| /* sound/soc/samsung/smartq_wm8987.c |
| * |
| * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com> |
| * |
| * Based on smdk6410_wm8987.c |
| * Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com |
| * Graeme Gregory - graeme.gregory@wolfsonmicro.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/jack.h> |
| |
| #include <asm/mach-types.h> |
| |
| #include "dma.h" |
| #include "i2s.h" |
| |
| #include "../codecs/wm8750.h" |
| |
| /* |
| * WM8987 is register compatible with WM8750, so using that as base driver. |
| */ |
| |
| static struct snd_soc_card snd_soc_smartq; |
| |
| static int smartq_hifi_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| struct snd_soc_dai *cpu_dai = rtd->cpu_dai; |
| unsigned int clk = 0; |
| int ret; |
| |
| switch (params_rate(params)) { |
| case 8000: |
| case 16000: |
| case 32000: |
| case 48000: |
| case 96000: |
| clk = 12288000; |
| break; |
| case 11025: |
| case 22050: |
| case 44100: |
| case 88200: |
| clk = 11289600; |
| break; |
| } |
| |
| /* set codec DAI configuration */ |
| ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBS_CFS); |
| if (ret < 0) |
| return ret; |
| |
| /* set cpu DAI configuration */ |
| ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBS_CFS); |
| if (ret < 0) |
| return ret; |
| |
| /* Use PCLK for I2S signal generation */ |
| ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0, |
| 0, SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| /* Gate the RCLK output on PAD */ |
| ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK, |
| 0, SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| /* set the codec system clock for DAC and ADC */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk, |
| SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* |
| * SmartQ WM8987 HiFi DAI operations. |
| */ |
| static struct snd_soc_ops smartq_hifi_ops = { |
| .hw_params = smartq_hifi_hw_params, |
| }; |
| |
| static struct snd_soc_jack smartq_jack; |
| |
| static struct snd_soc_jack_pin smartq_jack_pins[] = { |
| /* Disable speaker when headphone is plugged in */ |
| { |
| .pin = "Internal Speaker", |
| .mask = SND_JACK_HEADPHONE, |
| }, |
| }; |
| |
| static struct snd_soc_jack_gpio smartq_jack_gpios[] = { |
| { |
| .gpio = S3C64XX_GPL(12), |
| .name = "headphone detect", |
| .report = SND_JACK_HEADPHONE, |
| .debounce_time = 200, |
| }, |
| }; |
| |
| static const struct snd_kcontrol_new wm8987_smartq_controls[] = { |
| SOC_DAPM_PIN_SWITCH("Internal Speaker"), |
| SOC_DAPM_PIN_SWITCH("Headphone Jack"), |
| SOC_DAPM_PIN_SWITCH("Internal Mic"), |
| }; |
| |
| static int smartq_speaker_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, |
| int event) |
| { |
| gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event)); |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = { |
| SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event), |
| SND_SOC_DAPM_HP("Headphone Jack", NULL), |
| SND_SOC_DAPM_MIC("Internal Mic", NULL), |
| }; |
| |
| static const struct snd_soc_dapm_route audio_map[] = { |
| {"Headphone Jack", NULL, "LOUT2"}, |
| {"Headphone Jack", NULL, "ROUT2"}, |
| |
| {"Internal Speaker", NULL, "LOUT2"}, |
| {"Internal Speaker", NULL, "ROUT2"}, |
| |
| {"Mic Bias", NULL, "Internal Mic"}, |
| {"LINPUT2", NULL, "Mic Bias"}, |
| }; |
| |
| static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd) |
| { |
| struct snd_soc_codec *codec = rtd->codec; |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| int err = 0; |
| |
| /* Add SmartQ specific widgets */ |
| snd_soc_dapm_new_controls(dapm, wm8987_dapm_widgets, |
| ARRAY_SIZE(wm8987_dapm_widgets)); |
| |
| /* add SmartQ specific controls */ |
| err = snd_soc_add_controls(codec, wm8987_smartq_controls, |
| ARRAY_SIZE(wm8987_smartq_controls)); |
| |
| if (err < 0) |
| return err; |
| |
| /* setup SmartQ specific audio path */ |
| snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); |
| |
| /* set endpoints to not connected */ |
| snd_soc_dapm_nc_pin(dapm, "LINPUT1"); |
| snd_soc_dapm_nc_pin(dapm, "RINPUT1"); |
| snd_soc_dapm_nc_pin(dapm, "OUT3"); |
| snd_soc_dapm_nc_pin(dapm, "ROUT1"); |
| |
| /* set endpoints to default off mode */ |
| snd_soc_dapm_enable_pin(dapm, "Internal Speaker"); |
| snd_soc_dapm_enable_pin(dapm, "Internal Mic"); |
| snd_soc_dapm_disable_pin(dapm, "Headphone Jack"); |
| |
| err = snd_soc_dapm_sync(dapm); |
| if (err) |
| return err; |
| |
| /* Headphone jack detection */ |
| err = snd_soc_jack_new(codec, "Headphone Jack", |
| SND_JACK_HEADPHONE, &smartq_jack); |
| if (err) |
| return err; |
| |
| err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins), |
| smartq_jack_pins); |
| if (err) |
| return err; |
| |
| err = snd_soc_jack_add_gpios(&smartq_jack, |
| ARRAY_SIZE(smartq_jack_gpios), |
| smartq_jack_gpios); |
| |
| return err; |
| } |
| |
| static struct snd_soc_dai_link smartq_dai[] = { |
| { |
| .name = "wm8987", |
| .stream_name = "SmartQ Hi-Fi", |
| .cpu_dai_name = "samsung-i2s.0", |
| .codec_dai_name = "wm8750-hifi", |
| .platform_name = "samsung-audio", |
| .codec_name = "wm8750-codec.0-0x1a", |
| .init = smartq_wm8987_init, |
| .ops = &smartq_hifi_ops, |
| }, |
| }; |
| |
| static struct snd_soc_card snd_soc_smartq = { |
| .name = "SmartQ", |
| .dai_link = smartq_dai, |
| .num_links = ARRAY_SIZE(smartq_dai), |
| }; |
| |
| static struct platform_device *smartq_snd_device; |
| |
| static int __init smartq_init(void) |
| { |
| int ret; |
| |
| if (!machine_is_smartq7() && !machine_is_smartq5()) { |
| pr_info("Only SmartQ is supported by this ASoC driver\n"); |
| return -ENODEV; |
| } |
| |
| smartq_snd_device = platform_device_alloc("soc-audio", -1); |
| if (!smartq_snd_device) |
| return -ENOMEM; |
| |
| platform_set_drvdata(smartq_snd_device, &snd_soc_smartq); |
| |
| ret = platform_device_add(smartq_snd_device); |
| if (ret) { |
| platform_device_put(smartq_snd_device); |
| return ret; |
| } |
| |
| /* Initialise GPIOs used by amplifiers */ |
| ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown"); |
| if (ret) { |
| dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n"); |
| goto err_unregister_device; |
| } |
| |
| /* Disable amplifiers */ |
| ret = gpio_direction_output(S3C64XX_GPK(12), 1); |
| if (ret) { |
| dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n"); |
| goto err_free_gpio_amp_shut; |
| } |
| |
| return 0; |
| |
| err_free_gpio_amp_shut: |
| gpio_free(S3C64XX_GPK(12)); |
| err_unregister_device: |
| platform_device_unregister(smartq_snd_device); |
| |
| return ret; |
| } |
| |
| static void __exit smartq_exit(void) |
| { |
| gpio_free(S3C64XX_GPK(12)); |
| snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios), |
| smartq_jack_gpios); |
| |
| platform_device_unregister(smartq_snd_device); |
| } |
| |
| module_init(smartq_init); |
| module_exit(smartq_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>"); |
| MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987"); |
| MODULE_LICENSE("GPL"); |