| /* |
| * pps-gpio.c -- PPS client driver using GPIO |
| * |
| * |
| * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt> |
| * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #define PPS_GPIO_NAME "pps-gpio" |
| #define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/pps_kernel.h> |
| #include <linux/pps-gpio.h> |
| #include <linux/gpio.h> |
| #include <linux/list.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| |
| /* Info for each registered platform device */ |
| struct pps_gpio_device_data { |
| int irq; /* IRQ used as PPS source */ |
| struct pps_device *pps; /* PPS source device */ |
| struct pps_source_info info; /* PPS source information */ |
| bool assert_falling_edge; |
| bool capture_clear; |
| unsigned int gpio_pin; |
| }; |
| |
| /* |
| * Report the PPS event |
| */ |
| |
| static irqreturn_t pps_gpio_irq_handler(int irq, void *data) |
| { |
| const struct pps_gpio_device_data *info; |
| struct pps_event_time ts; |
| int rising_edge; |
| |
| /* Get the time stamp first */ |
| pps_get_ts(&ts); |
| |
| info = data; |
| |
| rising_edge = gpio_get_value(info->gpio_pin); |
| if ((rising_edge && !info->assert_falling_edge) || |
| (!rising_edge && info->assert_falling_edge)) |
| pps_event(info->pps, &ts, PPS_CAPTUREASSERT, NULL); |
| else if (info->capture_clear && |
| ((rising_edge && info->assert_falling_edge) || |
| (!rising_edge && !info->assert_falling_edge))) |
| pps_event(info->pps, &ts, PPS_CAPTURECLEAR, NULL); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static unsigned long |
| get_irqf_trigger_flags(const struct pps_gpio_device_data *data) |
| { |
| unsigned long flags = data->assert_falling_edge ? |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; |
| |
| if (data->capture_clear) { |
| flags |= ((flags & IRQF_TRIGGER_RISING) ? |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING); |
| } |
| |
| return flags; |
| } |
| |
| static int pps_gpio_probe(struct platform_device *pdev) |
| { |
| struct pps_gpio_device_data *data; |
| const char *gpio_label; |
| int ret; |
| int pps_default_params; |
| const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data; |
| struct device_node *np = pdev->dev.of_node; |
| |
| /* allocate space for device info */ |
| data = devm_kzalloc(&pdev->dev, sizeof(struct pps_gpio_device_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| if (pdata) { |
| data->gpio_pin = pdata->gpio_pin; |
| gpio_label = pdata->gpio_label; |
| |
| data->assert_falling_edge = pdata->assert_falling_edge; |
| data->capture_clear = pdata->capture_clear; |
| } else { |
| ret = of_get_gpio(np, 0); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to get GPIO from device tree\n"); |
| return ret; |
| } |
| data->gpio_pin = ret; |
| gpio_label = PPS_GPIO_NAME; |
| |
| if (of_get_property(np, "assert-falling-edge", NULL)) |
| data->assert_falling_edge = true; |
| } |
| |
| /* GPIO setup */ |
| ret = devm_gpio_request(&pdev->dev, data->gpio_pin, gpio_label); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to request GPIO %u\n", |
| data->gpio_pin); |
| return ret; |
| } |
| |
| ret = gpio_direction_input(data->gpio_pin); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to set pin direction\n"); |
| return -EINVAL; |
| } |
| |
| /* IRQ setup */ |
| ret = gpio_to_irq(data->gpio_pin); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to map GPIO to IRQ: %d\n", ret); |
| return -EINVAL; |
| } |
| data->irq = ret; |
| |
| /* initialize PPS specific parts of the bookkeeping data structure. */ |
| data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT | |
| PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC; |
| if (data->capture_clear) |
| data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR | |
| PPS_ECHOCLEAR; |
| data->info.owner = THIS_MODULE; |
| snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d", |
| pdev->name, pdev->id); |
| |
| /* register PPS source */ |
| pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT; |
| if (data->capture_clear) |
| pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR; |
| data->pps = pps_register_source(&data->info, pps_default_params); |
| if (data->pps == NULL) { |
| dev_err(&pdev->dev, "failed to register IRQ %d as PPS source\n", |
| data->irq); |
| return -EINVAL; |
| } |
| |
| /* register IRQ interrupt handler */ |
| ret = devm_request_irq(&pdev->dev, data->irq, pps_gpio_irq_handler, |
| get_irqf_trigger_flags(data), data->info.name, data); |
| if (ret) { |
| pps_unregister_source(data->pps); |
| dev_err(&pdev->dev, "failed to acquire IRQ %d\n", data->irq); |
| return -EINVAL; |
| } |
| |
| platform_set_drvdata(pdev, data); |
| dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", |
| data->irq); |
| |
| return 0; |
| } |
| |
| static int pps_gpio_remove(struct platform_device *pdev) |
| { |
| struct pps_gpio_device_data *data = platform_get_drvdata(pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| pps_unregister_source(data->pps); |
| dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq); |
| return 0; |
| } |
| |
| static const struct of_device_id pps_gpio_dt_ids[] = { |
| { .compatible = "pps-gpio", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, pps_gpio_dt_ids); |
| |
| static struct platform_driver pps_gpio_driver = { |
| .probe = pps_gpio_probe, |
| .remove = pps_gpio_remove, |
| .driver = { |
| .name = PPS_GPIO_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(pps_gpio_dt_ids), |
| }, |
| }; |
| |
| module_platform_driver(pps_gpio_driver); |
| MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>"); |
| MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>"); |
| MODULE_DESCRIPTION("Use GPIO pin as PPS source"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("1.0.0"); |