| /* |
| smsc47b397.c - Part of lm_sensors, Linux kernel modules |
| for hardware monitoring |
| |
| Supports the SMSC LPC47B397-NC Super-I/O chip. |
| |
| Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com> |
| Copyright (C) 2004 Utilitek Systems, Inc. |
| |
| derived in part from smsc47m1.c: |
| Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> |
| Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/ioport.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-sensor.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| |
| static unsigned short normal_i2c[] = { I2C_CLIENT_END }; |
| /* Address is autodetected, there is no default value */ |
| static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; |
| static struct i2c_force_data forces[] = {{NULL}}; |
| |
| enum chips { any_chip, smsc47b397 }; |
| static struct i2c_address_data addr_data = { |
| .normal_i2c = normal_i2c, |
| .normal_isa = normal_isa, |
| .probe = normal_i2c, /* cheat */ |
| .ignore = normal_i2c, /* cheat */ |
| .forces = forces, |
| }; |
| |
| /* Super-I/0 registers and commands */ |
| |
| #define REG 0x2e /* The register to read/write */ |
| #define VAL 0x2f /* The value to read/write */ |
| |
| static inline void superio_outb(int reg, int val) |
| { |
| outb(reg, REG); |
| outb(val, VAL); |
| } |
| |
| static inline int superio_inb(int reg) |
| { |
| outb(reg, REG); |
| return inb(VAL); |
| } |
| |
| /* select superio logical device */ |
| static inline void superio_select(int ld) |
| { |
| superio_outb(0x07, ld); |
| } |
| |
| static inline void superio_enter(void) |
| { |
| outb(0x55, REG); |
| } |
| |
| static inline void superio_exit(void) |
| { |
| outb(0xAA, REG); |
| } |
| |
| #define SUPERIO_REG_DEVID 0x20 |
| #define SUPERIO_REG_DEVREV 0x21 |
| #define SUPERIO_REG_BASE_MSB 0x60 |
| #define SUPERIO_REG_BASE_LSB 0x61 |
| #define SUPERIO_REG_LD8 0x08 |
| |
| #define SMSC_EXTENT 0x02 |
| |
| /* 0 <= nr <= 3 */ |
| static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80}; |
| #define SMSC47B397_REG_TEMP(nr) (smsc47b397_reg_temp[(nr)]) |
| |
| /* 0 <= nr <= 3 */ |
| #define SMSC47B397_REG_FAN_LSB(nr) (0x28 + 2 * (nr)) |
| #define SMSC47B397_REG_FAN_MSB(nr) (0x29 + 2 * (nr)) |
| |
| struct smsc47b397_data { |
| struct i2c_client client; |
| struct semaphore lock; |
| |
| struct semaphore update_lock; |
| unsigned long last_updated; /* in jiffies */ |
| int valid; |
| |
| /* register values */ |
| u16 fan[4]; |
| u8 temp[4]; |
| }; |
| |
| static int smsc47b397_read_value(struct i2c_client *client, u8 reg) |
| { |
| struct smsc47b397_data *data = i2c_get_clientdata(client); |
| int res; |
| |
| down(&data->lock); |
| outb(reg, client->addr); |
| res = inb_p(client->addr + 1); |
| up(&data->lock); |
| return res; |
| } |
| |
| static struct smsc47b397_data *smsc47b397_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct smsc47b397_data *data = i2c_get_clientdata(client); |
| int i; |
| |
| down(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| dev_dbg(&client->dev, "starting device update...\n"); |
| |
| /* 4 temperature inputs, 4 fan inputs */ |
| for (i = 0; i < 4; i++) { |
| data->temp[i] = smsc47b397_read_value(client, |
| SMSC47B397_REG_TEMP(i)); |
| |
| /* must read LSB first */ |
| data->fan[i] = smsc47b397_read_value(client, |
| SMSC47B397_REG_FAN_LSB(i)); |
| data->fan[i] |= smsc47b397_read_value(client, |
| SMSC47B397_REG_FAN_MSB(i)) << 8; |
| } |
| |
| data->last_updated = jiffies; |
| data->valid = 1; |
| |
| dev_dbg(&client->dev, "... device update complete\n"); |
| } |
| |
| up(&data->update_lock); |
| |
| return data; |
| } |
| |
| /* TEMP: 0.001C/bit (-128C to +127C) |
| REG: 1C/bit, two's complement */ |
| static int temp_from_reg(u8 reg) |
| { |
| return (s8)reg * 1000; |
| } |
| |
| /* 0 <= nr <= 3 */ |
| static ssize_t show_temp(struct device *dev, char *buf, int nr) |
| { |
| struct smsc47b397_data *data = smsc47b397_update_device(dev); |
| return sprintf(buf, "%d\n", temp_from_reg(data->temp[nr])); |
| } |
| |
| #define sysfs_temp(num) \ |
| static ssize_t show_temp##num(struct device *dev, char *buf) \ |
| { \ |
| return show_temp(dev, buf, num-1); \ |
| } \ |
| static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL) |
| |
| sysfs_temp(1); |
| sysfs_temp(2); |
| sysfs_temp(3); |
| sysfs_temp(4); |
| |
| #define device_create_file_temp(client, num) \ |
| device_create_file(&client->dev, &dev_attr_temp##num##_input) |
| |
| /* FAN: 1 RPM/bit |
| REG: count of 90kHz pulses / revolution */ |
| static int fan_from_reg(u16 reg) |
| { |
| return 90000 * 60 / reg; |
| } |
| |
| /* 0 <= nr <= 3 */ |
| static ssize_t show_fan(struct device *dev, char *buf, int nr) |
| { |
| struct smsc47b397_data *data = smsc47b397_update_device(dev); |
| return sprintf(buf, "%d\n", fan_from_reg(data->fan[nr])); |
| } |
| |
| #define sysfs_fan(num) \ |
| static ssize_t show_fan##num(struct device *dev, char *buf) \ |
| { \ |
| return show_fan(dev, buf, num-1); \ |
| } \ |
| static DEVICE_ATTR(fan##num##_input, S_IRUGO, show_fan##num, NULL) |
| |
| sysfs_fan(1); |
| sysfs_fan(2); |
| sysfs_fan(3); |
| sysfs_fan(4); |
| |
| #define device_create_file_fan(client, num) \ |
| device_create_file(&client->dev, &dev_attr_fan##num##_input) |
| |
| static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind); |
| |
| static int smsc47b397_attach_adapter(struct i2c_adapter *adapter) |
| { |
| if (!(adapter->class & I2C_CLASS_HWMON)) |
| return 0; |
| return i2c_detect(adapter, &addr_data, smsc47b397_detect); |
| } |
| |
| static int smsc47b397_detach_client(struct i2c_client *client) |
| { |
| int err; |
| |
| if ((err = i2c_detach_client(client))) { |
| dev_err(&client->dev, "Client deregistration failed, " |
| "client not detached.\n"); |
| return err; |
| } |
| |
| release_region(client->addr, SMSC_EXTENT); |
| kfree(i2c_get_clientdata(client)); |
| |
| return 0; |
| } |
| |
| static struct i2c_driver smsc47b397_driver = { |
| .owner = THIS_MODULE, |
| .name = "smsc47b397", |
| .id = I2C_DRIVERID_SMSC47B397, |
| .flags = I2C_DF_NOTIFY, |
| .attach_adapter = smsc47b397_attach_adapter, |
| .detach_client = smsc47b397_detach_client, |
| }; |
| |
| static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) |
| { |
| struct i2c_client *new_client; |
| struct smsc47b397_data *data; |
| int err = 0; |
| |
| if (!i2c_is_isa_adapter(adapter)) { |
| return 0; |
| } |
| |
| if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) { |
| dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr); |
| return -EBUSY; |
| } |
| |
| if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) { |
| err = -ENOMEM; |
| goto error_release; |
| } |
| memset(data, 0x00, sizeof(struct smsc47b397_data)); |
| |
| new_client = &data->client; |
| i2c_set_clientdata(new_client, data); |
| new_client->addr = addr; |
| init_MUTEX(&data->lock); |
| new_client->adapter = adapter; |
| new_client->driver = &smsc47b397_driver; |
| new_client->flags = 0; |
| |
| strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE); |
| |
| init_MUTEX(&data->update_lock); |
| |
| if ((err = i2c_attach_client(new_client))) |
| goto error_free; |
| |
| device_create_file_temp(new_client, 1); |
| device_create_file_temp(new_client, 2); |
| device_create_file_temp(new_client, 3); |
| device_create_file_temp(new_client, 4); |
| |
| device_create_file_fan(new_client, 1); |
| device_create_file_fan(new_client, 2); |
| device_create_file_fan(new_client, 3); |
| device_create_file_fan(new_client, 4); |
| |
| return 0; |
| |
| error_free: |
| kfree(new_client); |
| error_release: |
| release_region(addr, SMSC_EXTENT); |
| return err; |
| } |
| |
| static int __init smsc47b397_find(unsigned int *addr) |
| { |
| u8 id, rev; |
| |
| superio_enter(); |
| id = superio_inb(SUPERIO_REG_DEVID); |
| |
| if (id != 0x6f) { |
| superio_exit(); |
| return -ENODEV; |
| } |
| |
| rev = superio_inb(SUPERIO_REG_DEVREV); |
| |
| superio_select(SUPERIO_REG_LD8); |
| *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) |
| | superio_inb(SUPERIO_REG_BASE_LSB); |
| |
| printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC " |
| "(base address 0x%04x, revision %u)\n", *addr, rev); |
| |
| superio_exit(); |
| return 0; |
| } |
| |
| static int __init smsc47b397_init(void) |
| { |
| int ret; |
| |
| if ((ret = smsc47b397_find(normal_isa))) |
| return ret; |
| |
| return i2c_add_driver(&smsc47b397_driver); |
| } |
| |
| static void __exit smsc47b397_exit(void) |
| { |
| i2c_del_driver(&smsc47b397_driver); |
| } |
| |
| MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); |
| MODULE_DESCRIPTION("SMSC LPC47B397 driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(smsc47b397_init); |
| module_exit(smsc47b397_exit); |