| /* |
| * Freescale MXS I2C bus driver |
| * |
| * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. |
| * |
| * based on a (non-working) driver which was: |
| * |
| * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * TODO: add dma-support if platform-support for it is available |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/completion.h> |
| #include <linux/platform_device.h> |
| #include <linux/jiffies.h> |
| #include <linux/io.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/stmp_device.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_i2c.h> |
| |
| #define DRIVER_NAME "mxs-i2c" |
| |
| #define MXS_I2C_CTRL0 (0x00) |
| #define MXS_I2C_CTRL0_SET (0x04) |
| |
| #define MXS_I2C_CTRL0_SFTRST 0x80000000 |
| #define MXS_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000 |
| #define MXS_I2C_CTRL0_RETAIN_CLOCK 0x00200000 |
| #define MXS_I2C_CTRL0_POST_SEND_STOP 0x00100000 |
| #define MXS_I2C_CTRL0_PRE_SEND_START 0x00080000 |
| #define MXS_I2C_CTRL0_MASTER_MODE 0x00020000 |
| #define MXS_I2C_CTRL0_DIRECTION 0x00010000 |
| #define MXS_I2C_CTRL0_XFER_COUNT(v) ((v) & 0x0000FFFF) |
| |
| #define MXS_I2C_CTRL1 (0x40) |
| #define MXS_I2C_CTRL1_SET (0x44) |
| #define MXS_I2C_CTRL1_CLR (0x48) |
| |
| #define MXS_I2C_CTRL1_BUS_FREE_IRQ 0x80 |
| #define MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x40 |
| #define MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x20 |
| #define MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x10 |
| #define MXS_I2C_CTRL1_EARLY_TERM_IRQ 0x08 |
| #define MXS_I2C_CTRL1_MASTER_LOSS_IRQ 0x04 |
| #define MXS_I2C_CTRL1_SLAVE_STOP_IRQ 0x02 |
| #define MXS_I2C_CTRL1_SLAVE_IRQ 0x01 |
| |
| #define MXS_I2C_IRQ_MASK (MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | \ |
| MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ | \ |
| MXS_I2C_CTRL1_EARLY_TERM_IRQ | \ |
| MXS_I2C_CTRL1_MASTER_LOSS_IRQ | \ |
| MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \ |
| MXS_I2C_CTRL1_SLAVE_IRQ) |
| |
| #define MXS_I2C_QUEUECTRL (0x60) |
| #define MXS_I2C_QUEUECTRL_SET (0x64) |
| #define MXS_I2C_QUEUECTRL_CLR (0x68) |
| |
| #define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20 |
| #define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04 |
| |
| #define MXS_I2C_QUEUESTAT (0x70) |
| #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 |
| #define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F |
| |
| #define MXS_I2C_QUEUECMD (0x80) |
| |
| #define MXS_I2C_QUEUEDATA (0x90) |
| |
| #define MXS_I2C_DATA (0xa0) |
| |
| |
| #define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \ |
| MXS_I2C_CTRL0_PRE_SEND_START | \ |
| MXS_I2C_CTRL0_MASTER_MODE | \ |
| MXS_I2C_CTRL0_DIRECTION | \ |
| MXS_I2C_CTRL0_XFER_COUNT(1)) |
| |
| #define MXS_CMD_I2C_WRITE (MXS_I2C_CTRL0_PRE_SEND_START | \ |
| MXS_I2C_CTRL0_MASTER_MODE | \ |
| MXS_I2C_CTRL0_DIRECTION) |
| |
| #define MXS_CMD_I2C_READ (MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \ |
| MXS_I2C_CTRL0_MASTER_MODE) |
| |
| /** |
| * struct mxs_i2c_dev - per device, private MXS-I2C data |
| * |
| * @dev: driver model device node |
| * @regs: IO registers pointer |
| * @cmd_complete: completion object for transaction wait |
| * @cmd_err: error code for last transaction |
| * @adapter: i2c subsystem adapter node |
| */ |
| struct mxs_i2c_dev { |
| struct device *dev; |
| void __iomem *regs; |
| struct completion cmd_complete; |
| u32 cmd_err; |
| struct i2c_adapter adapter; |
| }; |
| |
| static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) |
| { |
| stmp_reset_block(i2c->regs); |
| writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); |
| writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, |
| i2c->regs + MXS_I2C_QUEUECTRL_SET); |
| } |
| |
| static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, |
| int flags) |
| { |
| u32 data; |
| |
| writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD); |
| |
| data = (addr << 1) | I2C_SMBUS_READ; |
| writel(data, i2c->regs + MXS_I2C_DATA); |
| |
| data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags; |
| writel(data, i2c->regs + MXS_I2C_QUEUECMD); |
| } |
| |
| static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, |
| u8 addr, u8 *buf, int len, int flags) |
| { |
| u32 data; |
| int i, shifts_left; |
| |
| data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags; |
| writel(data, i2c->regs + MXS_I2C_QUEUECMD); |
| |
| /* |
| * We have to copy the slave address (u8) and buffer (arbitrary number |
| * of u8) into the data register (u32). To achieve that, the u8 are put |
| * into the MSBs of 'data' which is then shifted for the next u8. When |
| * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 |
| * looks like this: |
| * |
| * 3 2 1 0 |
| * 10987654|32109876|54321098|76543210 |
| * --------+--------+--------+-------- |
| * buffer+2|buffer+1|buffer+0|slave_addr |
| */ |
| |
| data = ((addr << 1) | I2C_SMBUS_WRITE) << 24; |
| |
| for (i = 0; i < len; i++) { |
| data >>= 8; |
| data |= buf[i] << 24; |
| if ((i & 3) == 2) |
| writel(data, i2c->regs + MXS_I2C_DATA); |
| } |
| |
| /* Write out the remaining bytes if any */ |
| shifts_left = 24 - (i & 3) * 8; |
| if (shifts_left) |
| writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA); |
| } |
| |
| /* |
| * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the |
| * rd_threshold to 1). Couldn't get this to work, though. |
| */ |
| static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c) |
| { |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
| |
| while (readl(i2c->regs + MXS_I2C_QUEUESTAT) |
| & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) { |
| if (time_after(jiffies, timeout)) |
| return -ETIMEDOUT; |
| cond_resched(); |
| } |
| |
| return 0; |
| } |
| |
| static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) |
| { |
| u32 data; |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| if ((i & 3) == 0) { |
| if (mxs_i2c_wait_for_data(i2c)) |
| return -ETIMEDOUT; |
| data = readl(i2c->regs + MXS_I2C_QUEUEDATA); |
| } |
| buf[i] = data & 0xff; |
| data >>= 8; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Low level master read/write transaction. |
| */ |
| static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, |
| int stop) |
| { |
| struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); |
| int ret; |
| int flags; |
| |
| dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", |
| msg->addr, msg->len, msg->flags, stop); |
| |
| if (msg->len == 0) |
| return -EINVAL; |
| |
| init_completion(&i2c->cmd_complete); |
| i2c->cmd_err = 0; |
| |
| flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; |
| |
| if (msg->flags & I2C_M_RD) |
| mxs_i2c_pioq_setup_read(i2c, msg->addr, msg->len, flags); |
| else |
| mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, msg->len, |
| flags); |
| |
| writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, |
| i2c->regs + MXS_I2C_QUEUECTRL_SET); |
| |
| ret = wait_for_completion_timeout(&i2c->cmd_complete, |
| msecs_to_jiffies(1000)); |
| if (ret == 0) |
| goto timeout; |
| |
| if ((!i2c->cmd_err) && (msg->flags & I2C_M_RD)) { |
| ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); |
| if (ret) |
| goto timeout; |
| } |
| |
| if (i2c->cmd_err == -ENXIO) |
| mxs_i2c_reset(i2c); |
| else |
| writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, |
| i2c->regs + MXS_I2C_QUEUECTRL_CLR); |
| |
| dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); |
| |
| return i2c->cmd_err; |
| |
| timeout: |
| dev_dbg(i2c->dev, "Timeout!\n"); |
| mxs_i2c_reset(i2c); |
| return -ETIMEDOUT; |
| } |
| |
| static int mxs_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], |
| int num) |
| { |
| int i; |
| int err; |
| |
| for (i = 0; i < num; i++) { |
| err = mxs_i2c_xfer_msg(adap, &msgs[i], i == (num - 1)); |
| if (err) |
| return err; |
| } |
| |
| return num; |
| } |
| |
| static u32 mxs_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); |
| } |
| |
| static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) |
| { |
| struct mxs_i2c_dev *i2c = dev_id; |
| u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; |
| bool is_last_cmd; |
| |
| if (!stat) |
| return IRQ_NONE; |
| |
| if (stat & MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ) |
| i2c->cmd_err = -ENXIO; |
| else if (stat & (MXS_I2C_CTRL1_EARLY_TERM_IRQ | |
| MXS_I2C_CTRL1_MASTER_LOSS_IRQ | |
| MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ)) |
| /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ |
| i2c->cmd_err = -EIO; |
| |
| is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & |
| MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; |
| |
| if (is_last_cmd || i2c->cmd_err) |
| complete(&i2c->cmd_complete); |
| |
| writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct i2c_algorithm mxs_i2c_algo = { |
| .master_xfer = mxs_i2c_xfer, |
| .functionality = mxs_i2c_func, |
| }; |
| |
| static int __devinit mxs_i2c_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mxs_i2c_dev *i2c; |
| struct i2c_adapter *adap; |
| struct pinctrl *pinctrl; |
| struct resource *res; |
| resource_size_t res_size; |
| int err, irq; |
| |
| pinctrl = devm_pinctrl_get_select_default(dev); |
| if (IS_ERR(pinctrl)) |
| return PTR_ERR(pinctrl); |
| |
| i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL); |
| if (!i2c) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -ENOENT; |
| |
| res_size = resource_size(res); |
| if (!devm_request_mem_region(dev, res->start, res_size, res->name)) |
| return -EBUSY; |
| |
| i2c->regs = devm_ioremap_nocache(dev, res->start, res_size); |
| if (!i2c->regs) |
| return -EBUSY; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c); |
| if (err) |
| return err; |
| |
| i2c->dev = dev; |
| platform_set_drvdata(pdev, i2c); |
| |
| /* Do reset to enforce correct startup after pinmuxing */ |
| mxs_i2c_reset(i2c); |
| |
| adap = &i2c->adapter; |
| strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name)); |
| adap->owner = THIS_MODULE; |
| adap->algo = &mxs_i2c_algo; |
| adap->dev.parent = dev; |
| adap->nr = pdev->id; |
| adap->dev.of_node = pdev->dev.of_node; |
| i2c_set_adapdata(adap, i2c); |
| err = i2c_add_numbered_adapter(adap); |
| if (err) { |
| dev_err(dev, "Failed to add adapter (%d)\n", err); |
| writel(MXS_I2C_CTRL0_SFTRST, |
| i2c->regs + MXS_I2C_CTRL0_SET); |
| return err; |
| } |
| |
| of_i2c_register_devices(adap); |
| |
| return 0; |
| } |
| |
| static int __devexit mxs_i2c_remove(struct platform_device *pdev) |
| { |
| struct mxs_i2c_dev *i2c = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = i2c_del_adapter(&i2c->adapter); |
| if (ret) |
| return -EBUSY; |
| |
| writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mxs_i2c_dt_ids[] = { |
| { .compatible = "fsl,imx28-i2c", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mxs_i2c_dt_ids); |
| |
| static struct platform_driver mxs_i2c_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = mxs_i2c_dt_ids, |
| }, |
| .remove = __devexit_p(mxs_i2c_remove), |
| }; |
| |
| static int __init mxs_i2c_init(void) |
| { |
| return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe); |
| } |
| subsys_initcall(mxs_i2c_init); |
| |
| static void __exit mxs_i2c_exit(void) |
| { |
| platform_driver_unregister(&mxs_i2c_driver); |
| } |
| module_exit(mxs_i2c_exit); |
| |
| MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); |
| MODULE_DESCRIPTION("MXS I2C Bus Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |