| /************************************************************************** |
| * Copyright (c) 2011, Intel Corporation. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| **************************************************************************/ |
| |
| #include <linux/backlight.h> |
| #include <drm/drmP.h> |
| #include <drm/drm.h> |
| #include "gma_drm.h" |
| #include "psb_drv.h" |
| #include "psb_reg.h" |
| #include "psb_intel_reg.h" |
| #include "intel_bios.h" |
| |
| |
| static int psb_output_init(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| psb_intel_lvds_init(dev, &dev_priv->mode_dev); |
| psb_intel_sdvo_init(dev, SDVOB); |
| return 0; |
| } |
| |
| #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE |
| |
| /* |
| * Poulsbo Backlight Interfaces |
| */ |
| |
| #define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ |
| #define BLC_PWM_FREQ_CALC_CONSTANT 32 |
| #define MHz 1000000 |
| |
| #define PSB_BLC_PWM_PRECISION_FACTOR 10 |
| #define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE |
| #define PSB_BLC_MIN_PWM_REG_FREQ 0x2 |
| |
| #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) |
| #define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) |
| |
| static int psb_brightness; |
| static struct backlight_device *psb_backlight_device; |
| |
| static int psb_get_brightness(struct backlight_device *bd) |
| { |
| /* return locally cached var instead of HW read (due to DPST etc.) */ |
| /* FIXME: ideally return actual value in case firmware fiddled with |
| it */ |
| return psb_brightness; |
| } |
| |
| |
| static int psb_backlight_setup(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| unsigned long core_clock; |
| /* u32 bl_max_freq; */ |
| /* unsigned long value; */ |
| u16 bl_max_freq; |
| uint32_t value; |
| uint32_t blc_pwm_precision_factor; |
| |
| /* get bl_max_freq and pol from dev_priv*/ |
| if (!dev_priv->lvds_bl) { |
| dev_err(dev->dev, "Has no valid LVDS backlight info\n"); |
| return -ENOENT; |
| } |
| bl_max_freq = dev_priv->lvds_bl->freq; |
| blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR; |
| |
| core_clock = dev_priv->core_freq; |
| |
| value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; |
| value *= blc_pwm_precision_factor; |
| value /= bl_max_freq; |
| value /= blc_pwm_precision_factor; |
| |
| if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ || |
| value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ) |
| return -ERANGE; |
| else { |
| value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; |
| REG_WRITE(BLC_PWM_CTL, |
| (value << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (value)); |
| } |
| return 0; |
| } |
| |
| static int psb_set_brightness(struct backlight_device *bd) |
| { |
| struct drm_device *dev = bl_get_data(psb_backlight_device); |
| int level = bd->props.brightness; |
| |
| /* Percentage 1-100% being valid */ |
| if (level < 1) |
| level = 1; |
| |
| psb_intel_lvds_set_brightness(dev, level); |
| psb_brightness = level; |
| return 0; |
| } |
| |
| static const struct backlight_ops psb_ops = { |
| .get_brightness = psb_get_brightness, |
| .update_status = psb_set_brightness, |
| }; |
| |
| static int psb_backlight_init(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| int ret; |
| struct backlight_properties props; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.max_brightness = 100; |
| props.type = BACKLIGHT_PLATFORM; |
| |
| psb_backlight_device = backlight_device_register("psb-bl", |
| NULL, (void *)dev, &psb_ops, &props); |
| if (IS_ERR(psb_backlight_device)) |
| return PTR_ERR(psb_backlight_device); |
| |
| ret = psb_backlight_setup(dev); |
| if (ret < 0) { |
| backlight_device_unregister(psb_backlight_device); |
| psb_backlight_device = NULL; |
| return ret; |
| } |
| psb_backlight_device->props.brightness = 100; |
| psb_backlight_device->props.max_brightness = 100; |
| backlight_update_status(psb_backlight_device); |
| dev_priv->backlight_device = psb_backlight_device; |
| return 0; |
| } |
| |
| #endif |
| |
| /* |
| * Provide the Poulsbo specific chip logic and low level methods |
| * for power management |
| */ |
| |
| static void psb_init_pm(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| |
| u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL); |
| gating &= ~3; /* Disable 2D clock gating */ |
| gating |= 1; |
| PSB_WSGX32(gating, PSB_CR_CLKGATECTL); |
| PSB_RSGX32(PSB_CR_CLKGATECTL); |
| } |
| |
| /** |
| * psb_save_display_registers - save registers lost on suspend |
| * @dev: our DRM device |
| * |
| * Save the state we need in order to be able to restore the interface |
| * upon resume from suspend |
| */ |
| static int psb_save_display_registers(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc; |
| struct drm_connector *connector; |
| struct psb_state *regs = &dev_priv->regs.psb; |
| |
| /* Display arbitration control + watermarks */ |
| regs->saveDSPARB = PSB_RVDC32(DSPARB); |
| regs->saveDSPFW1 = PSB_RVDC32(DSPFW1); |
| regs->saveDSPFW2 = PSB_RVDC32(DSPFW2); |
| regs->saveDSPFW3 = PSB_RVDC32(DSPFW3); |
| regs->saveDSPFW4 = PSB_RVDC32(DSPFW4); |
| regs->saveDSPFW5 = PSB_RVDC32(DSPFW5); |
| regs->saveDSPFW6 = PSB_RVDC32(DSPFW6); |
| regs->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); |
| |
| /* Save crtc and output state */ |
| mutex_lock(&dev->mode_config.mutex); |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| if (drm_helper_crtc_in_use(crtc)) |
| crtc->funcs->save(crtc); |
| } |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) |
| if (connector->funcs->save) |
| connector->funcs->save(connector); |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| return 0; |
| } |
| |
| /** |
| * psb_restore_display_registers - restore lost register state |
| * @dev: our DRM device |
| * |
| * Restore register state that was lost during suspend and resume. |
| */ |
| static int psb_restore_display_registers(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc; |
| struct drm_connector *connector; |
| struct psb_state *regs = &dev_priv->regs.psb; |
| |
| /* Display arbitration + watermarks */ |
| PSB_WVDC32(regs->saveDSPARB, DSPARB); |
| PSB_WVDC32(regs->saveDSPFW1, DSPFW1); |
| PSB_WVDC32(regs->saveDSPFW2, DSPFW2); |
| PSB_WVDC32(regs->saveDSPFW3, DSPFW3); |
| PSB_WVDC32(regs->saveDSPFW4, DSPFW4); |
| PSB_WVDC32(regs->saveDSPFW5, DSPFW5); |
| PSB_WVDC32(regs->saveDSPFW6, DSPFW6); |
| PSB_WVDC32(regs->saveCHICKENBIT, DSPCHICKENBIT); |
| |
| /*make sure VGA plane is off. it initializes to on after reset!*/ |
| PSB_WVDC32(0x80000000, VGACNTRL); |
| |
| mutex_lock(&dev->mode_config.mutex); |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) |
| if (drm_helper_crtc_in_use(crtc)) |
| crtc->funcs->restore(crtc); |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) |
| if (connector->funcs->restore) |
| connector->funcs->restore(connector); |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| return 0; |
| } |
| |
| static int psb_power_down(struct drm_device *dev) |
| { |
| return 0; |
| } |
| |
| static int psb_power_up(struct drm_device *dev) |
| { |
| return 0; |
| } |
| |
| static void psb_get_core_freq(struct drm_device *dev) |
| { |
| uint32_t clock; |
| struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| |
| /*pci_write_config_dword(pci_root, 0xD4, 0x00C32004);*/ |
| /*pci_write_config_dword(pci_root, 0xD0, 0xE0033000);*/ |
| |
| pci_write_config_dword(pci_root, 0xD0, 0xD0050300); |
| pci_read_config_dword(pci_root, 0xD4, &clock); |
| pci_dev_put(pci_root); |
| |
| switch (clock & 0x07) { |
| case 0: |
| dev_priv->core_freq = 100; |
| break; |
| case 1: |
| dev_priv->core_freq = 133; |
| break; |
| case 2: |
| dev_priv->core_freq = 150; |
| break; |
| case 3: |
| dev_priv->core_freq = 178; |
| break; |
| case 4: |
| dev_priv->core_freq = 200; |
| break; |
| case 5: |
| case 6: |
| case 7: |
| dev_priv->core_freq = 266; |
| default: |
| dev_priv->core_freq = 0; |
| } |
| } |
| |
| /* Poulsbo */ |
| static const struct psb_offset psb_regmap[2] = { |
| { |
| .fp0 = FPA0, |
| .fp1 = FPA1, |
| .cntr = DSPACNTR, |
| .conf = PIPEACONF, |
| .src = PIPEASRC, |
| .dpll = DPLL_A, |
| .htotal = HTOTAL_A, |
| .hblank = HBLANK_A, |
| .hsync = HSYNC_A, |
| .vtotal = VTOTAL_A, |
| .vblank = VBLANK_A, |
| .vsync = VSYNC_A, |
| .stride = DSPASTRIDE, |
| .size = DSPASIZE, |
| .pos = DSPAPOS, |
| .base = DSPABASE, |
| .surf = DSPASURF, |
| .addr = DSPABASE, |
| .status = PIPEASTAT, |
| .linoff = DSPALINOFF, |
| .tileoff = DSPATILEOFF, |
| .palette = PALETTE_A, |
| }, |
| { |
| .fp0 = FPB0, |
| .fp1 = FPB1, |
| .cntr = DSPBCNTR, |
| .conf = PIPEBCONF, |
| .src = PIPEBSRC, |
| .dpll = DPLL_B, |
| .htotal = HTOTAL_B, |
| .hblank = HBLANK_B, |
| .hsync = HSYNC_B, |
| .vtotal = VTOTAL_B, |
| .vblank = VBLANK_B, |
| .vsync = VSYNC_B, |
| .stride = DSPBSTRIDE, |
| .size = DSPBSIZE, |
| .pos = DSPBPOS, |
| .base = DSPBBASE, |
| .surf = DSPBSURF, |
| .addr = DSPBBASE, |
| .status = PIPEBSTAT, |
| .linoff = DSPBLINOFF, |
| .tileoff = DSPBTILEOFF, |
| .palette = PALETTE_B, |
| } |
| }; |
| |
| static int psb_chip_setup(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| dev_priv->regmap = psb_regmap; |
| psb_get_core_freq(dev); |
| gma_intel_setup_gmbus(dev); |
| psb_intel_opregion_init(dev); |
| psb_intel_init_bios(dev); |
| return 0; |
| } |
| |
| /* Not exactly an erratum more an irritation */ |
| static void psb_chip_errata(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| psb_lid_timer_init(dev_priv); |
| } |
| |
| static void psb_chip_teardown(struct drm_device *dev) |
| { |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| psb_lid_timer_takedown(dev_priv); |
| gma_intel_teardown_gmbus(dev); |
| } |
| |
| const struct psb_ops psb_chip_ops = { |
| .name = "Poulsbo", |
| .accel_2d = 1, |
| .pipes = 2, |
| .crtcs = 2, |
| .hdmi_mask = (1 << 0), |
| .lvds_mask = (1 << 1), |
| .cursor_needs_phys = 1, |
| .sgx_offset = PSB_SGX_OFFSET, |
| .chip_setup = psb_chip_setup, |
| .chip_teardown = psb_chip_teardown, |
| .errata = psb_chip_errata, |
| |
| .crtc_helper = &psb_intel_helper_funcs, |
| .crtc_funcs = &psb_intel_crtc_funcs, |
| |
| .output_init = psb_output_init, |
| |
| #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE |
| .backlight_init = psb_backlight_init, |
| #endif |
| |
| .init_pm = psb_init_pm, |
| .save_regs = psb_save_display_registers, |
| .restore_regs = psb_restore_display_registers, |
| .power_down = psb_power_down, |
| .power_up = psb_power_up, |
| }; |
| |