| TPS65910 Power Management Integrated Circuit |
| |
| Required properties: |
| - compatible: "ti,tps65910" or "ti,tps65911" |
| - reg: I2C slave address |
| - interrupts: the interrupt outputs of the controller |
| - #gpio-cells: number of cells to describe a GPIO, this should be 2. |
| The first cell is the GPIO number. |
| The second cell is used to specify additional options <unused>. |
| - gpio-controller: mark the device as a GPIO controller |
| - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. |
| The first cell is the IRQ number. |
| The second cell is the flags, encoded as the trigger masks from |
| Documentation/devicetree/bindings/interrupts.txt |
| - regulators: This is the list of child nodes that specify the regulator |
| initialization data for defined regulators. Not all regulators for the given |
| device need to be present. The definition for each of these nodes is defined |
| using the standard binding for regulators found at |
| Documentation/devicetree/bindings/regulator/regulator.txt. |
| |
| The valid names for regulators are: |
| tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, |
| vaux2, vaux33, vmmc |
| tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, |
| ldo6, ldo7, ldo8 |
| |
| Optional properties: |
| - ti,vmbch-threshold: (tps65911) main battery charged threshold |
| comparator. (see VMBCH_VSEL in TPS65910 datasheet) |
| - ti,vmbch2-threshold: (tps65911) main battery discharged threshold |
| comparator. (see VMBCH_VSEL in TPS65910 datasheet) |
| - ti,en-gpio-sleep: enable sleep control for gpios |
| There should be 9 entries here, one for each gpio. |
| |
| Regulator Optional properties: |
| - ti,regulator-ext-sleep-control: enable external sleep |
| control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)] |
| If this property is not defined, it defaults to 0 (not enabled). |
| |
| Example: |
| |
| pmu: tps65910@d2 { |
| compatible = "ti,tps65910"; |
| reg = <0xd2>; |
| interrupt-parent = <&intc>; |
| interrupts = < 0 118 0x04 >; |
| |
| #gpio-cells = <2>; |
| gpio-controller; |
| |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| |
| ti,vmbch-threshold = 0; |
| ti,vmbch2-threshold = 0; |
| |
| ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; |
| |
| regulators { |
| vdd1_reg: vdd1 { |
| regulator-min-microvolt = < 600000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| vdd2_reg: vdd2 { |
| regulator-min-microvolt = < 600000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| ti,regulator-ext-sleep-control = <4>; |
| }; |
| vddctrl_reg: vddctrl { |
| regulator-min-microvolt = < 600000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-always-on; |
| regulator-boot-on; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| vio_reg: vio { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| ti,regulator-ext-sleep-control = <1>; |
| }; |
| ldo1_reg: ldo1 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3300000>; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| ldo2_reg: ldo2 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| ldo3_reg: ldo3 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3300000>; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| ldo4_reg: ldo4 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| ldo5_reg: ldo5 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3300000>; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| ldo6_reg: ldo6 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| ti,regulator-ext-sleep-control = <0>; |
| }; |
| ldo7_reg: ldo7 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| regulator-boot-on; |
| ti,regulator-ext-sleep-control = <1>; |
| }; |
| ldo8_reg: ldo8 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| ti,regulator-ext-sleep-control = <1>; |
| }; |
| }; |
| }; |