blob: 78f0a67797560f60e5861e01c63e27c229fa9a6b [file] [log] [blame]
/*
* LCD panel driver for Sharp LS037V7DW01
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
static struct omap_video_timings sharp_ls_timings = {
.x_res = 480,
.y_res = 640,
.pixel_clock = 19200,
.hsw = 2,
.hfp = 1,
.hbp = 28,
.vsw = 1,
.vfp = 1,
.vbp = 1,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
};
static inline struct panel_sharp_ls037v7dw01_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct panel_sharp_ls037v7dw01_data *) dssdev->data;
}
static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
{
struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
int r;
if (!pd)
return -EINVAL;
dssdev->panel.timings = sharp_ls_timings;
if (gpio_is_valid(pd->mo_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->mo_gpio,
GPIOF_OUT_INIT_LOW, "lcd MO");
if (r)
return r;
}
if (gpio_is_valid(pd->lr_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->lr_gpio,
GPIOF_OUT_INIT_HIGH, "lcd LR");
if (r)
return r;
}
if (gpio_is_valid(pd->ud_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->ud_gpio,
GPIOF_OUT_INIT_HIGH, "lcd UD");
if (r)
return r;
}
if (gpio_is_valid(pd->resb_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->resb_gpio,
GPIOF_OUT_INIT_LOW, "lcd RESB");
if (r)
return r;
}
if (gpio_is_valid(pd->ini_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->ini_gpio,
GPIOF_OUT_INIT_LOW, "lcd INI");
if (r)
return r;
}
return 0;
}
static void __exit sharp_ls_panel_remove(struct omap_dss_device *dssdev)
{
}
static int sharp_ls_power_on(struct omap_dss_device *dssdev)
{
struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
int r = 0;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
if (gpio_is_valid(pd->resb_gpio))
gpio_set_value_cansleep(pd->resb_gpio, 1);
if (gpio_is_valid(pd->ini_gpio))
gpio_set_value_cansleep(pd->ini_gpio, 1);
return 0;
err0:
return r;
}
static void sharp_ls_power_off(struct omap_dss_device *dssdev)
{
struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (gpio_is_valid(pd->ini_gpio))
gpio_set_value_cansleep(pd->ini_gpio, 0);
if (gpio_is_valid(pd->resb_gpio))
gpio_set_value_cansleep(pd->resb_gpio, 0);
/* wait at least 5 vsyncs after disabling the LCD */
msleep(100);
omapdss_dpi_display_disable(dssdev);
}
static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
{
int r;
r = sharp_ls_power_on(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return r;
}
static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
{
sharp_ls_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static struct omap_dss_driver sharp_ls_driver = {
.probe = sharp_ls_panel_probe,
.remove = __exit_p(sharp_ls_panel_remove),
.enable = sharp_ls_panel_enable,
.disable = sharp_ls_panel_disable,
.driver = {
.name = "sharp_ls_panel",
.owner = THIS_MODULE,
},
};
static int __init sharp_ls_panel_drv_init(void)
{
return omap_dss_register_driver(&sharp_ls_driver);
}
static void __exit sharp_ls_panel_drv_exit(void)
{
omap_dss_unregister_driver(&sharp_ls_driver);
}
module_init(sharp_ls_panel_drv_init);
module_exit(sharp_ls_panel_drv_exit);
MODULE_LICENSE("GPL");