| /* |
| * Copyright 2013 Oliver Schinagl |
| * |
| * Oliver Schinagl <oliver@schinagl.nl> |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /dts-v1/; |
| /include/ "sun7i-a20.dtsi" |
| /include/ "sunxi-common-regulators.dtsi" |
| |
| / { |
| model = "Cubietech Cubietruck"; |
| compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; |
| |
| soc@01c00000 { |
| usbphy: phy@01c13400 { |
| usb1_vbus-supply = <®_usb1_vbus>; |
| usb2_vbus-supply = <®_usb2_vbus>; |
| status = "okay"; |
| }; |
| |
| ehci0: usb@01c14000 { |
| status = "okay"; |
| }; |
| |
| ohci0: usb@01c14400 { |
| status = "okay"; |
| }; |
| |
| ahci: sata@01c18000 { |
| target-supply = <®_ahci_5v>; |
| status = "okay"; |
| }; |
| |
| ehci1: usb@01c1c000 { |
| status = "okay"; |
| }; |
| |
| ohci1: usb@01c1c400 { |
| status = "okay"; |
| }; |
| |
| pinctrl@01c20800 { |
| ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { |
| allwinner,pins = "PH12"; |
| allwinner,function = "gpio_out"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| |
| led_pins_cubietruck: led_pins@0 { |
| allwinner,pins = "PH7", "PH11", "PH20", "PH21"; |
| allwinner,function = "gpio_out"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| }; |
| |
| uart0: serial@01c28000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins_a>; |
| status = "okay"; |
| }; |
| |
| i2c0: i2c@01c2ac00 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins_a>; |
| status = "okay"; |
| }; |
| |
| i2c1: i2c@01c2b000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins_a>; |
| status = "okay"; |
| }; |
| |
| i2c2: i2c@01c2b400 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins_a>; |
| status = "okay"; |
| }; |
| |
| gmac: ethernet@01c50000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gmac_pins_rgmii_a>; |
| phy = <&phy1>; |
| phy-mode = "rgmii"; |
| status = "okay"; |
| |
| phy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&led_pins_cubietruck>; |
| |
| blue { |
| label = "cubietruck:blue:usr"; |
| gpios = <&pio 7 21 0>; |
| }; |
| |
| orange { |
| label = "cubietruck:orange:usr"; |
| gpios = <&pio 7 20 0>; |
| }; |
| |
| white { |
| label = "cubietruck:white:usr"; |
| gpios = <&pio 7 11 0>; |
| }; |
| |
| green { |
| label = "cubietruck:green:usr"; |
| gpios = <&pio 7 7 0>; |
| }; |
| }; |
| |
| reg_ahci_5v: ahci-5v { |
| pinctrl-0 = <&ahci_pwr_pin_cubietruck>; |
| gpio = <&pio 7 12 0>; |
| status = "okay"; |
| }; |
| |
| reg_usb1_vbus: usb1-vbus { |
| status = "okay"; |
| }; |
| |
| reg_usb2_vbus: usb2-vbus { |
| status = "okay"; |
| }; |
| }; |