| |
| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include "imx6q-pinfunc.h" |
| #include "imx6qdl.dtsi" |
| |
| / { |
| aliases { |
| spi4 = &ecspi5; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| operating-points = < |
| /* kHz uV */ |
| 1200000 1275000 |
| 996000 1250000 |
| 852000 1250000 |
| 792000 1150000 |
| 396000 975000 |
| >; |
| fsl,soc-operating-points = < |
| /* ARM kHz SOC-PU uV */ |
| 1200000 1275000 |
| 996000 1250000 |
| 852000 1250000 |
| 792000 1175000 |
| 396000 1175000 |
| >; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clks 104>, <&clks 6>, <&clks 16>, |
| <&clks 17>, <&clks 170>; |
| clock-names = "arm", "pll2_pfd2_396m", "step", |
| "pll1_sw", "pll1_sys"; |
| arm-supply = <®_arm>; |
| pu-supply = <®_pu>; |
| soc-supply = <®_soc>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <1>; |
| next-level-cache = <&L2>; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <2>; |
| next-level-cache = <&L2>; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <3>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| soc { |
| ocram: sram@00900000 { |
| compatible = "mmio-sram"; |
| reg = <0x00900000 0x40000>; |
| clocks = <&clks 142>; |
| }; |
| |
| aips-bus@02000000 { /* AIPS1 */ |
| spba-bus@02000000 { |
| ecspi5: ecspi@02018000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x02018000 0x4000>; |
| interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks 116>, <&clks 116>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| }; |
| |
| iomuxc: iomuxc@020e0000 { |
| compatible = "fsl,imx6q-iomuxc"; |
| |
| ipu2 { |
| pinctrl_ipu2_1: ipu2grp-1 { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10 |
| MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x10 |
| MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x10 |
| MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x10 |
| MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x80000000 |
| MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x10 |
| MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x10 |
| MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x10 |
| MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x10 |
| MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x10 |
| MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x10 |
| MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x10 |
| MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x10 |
| MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x10 |
| MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x10 |
| MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x10 |
| MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x10 |
| MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x10 |
| MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x10 |
| MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x10 |
| MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x10 |
| MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x10 |
| MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x10 |
| MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x10 |
| MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x10 |
| MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x10 |
| MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x10 |
| MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x10 |
| MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x10 |
| >; |
| }; |
| }; |
| }; |
| }; |
| |
| sata: sata@02200000 { |
| compatible = "fsl,imx6q-ahci"; |
| reg = <0x02200000 0x4000>; |
| interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks 154>, <&clks 187>, <&clks 105>; |
| clock-names = "sata", "sata_ref", "ahb"; |
| status = "disabled"; |
| }; |
| |
| ipu2: ipu@02800000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6q-ipu"; |
| reg = <0x02800000 0x400000>; |
| interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, |
| <0 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks 133>, <&clks 134>, <&clks 137>; |
| clock-names = "bus", "di0", "di1"; |
| resets = <&src 4>; |
| |
| ipu2_di0: port@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| ipu2_di0_disp0: endpoint@0 { |
| }; |
| |
| ipu2_di0_hdmi: endpoint@1 { |
| remote-endpoint = <&hdmi_mux_2>; |
| }; |
| |
| ipu2_di0_mipi: endpoint@2 { |
| }; |
| |
| ipu2_di0_lvds0: endpoint@3 { |
| remote-endpoint = <&lvds0_mux_2>; |
| }; |
| |
| ipu2_di0_lvds1: endpoint@4 { |
| remote-endpoint = <&lvds1_mux_2>; |
| }; |
| }; |
| |
| ipu2_di1: port@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| ipu2_di1_hdmi: endpoint@1 { |
| remote-endpoint = <&hdmi_mux_3>; |
| }; |
| |
| ipu2_di1_mipi: endpoint@2 { |
| }; |
| |
| ipu2_di1_lvds0: endpoint@3 { |
| remote-endpoint = <&lvds0_mux_3>; |
| }; |
| |
| ipu2_di1_lvds1: endpoint@4 { |
| remote-endpoint = <&lvds1_mux_3>; |
| }; |
| }; |
| }; |
| }; |
| |
| display-subsystem { |
| compatible = "fsl,imx-display-subsystem"; |
| ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; |
| }; |
| }; |
| |
| &hdmi { |
| compatible = "fsl,imx6q-hdmi"; |
| |
| port@2 { |
| reg = <2>; |
| |
| hdmi_mux_2: endpoint { |
| remote-endpoint = <&ipu2_di0_hdmi>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| |
| hdmi_mux_3: endpoint { |
| remote-endpoint = <&ipu2_di1_hdmi>; |
| }; |
| }; |
| }; |
| |
| &ldb { |
| clocks = <&clks 33>, <&clks 34>, |
| <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>, |
| <&clks 135>, <&clks 136>; |
| clock-names = "di0_pll", "di1_pll", |
| "di0_sel", "di1_sel", "di2_sel", "di3_sel", |
| "di0", "di1"; |
| |
| lvds-channel@0 { |
| port@2 { |
| reg = <2>; |
| |
| lvds0_mux_2: endpoint { |
| remote-endpoint = <&ipu2_di0_lvds0>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| |
| lvds0_mux_3: endpoint { |
| remote-endpoint = <&ipu2_di1_lvds0>; |
| }; |
| }; |
| }; |
| |
| lvds-channel@1 { |
| port@2 { |
| reg = <2>; |
| |
| lvds1_mux_2: endpoint { |
| remote-endpoint = <&ipu2_di0_lvds1>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| |
| lvds1_mux_3: endpoint { |
| remote-endpoint = <&ipu2_di1_lvds1>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mipi_dsi { |
| port@2 { |
| reg = <2>; |
| |
| mipi_mux_2: endpoint { |
| remote-endpoint = <&ipu2_di0_mipi>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| |
| mipi_mux_3: endpoint { |
| remote-endpoint = <&ipu2_di1_mipi>; |
| }; |
| }; |
| }; |
