |
| static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) |
| { |
| netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); |
| /* Herbert's original patch had: |
| * smp_mb__after_netif_stop_queue(); |
| * but since that doesn't exist yet, just open code it. */ |
| smp_mb(); |
| |
| /* We need to check again in a case another CPU has just |
| * made room available. */ |
| if (likely(ixgbe_desc_unused(tx_ring) < size)) |
| return -EBUSY; |
| |
| /* A reprieve! - use start_queue because it doesn't call schedule */ |
| netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); |
| ++tx_ring->tx_stats.restart_queue; |
| return 0; |
| } |
| |
| static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) |
| { |
| if (likely(ixgbe_desc_unused(tx_ring) >= size)) |
| return 0; |
| return __ixgbe_maybe_stop_tx(tx_ring, size); |
| } |
| |
| static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : |
| smp_processor_id(); |
| #ifdef IXGBE_FCOE |
| __be16 protocol = vlan_get_protocol(skb); |
| |
| if (((protocol == htons(ETH_P_FCOE)) || |
| (protocol == htons(ETH_P_FIP))) && |
| (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) { |
| txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1); |
| txq += adapter->ring_feature[RING_F_FCOE].mask; |
| return txq; |
| } |
| #endif |
| |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { |
| while (unlikely(txq >= dev->real_num_tx_queues)) |
| txq -= dev->real_num_tx_queues; |
| return txq; |
| } |
| |
| return skb_tx_hash(dev, skb); |
| } |
| |
| netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, |
| struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring) |
| { |
| struct ixgbe_tx_buffer *first; |
| int tso; |
| u32 tx_flags = 0; |
| #if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD |
| unsigned short f; |
| #endif |
| u16 count = TXD_USE_COUNT(skb_headlen(skb)); |
| __be16 protocol = skb->protocol; |
| u8 hdr_len = 0; |
| |
| /* |
| * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD, |
| * + 1 desc for skb_headlen/IXGBE_MAX_DATA_PER_TXD, |
| * + 2 desc gap to keep tail from touching head, |
| * + 1 desc for context descriptor, |
| * otherwise try next time |
| */ |
| #if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD |
| for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) |
| count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); |
| #else |
| count += skb_shinfo(skb)->nr_frags; |
| #endif |
| if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) { |
| tx_ring->tx_stats.tx_busy++; |
| return NETDEV_TX_BUSY; |
| } |
| |
| /* record the location of the first descriptor for this packet */ |
| first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; |
| first->skb = skb; |
| first->bytecount = skb->len; |
| first->gso_segs = 1; |
| |
| /* if we have a HW VLAN tag being added default to the HW one */ |
| if (vlan_tx_tag_present(skb)) { |
| tx_flags |= vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT; |
| tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; |
| /* else if it is a SW VLAN check the next protocol and store the tag */ |
| } else if (protocol == __constant_htons(ETH_P_8021Q)) { |
| struct vlan_hdr *vhdr, _vhdr; |
| vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr); |
| if (!vhdr) |
| goto out_drop; |
| |
| protocol = vhdr->h_vlan_encapsulated_proto; |
| tx_flags |= ntohs(vhdr->h_vlan_TCI) << |
| IXGBE_TX_FLAGS_VLAN_SHIFT; |
| tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; |
| } |
| |
| skb_tx_timestamp(skb); |
| |
| #ifdef CONFIG_IXGBE_PTP |
| if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; |
| tx_flags |= IXGBE_TX_FLAGS_TSTAMP; |
| } |
| #endif |
| |
| #ifdef CONFIG_PCI_IOV |
| /* |
| * Use the l2switch_enable flag - would be false if the DMA |
| * Tx switch had been disabled. |
| */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| tx_flags |= IXGBE_TX_FLAGS_TXSW; |
| |
| #endif |
| /* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */ |
| if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && |
| ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) || |
| (skb->priority != TC_PRIO_CONTROL))) { |
| tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK; |
| tx_flags |= (skb->priority & 0x7) << |
| IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT; |
| if (tx_flags & IXGBE_TX_FLAGS_SW_VLAN) { |
| struct vlan_ethhdr *vhdr; |
| if (skb_header_cloned(skb) && |
| pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) |
| goto out_drop; |
| vhdr = (struct vlan_ethhdr *)skb->data; |
| vhdr->h_vlan_TCI = htons(tx_flags >> |
| IXGBE_TX_FLAGS_VLAN_SHIFT); |
| } else { |
| tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; |
| } |
| } |
| |
| /* record initial flags and protocol */ |
| first->tx_flags = tx_flags; |
| first->protocol = protocol; |
| |
| #ifdef IXGBE_FCOE |
| /* setup tx offload for FCoE */ |
| if ((protocol == __constant_htons(ETH_P_FCOE)) && |
| (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) { |
| tso = ixgbe_fso(tx_ring, first, &hdr_len); |
| if (tso < 0) |
| goto out_drop; |
| |
| goto xmit_fcoe; |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| tso = ixgbe_tso(tx_ring, first, &hdr_len); |
| if (tso < 0) |
| goto out_drop; |
| else if (!tso) |
| ixgbe_tx_csum(tx_ring, first); |
| |
| /* add the ATR filter if ATR is on */ |
| if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state)) |
| ixgbe_atr(tx_ring, first); |
| |
| #ifdef IXGBE_FCOE |
| xmit_fcoe: |
| #endif /* IXGBE_FCOE */ |
| ixgbe_tx_map(tx_ring, first, hdr_len); |
| |
| ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED); |
| |
| return NETDEV_TX_OK; |
| |
| out_drop: |
| dev_kfree_skb_any(first->skb); |
| first->skb = NULL; |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_ring *tx_ring; |
| |
| if (skb->len <= 0) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* |
| * The minimum packet size for olinfo paylen is 17 so pad the skb |
| * in order to meet this minimum size requirement. |
| */ |
| if (skb->len < 17) { |
| if (skb_padto(skb, 17)) |
| return NETDEV_TX_OK; |
| skb->len = 17; |
| } |
| |
| tx_ring = adapter->tx_ring[skb->queue_mapping]; |
| return ixgbe_xmit_frame_ring(skb, adapter, tx_ring); |
| } |
| |
| /** |
| * ixgbe_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_set_mac(struct net_device *netdev, void *p) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); |
| |
| hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs, |
| IXGBE_RAH_AV); |
| |
| return 0; |
| } |
| |
| static int |
| ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u16 value; |
| int rc; |
| |
| if (prtad != hw->phy.mdio.prtad) |
| return -EINVAL; |
| rc = hw->phy.ops.read_reg(hw, addr, devad, &value); |
| if (!rc) |
| rc = value; |
| return rc; |
| } |
| |
| static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad, |
| u16 addr, u16 value) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (prtad != hw->phy.mdio.prtad) |
| return -EINVAL; |
| return hw->phy.ops.write_reg(hw, addr, devad, value); |
| } |
| |
| static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| switch (cmd) { |
| #ifdef CONFIG_IXGBE_PTP |
| case SIOCSHWTSTAMP: |
| return ixgbe_ptp_hwtstamp_ioctl(adapter, req, cmd); |
| #endif |
| default: |
| return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); |
| } |
| } |
| |
| /** |
| * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding |
| * netdev->dev_addrs |
| * @netdev: network interface device structure |
| * |
| * Returns non-zero on failure |
| **/ |
| static int ixgbe_add_sanmac_netdev(struct net_device *dev) |
| { |
| int err = 0; |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_mac_info *mac = &adapter->hw.mac; |
| |
| if (is_valid_ether_addr(mac->san_addr)) { |
| rtnl_lock(); |
| err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); |
| rtnl_unlock(); |
| } |
| return err; |
| } |
| |
| /** |
| * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding |
| * netdev->dev_addrs |
| * @netdev: network interface device structure |
| * |
| * Returns non-zero on failure |
| **/ |
| static int ixgbe_del_sanmac_netdev(struct net_device *dev) |
| { |
| int err = 0; |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_mac_info *mac = &adapter->hw.mac; |
| |
| if (is_valid_ether_addr(mac->san_addr)) { |
| rtnl_lock(); |
| err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); |
| rtnl_unlock(); |
| } |
| return err; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /* |
| * Polling 'interrupt' - used by things like netconsole to send skbs |
| * without having to re-enable interrupts. It's not called while |
| * the interrupt routine is executing. |
| */ |
| static void ixgbe_netpoll(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int i; |
| |
| /* if interface is down do nothing */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return; |
| |
| adapter->flags |= IXGBE_FLAG_IN_NETPOLL; |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| for (i = 0; i < num_q_vectors; i++) { |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; |
| ixgbe_msix_clean_rings(0, q_vector); |
| } |
| } else { |
| ixgbe_intr(adapter->pdev->irq, netdev); |
| } |
| adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL; |
| } |
| |
| #endif |
| static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int i; |
| |
| rcu_read_lock(); |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]); |
| u64 bytes, packets; |
| unsigned int start; |
| |
| if (ring) { |
| do { |
| start = u64_stats_fetch_begin_bh(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); |
| stats->rx_packets += packets; |
| stats->rx_bytes += bytes; |
| } |
| } |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *ring = ACCESS_ONCE(adapter->tx_ring[i]); |
| u64 bytes, packets; |
| unsigned int start; |
| |
| if (ring) { |
| do { |
| start = u64_stats_fetch_begin_bh(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); |
| stats->tx_packets += packets; |
| stats->tx_bytes += bytes; |
| } |
| } |
| rcu_read_unlock(); |
| /* following stats updated by ixgbe_watchdog_task() */ |
| stats->multicast = netdev->stats.multicast; |
| stats->rx_errors = netdev->stats.rx_errors; |
| stats->rx_length_errors = netdev->stats.rx_length_errors; |
| stats->rx_crc_errors = netdev->stats.rx_crc_errors; |
| stats->rx_missed_errors = netdev->stats.rx_missed_errors; |
| return stats; |
| } |
| |
| #ifdef CONFIG_IXGBE_DCB |
| /* ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid. |
| * #adapter: pointer to ixgbe_adapter |
| * @tc: number of traffic classes currently enabled |
| * |
| * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm |
| * 802.1Q priority maps to a packet buffer that exists. |
| */ |
| static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 reg, rsave; |
| int i; |
| |
| /* 82598 have a static priority to TC mapping that can not |
| * be changed so no validation is needed. |
| */ |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC); |
| rsave = reg; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| u8 up2tc = reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT); |
| |
| /* If up2tc is out of bounds default to zero */ |
| if (up2tc > tc) |
| reg &= ~(0x7 << IXGBE_RTRUP2TC_UP_SHIFT); |
| } |
| |
| if (reg != rsave) |
| IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg); |
| |
| return; |
| } |
| |
| /* ixgbe_setup_tc - routine to configure net_device for multiple traffic |
| * classes. |
| * |
| * @netdev: net device to configure |
| * @tc: number of traffic classes to enable |
| */ |
| int ixgbe_setup_tc(struct net_device *dev, u8 tc) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| /* Multiple traffic classes requires multiple queues */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { |
| e_err(drv, "Enable failed, needs MSI-X\n"); |
| return -EINVAL; |
| } |
| |
| /* Hardware supports up to 8 traffic classes */ |
| if (tc > adapter->dcb_cfg.num_tcs.pg_tcs || |
| (hw->mac.type == ixgbe_mac_82598EB && |
| tc < MAX_TRAFFIC_CLASS)) |
| return -EINVAL; |
| |
| /* Hardware has to reinitialize queues and interrupts to |
| * match packet buffer alignment. Unfortunately, the |
| * hardware is not flexible enough to do this dynamically. |
| */ |
| if (netif_running(dev)) |
| ixgbe_close(dev); |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| if (tc) { |
| netdev_set_num_tc(dev, tc); |
| adapter->flags |= IXGBE_FLAG_DCB_ENABLED; |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) { |
| adapter->last_lfc_mode = adapter->hw.fc.requested_mode; |
| adapter->hw.fc.requested_mode = ixgbe_fc_none; |
| } |
| } else { |
| netdev_reset_tc(dev); |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| adapter->hw.fc.requested_mode = adapter->last_lfc_mode; |
| |
| adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; |
| adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| |
| adapter->temp_dcb_cfg.pfc_mode_enable = false; |
| adapter->dcb_cfg.pfc_mode_enable = false; |
| } |
| |
| ixgbe_init_interrupt_scheme(adapter); |
| ixgbe_validate_rtr(adapter, tc); |
| if (netif_running(dev)) |
| ixgbe_open(dev); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_IXGBE_DCB */ |
| void ixgbe_do_reset(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| if (netif_running(netdev)) |
| ixgbe_reinit_locked(adapter); |
| else |
| ixgbe_reset(adapter); |
| } |
| |
| static netdev_features_t ixgbe_fix_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* return error if RXHASH is being enabled when RSS is not supported */ |
| if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) |
| features &= ~NETIF_F_RXHASH; |
| |
| /* If Rx checksum is disabled, then RSC/LRO should also be disabled */ |
| if (!(features & NETIF_F_RXCSUM)) |
| features &= ~NETIF_F_LRO; |
| |
| /* Turn off LRO if not RSC capable */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) |
| features &= ~NETIF_F_LRO; |
| |
| return features; |
| } |
| |
| static int ixgbe_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| netdev_features_t changed = netdev->features ^ features; |
| bool need_reset = false; |
| |
| /* Make sure RSC matches LRO, reset if change */ |
| if (!(features & NETIF_F_LRO)) { |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) |
| need_reset = true; |
| adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; |
| } else if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) && |
| !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { |
| if (adapter->rx_itr_setting == 1 || |
| adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) { |
| adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; |
| need_reset = true; |
| } else if ((changed ^ features) & NETIF_F_LRO) { |
| e_info(probe, "rx-usecs set too low, " |
| "disabling RSC\n"); |
| } |
| } |
| |
| /* |
| * Check if Flow Director n-tuple support was enabled or disabled. If |
| * the state changed, we need to reset. |
| */ |
| if (!(features & NETIF_F_NTUPLE)) { |
| if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { |
| /* turn off Flow Director, set ATR and reset */ |
| if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) && |
| !(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) |
| adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| need_reset = true; |
| } |
| adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; |
| } else if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) { |
| /* turn off ATR, enable perfect filters and reset */ |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; |
| need_reset = true; |
| } |
| |
| if (features & NETIF_F_HW_VLAN_RX) |
| ixgbe_vlan_strip_enable(adapter); |
| else |
| ixgbe_vlan_strip_disable(adapter); |
| |
| if (changed & NETIF_F_RXALL) |
| need_reset = true; |
| |
| netdev->features = features; |
| if (need_reset) |
| ixgbe_do_reset(netdev); |
| |
| return 0; |
| } |
| |
| static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, |
| struct net_device *dev, |
| unsigned char *addr, |
| u16 flags) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| int err = -EOPNOTSUPP; |
| |
| if (ndm->ndm_state & NUD_PERMANENT) { |
| pr_info("%s: FDB only supports static addresses\n", |
| ixgbe_driver_name); |
| return -EINVAL; |
| } |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| if (is_unicast_ether_addr(addr)) |
| err = dev_uc_add_excl(dev, addr); |
| else if (is_multicast_ether_addr(addr)) |
| err = dev_mc_add_excl(dev, addr); |
| else |
| err = -EINVAL; |
| } |
| |
| /* Only return duplicate errors if NLM_F_EXCL is set */ |
| if (err == -EEXIST && !(flags & NLM_F_EXCL)) |
| err = 0; |
| |
| return err; |
| } |
| |
| static int ixgbe_ndo_fdb_del(struct ndmsg *ndm, |
| struct net_device *dev, |
| unsigned char *addr) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| int err = -EOPNOTSUPP; |
| |
| if (ndm->ndm_state & NUD_PERMANENT) { |
| pr_info("%s: FDB only supports static addresses\n", |
| ixgbe_driver_name); |
| return -EINVAL; |
| } |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| if (is_unicast_ether_addr(addr)) |
| err = dev_uc_del(dev, addr); |
| else if (is_multicast_ether_addr(addr)) |
| err = dev_mc_del(dev, addr); |
| else |
| err = -EINVAL; |
| } |
| |
| return err; |
| } |
| |
| static int ixgbe_ndo_fdb_dump(struct sk_buff *skb, |
| struct netlink_callback *cb, |
| struct net_device *dev, |
| int idx) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| idx = ndo_dflt_fdb_dump(skb, cb, dev, idx); |
| |
| return idx; |
| } |
| |
| static const struct net_device_ops ixgbe_netdev_ops = { |
| .ndo_open = ixgbe_open, |
| .ndo_stop = ixgbe_close, |
| .ndo_start_xmit = ixgbe_xmit_frame, |
| .ndo_select_queue = ixgbe_select_queue, |
| .ndo_set_rx_mode = ixgbe_set_rx_mode, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = ixgbe_set_mac, |
| .ndo_change_mtu = ixgbe_change_mtu, |
| .ndo_tx_timeout = ixgbe_tx_timeout, |
| .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid, |
| .ndo_do_ioctl = ixgbe_ioctl, |
| .ndo_set_vf_mac = ixgbe_ndo_set_vf_mac, |
| .ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan, |
| .ndo_set_vf_tx_rate = ixgbe_ndo_set_vf_bw, |
| .ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk, |
| .ndo_get_vf_config = ixgbe_ndo_get_vf_config, |
| .ndo_get_stats64 = ixgbe_get_stats64, |
| #ifdef CONFIG_IXGBE_DCB |
| .ndo_setup_tc = ixgbe_setup_tc, |
| #endif |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = ixgbe_netpoll, |
| #endif |
| #ifdef IXGBE_FCOE |
| .ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get, |
| .ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target, |
| .ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put, |
| .ndo_fcoe_enable = ixgbe_fcoe_enable, |
| .ndo_fcoe_disable = ixgbe_fcoe_disable, |
| .ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn, |
| .ndo_fcoe_get_hbainfo = ixgbe_fcoe_get_hbainfo, |
| #endif /* IXGBE_FCOE */ |
| .ndo_set_features = ixgbe_set_features, |
| .ndo_fix_features = ixgbe_fix_features, |
| .ndo_fdb_add = ixgbe_ndo_fdb_add, |
| .ndo_fdb_del = ixgbe_ndo_fdb_del, |
| .ndo_fdb_dump = ixgbe_ndo_fdb_dump, |
| }; |
| |
| static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter, |
| const struct ixgbe_info *ii) |
| { |
| #ifdef CONFIG_PCI_IOV |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| /* The 82599 supports up to 64 VFs per physical function |
| * but this implementation limits allocation to 63 so that |
| * basic networking resources are still available to the |
| * physical function. If the user requests greater thn |
| * 63 VFs then it is an error - reset to default of zero. |
| */ |
| adapter->num_vfs = (max_vfs > 63) ? 0 : max_vfs; |
| ixgbe_enable_sriov(adapter, ii); |
| #endif /* CONFIG_PCI_IOV */ |
| } |
| |
| /** |
| * ixgbe_wol_supported - Check whether device supports WoL |
| * @hw: hw specific details |
| * @device_id: the device ID |
| * @subdev_id: the subsystem device ID |
| * |
| * This function is used by probe and ethtool to determine |
| * which devices have WoL support |
| * |
| **/ |
| int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id, |
| u16 subdevice_id) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; |
| int is_wol_supported = 0; |
| |
| switch (device_id) { |
| case IXGBE_DEV_ID_82599_SFP: |
| /* Only these subdevices could supports WOL */ |
| switch (subdevice_id) { |
| case IXGBE_SUBDEV_ID_82599_560FLR: |
| /* only support first port */ |
| if (hw->bus.func != 0) |
| break; |
| case IXGBE_SUBDEV_ID_82599_SFP: |
| is_wol_supported = 1; |
| break; |
| } |
| break; |
| case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: |
| /* All except this subdevice support WOL */ |
| if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) |
| is_wol_supported = 1; |
| break; |
| case IXGBE_DEV_ID_82599_KX4: |
| is_wol_supported = 1; |
| break; |
| case IXGBE_DEV_ID_X540T: |
| /* check eeprom to see if enabled wol */ |
| if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || |
| ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && |
| (hw->bus.func == 0))) { |
| is_wol_supported = 1; |
| } |
| break; |
| } |
| |
| return is_wol_supported; |
| } |
| |
| /** |
| * ixgbe_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in ixgbe_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * ixgbe_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring of the adapter private structure, |
| * and a hardware reset occur. |
| **/ |
| static int __devinit ixgbe_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct ixgbe_adapter *adapter = NULL; |
| struct ixgbe_hw *hw; |
| const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; |
| static int cards_found; |
| int i, err, pci_using_dac; |
| u8 part_str[IXGBE_PBANUM_LENGTH]; |
| unsigned int indices = num_possible_cpus(); |
| #ifdef IXGBE_FCOE |
| u16 device_caps; |
| #endif |
| u32 eec; |
| |
| /* Catch broken hardware that put the wrong VF device ID in |
| * the PCIe SR-IOV capability. |
| */ |
| if (pdev->is_virtfn) { |
| WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n", |
| pci_name(pdev), pdev->vendor, pdev->device); |
| return -EINVAL; |
| } |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) |
| return err; |
| |
| if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && |
| !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { |
| pci_using_dac = 1; |
| } else { |
| err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) { |
| err = dma_set_coherent_mask(&pdev->dev, |
| DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, |
| "No usable DMA configuration, aborting\n"); |
| goto err_dma; |
| } |
| } |
| pci_using_dac = 0; |
| } |
| |
| err = pci_request_selected_regions(pdev, pci_select_bars(pdev, |
| IORESOURCE_MEM), ixgbe_driver_name); |
| if (err) { |
| dev_err(&pdev->dev, |
| "pci_request_selected_regions failed 0x%x\n", err); |
| goto err_pci_reg; |
| } |
| |
| pci_enable_pcie_error_reporting(pdev); |
| |
| pci_set_master(pdev); |
| pci_save_state(pdev); |
| |
| #ifdef CONFIG_IXGBE_DCB |
| indices *= MAX_TRAFFIC_CLASS; |
| #endif |
| |
| if (ii->mac == ixgbe_mac_82598EB) |
| indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES); |
| else |
| indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES); |
| |
| #ifdef IXGBE_FCOE |
| indices += min_t(unsigned int, num_possible_cpus(), |
| IXGBE_MAX_FCOE_INDICES); |
| #endif |
| netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| adapter = netdev_priv(netdev); |
| pci_set_drvdata(pdev, adapter); |
| |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| hw = &adapter->hw; |
| hw->back = adapter; |
| adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); |
| |
| hw->hw_addr = ioremap(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| if (!hw->hw_addr) { |
| err = -EIO; |
| goto err_ioremap; |
| } |
| |
| for (i = 1; i <= 5; i++) { |
| if (pci_resource_len(pdev, i) == 0) |
| continue; |
| } |
| |
| netdev->netdev_ops = &ixgbe_netdev_ops; |
| ixgbe_set_ethtool_ops(netdev); |
| netdev->watchdog_timeo = 5 * HZ; |
| strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); |
| |
| adapter->bd_number = cards_found; |
| |
| /* Setup hw api */ |
| memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops)); |
| hw->mac.type = ii->mac; |
| |
| /* EEPROM */ |
| memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops)); |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC); |
| /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */ |
| if (!(eec & (1 << 8))) |
| hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic; |
| |
| /* PHY */ |
| memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops)); |
| hw->phy.sfp_type = ixgbe_sfp_type_unknown; |
| /* ixgbe_identify_phy_generic will set prtad and mmds properly */ |
| hw->phy.mdio.prtad = MDIO_PRTAD_NONE; |
| hw->phy.mdio.mmds = 0; |
| hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; |
| hw->phy.mdio.dev = netdev; |
| hw->phy.mdio.mdio_read = ixgbe_mdio_read; |
| hw->phy.mdio.mdio_write = ixgbe_mdio_write; |
| |
| ii->get_invariants(hw); |
| |
| /* setup the private structure */ |
| err = ixgbe_sw_init(adapter); |
| if (err) |
| goto err_sw_init; |
| |
| /* Make it possible the adapter to be woken up via WOL */ |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); |
| break; |
| default: |
| break; |
| } |
| |
| /* |
| * If there is a fan on this device and it has failed log the |
| * failure. |
| */ |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { |
| u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); |
| if (esdp & IXGBE_ESDP_SDP1) |
| e_crit(probe, "Fan has stopped, replace the adapter\n"); |
| } |
| |
| if (allow_unsupported_sfp) |
| hw->allow_unsupported_sfp = allow_unsupported_sfp; |
| |
| /* reset_hw fills in the perm_addr as well */ |
| hw->phy.reset_if_overtemp = true; |
| err = hw->mac.ops.reset_hw(hw); |
| hw->phy.reset_if_overtemp = false; |
| if (err == IXGBE_ERR_SFP_NOT_PRESENT && |
| hw->mac.type == ixgbe_mac_82598EB) { |
| err = 0; |
| } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { |
| e_dev_err("failed to load because an unsupported SFP+ " |
| "module type was detected.\n"); |
| e_dev_err("Reload the driver after installing a supported " |
| "module.\n"); |
| goto err_sw_init; |
| } else if (err) { |
| e_dev_err("HW Init failed: %d\n", err); |
| goto err_sw_init; |
| } |
| |
| ixgbe_probe_vf(adapter, ii); |
| |
| netdev->features = NETIF_F_SG | |
| NETIF_F_IP_CSUM | |
| NETIF_F_IPV6_CSUM | |
| NETIF_F_HW_VLAN_TX | |
| NETIF_F_HW_VLAN_RX | |
| NETIF_F_HW_VLAN_FILTER | |
| NETIF_F_TSO | |
| NETIF_F_TSO6 | |
| NETIF_F_RXHASH | |
| NETIF_F_RXCSUM; |
| |
| netdev->hw_features = netdev->features; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| netdev->features |= NETIF_F_SCTP_CSUM; |
| netdev->hw_features |= NETIF_F_SCTP_CSUM | |
| NETIF_F_NTUPLE; |
| break; |
| default: |
| break; |
| } |
| |
| netdev->hw_features |= NETIF_F_RXALL; |
| |
| netdev->vlan_features |= NETIF_F_TSO; |
| netdev->vlan_features |= NETIF_F_TSO6; |
| netdev->vlan_features |= NETIF_F_IP_CSUM; |
| netdev->vlan_features |= NETIF_F_IPV6_CSUM; |
| netdev->vlan_features |= NETIF_F_SG; |
| |
| netdev->priv_flags |= IFF_UNICAST_FLT; |
| netdev->priv_flags |= IFF_SUPP_NOFCS; |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED | |
| IXGBE_FLAG_DCB_ENABLED); |
| |
| #ifdef CONFIG_IXGBE_DCB |
| netdev->dcbnl_ops = &dcbnl_ops; |
| #endif |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { |
| if (hw->mac.ops.get_device_caps) { |
| hw->mac.ops.get_device_caps(hw, &device_caps); |
| if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) |
| adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; |
| } |
| } |
| if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { |
| netdev->vlan_features |= NETIF_F_FCOE_CRC; |
| netdev->vlan_features |= NETIF_F_FSO; |
| netdev->vlan_features |= NETIF_F_FCOE_MTU; |
| } |
| #endif /* IXGBE_FCOE */ |
| if (pci_using_dac) { |
| netdev->features |= NETIF_F_HIGHDMA; |
| netdev->vlan_features |= NETIF_F_HIGHDMA; |
| } |
| |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) |
| netdev->hw_features |= NETIF_F_LRO; |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) |
| netdev->features |= NETIF_F_LRO; |
| |
| /* make sure the EEPROM is good */ |
| if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) { |
| e_dev_err("The EEPROM Checksum Is Not Valid\n"); |
| err = -EIO; |
| goto err_sw_init; |
| } |
| |
| memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); |
| memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); |
| |
| if (ixgbe_validate_mac_addr(netdev->perm_addr)) { |
| e_dev_err("invalid MAC address\n"); |
| err = -EIO; |
| goto err_sw_init; |
| } |
| |
| setup_timer(&adapter->service_timer, &ixgbe_service_timer, |
| (unsigned long) adapter); |
| |
| INIT_WORK(&adapter->service_task, ixgbe_service_task); |
| clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); |
| |
| err = ixgbe_init_interrupt_scheme(adapter); |
| if (err) |
| goto err_sw_init; |
| |
| if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) { |
| netdev->hw_features &= ~NETIF_F_RXHASH; |
| netdev->features &= ~NETIF_F_RXHASH; |
| } |
| |
| /* WOL not supported for all devices */ |
| adapter->wol = 0; |
| hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap); |
| if (ixgbe_wol_supported(adapter, pdev->device, pdev->subsystem_device)) |
| adapter->wol = IXGBE_WUFC_MAG; |
| |
| device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); |
| |
| #ifdef CONFIG_IXGBE_PTP |
| ixgbe_ptp_init(adapter); |
| #endif /* CONFIG_IXGBE_PTP*/ |
| |
| /* save off EEPROM version number */ |
| hw->eeprom.ops.read(hw, 0x2e, &adapter->eeprom_verh); |
| hw->eeprom.ops.read(hw, 0x2d, &adapter->eeprom_verl); |
| |
| /* pick up the PCI bus settings for reporting later */ |
| hw->mac.ops.get_bus_info(hw); |
| |
| /* print bus type/speed/width info */ |
| e_dev_info("(PCI Express:%s:%s) %pM\n", |
| (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" : |
| hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" : |
| "Unknown"), |
| (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" : |
| hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" : |
| hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" : |
| "Unknown"), |
| netdev->dev_addr); |
| |
| err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH); |
| if (err) |
| strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH); |
| if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) |
| e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", |
| hw->mac.type, hw->phy.type, hw->phy.sfp_type, |
| part_str); |
| else |
| e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n", |
| hw->mac.type, hw->phy.type, part_str); |
| |
| if (hw->bus.width <= ixgbe_bus_width_pcie_x4) { |
| e_dev_warn("PCI-Express bandwidth available for this card is " |
| "not sufficient for optimal performance.\n"); |
| e_dev_warn("For optimal performance a x8 PCI-Express slot " |
| "is required.\n"); |
| } |
| |
| /* reset the hardware with the new settings */ |
| err = hw->mac.ops.start_hw(hw); |
| if (err == IXGBE_ERR_EEPROM_VERSION) { |
| /* We are running on a pre-production device, log a warning */ |
| e_dev_warn("This device is a pre-production adapter/LOM. " |
| "Please be aware there may be issues associated " |
| "with your hardware. If you are experiencing " |
| "problems please contact your Intel or hardware " |
| "representative who provided you with this " |
| "hardware.\n"); |
| } |
| strcpy(netdev->name, "eth%d"); |
| err = register_netdev(netdev); |
| if (err) |
| goto err_register; |
| |
| /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ |
| if (hw->mac.ops.disable_tx_laser && |
| ((hw->phy.multispeed_fiber) || |
| ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && |
| (hw->mac.type == ixgbe_mac_82599EB)))) |
| hw->mac.ops.disable_tx_laser(hw); |
| |
| /* carrier off reporting is important to ethtool even BEFORE open */ |
| netif_carrier_off(netdev); |
| |
| #ifdef CONFIG_IXGBE_DCA |
| if (dca_add_requester(&pdev->dev) == 0) { |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; |
| ixgbe_setup_dca(adapter); |
| } |
| #endif |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs); |
| for (i = 0; i < adapter->num_vfs; i++) |
| ixgbe_vf_configuration(pdev, (i | 0x10000000)); |
| } |
| |
| /* firmware requires driver version to be 0xFFFFFFFF |
| * since os does not support feature |
| */ |
| if (hw->mac.ops.set_fw_drv_ver) |
| hw->mac.ops.set_fw_drv_ver(hw, 0xFF, 0xFF, 0xFF, |
| 0xFF); |
| |
| /* add san mac addr to netdev */ |
| ixgbe_add_sanmac_netdev(netdev); |
| |
| e_dev_info("%s\n", ixgbe_default_device_descr); |
| cards_found++; |
| |
| #ifdef CONFIG_IXGBE_HWMON |
| if (ixgbe_sysfs_init(adapter)) |
| e_err(probe, "failed to allocate sysfs resources\n"); |
| #endif /* CONFIG_IXGBE_HWMON */ |
| |
| return 0; |
| |
| err_register: |
| ixgbe_release_hw_control(adapter); |
| ixgbe_clear_interrupt_scheme(adapter); |
| err_sw_init: |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| ixgbe_disable_sriov(adapter); |
| adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; |
| iounmap(hw->hw_addr); |
| err_ioremap: |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_selected_regions(pdev, |
| pci_select_bars(pdev, IORESOURCE_MEM)); |
| err_pci_reg: |
| err_dma: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * ixgbe_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * ixgbe_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| **/ |
| static void __devexit ixgbe_remove(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| cancel_work_sync(&adapter->service_task); |
| |
| #ifdef CONFIG_IXGBE_PTP |
| ixgbe_ptp_stop(adapter); |
| #endif |
| |
| #ifdef CONFIG_IXGBE_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; |
| dca_remove_requester(&pdev->dev); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); |
| } |
| |
| #endif |
| #ifdef CONFIG_IXGBE_HWMON |
| ixgbe_sysfs_exit(adapter); |
| #endif /* CONFIG_IXGBE_HWMON */ |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) |
| ixgbe_cleanup_fcoe(adapter); |
| |
| #endif /* IXGBE_FCOE */ |
| |
| /* remove the added san mac */ |
| ixgbe_del_sanmac_netdev(netdev); |
| |
| if (netdev->reg_state == NETREG_REGISTERED) |
| unregister_netdev(netdev); |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| if (!(ixgbe_check_vf_assignment(adapter))) |
| ixgbe_disable_sriov(adapter); |
| else |
| e_dev_warn("Unloading driver while VFs are assigned " |
| "- VFs will not be deallocated\n"); |
| } |
| |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| #ifdef CONFIG_DCB |
| kfree(adapter->ixgbe_ieee_pfc); |
| kfree(adapter->ixgbe_ieee_ets); |
| |
| #endif |
| iounmap(adapter->hw.hw_addr); |
| pci_release_selected_regions(pdev, pci_select_bars(pdev, |
| IORESOURCE_MEM)); |
| |
| e_dev_info("complete\n"); |
| |
| free_netdev(netdev); |
| |
| pci_disable_pcie_error_reporting(pdev); |
| |
| pci_disable_device(pdev); |
| } |
| |
| /** |
| * ixgbe_io_error_detected - called when PCI error is detected |
| * @pdev: Pointer to PCI device |
| * @state: The current pci connection state |
| * |
| * This function is called after a PCI bus error affecting |
| * this device has been detected. |
| */ |
| static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| #ifdef CONFIG_PCI_IOV |
| struct pci_dev *bdev, *vfdev; |
| u32 dw0, dw1, dw2, dw3; |
| int vf, pos; |
| u16 req_id, pf_func; |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB || |
| adapter->num_vfs == 0) |
| goto skip_bad_vf_detection; |
| |
| bdev = pdev->bus->self; |
| while (bdev && (bdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT)) |
| bdev = bdev->bus->self; |
| |
| if (!bdev) |
| goto skip_bad_vf_detection; |
| |
| pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); |
| if (!pos) |
| goto skip_bad_vf_detection; |
| |
| pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0); |
| pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1); |
| pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2); |
| pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3); |
| |
| req_id = dw1 >> 16; |
| /* On the 82599 if bit 7 of the requestor ID is set then it's a VF */ |
| if (!(req_id & 0x0080)) |
| goto skip_bad_vf_detection; |
| |
| pf_func = req_id & 0x01; |
| if ((pf_func & 1) == (pdev->devfn & 1)) { |
| unsigned int device_id; |
| |
| vf = (req_id & 0x7F) >> 1; |
| e_dev_err("VF %d has caused a PCIe error\n", vf); |
| e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " |
| "%8.8x\tdw3: %8.8x\n", |
| dw0, dw1, dw2, dw3); |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| device_id = IXGBE_82599_VF_DEVICE_ID; |
| break; |
| case ixgbe_mac_X540: |
| device_id = IXGBE_X540_VF_DEVICE_ID; |
| break; |
| default: |
| device_id = 0; |
| break; |
| } |
| |
| /* Find the pci device of the offending VF */ |
| vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL); |
| while (vfdev) { |
| if (vfdev->devfn == (req_id & 0xFF)) |
| break; |
| vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, |
| device_id, vfdev); |
| } |
| /* |
| * There's a slim chance the VF could have been hot plugged, |
| * so if it is no longer present we don't need to issue the |
| * VFLR. Just clean up the AER in that case. |
| */ |
| if (vfdev) { |
| e_dev_err("Issuing VFLR to VF %d\n", vf); |
| pci_write_config_dword(vfdev, 0xA8, 0x00008000); |
| } |
| |
| pci_cleanup_aer_uncorrect_error_status(pdev); |
| } |
| |
| /* |
| * Even though the error may have occurred on the other port |
| * we still need to increment the vf error reference count for |
| * both ports because the I/O resume function will be called |
| * for both of them. |
| */ |
| adapter->vferr_refcount++; |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| |
| skip_bad_vf_detection: |
| #endif /* CONFIG_PCI_IOV */ |
| netif_device_detach(netdev); |
| |
| if (state == pci_channel_io_perm_failure) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| if (netif_running(netdev)) |
| ixgbe_down(adapter); |
| pci_disable_device(pdev); |
| |
| /* Request a slot reset. */ |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /** |
| * ixgbe_io_slot_reset - called after the pci bus has been reset. |
| * @pdev: Pointer to PCI device |
| * |
| * Restart the card from scratch, as if from a cold-boot. |
| */ |
| static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| pci_ers_result_t result; |
| int err; |
| |
| if (pci_enable_device_mem(pdev)) { |
| e_err(probe, "Cannot re-enable PCI device after reset.\n"); |
| result = PCI_ERS_RESULT_DISCONNECT; |
| } else { |
| pci_set_master(pdev); |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| |
| pci_wake_from_d3(pdev, false); |
| |
| ixgbe_reset(adapter); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); |
| result = PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| err = pci_cleanup_aer_uncorrect_error_status(pdev); |
| if (err) { |
| e_dev_err("pci_cleanup_aer_uncorrect_error_status " |
| "failed 0x%0x\n", err); |
| /* non-fatal, continue */ |
| } |
| |
| return result; |
| } |
| |
| /** |
| * ixgbe_io_resume - called when traffic can start flowing again. |
| * @pdev: Pointer to PCI device |
| * |
| * This callback is called when the error recovery driver tells us that |
| * its OK to resume normal operation. |
| */ |
| static void ixgbe_io_resume(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| #ifdef CONFIG_PCI_IOV |
| if (adapter->vferr_refcount) { |
| e_info(drv, "Resuming after VF err\n"); |
| adapter->vferr_refcount--; |
| return; |
| } |
| |
| #endif |
| if (netif_running(netdev)) |
| ixgbe_up(adapter); |
| |
| netif_device_attach(netdev); |
| } |
| |
| static struct pci_error_handlers ixgbe_err_handler = { |
| .error_detected = ixgbe_io_error_detected, |
| .slot_reset = ixgbe_io_slot_reset, |
| .resume = ixgbe_io_resume, |
| }; |
| |
| static struct pci_driver ixgbe_driver = { |
| .name = ixgbe_driver_name, |
| .id_table = ixgbe_pci_tbl, |
| .probe = ixgbe_probe, |
| .remove = __devexit_p(ixgbe_remove), |
| #ifdef CONFIG_PM |
| .suspend = ixgbe_suspend, |
| .resume = ixgbe_resume, |
| #endif |
| .shutdown = ixgbe_shutdown, |
| .err_handler = &ixgbe_err_handler |
| }; |
| |
| /** |
| * ixgbe_init_module - Driver Registration Routine |
| * |
| * ixgbe_init_module is the first routine called when the driver is |
| * loaded. All it does is register with the PCI subsystem. |
| **/ |
| static int __init ixgbe_init_module(void) |
| { |
| int ret; |
| pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version); |
| pr_info("%s\n", ixgbe_copyright); |
| |
| #ifdef CONFIG_IXGBE_DCA |
| dca_register_notify(&dca_notifier); |
| #endif |
| |
| ret = pci_register_driver(&ixgbe_driver); |
| return ret; |
| } |
| |
| module_init(ixgbe_init_module); |
| |
| /** |
| * ixgbe_exit_module - Driver Exit Cleanup Routine |
| * |
| * ixgbe_exit_module is called just before the driver is removed |
| * from memory. |
| **/ |
| static void __exit ixgbe_exit_module(void) |
| { |
| #ifdef CONFIG_IXGBE_DCA |
| dca_unregister_notify(&dca_notifier); |
| #endif |
| pci_unregister_driver(&ixgbe_driver); |
| rcu_barrier(); /* Wait for completion of call_rcu()'s */ |
| } |
| |
| #ifdef CONFIG_IXGBE_DCA |
| static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, |
| void *p) |
| { |
| int ret_val; |
| |
| ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event, |
| __ixgbe_notify_dca); |
| |
| return ret_val ? NOTIFY_BAD : NOTIFY_DONE; |
| } |
| |
| #endif /* CONFIG_IXGBE_DCA */ |
| |
| module_exit(ixgbe_exit_module); |
| |
| /* ixgbe_main.c */ |