| /* |
| * Driver for the NXP SAA7164 PCIe bridge |
| * |
| * Copyright (c) 2009 Steven Toth <stoth@kernellabs.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kmod.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <asm/div64.h> |
| |
| #include "saa7164.h" |
| |
| MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards"); |
| MODULE_AUTHOR("Steven Toth <stoth@kernellabs.com>"); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| 1 Basic |
| 2 |
| 4 i2c |
| 8 api |
| 16 cmd |
| 32 bus |
| */ |
| |
| unsigned int saa_debug; |
| module_param_named(debug, saa_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages"); |
| |
| unsigned int waitsecs = 10; |
| module_param(waitsecs, int, 0644); |
| MODULE_PARM_DESC(debug, "timeout on firmware messages"); |
| |
| static unsigned int card[] = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET }; |
| module_param_array(card, int, NULL, 0444); |
| MODULE_PARM_DESC(card, "card type"); |
| |
| static unsigned int saa7164_devcount; |
| |
| static DEFINE_MUTEX(devlist); |
| LIST_HEAD(saa7164_devlist); |
| |
| #define INT_SIZE 16 |
| |
| static void saa7164_work_cmdhandler(struct work_struct *w) |
| { |
| struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd); |
| |
| /* Wake up any complete commands */ |
| saa7164_irq_dequeue(dev); |
| } |
| |
| static void saa7164_buffer_deliver(struct saa7164_buffer *buf) |
| { |
| struct saa7164_tsport *port = buf->port; |
| |
| /* Feed the transport payload into the kernel demux */ |
| dvb_dmx_swfilter_packets(&port->dvb.demux, (u8 *)buf->cpu, |
| SAA7164_TS_NUMBER_OF_LINES); |
| |
| } |
| |
| static irqreturn_t saa7164_irq_ts(struct saa7164_tsport *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| struct saa7164_buffer *buf; |
| struct list_head *c, *n; |
| int wp, i = 0, rp; |
| |
| /* Find the current write point from the hardware */ |
| wp = saa7164_readl(port->bufcounter); |
| if (wp > (port->hwcfg.buffercount - 1)) |
| BUG(); |
| |
| /* Find the previous buffer to the current write point */ |
| if (wp == 0) |
| rp = 7; |
| else |
| rp = wp - 1; |
| |
| /* Lookup the WP in the buffer list */ |
| /* TODO: turn this into a worker thread */ |
| list_for_each_safe(c, n, &port->dmaqueue.list) { |
| buf = list_entry(c, struct saa7164_buffer, list); |
| if (i++ > port->hwcfg.buffercount) |
| BUG(); |
| |
| if (buf->nr == rp) { |
| /* Found the buffer, deal with it */ |
| dprintk(DBGLVL_IRQ, "%s() wp: %d processing: %d\n", |
| __func__, wp, rp); |
| saa7164_buffer_deliver(buf); |
| break; |
| } |
| |
| } |
| return 0; |
| } |
| |
| /* Primary IRQ handler and dispatch mechanism */ |
| static irqreturn_t saa7164_irq(int irq, void *dev_id) |
| { |
| struct saa7164_dev *dev = dev_id; |
| u32 intid, intstat[INT_SIZE/4]; |
| int i, handled = 0, bit; |
| |
| if (dev == 0) { |
| printk(KERN_ERR "%s() No device specified\n", __func__); |
| handled = 0; |
| goto out; |
| } |
| |
| /* Check that the hardware is accessable. If the status bytes are |
| * 0xFF then the device is not accessable, the the IRQ belongs |
| * to another driver. |
| * 4 x u32 interrupt registers. |
| */ |
| for (i = 0; i < INT_SIZE/4; i++) { |
| |
| /* TODO: Convert into saa7164_readl() */ |
| /* Read the 4 hardware interrupt registers */ |
| intstat[i] = saa7164_readl(dev->int_status + (i * 4)); |
| |
| if (intstat[i]) |
| handled = 1; |
| } |
| if (handled == 0) |
| goto out; |
| |
| /* For each of the HW interrupt registers */ |
| for (i = 0; i < INT_SIZE/4; i++) { |
| |
| if (intstat[i]) { |
| /* Each function of the board has it's own interruptid. |
| * Find the function that triggered then call |
| * it's handler. |
| */ |
| for (bit = 0; bit < 32; bit++) { |
| |
| if (((intstat[i] >> bit) & 0x00000001) == 0) |
| continue; |
| |
| /* Calculate the interrupt id (0x00 to 0x7f) */ |
| |
| intid = (i * 32) + bit; |
| if (intid == dev->intfdesc.bInterruptId) { |
| /* A response to an cmd/api call */ |
| schedule_work(&dev->workcmd); |
| } else if (intid == |
| dev->ts1.hwcfg.interruptid) { |
| |
| /* Transport path 1 */ |
| saa7164_irq_ts(&dev->ts1); |
| |
| } else if (intid == |
| dev->ts2.hwcfg.interruptid) { |
| |
| /* Transport path 2 */ |
| saa7164_irq_ts(&dev->ts2); |
| |
| } else { |
| /* Find the function */ |
| dprintk(DBGLVL_IRQ, |
| "%s() unhandled interrupt " |
| "reg 0x%x bit 0x%x " |
| "intid = 0x%x\n", |
| __func__, i, bit, intid); |
| } |
| } |
| |
| /* Ack it */ |
| saa7164_writel(dev->int_ack + (i * 4), intstat[i]); |
| |
| } |
| } |
| out: |
| return IRQ_RETVAL(handled); |
| } |
| |
| void saa7164_getfirmwarestatus(struct saa7164_dev *dev) |
| { |
| struct saa7164_fw_status *s = &dev->fw_status; |
| |
| dev->fw_status.status = saa7164_readl(SAA_DEVICE_SYSINIT_STATUS); |
| dev->fw_status.mode = saa7164_readl(SAA_DEVICE_SYSINIT_MODE); |
| dev->fw_status.spec = saa7164_readl(SAA_DEVICE_SYSINIT_SPEC); |
| dev->fw_status.inst = saa7164_readl(SAA_DEVICE_SYSINIT_INST); |
| dev->fw_status.cpuload = saa7164_readl(SAA_DEVICE_SYSINIT_CPULOAD); |
| dev->fw_status.remainheap = |
| saa7164_readl(SAA_DEVICE_SYSINIT_REMAINHEAP); |
| |
| dprintk(1, "Firmware status:\n"); |
| dprintk(1, " .status = 0x%08x\n", s->status); |
| dprintk(1, " .mode = 0x%08x\n", s->mode); |
| dprintk(1, " .spec = 0x%08x\n", s->spec); |
| dprintk(1, " .inst = 0x%08x\n", s->inst); |
| dprintk(1, " .cpuload = 0x%08x\n", s->cpuload); |
| dprintk(1, " .remainheap = 0x%08x\n", s->remainheap); |
| } |
| |
| u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev) |
| { |
| u32 reg; |
| |
| reg = saa7164_readl(SAA_DEVICE_VERSION); |
| dprintk(1, "Device running firmware version %d.%d.%d.%d (0x%x)\n", |
| (reg & 0x0000fc00) >> 10, |
| (reg & 0x000003e0) >> 5, |
| (reg & 0x0000001f), |
| (reg & 0xffff0000) >> 16, |
| reg); |
| |
| return reg; |
| } |
| |
| /* TODO: Debugging func, remove */ |
| void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len) |
| { |
| int i; |
| |
| printk(KERN_INFO "--------------------> " |
| "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); |
| |
| for (i = 0; i < len; i += 16) |
| printk(KERN_INFO " [0x%08x] " |
| "%02x %02x %02x %02x %02x %02x %02x %02x " |
| "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, |
| *(buf+i+0), *(buf+i+1), *(buf+i+2), *(buf+i+3), |
| *(buf+i+4), *(buf+i+5), *(buf+i+6), *(buf+i+7), |
| *(buf+i+8), *(buf+i+9), *(buf+i+10), *(buf+i+11), |
| *(buf+i+12), *(buf+i+13), *(buf+i+14), *(buf+i+15)); |
| } |
| |
| /* TODO: Debugging func, remove */ |
| void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr) |
| { |
| int i; |
| |
| dprintk(1, "--------------------> " |
| "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); |
| |
| for (i = 0; i < 0x100; i += 16) |
| dprintk(1, "region0[0x%08x] = " |
| "%02x %02x %02x %02x %02x %02x %02x %02x" |
| " %02x %02x %02x %02x %02x %02x %02x %02x\n", i, |
| (u8)saa7164_readb(addr + i + 0), |
| (u8)saa7164_readb(addr + i + 1), |
| (u8)saa7164_readb(addr + i + 2), |
| (u8)saa7164_readb(addr + i + 3), |
| (u8)saa7164_readb(addr + i + 4), |
| (u8)saa7164_readb(addr + i + 5), |
| (u8)saa7164_readb(addr + i + 6), |
| (u8)saa7164_readb(addr + i + 7), |
| (u8)saa7164_readb(addr + i + 8), |
| (u8)saa7164_readb(addr + i + 9), |
| (u8)saa7164_readb(addr + i + 10), |
| (u8)saa7164_readb(addr + i + 11), |
| (u8)saa7164_readb(addr + i + 12), |
| (u8)saa7164_readb(addr + i + 13), |
| (u8)saa7164_readb(addr + i + 14), |
| (u8)saa7164_readb(addr + i + 15) |
| ); |
| } |
| |
| static void saa7164_dump_hwdesc(struct saa7164_dev *dev) |
| { |
| dprintk(1, "@0x%p hwdesc sizeof(tmComResHWDescr_t) = %d bytes\n", |
| &dev->hwdesc, (u32)sizeof(tmComResHWDescr_t)); |
| |
| dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength); |
| dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType); |
| dprintk(1, " .bDescriptorSubtype = 0x%x\n", |
| dev->hwdesc.bDescriptorSubtype); |
| |
| dprintk(1, " .bcdSpecVersion = 0x%x\n", dev->hwdesc.bcdSpecVersion); |
| dprintk(1, " .dwClockFrequency = 0x%x\n", dev->hwdesc.dwClockFrequency); |
| dprintk(1, " .dwClockUpdateRes = 0x%x\n", dev->hwdesc.dwClockUpdateRes); |
| dprintk(1, " .bCapabilities = 0x%x\n", dev->hwdesc.bCapabilities); |
| dprintk(1, " .dwDeviceRegistersLocation = 0x%x\n", |
| dev->hwdesc.dwDeviceRegistersLocation); |
| |
| dprintk(1, " .dwHostMemoryRegion = 0x%x\n", |
| dev->hwdesc.dwHostMemoryRegion); |
| |
| dprintk(1, " .dwHostMemoryRegionSize = 0x%x\n", |
| dev->hwdesc.dwHostMemoryRegionSize); |
| |
| dprintk(1, " .dwHostHibernatMemRegion = 0x%x\n", |
| dev->hwdesc.dwHostHibernatMemRegion); |
| |
| dprintk(1, " .dwHostHibernatMemRegionSize = 0x%x\n", |
| dev->hwdesc.dwHostHibernatMemRegionSize); |
| } |
| |
| static void saa7164_dump_intfdesc(struct saa7164_dev *dev) |
| { |
| dprintk(1, "@0x%p intfdesc " |
| "sizeof(tmComResInterfaceDescr_t) = %d bytes\n", |
| &dev->intfdesc, (u32)sizeof(tmComResInterfaceDescr_t)); |
| |
| dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength); |
| dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType); |
| dprintk(1, " .bDescriptorSubtype = 0x%x\n", |
| dev->intfdesc.bDescriptorSubtype); |
| |
| dprintk(1, " .bFlags = 0x%x\n", dev->intfdesc.bFlags); |
| dprintk(1, " .bInterfaceType = 0x%x\n", dev->intfdesc.bInterfaceType); |
| dprintk(1, " .bInterfaceId = 0x%x\n", dev->intfdesc.bInterfaceId); |
| dprintk(1, " .bBaseInterface = 0x%x\n", dev->intfdesc.bBaseInterface); |
| dprintk(1, " .bInterruptId = 0x%x\n", dev->intfdesc.bInterruptId); |
| dprintk(1, " .bDebugInterruptId = 0x%x\n", |
| dev->intfdesc.bDebugInterruptId); |
| |
| dprintk(1, " .BARLocation = 0x%x\n", dev->intfdesc.BARLocation); |
| } |
| |
| static void saa7164_dump_busdesc(struct saa7164_dev *dev) |
| { |
| dprintk(1, "@0x%p busdesc sizeof(tmComResBusDescr_t) = %d bytes\n", |
| &dev->busdesc, (u32)sizeof(tmComResBusDescr_t)); |
| |
| dprintk(1, " .CommandRing = 0x%016Lx\n", dev->busdesc.CommandRing); |
| dprintk(1, " .ResponseRing = 0x%016Lx\n", dev->busdesc.ResponseRing); |
| dprintk(1, " .CommandWrite = 0x%x\n", dev->busdesc.CommandWrite); |
| dprintk(1, " .CommandRead = 0x%x\n", dev->busdesc.CommandRead); |
| dprintk(1, " .ResponseWrite = 0x%x\n", dev->busdesc.ResponseWrite); |
| dprintk(1, " .ResponseRead = 0x%x\n", dev->busdesc.ResponseRead); |
| } |
| |
| /* Much of the hardware configuration and PCI registers are configured |
| * dynamically depending on firmware. We have to cache some initial |
| * structures then use these to locate other important structures |
| * from PCI space. |
| */ |
| static void saa7164_get_descriptors(struct saa7164_dev *dev) |
| { |
| memcpy(&dev->hwdesc, dev->bmmio, sizeof(tmComResHWDescr_t)); |
| memcpy(&dev->intfdesc, dev->bmmio + sizeof(tmComResHWDescr_t), |
| sizeof(tmComResInterfaceDescr_t)); |
| memcpy(&dev->busdesc, dev->bmmio + dev->intfdesc.BARLocation, |
| sizeof(tmComResBusDescr_t)); |
| |
| if (dev->hwdesc.bLength != sizeof(tmComResHWDescr_t)) { |
| printk(KERN_ERR "Structure tmComResHWDescr_t is mangled\n"); |
| printk(KERN_ERR "Need %x got %d\n", dev->hwdesc.bLength, |
| (u32)sizeof(tmComResHWDescr_t)); |
| } else |
| saa7164_dump_hwdesc(dev); |
| |
| if (dev->intfdesc.bLength != sizeof(tmComResInterfaceDescr_t)) { |
| printk(KERN_ERR "struct tmComResInterfaceDescr_t is mangled\n"); |
| printk(KERN_ERR "Need %x got %d\n", dev->intfdesc.bLength, |
| (u32)sizeof(tmComResInterfaceDescr_t)); |
| } else |
| saa7164_dump_intfdesc(dev); |
| |
| saa7164_dump_busdesc(dev); |
| } |
| |
| static int saa7164_pci_quirks(struct saa7164_dev *dev) |
| { |
| return 0; |
| } |
| |
| static int get_resources(struct saa7164_dev *dev) |
| { |
| if (request_mem_region(pci_resource_start(dev->pci, 0), |
| pci_resource_len(dev->pci, 0), dev->name)) { |
| |
| if (request_mem_region(pci_resource_start(dev->pci, 2), |
| pci_resource_len(dev->pci, 2), dev->name)) |
| return 0; |
| } |
| |
| printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n", |
| dev->name, |
| (u64)pci_resource_start(dev->pci, 0), |
| (u64)pci_resource_start(dev->pci, 2)); |
| |
| return -EBUSY; |
| } |
| |
| static int saa7164_dev_setup(struct saa7164_dev *dev) |
| { |
| int i; |
| |
| mutex_init(&dev->lock); |
| atomic_inc(&dev->refcount); |
| dev->nr = saa7164_devcount++; |
| |
| sprintf(dev->name, "saa7164[%d]", dev->nr); |
| |
| mutex_lock(&devlist); |
| list_add_tail(&dev->devlist, &saa7164_devlist); |
| mutex_unlock(&devlist); |
| |
| /* board config */ |
| dev->board = UNSET; |
| if (card[dev->nr] < saa7164_bcount) |
| dev->board = card[dev->nr]; |
| |
| for (i = 0; UNSET == dev->board && i < saa7164_idcount; i++) |
| if (dev->pci->subsystem_vendor == saa7164_subids[i].subvendor && |
| dev->pci->subsystem_device == |
| saa7164_subids[i].subdevice) |
| dev->board = saa7164_subids[i].card; |
| |
| if (UNSET == dev->board) { |
| dev->board = SAA7164_BOARD_UNKNOWN; |
| saa7164_card_list(dev); |
| } |
| |
| dev->pci_bus = dev->pci->bus->number; |
| dev->pci_slot = PCI_SLOT(dev->pci->devfn); |
| |
| /* I2C Defaults / setup */ |
| dev->i2c_bus[0].dev = dev; |
| dev->i2c_bus[0].nr = 0; |
| dev->i2c_bus[1].dev = dev; |
| dev->i2c_bus[1].nr = 1; |
| dev->i2c_bus[2].dev = dev; |
| dev->i2c_bus[2].nr = 2; |
| |
| /* Transport port A Defaults / setup */ |
| dev->ts1.dev = dev; |
| dev->ts1.nr = 0; |
| mutex_init(&dev->ts1.dvb.lock); |
| INIT_LIST_HEAD(&dev->ts1.dmaqueue.list); |
| INIT_LIST_HEAD(&dev->ts1.dummy_dmaqueue.list); |
| mutex_init(&dev->ts1.dmaqueue_lock); |
| mutex_init(&dev->ts1.dummy_dmaqueue_lock); |
| |
| /* Transport port B Defaults / setup */ |
| dev->ts2.dev = dev; |
| dev->ts2.nr = 1; |
| mutex_init(&dev->ts2.dvb.lock); |
| INIT_LIST_HEAD(&dev->ts2.dmaqueue.list); |
| INIT_LIST_HEAD(&dev->ts2.dummy_dmaqueue.list); |
| mutex_init(&dev->ts2.dmaqueue_lock); |
| mutex_init(&dev->ts2.dummy_dmaqueue_lock); |
| |
| if (get_resources(dev) < 0) { |
| printk(KERN_ERR "CORE %s No more PCIe resources for " |
| "subsystem: %04x:%04x\n", |
| dev->name, dev->pci->subsystem_vendor, |
| dev->pci->subsystem_device); |
| |
| saa7164_devcount--; |
| return -ENODEV; |
| } |
| |
| /* PCI/e allocations */ |
| dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), |
| pci_resource_len(dev->pci, 0)); |
| |
| dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2), |
| pci_resource_len(dev->pci, 2)); |
| |
| dev->bmmio = (u8 __iomem *)dev->lmmio; |
| dev->bmmio2 = (u8 __iomem *)dev->lmmio2; |
| |
| /* Inerrupt and ack register locations offset of bmmio */ |
| dev->int_status = 0x183000 + 0xf80; |
| dev->int_ack = 0x183000 + 0xf90; |
| |
| printk(KERN_INFO |
| "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", |
| dev->name, dev->pci->subsystem_vendor, |
| dev->pci->subsystem_device, saa7164_boards[dev->board].name, |
| dev->board, card[dev->nr] == dev->board ? |
| "insmod option" : "autodetected"); |
| |
| saa7164_pci_quirks(dev); |
| |
| return 0; |
| } |
| |
| static void saa7164_dev_unregister(struct saa7164_dev *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| |
| release_mem_region(pci_resource_start(dev->pci, 0), |
| pci_resource_len(dev->pci, 0)); |
| |
| release_mem_region(pci_resource_start(dev->pci, 2), |
| pci_resource_len(dev->pci, 2)); |
| |
| if (!atomic_dec_and_test(&dev->refcount)) |
| return; |
| |
| iounmap(dev->lmmio); |
| iounmap(dev->lmmio2); |
| |
| return; |
| } |
| |
| static int __devinit saa7164_initdev(struct pci_dev *pci_dev, |
| const struct pci_device_id *pci_id) |
| { |
| struct saa7164_dev *dev; |
| int err, i; |
| u32 version; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (NULL == dev) |
| return -ENOMEM; |
| |
| /* pci init */ |
| dev->pci = pci_dev; |
| if (pci_enable_device(pci_dev)) { |
| err = -EIO; |
| goto fail_free; |
| } |
| |
| if (saa7164_dev_setup(dev) < 0) { |
| err = -EINVAL; |
| goto fail_free; |
| } |
| |
| /* print pci info */ |
| pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev); |
| pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); |
| printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " |
| "latency: %d, mmio: 0x%llx\n", dev->name, |
| pci_name(pci_dev), dev->pci_rev, pci_dev->irq, |
| dev->pci_lat, |
| (unsigned long long)pci_resource_start(pci_dev, 0)); |
| |
| pci_set_master(pci_dev); |
| /* TODO */ |
| if (!pci_dma_supported(pci_dev, 0xffffffff)) { |
| printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); |
| err = -EIO; |
| goto fail_irq; |
| } |
| |
| err = request_irq(pci_dev->irq, saa7164_irq, |
| IRQF_SHARED | IRQF_DISABLED, dev->name, dev); |
| if (err < 0) { |
| printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name, |
| pci_dev->irq); |
| err = -EIO; |
| goto fail_irq; |
| } |
| |
| pci_set_drvdata(pci_dev, dev); |
| |
| /* Init the internal command list */ |
| for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { |
| dev->cmds[i].seqno = i; |
| dev->cmds[i].inuse = 0; |
| mutex_init(&dev->cmds[i].lock); |
| init_waitqueue_head(&dev->cmds[i].wait); |
| } |
| |
| /* We need a deferred interrupt handler for cmd handling */ |
| INIT_WORK(&dev->workcmd, saa7164_work_cmdhandler); |
| |
| /* Only load the firmware if we know the board */ |
| if (dev->board != SAA7164_BOARD_UNKNOWN) { |
| |
| err = saa7164_downloadfirmware(dev); |
| if (err < 0) { |
| printk(KERN_ERR |
| "Failed to boot firmware, no features " |
| "registered\n"); |
| goto fail_fw; |
| } |
| |
| saa7164_get_descriptors(dev); |
| saa7164_dumpregs(dev, 0); |
| saa7164_getcurrentfirmwareversion(dev); |
| saa7164_getfirmwarestatus(dev); |
| err = saa7164_bus_setup(dev); |
| if (err < 0) |
| printk(KERN_ERR |
| "Failed to setup the bus, will continue\n"); |
| saa7164_bus_dump(dev); |
| |
| /* Ping the running firmware via the command bus and get the |
| * firmware version, this checks the bus is running OK. |
| */ |
| version = 0; |
| if (saa7164_api_get_fw_version(dev, &version) == SAA_OK) |
| dprintk(1, "Bus is operating correctly using " |
| "version %d.%d.%d.%d (0x%x)\n", |
| (version & 0x0000fc00) >> 10, |
| (version & 0x000003e0) >> 5, |
| (version & 0x0000001f), |
| (version & 0xffff0000) >> 16, |
| version); |
| else |
| printk(KERN_ERR |
| "Failed to communicate with the firmware\n"); |
| |
| /* Bring up the I2C buses */ |
| saa7164_i2c_register(&dev->i2c_bus[0]); |
| saa7164_i2c_register(&dev->i2c_bus[1]); |
| saa7164_i2c_register(&dev->i2c_bus[2]); |
| saa7164_gpio_setup(dev); |
| saa7164_card_setup(dev); |
| |
| |
| /* Parse the dynamic device configuration, find various |
| * media endpoints (MPEG, WMV, PS, TS) and cache their |
| * configuration details into the driver, so we can |
| * reference them later during simething_register() func, |
| * interrupt handlers, deferred work handlers etc. |
| */ |
| saa7164_api_enum_subdevs(dev); |
| |
| /* Begin to create the video sub-systems and register funcs */ |
| if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) { |
| if (saa7164_dvb_register(&dev->ts1) < 0) { |
| printk(KERN_ERR "%s() Failed to register " |
| "dvb adapters on porta\n", |
| __func__); |
| } |
| } |
| |
| if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) { |
| if (saa7164_dvb_register(&dev->ts2) < 0) { |
| printk(KERN_ERR"%s() Failed to register " |
| "dvb adapters on portb\n", |
| __func__); |
| } |
| } |
| |
| } /* != BOARD_UNKNOWN */ |
| else |
| printk(KERN_ERR "%s() Unsupported board detected, " |
| "registering without firmware\n", __func__); |
| |
| dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug); |
| dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs); |
| |
| fail_fw: |
| return 0; |
| |
| fail_irq: |
| saa7164_dev_unregister(dev); |
| fail_free: |
| kfree(dev); |
| return err; |
| } |
| |
| static void saa7164_shutdown(struct saa7164_dev *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| } |
| |
| static void __devexit saa7164_finidev(struct pci_dev *pci_dev) |
| { |
| struct saa7164_dev *dev = pci_get_drvdata(pci_dev); |
| |
| saa7164_shutdown(dev); |
| |
| if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) |
| saa7164_dvb_unregister(&dev->ts1); |
| |
| if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) |
| saa7164_dvb_unregister(&dev->ts2); |
| |
| saa7164_i2c_unregister(&dev->i2c_bus[0]); |
| saa7164_i2c_unregister(&dev->i2c_bus[1]); |
| saa7164_i2c_unregister(&dev->i2c_bus[2]); |
| |
| pci_disable_device(pci_dev); |
| |
| /* unregister stuff */ |
| free_irq(pci_dev->irq, dev); |
| pci_set_drvdata(pci_dev, NULL); |
| |
| mutex_lock(&devlist); |
| list_del(&dev->devlist); |
| mutex_unlock(&devlist); |
| |
| saa7164_dev_unregister(dev); |
| kfree(dev); |
| } |
| |
| static struct pci_device_id saa7164_pci_tbl[] = { |
| { |
| /* SAA7164 */ |
| .vendor = 0x1131, |
| .device = 0x7164, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, { |
| /* --- end of list --- */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(pci, saa7164_pci_tbl); |
| |
| static struct pci_driver saa7164_pci_driver = { |
| .name = "saa7164", |
| .id_table = saa7164_pci_tbl, |
| .probe = saa7164_initdev, |
| .remove = __devexit_p(saa7164_finidev), |
| /* TODO */ |
| .suspend = NULL, |
| .resume = NULL, |
| }; |
| |
| static int __init saa7164_init(void) |
| { |
| printk(KERN_INFO "saa7164 driver loaded\n"); |
| return pci_register_driver(&saa7164_pci_driver); |
| } |
| |
| static void __exit saa7164_fini(void) |
| { |
| pci_unregister_driver(&saa7164_pci_driver); |
| } |
| |
| module_init(saa7164_init); |
| module_exit(saa7164_fini); |
| |