| /* |
| * arch/ppc64/kernel/pSeries_iommu.c |
| * |
| * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation |
| * |
| * Rewrite, cleanup: |
| * |
| * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation |
| * |
| * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/rtas.h> |
| #include <asm/ppcdebug.h> |
| #include <asm/iommu.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/abs_addr.h> |
| #include <asm/plpar_wrappers.h> |
| #include <asm/pSeries_reconfig.h> |
| #include <asm/systemcfg.h> |
| #include "pci.h" |
| |
| #define DBG(fmt...) |
| |
| extern int is_python(struct device_node *); |
| |
| static void tce_build_pSeries(struct iommu_table *tbl, long index, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction) |
| { |
| union tce_entry t; |
| union tce_entry *tp; |
| |
| t.te_word = 0; |
| t.te_rdwr = 1; // Read allowed |
| |
| if (direction != DMA_TO_DEVICE) |
| t.te_pciwr = 1; |
| |
| tp = ((union tce_entry *)tbl->it_base) + index; |
| |
| while (npages--) { |
| /* can't move this out since we might cross LMB boundary */ |
| t.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT; |
| |
| tp->te_word = t.te_word; |
| |
| uaddr += PAGE_SIZE; |
| tp++; |
| } |
| } |
| |
| |
| static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) |
| { |
| union tce_entry t; |
| union tce_entry *tp; |
| |
| t.te_word = 0; |
| tp = ((union tce_entry *)tbl->it_base) + index; |
| |
| while (npages--) { |
| tp->te_word = t.te_word; |
| |
| tp++; |
| } |
| } |
| |
| |
| static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction) |
| { |
| u64 rc; |
| union tce_entry tce; |
| |
| tce.te_word = 0; |
| tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT; |
| tce.te_rdwr = 1; |
| if (direction != DMA_TO_DEVICE) |
| tce.te_pciwr = 1; |
| |
| while (npages--) { |
| rc = plpar_tce_put((u64)tbl->it_index, |
| (u64)tcenum << 12, |
| tce.te_word ); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); |
| printk("\tindex = 0x%lx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%lx\n", (u64)tcenum); |
| printk("\ttce val = 0x%lx\n", tce.te_word ); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| tcenum++; |
| tce.te_rpn++; |
| } |
| } |
| |
| static DEFINE_PER_CPU(void *, tce_page) = NULL; |
| |
| static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction) |
| { |
| u64 rc; |
| union tce_entry tce, *tcep; |
| long l, limit; |
| |
| if (npages == 1) |
| return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, |
| direction); |
| |
| tcep = __get_cpu_var(tce_page); |
| |
| /* This is safe to do since interrupts are off when we're called |
| * from iommu_alloc{,_sg}() |
| */ |
| if (!tcep) { |
| tcep = (void *)__get_free_page(GFP_ATOMIC); |
| /* If allocation fails, fall back to the loop implementation */ |
| if (!tcep) |
| return tce_build_pSeriesLP(tbl, tcenum, npages, |
| uaddr, direction); |
| __get_cpu_var(tce_page) = tcep; |
| } |
| |
| tce.te_word = 0; |
| tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT; |
| tce.te_rdwr = 1; |
| if (direction != DMA_TO_DEVICE) |
| tce.te_pciwr = 1; |
| |
| /* We can map max one pageful of TCEs at a time */ |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, npages, PAGE_SIZE/sizeof(union tce_entry)); |
| |
| for (l = 0; l < limit; l++) { |
| tcep[l] = tce; |
| tce.te_rpn++; |
| } |
| |
| rc = plpar_tce_put_indirect((u64)tbl->it_index, |
| (u64)tcenum << 12, |
| (u64)virt_to_abs(tcep), |
| limit); |
| |
| npages -= limit; |
| tcenum += limit; |
| } while (npages > 0 && !rc); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); |
| printk("\tindex = 0x%lx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%lx\n", (u64)npages); |
| printk("\ttce[0] val = 0x%lx\n", tcep[0].te_word); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| } |
| |
| static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) |
| { |
| u64 rc; |
| union tce_entry tce; |
| |
| tce.te_word = 0; |
| |
| while (npages--) { |
| rc = plpar_tce_put((u64)tbl->it_index, |
| (u64)tcenum << 12, |
| tce.te_word); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); |
| printk("\tindex = 0x%lx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%lx\n", (u64)tcenum); |
| printk("\ttce val = 0x%lx\n", tce.te_word ); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| |
| tcenum++; |
| } |
| } |
| |
| |
| static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) |
| { |
| u64 rc; |
| union tce_entry tce; |
| |
| tce.te_word = 0; |
| |
| rc = plpar_tce_stuff((u64)tbl->it_index, |
| (u64)tcenum << 12, |
| tce.te_word, |
| npages); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n"); |
| printk("\trc = %ld\n", rc); |
| printk("\tindex = 0x%lx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%lx\n", (u64)npages); |
| printk("\ttce val = 0x%lx\n", tce.te_word ); |
| show_stack(current, (unsigned long *)__get_SP()); |
| } |
| } |
| |
| static void iommu_table_setparms(struct pci_controller *phb, |
| struct device_node *dn, |
| struct iommu_table *tbl) |
| { |
| struct device_node *node; |
| unsigned long *basep; |
| unsigned int *sizep; |
| |
| node = (struct device_node *)phb->arch_data; |
| |
| basep = (unsigned long *)get_property(node, "linux,tce-base", NULL); |
| sizep = (unsigned int *)get_property(node, "linux,tce-size", NULL); |
| if (basep == NULL || sizep == NULL) { |
| printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has " |
| "missing tce entries !\n", dn->full_name); |
| return; |
| } |
| |
| tbl->it_base = (unsigned long)__va(*basep); |
| memset((void *)tbl->it_base, 0, *sizep); |
| |
| tbl->it_busno = phb->bus->number; |
| |
| /* Units of tce entries */ |
| tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT; |
| |
| /* Test if we are going over 2GB of DMA space */ |
| if (phb->dma_window_base_cur + phb->dma_window_size > (1L << 31)) |
| panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); |
| |
| phb->dma_window_base_cur += phb->dma_window_size; |
| |
| /* Set the tce table size - measured in entries */ |
| tbl->it_size = phb->dma_window_size >> PAGE_SHIFT; |
| |
| tbl->it_index = 0; |
| tbl->it_blocksize = 16; |
| tbl->it_type = TCE_PCI; |
| } |
| |
| /* |
| * iommu_table_setparms_lpar |
| * |
| * Function: On pSeries LPAR systems, return TCE table info, given a pci bus. |
| * |
| * ToDo: properly interpret the ibm,dma-window property. The definition is: |
| * logical-bus-number (1 word) |
| * phys-address (#address-cells words) |
| * size (#cell-size words) |
| * |
| * Currently we hard code these sizes (more or less). |
| */ |
| static void iommu_table_setparms_lpar(struct pci_controller *phb, |
| struct device_node *dn, |
| struct iommu_table *tbl, |
| unsigned int *dma_window) |
| { |
| tbl->it_busno = dn->bussubno; |
| |
| /* TODO: Parse field size properties properly. */ |
| tbl->it_size = (((unsigned long)dma_window[4] << 32) | |
| (unsigned long)dma_window[5]) >> PAGE_SHIFT; |
| tbl->it_offset = (((unsigned long)dma_window[2] << 32) | |
| (unsigned long)dma_window[3]) >> PAGE_SHIFT; |
| tbl->it_base = 0; |
| tbl->it_index = dma_window[0]; |
| tbl->it_blocksize = 16; |
| tbl->it_type = TCE_PCI; |
| } |
| |
| static void iommu_bus_setup_pSeries(struct pci_bus *bus) |
| { |
| struct device_node *dn, *pdn; |
| struct iommu_table *tbl; |
| |
| DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self); |
| |
| /* For each (root) bus, we carve up the available DMA space in 256MB |
| * pieces. Since each piece is used by one (sub) bus/device, that would |
| * give a maximum of 7 devices per PHB. In most cases, this is plenty. |
| * |
| * The exception is on Python PHBs (pre-POWER4). Here we don't have EADS |
| * bridges below the PHB to allocate the sectioned tables to, so instead |
| * we allocate a 1GB table at the PHB level. |
| */ |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| if (!bus->self) { |
| /* Root bus */ |
| if (is_python(dn)) { |
| unsigned int *iohole; |
| |
| DBG("Python root bus %s\n", bus->name); |
| |
| iohole = (unsigned int *)get_property(dn, "io-hole", 0); |
| |
| if (iohole) { |
| /* On first bus we need to leave room for the |
| * ISA address space. Just skip the first 256MB |
| * alltogether. This leaves 768MB for the window. |
| */ |
| DBG("PHB has io-hole, reserving 256MB\n"); |
| dn->phb->dma_window_size = 3 << 28; |
| dn->phb->dma_window_base_cur = 1 << 28; |
| } else { |
| /* 1GB window by default */ |
| dn->phb->dma_window_size = 1 << 30; |
| dn->phb->dma_window_base_cur = 0; |
| } |
| |
| tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); |
| |
| iommu_table_setparms(dn->phb, dn, tbl); |
| dn->iommu_table = iommu_init_table(tbl); |
| } else { |
| /* Do a 128MB table at root. This is used for the IDE |
| * controller on some SMP-mode POWER4 machines. It |
| * doesn't hurt to allocate it on other machines |
| * -- it'll just be unused since new tables are |
| * allocated on the EADS level. |
| * |
| * Allocate at offset 128MB to avoid having to deal |
| * with ISA holes; 128MB table for IDE is plenty. |
| */ |
| dn->phb->dma_window_size = 1 << 27; |
| dn->phb->dma_window_base_cur = 1 << 27; |
| |
| tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); |
| |
| iommu_table_setparms(dn->phb, dn, tbl); |
| dn->iommu_table = iommu_init_table(tbl); |
| |
| /* All child buses have 256MB tables */ |
| dn->phb->dma_window_size = 1 << 28; |
| } |
| } else { |
| pdn = pci_bus_to_OF_node(bus->parent); |
| |
| if (!bus->parent->self && !is_python(pdn)) { |
| struct iommu_table *tbl; |
| /* First child and not python means this is the EADS |
| * level. Allocate new table for this slot with 256MB |
| * window. |
| */ |
| |
| tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); |
| |
| iommu_table_setparms(dn->phb, dn, tbl); |
| |
| dn->iommu_table = iommu_init_table(tbl); |
| } else { |
| /* Lower than first child or under python, use parent table */ |
| dn->iommu_table = pdn->iommu_table; |
| } |
| } |
| } |
| |
| |
| static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) |
| { |
| struct iommu_table *tbl; |
| struct device_node *dn, *pdn; |
| unsigned int *dma_window = NULL; |
| |
| DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self); |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| /* Find nearest ibm,dma-window, walking up the device tree */ |
| for (pdn = dn; pdn != NULL; pdn = pdn->parent) { |
| dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL); |
| if (dma_window != NULL) |
| break; |
| } |
| |
| if (dma_window == NULL) { |
| DBG("iommu_bus_setup_pSeriesLP: bus %s seems to have no ibm,dma-window property\n", dn->full_name); |
| return; |
| } |
| |
| if (!pdn->iommu_table) { |
| /* Bussubno hasn't been copied yet. |
| * Do it now because iommu_table_setparms_lpar needs it. |
| */ |
| pdn->bussubno = bus->number; |
| |
| tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), |
| GFP_KERNEL); |
| |
| iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window); |
| |
| pdn->iommu_table = iommu_init_table(tbl); |
| } |
| |
| if (pdn != dn) |
| dn->iommu_table = pdn->iommu_table; |
| } |
| |
| |
| static void iommu_dev_setup_pSeries(struct pci_dev *dev) |
| { |
| struct device_node *dn, *mydn; |
| |
| DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name); |
| /* Now copy the iommu_table ptr from the bus device down to the |
| * pci device_node. This means get_iommu_table() won't need to search |
| * up the device tree to find it. |
| */ |
| mydn = dn = pci_device_to_OF_node(dev); |
| |
| while (dn && dn->iommu_table == NULL) |
| dn = dn->parent; |
| |
| if (dn) { |
| mydn->iommu_table = dn->iommu_table; |
| } else { |
| DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name); |
| } |
| } |
| |
| static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) |
| { |
| int err = NOTIFY_OK; |
| struct device_node *np = node; |
| |
| switch (action) { |
| case PSERIES_RECONFIG_REMOVE: |
| if (np->iommu_table && |
| get_property(np, "ibm,dma-window", NULL)) |
| iommu_free_table(np); |
| break; |
| default: |
| err = NOTIFY_DONE; |
| break; |
| } |
| return err; |
| } |
| |
| static struct notifier_block iommu_reconfig_nb = { |
| .notifier_call = iommu_reconfig_notifier, |
| }; |
| |
| static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) |
| { |
| struct device_node *pdn, *dn; |
| struct iommu_table *tbl; |
| int *dma_window = NULL; |
| |
| DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name); |
| |
| /* dev setup for LPAR is a little tricky, since the device tree might |
| * contain the dma-window properties per-device and not neccesarily |
| * for the bus. So we need to search upwards in the tree until we |
| * either hit a dma-window property, OR find a parent with a table |
| * already allocated. |
| */ |
| dn = pci_device_to_OF_node(dev); |
| |
| for (pdn = dn; pdn && !pdn->iommu_table; pdn = pdn->parent) { |
| dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL); |
| if (dma_window) |
| break; |
| } |
| |
| /* Check for parent == NULL so we don't try to setup the empty EADS |
| * slots on POWER4 machines. |
| */ |
| if (dma_window == NULL || pdn->parent == NULL) { |
| /* Fall back to regular (non-LPAR) dev setup */ |
| DBG("No dma window for device, falling back to regular setup\n"); |
| iommu_dev_setup_pSeries(dev); |
| return; |
| } else { |
| DBG("Found DMA window, allocating table\n"); |
| } |
| |
| if (!pdn->iommu_table) { |
| /* iommu_table_setparms_lpar needs bussubno. */ |
| pdn->bussubno = pdn->phb->bus->number; |
| |
| tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), |
| GFP_KERNEL); |
| |
| iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window); |
| |
| pdn->iommu_table = iommu_init_table(tbl); |
| } |
| |
| if (pdn != dn) |
| dn->iommu_table = pdn->iommu_table; |
| } |
| |
| static void iommu_bus_setup_null(struct pci_bus *b) { } |
| static void iommu_dev_setup_null(struct pci_dev *d) { } |
| |
| /* These are called very early. */ |
| void iommu_init_early_pSeries(void) |
| { |
| if (of_chosen && get_property(of_chosen, "linux,iommu-off", NULL)) { |
| /* Direct I/O, IOMMU off */ |
| ppc_md.iommu_dev_setup = iommu_dev_setup_null; |
| ppc_md.iommu_bus_setup = iommu_bus_setup_null; |
| pci_direct_iommu_init(); |
| |
| return; |
| } |
| |
| if (systemcfg->platform & PLATFORM_LPAR) { |
| if (cur_cpu_spec->firmware_features & FW_FEATURE_MULTITCE) { |
| ppc_md.tce_build = tce_buildmulti_pSeriesLP; |
| ppc_md.tce_free = tce_freemulti_pSeriesLP; |
| } else { |
| ppc_md.tce_build = tce_build_pSeriesLP; |
| ppc_md.tce_free = tce_free_pSeriesLP; |
| } |
| ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP; |
| ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP; |
| } else { |
| ppc_md.tce_build = tce_build_pSeries; |
| ppc_md.tce_free = tce_free_pSeries; |
| ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries; |
| ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries; |
| } |
| |
| |
| pSeries_reconfig_notifier_register(&iommu_reconfig_nb); |
| |
| pci_iommu_init(); |
| } |
| |