blob: 1e364ec962fb90ea75573c92fc6a92ec6b25612c [file] [log] [blame]
/*
* driver for NXP USB Host devices
*
* Currently supported OHCI host devices:
* - Philips PNX4008
* - NXP LPC32xx
*
* Authors: Dmitry Chigirev <source@mvista.com>
* Vitaly Wool <vitalywool@gmail.com>
*
* register initialization is based on code examples provided by Philips
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
*
* NOTE: This driver does not have suspend/resume functionality
* This driver is intended for engineering development purposes only
*
* 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/usb/isp1301.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <mach/platform.h>
#include <mach/irqs.h>
#define USB_CONFIG_BASE 0x31020000
#define PWRMAN_BASE 0x40004000
#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
#define USB_DEV_NEED_CLK_EN (1 << 22)
#define USB_HOST_NEED_CLK_EN (1 << 21)
#define PAD_CONTROL_LAST_DRIVEN (1 << 19)
#define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4)
#define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8)
/* USB_OTG_CLK_CTRL bit defines */
#define AHB_M_CLOCK_ON (1 << 4)
#define OTG_CLOCK_ON (1 << 3)
#define I2C_CLOCK_ON (1 << 2)
#define DEV_CLOCK_ON (1 << 1)
#define HOST_CLOCK_ON (1 << 0)
#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110)
/* USB_OTG_STAT_CONTROL bit defines */
#define TRANSPARENT_I2C_EN (1 << 7)
#define HOST_EN (1 << 0)
/* On LPC32xx, those are undefined */
#ifndef start_int_set_falling_edge
#define start_int_set_falling_edge(irq)
#define start_int_set_rising_edge(irq)
#define start_int_ack(irq)
#define start_int_mask(irq)
#define start_int_umask(irq)
#endif
static struct i2c_client *isp1301_i2c_client;
extern int usb_disabled(void);
static struct clk *usb_clk;
static void isp1301_configure_pnx4008(void)
{
/* PNX4008 only supports DAT_SE0 USB mode */
/* PNX4008 R2A requires setting the MAX603 to output 3.6V */
/* Power up externel charge-pump */
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
~(MC1_DAT_SE0 | MC1_SPEED_REG));
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_2,
MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
0xFF);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR,
0xFF);
}
static void isp1301_configure_lpc32xx(void)
{
/* LPC32XX only supports DAT_SE0 USB mode */
/* This sequence is important */
/* Disable transparent UART mode first */
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
MC1_UART_EN);
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
~MC1_SPEED_REG);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_2,
(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_OTG_CONTROL_1,
(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
(OTG1_DM_PULLUP | OTG1_DP_PULLUP));
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
/* Enable usb_need_clk clock after transceiver is initialized */
__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
}
static void isp1301_configure(void)
{
if (machine_is_pnx4008())
isp1301_configure_pnx4008();
else
isp1301_configure_lpc32xx();
}
static inline void isp1301_vbus_on(void)
{
i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
OTG1_VBUS_DRV);
}
static inline void isp1301_vbus_off(void)
{
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
OTG1_VBUS_DRV);
}
static void nxp_start_hc(void)
{
unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
isp1301_vbus_on();
}
static void nxp_stop_hc(void)
{
unsigned long tmp;
isp1301_vbus_off();
tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
}
static int __devinit ohci_nxp_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
if ((ret = ohci_init(ohci)) < 0)
return ret;
if ((ret = ohci_run(ohci)) < 0) {
dev_err(hcd->self.controller, "can't start\n");
ohci_stop(hcd);
return ret;
}
return 0;
}
static const struct hc_driver ohci_nxp_hc_driver = {
.description = hcd_name,
.product_desc = "nxp OHCI",
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* basic lifecycle operations
*/
.start = ohci_nxp_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
static void nxp_set_usb_bits(void)
{
if (machine_is_pnx4008()) {
start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
start_int_ack(SE_USB_OTG_ATX_INT_N);
start_int_umask(SE_USB_OTG_ATX_INT_N);
start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
start_int_ack(SE_USB_OTG_TIMER_INT);
start_int_umask(SE_USB_OTG_TIMER_INT);
start_int_set_rising_edge(SE_USB_I2C_INT);
start_int_ack(SE_USB_I2C_INT);
start_int_umask(SE_USB_I2C_INT);
start_int_set_rising_edge(SE_USB_INT);
start_int_ack(SE_USB_INT);
start_int_umask(SE_USB_INT);
start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
start_int_ack(SE_USB_NEED_CLK_INT);
start_int_umask(SE_USB_NEED_CLK_INT);
start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
start_int_ack(SE_USB_AHB_NEED_CLK_INT);
start_int_umask(SE_USB_AHB_NEED_CLK_INT);
}
}
static void nxp_unset_usb_bits(void)
{
if (machine_is_pnx4008()) {
start_int_mask(SE_USB_OTG_ATX_INT_N);
start_int_mask(SE_USB_OTG_TIMER_INT);
start_int_mask(SE_USB_I2C_INT);
start_int_mask(SE_USB_INT);
start_int_mask(SE_USB_NEED_CLK_INT);
start_int_mask(SE_USB_AHB_NEED_CLK_INT);
}
}
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd = 0;
struct ohci_hcd *ohci;
const struct hc_driver *driver = &ohci_nxp_hc_driver;
struct resource *res;
int ret = 0, irq;
struct device_node *isp1301_node;
if (pdev->dev.of_node) {
isp1301_node = of_parse_phandle(pdev->dev.of_node,
"transceiver", 0);
} else {
isp1301_node = NULL;
}
isp1301_i2c_client = isp1301_get_client(isp1301_node);
if (!isp1301_i2c_client) {
ret = -EPROBE_DEFER;
goto out;
}
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
if (usb_disabled()) {
dev_err(&pdev->dev, "USB is disabled\n");
ret = -ENODEV;
goto out;
}
/* Enable AHB slave USB clock, needed for further USB clock control */
__raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL);
isp1301_configure();
/* Enable USB PLL */
usb_clk = clk_get(&pdev->dev, "ck_pll5");
if (IS_ERR(usb_clk)) {
dev_err(&pdev->dev, "failed to acquire USB PLL\n");
ret = PTR_ERR(usb_clk);
goto out1;
}
ret = clk_enable(usb_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB PLL\n");
goto out2;
}
ret = clk_set_rate(usb_clk, 48000);
if (ret < 0) {
dev_err(&pdev->dev, "failed to set USB clock rate\n");
goto out3;
}
__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
/* Set to enable all needed USB clocks */
__raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL);
while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
USB_CLOCK_MASK) ;
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
ret = -ENOMEM;
goto out3;
}
/* Set all USB bits in the Start Enable register */
nxp_set_usb_bits();
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get MEM resource\n");
ret = -ENOMEM;
goto out4;
}
hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
if (!hcd->regs) {
dev_err(&pdev->dev, "Failed to devm_request_and_ioremap\n");
ret = -ENOMEM;
goto out4;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = -ENXIO;
goto out4;
}
nxp_start_hc();
platform_set_drvdata(pdev, hcd);
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
ret = usb_add_hcd(hcd, irq, 0);
if (ret == 0)
return ret;
nxp_stop_hc();
out4:
nxp_unset_usb_bits();
usb_put_hcd(hcd);
out3:
clk_disable(usb_clk);
out2:
clk_put(usb_clk);
out1:
isp1301_i2c_client = NULL;
out:
return ret;
}
static int usb_hcd_nxp_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
nxp_stop_hc();
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
nxp_unset_usb_bits();
clk_disable(usb_clk);
clk_put(usb_clk);
i2c_unregister_device(isp1301_i2c_client);
isp1301_i2c_client = NULL;
platform_set_drvdata(pdev, NULL);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:usb-ohci");
#ifdef CONFIG_OF
static const struct of_device_id usb_hcd_nxp_match[] = {
{ .compatible = "nxp,ohci-nxp" },
{},
};
MODULE_DEVICE_TABLE(of, usb_hcd_nxp_match);
#endif
static struct platform_driver usb_hcd_nxp_driver = {
.driver = {
.name = "usb-ohci",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(usb_hcd_nxp_match),
},
.probe = usb_hcd_nxp_probe,
.remove = usb_hcd_nxp_remove,
};