| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> |
| * Copyright (C) 2011 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #include <linux/ioport.h> |
| #include <linux/export.h> |
| #include <linux/clkdev.h> |
| #include <linux/of_address.h> |
| #include <asm/delay.h> |
| |
| #include <lantiq_soc.h> |
| |
| #include "../clk.h" |
| |
| /* infrastructure control register */ |
| #define SYS1_INFRAC 0x00bc |
| /* Configuration fuses for drivers and pll */ |
| #define STATUS_CONFIG 0x0040 |
| |
| /* GPE frequency selection */ |
| #define GPPC_OFFSET 24 |
| #define GPEFREQ_MASK 0x00000C0 |
| #define GPEFREQ_OFFSET 10 |
| /* Clock status register */ |
| #define SYSCTL_CLKS 0x0000 |
| /* Clock enable register */ |
| #define SYSCTL_CLKEN 0x0004 |
| /* Clock clear register */ |
| #define SYSCTL_CLKCLR 0x0008 |
| /* Activation Status Register */ |
| #define SYSCTL_ACTS 0x0020 |
| /* Activation Register */ |
| #define SYSCTL_ACT 0x0024 |
| /* Deactivation Register */ |
| #define SYSCTL_DEACT 0x0028 |
| /* reboot Register */ |
| #define SYSCTL_RBT 0x002c |
| /* CPU0 Clock Control Register */ |
| #define SYS1_CPU0CC 0x0040 |
| /* HRST_OUT_N Control Register */ |
| #define SYS1_HRSTOUTC 0x00c0 |
| /* clock divider bit */ |
| #define CPU0CC_CPUDIV 0x0001 |
| |
| /* Activation Status Register */ |
| #define ACTS_ASC1_ACT 0x00000800 |
| #define ACTS_I2C_ACT 0x00004000 |
| #define ACTS_P0 0x00010000 |
| #define ACTS_P1 0x00010000 |
| #define ACTS_P2 0x00020000 |
| #define ACTS_P3 0x00020000 |
| #define ACTS_P4 0x00040000 |
| #define ACTS_PADCTRL0 0x00100000 |
| #define ACTS_PADCTRL1 0x00100000 |
| #define ACTS_PADCTRL2 0x00200000 |
| #define ACTS_PADCTRL3 0x00200000 |
| #define ACTS_PADCTRL4 0x00400000 |
| |
| #define sysctl_w32(m, x, y) ltq_w32((x), sysctl_membase[m] + (y)) |
| #define sysctl_r32(m, x) ltq_r32(sysctl_membase[m] + (x)) |
| #define sysctl_w32_mask(m, clear, set, reg) \ |
| sysctl_w32(m, (sysctl_r32(m, reg) & ~(clear)) | (set), reg) |
| |
| #define status_w32(x, y) ltq_w32((x), status_membase + (y)) |
| #define status_r32(x) ltq_r32(status_membase + (x)) |
| |
| static void __iomem *sysctl_membase[3], *status_membase; |
| void __iomem *ltq_sys1_membase, *ltq_ebu_membase; |
| |
| void falcon_trigger_hrst(int level) |
| { |
| sysctl_w32(SYSCTL_SYS1, level & 1, SYS1_HRSTOUTC); |
| } |
| |
| static inline void sysctl_wait(struct clk *clk, |
| unsigned int test, unsigned int reg) |
| { |
| int err = 1000000; |
| |
| do {} while (--err && ((sysctl_r32(clk->module, reg) |
| & clk->bits) != test)); |
| if (!err) |
| pr_err("module de/activation failed %d %08X %08X %08X\n", |
| clk->module, clk->bits, test, |
| sysctl_r32(clk->module, reg) & clk->bits); |
| } |
| |
| static int sysctl_activate(struct clk *clk) |
| { |
| sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN); |
| sysctl_w32(clk->module, clk->bits, SYSCTL_ACT); |
| sysctl_wait(clk, clk->bits, SYSCTL_ACTS); |
| return 0; |
| } |
| |
| static void sysctl_deactivate(struct clk *clk) |
| { |
| sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR); |
| sysctl_w32(clk->module, clk->bits, SYSCTL_DEACT); |
| sysctl_wait(clk, 0, SYSCTL_ACTS); |
| } |
| |
| static int sysctl_clken(struct clk *clk) |
| { |
| sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN); |
| sysctl_wait(clk, clk->bits, SYSCTL_CLKS); |
| return 0; |
| } |
| |
| static void sysctl_clkdis(struct clk *clk) |
| { |
| sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR); |
| sysctl_wait(clk, 0, SYSCTL_CLKS); |
| } |
| |
| static void sysctl_reboot(struct clk *clk) |
| { |
| unsigned int act; |
| unsigned int bits; |
| |
| act = sysctl_r32(clk->module, SYSCTL_ACT); |
| bits = ~act & clk->bits; |
| if (bits != 0) { |
| sysctl_w32(clk->module, bits, SYSCTL_CLKEN); |
| sysctl_w32(clk->module, bits, SYSCTL_ACT); |
| sysctl_wait(clk, bits, SYSCTL_ACTS); |
| } |
| sysctl_w32(clk->module, act & clk->bits, SYSCTL_RBT); |
| sysctl_wait(clk, clk->bits, SYSCTL_ACTS); |
| } |
| |
| /* enable the ONU core */ |
| static void falcon_gpe_enable(void) |
| { |
| unsigned int freq; |
| unsigned int status; |
| |
| /* if if the clock is already enabled */ |
| status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC); |
| if (status & (1 << (GPPC_OFFSET + 1))) |
| return; |
| |
| if (status_r32(STATUS_CONFIG) == 0) |
| freq = 1; /* use 625MHz on unfused chip */ |
| else |
| freq = (status_r32(STATUS_CONFIG) & |
| GPEFREQ_MASK) >> |
| GPEFREQ_OFFSET; |
| |
| /* apply new frequency */ |
| sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1), |
| freq << (GPPC_OFFSET + 2) , SYS1_INFRAC); |
| udelay(1); |
| |
| /* enable new frequency */ |
| sysctl_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC); |
| udelay(1); |
| } |
| |
| static inline void clkdev_add_sys(const char *dev, unsigned int module, |
| unsigned int bits) |
| { |
| struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); |
| |
| clk->cl.dev_id = dev; |
| clk->cl.con_id = NULL; |
| clk->cl.clk = clk; |
| clk->module = module; |
| clk->bits = bits; |
| clk->activate = sysctl_activate; |
| clk->deactivate = sysctl_deactivate; |
| clk->enable = sysctl_clken; |
| clk->disable = sysctl_clkdis; |
| clk->reboot = sysctl_reboot; |
| clkdev_add(&clk->cl); |
| } |
| |
| void __init ltq_soc_init(void) |
| { |
| struct device_node *np_status = |
| of_find_compatible_node(NULL, NULL, "lantiq,status-falcon"); |
| struct device_node *np_ebu = |
| of_find_compatible_node(NULL, NULL, "lantiq,ebu-falcon"); |
| struct device_node *np_sys1 = |
| of_find_compatible_node(NULL, NULL, "lantiq,sys1-falcon"); |
| struct device_node *np_syseth = |
| of_find_compatible_node(NULL, NULL, "lantiq,syseth-falcon"); |
| struct device_node *np_sysgpe = |
| of_find_compatible_node(NULL, NULL, "lantiq,sysgpe-falcon"); |
| struct resource res_status, res_ebu, res_sys[3]; |
| int i; |
| |
| /* check if all the core register ranges are available */ |
| if (!np_status || !np_ebu || !np_sys1 || !np_syseth || !np_sysgpe) |
| panic("Failed to load core nodes from devicetree"); |
| |
| if (of_address_to_resource(np_status, 0, &res_status) || |
| of_address_to_resource(np_ebu, 0, &res_ebu) || |
| of_address_to_resource(np_sys1, 0, &res_sys[0]) || |
| of_address_to_resource(np_syseth, 0, &res_sys[1]) || |
| of_address_to_resource(np_sysgpe, 0, &res_sys[2])) |
| panic("Failed to get core resources"); |
| |
| if ((request_mem_region(res_status.start, resource_size(&res_status), |
| res_status.name) < 0) || |
| (request_mem_region(res_ebu.start, resource_size(&res_ebu), |
| res_ebu.name) < 0) || |
| (request_mem_region(res_sys[0].start, |
| resource_size(&res_sys[0]), |
| res_sys[0].name) < 0) || |
| (request_mem_region(res_sys[1].start, |
| resource_size(&res_sys[1]), |
| res_sys[1].name) < 0) || |
| (request_mem_region(res_sys[2].start, |
| resource_size(&res_sys[2]), |
| res_sys[2].name) < 0)) |
| pr_err("Failed to request core reources"); |
| |
| status_membase = ioremap_nocache(res_status.start, |
| resource_size(&res_status)); |
| ltq_ebu_membase = ioremap_nocache(res_ebu.start, |
| resource_size(&res_ebu)); |
| |
| if (!status_membase || !ltq_ebu_membase) |
| panic("Failed to remap core resources"); |
| |
| for (i = 0; i < 3; i++) { |
| sysctl_membase[i] = ioremap_nocache(res_sys[i].start, |
| resource_size(&res_sys[i])); |
| if (!sysctl_membase[i]) |
| panic("Failed to remap sysctrl resources"); |
| } |
| ltq_sys1_membase = sysctl_membase[0]; |
| |
| falcon_gpe_enable(); |
| |
| /* get our 3 static rates for cpu, fpi and io clocks */ |
| if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV) |
| clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0); |
| else |
| clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0); |
| |
| /* add our clock domains */ |
| clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0); |
| clkdev_add_sys("1d810100.gpio", SYSCTL_SYSETH, ACTS_P2); |
| clkdev_add_sys("1e800100.gpio", SYSCTL_SYS1, ACTS_P1); |
| clkdev_add_sys("1e800200.gpio", SYSCTL_SYS1, ACTS_P3); |
| clkdev_add_sys("1e800300.gpio", SYSCTL_SYS1, ACTS_P4); |
| clkdev_add_sys("1db01000.pad", SYSCTL_SYSETH, ACTS_PADCTRL0); |
| clkdev_add_sys("1db02000.pad", SYSCTL_SYSETH, ACTS_PADCTRL2); |
| clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1); |
| clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3); |
| clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4); |
| clkdev_add_sys("1e100C00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT); |
| clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT); |
| } |