| /* |
| * pc87360.c - Part of lm_sensors, Linux kernel modules |
| * for hardware monitoring |
| * Copyright (C) 2004, 2007 Jean Delvare <khali@linux-fr.org> |
| * |
| * Copied from smsc47m1.c: |
| * Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Supports the following chips: |
| * |
| * Chip #vin #fan #pwm #temp devid |
| * PC87360 - 2 2 - 0xE1 |
| * PC87363 - 2 2 - 0xE8 |
| * PC87364 - 3 3 - 0xE4 |
| * PC87365 11 3 3 2 0xE5 |
| * PC87366 11 3 3 3-4 0xE9 |
| * |
| * This driver assumes that no more than one chip is present, and one of |
| * the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F). |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/platform_device.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/hwmon-vid.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <asm/io.h> |
| |
| static u8 devid; |
| static struct platform_device *pdev; |
| static unsigned short extra_isa[3]; |
| static u8 confreg[4]; |
| |
| static int init = 1; |
| module_param(init, int, 0); |
| MODULE_PARM_DESC(init, |
| "Chip initialization level:\n" |
| " 0: None\n" |
| "*1: Forcibly enable internal voltage and temperature channels, except in9\n" |
| " 2: Forcibly enable all voltage and temperature channels, except in9\n" |
| " 3: Forcibly enable all voltage and temperature channels, including in9"); |
| |
| /* |
| * Super-I/O registers and operations |
| */ |
| |
| #define DEV 0x07 /* Register: Logical device select */ |
| #define DEVID 0x20 /* Register: Device ID */ |
| #define ACT 0x30 /* Register: Device activation */ |
| #define BASE 0x60 /* Register: Base address */ |
| |
| #define FSCM 0x09 /* Logical device: fans */ |
| #define VLM 0x0d /* Logical device: voltages */ |
| #define TMS 0x0e /* Logical device: temperatures */ |
| static const u8 logdev[3] = { FSCM, VLM, TMS }; |
| |
| #define LD_FAN 0 |
| #define LD_IN 1 |
| #define LD_TEMP 2 |
| |
| static inline void superio_outb(int sioaddr, int reg, int val) |
| { |
| outb(reg, sioaddr); |
| outb(val, sioaddr+1); |
| } |
| |
| static inline int superio_inb(int sioaddr, int reg) |
| { |
| outb(reg, sioaddr); |
| return inb(sioaddr+1); |
| } |
| |
| static inline void superio_exit(int sioaddr) |
| { |
| outb(0x02, sioaddr); |
| outb(0x02, sioaddr+1); |
| } |
| |
| /* |
| * Logical devices |
| */ |
| |
| #define PC87360_EXTENT 0x10 |
| #define PC87365_REG_BANK 0x09 |
| #define NO_BANK 0xff |
| |
| /* |
| * Fan registers and conversions |
| */ |
| |
| /* nr has to be 0 or 1 (PC87360/87363) or 2 (PC87364/87365/87366) */ |
| #define PC87360_REG_PRESCALE(nr) (0x00 + 2 * (nr)) |
| #define PC87360_REG_PWM(nr) (0x01 + 2 * (nr)) |
| #define PC87360_REG_FAN_MIN(nr) (0x06 + 3 * (nr)) |
| #define PC87360_REG_FAN(nr) (0x07 + 3 * (nr)) |
| #define PC87360_REG_FAN_STATUS(nr) (0x08 + 3 * (nr)) |
| |
| #define FAN_FROM_REG(val,div) ((val) == 0 ? 0: \ |
| 480000 / ((val)*(div))) |
| #define FAN_TO_REG(val,div) ((val) <= 100 ? 0 : \ |
| 480000 / ((val)*(div))) |
| #define FAN_DIV_FROM_REG(val) (1 << ((val >> 5) & 0x03)) |
| #define FAN_STATUS_FROM_REG(val) ((val) & 0x07) |
| |
| #define FAN_CONFIG_MONITOR(val,nr) (((val) >> (2 + nr * 3)) & 1) |
| #define FAN_CONFIG_CONTROL(val,nr) (((val) >> (3 + nr * 3)) & 1) |
| #define FAN_CONFIG_INVERT(val,nr) (((val) >> (4 + nr * 3)) & 1) |
| |
| #define PWM_FROM_REG(val,inv) ((inv) ? 255 - (val) : (val)) |
| static inline u8 PWM_TO_REG(int val, int inv) |
| { |
| if (inv) |
| val = 255 - val; |
| if (val < 0) |
| return 0; |
| if (val > 255) |
| return 255; |
| return val; |
| } |
| |
| /* |
| * Voltage registers and conversions |
| */ |
| |
| #define PC87365_REG_IN_CONVRATE 0x07 |
| #define PC87365_REG_IN_CONFIG 0x08 |
| #define PC87365_REG_IN 0x0B |
| #define PC87365_REG_IN_MIN 0x0D |
| #define PC87365_REG_IN_MAX 0x0C |
| #define PC87365_REG_IN_STATUS 0x0A |
| #define PC87365_REG_IN_ALARMS1 0x00 |
| #define PC87365_REG_IN_ALARMS2 0x01 |
| #define PC87365_REG_VID 0x06 |
| |
| #define IN_FROM_REG(val,ref) (((val) * (ref) + 128) / 256) |
| #define IN_TO_REG(val,ref) ((val) < 0 ? 0 : \ |
| (val)*256 >= (ref)*255 ? 255: \ |
| ((val) * 256 + (ref)/2) / (ref)) |
| |
| /* |
| * Temperature registers and conversions |
| */ |
| |
| #define PC87365_REG_TEMP_CONFIG 0x08 |
| #define PC87365_REG_TEMP 0x0B |
| #define PC87365_REG_TEMP_MIN 0x0D |
| #define PC87365_REG_TEMP_MAX 0x0C |
| #define PC87365_REG_TEMP_CRIT 0x0E |
| #define PC87365_REG_TEMP_STATUS 0x0A |
| #define PC87365_REG_TEMP_ALARMS 0x00 |
| |
| #define TEMP_FROM_REG(val) ((val) * 1000) |
| #define TEMP_TO_REG(val) ((val) < -55000 ? -55 : \ |
| (val) > 127000 ? 127 : \ |
| (val) < 0 ? ((val) - 500) / 1000 : \ |
| ((val) + 500) / 1000) |
| |
| /* |
| * Device data |
| */ |
| |
| struct pc87360_data { |
| const char *name; |
| struct device *hwmon_dev; |
| struct mutex lock; |
| struct mutex update_lock; |
| char valid; /* !=0 if following fields are valid */ |
| unsigned long last_updated; /* In jiffies */ |
| |
| int address[3]; |
| |
| u8 fannr, innr, tempnr; |
| |
| u8 fan[3]; /* Register value */ |
| u8 fan_min[3]; /* Register value */ |
| u8 fan_status[3]; /* Register value */ |
| u8 pwm[3]; /* Register value */ |
| u16 fan_conf; /* Configuration register values, combined */ |
| |
| u16 in_vref; /* 1 mV/bit */ |
| u8 in[14]; /* Register value */ |
| u8 in_min[14]; /* Register value */ |
| u8 in_max[14]; /* Register value */ |
| u8 in_crit[3]; /* Register value */ |
| u8 in_status[14]; /* Register value */ |
| u16 in_alarms; /* Register values, combined, masked */ |
| u8 vid_conf; /* Configuration register value */ |
| u8 vrm; |
| u8 vid; /* Register value */ |
| |
| s8 temp[3]; /* Register value */ |
| s8 temp_min[3]; /* Register value */ |
| s8 temp_max[3]; /* Register value */ |
| s8 temp_crit[3]; /* Register value */ |
| u8 temp_status[3]; /* Register value */ |
| u8 temp_alarms; /* Register value, masked */ |
| }; |
| |
| /* |
| * Functions declaration |
| */ |
| |
| static int pc87360_probe(struct platform_device *pdev); |
| static int __devexit pc87360_remove(struct platform_device *pdev); |
| |
| static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, |
| u8 reg); |
| static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, |
| u8 reg, u8 value); |
| static void pc87360_init_device(struct platform_device *pdev, |
| int use_thermistors); |
| static struct pc87360_data *pc87360_update_device(struct device *dev); |
| |
| /* |
| * Driver data |
| */ |
| |
| static struct platform_driver pc87360_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "pc87360", |
| }, |
| .probe = pc87360_probe, |
| .remove = __devexit_p(pc87360_remove), |
| }; |
| |
| /* |
| * Sysfs stuff |
| */ |
| |
| static ssize_t show_fan_input(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[attr->index], |
| FAN_DIV_FROM_REG(data->fan_status[attr->index]))); |
| } |
| static ssize_t show_fan_min(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[attr->index], |
| FAN_DIV_FROM_REG(data->fan_status[attr->index]))); |
| } |
| static ssize_t show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", |
| FAN_DIV_FROM_REG(data->fan_status[attr->index])); |
| } |
| static ssize_t show_fan_status(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", |
| FAN_STATUS_FROM_REG(data->fan_status[attr->index])); |
| } |
| static ssize_t set_fan_min(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long fan_min = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[attr->index])); |
| |
| /* If it wouldn't fit, change clock divisor */ |
| while (fan_min > 255 |
| && (data->fan_status[attr->index] & 0x60) != 0x60) { |
| fan_min >>= 1; |
| data->fan[attr->index] >>= 1; |
| data->fan_status[attr->index] += 0x20; |
| } |
| data->fan_min[attr->index] = fan_min > 255 ? 255 : fan_min; |
| pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(attr->index), |
| data->fan_min[attr->index]); |
| |
| /* Write new divider, preserve alarm bits */ |
| pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(attr->index), |
| data->fan_status[attr->index] & 0xF9); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static struct sensor_device_attribute fan_input[] = { |
| SENSOR_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0), |
| SENSOR_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1), |
| SENSOR_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2), |
| }; |
| static struct sensor_device_attribute fan_status[] = { |
| SENSOR_ATTR(fan1_status, S_IRUGO, show_fan_status, NULL, 0), |
| SENSOR_ATTR(fan2_status, S_IRUGO, show_fan_status, NULL, 1), |
| SENSOR_ATTR(fan3_status, S_IRUGO, show_fan_status, NULL, 2), |
| }; |
| static struct sensor_device_attribute fan_div[] = { |
| SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0), |
| SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1), |
| SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2), |
| }; |
| static struct sensor_device_attribute fan_min[] = { |
| SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 0), |
| SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 1), |
| SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 2), |
| }; |
| |
| #define FAN_UNIT_ATTRS(X) \ |
| &fan_input[X].dev_attr.attr, \ |
| &fan_status[X].dev_attr.attr, \ |
| &fan_div[X].dev_attr.attr, \ |
| &fan_min[X].dev_attr.attr |
| |
| static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", |
| PWM_FROM_REG(data->pwm[attr->index], |
| FAN_CONFIG_INVERT(data->fan_conf, |
| attr->index))); |
| } |
| static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->pwm[attr->index] = PWM_TO_REG(val, |
| FAN_CONFIG_INVERT(data->fan_conf, attr->index)); |
| pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(attr->index), |
| data->pwm[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static struct sensor_device_attribute pwm[] = { |
| SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0), |
| SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1), |
| SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2), |
| }; |
| |
| static struct attribute * pc8736x_fan_attr_array[] = { |
| FAN_UNIT_ATTRS(0), |
| FAN_UNIT_ATTRS(1), |
| FAN_UNIT_ATTRS(2), |
| &pwm[0].dev_attr.attr, |
| &pwm[1].dev_attr.attr, |
| &pwm[2].dev_attr.attr, |
| NULL |
| }; |
| static const struct attribute_group pc8736x_fan_group = { |
| .attrs = pc8736x_fan_attr_array, |
| }; |
| |
| static ssize_t show_in_input(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index], |
| data->in_vref)); |
| } |
| static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index], |
| data->in_vref)); |
| } |
| static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index], |
| data->in_vref)); |
| } |
| static ssize_t show_in_status(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", data->in_status[attr->index]); |
| } |
| static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->in_min[attr->index] = IN_TO_REG(val, data->in_vref); |
| pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MIN, |
| data->in_min[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->in_max[attr->index] = IN_TO_REG(val, |
| data->in_vref); |
| pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MAX, |
| data->in_max[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static struct sensor_device_attribute in_input[] = { |
| SENSOR_ATTR(in0_input, S_IRUGO, show_in_input, NULL, 0), |
| SENSOR_ATTR(in1_input, S_IRUGO, show_in_input, NULL, 1), |
| SENSOR_ATTR(in2_input, S_IRUGO, show_in_input, NULL, 2), |
| SENSOR_ATTR(in3_input, S_IRUGO, show_in_input, NULL, 3), |
| SENSOR_ATTR(in4_input, S_IRUGO, show_in_input, NULL, 4), |
| SENSOR_ATTR(in5_input, S_IRUGO, show_in_input, NULL, 5), |
| SENSOR_ATTR(in6_input, S_IRUGO, show_in_input, NULL, 6), |
| SENSOR_ATTR(in7_input, S_IRUGO, show_in_input, NULL, 7), |
| SENSOR_ATTR(in8_input, S_IRUGO, show_in_input, NULL, 8), |
| SENSOR_ATTR(in9_input, S_IRUGO, show_in_input, NULL, 9), |
| SENSOR_ATTR(in10_input, S_IRUGO, show_in_input, NULL, 10), |
| }; |
| static struct sensor_device_attribute in_status[] = { |
| SENSOR_ATTR(in0_status, S_IRUGO, show_in_status, NULL, 0), |
| SENSOR_ATTR(in1_status, S_IRUGO, show_in_status, NULL, 1), |
| SENSOR_ATTR(in2_status, S_IRUGO, show_in_status, NULL, 2), |
| SENSOR_ATTR(in3_status, S_IRUGO, show_in_status, NULL, 3), |
| SENSOR_ATTR(in4_status, S_IRUGO, show_in_status, NULL, 4), |
| SENSOR_ATTR(in5_status, S_IRUGO, show_in_status, NULL, 5), |
| SENSOR_ATTR(in6_status, S_IRUGO, show_in_status, NULL, 6), |
| SENSOR_ATTR(in7_status, S_IRUGO, show_in_status, NULL, 7), |
| SENSOR_ATTR(in8_status, S_IRUGO, show_in_status, NULL, 8), |
| SENSOR_ATTR(in9_status, S_IRUGO, show_in_status, NULL, 9), |
| SENSOR_ATTR(in10_status, S_IRUGO, show_in_status, NULL, 10), |
| }; |
| static struct sensor_device_attribute in_min[] = { |
| SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 0), |
| SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 1), |
| SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 2), |
| SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 3), |
| SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 4), |
| SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 5), |
| SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 6), |
| SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 7), |
| SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 8), |
| SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 9), |
| SENSOR_ATTR(in10_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 10), |
| }; |
| static struct sensor_device_attribute in_max[] = { |
| SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 0), |
| SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 1), |
| SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 2), |
| SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 3), |
| SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 4), |
| SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 5), |
| SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 6), |
| SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 7), |
| SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 8), |
| SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 9), |
| SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10), |
| }; |
| |
| #define VIN_UNIT_ATTRS(X) \ |
| &in_input[X].dev_attr.attr, \ |
| &in_status[X].dev_attr.attr, \ |
| &in_min[X].dev_attr.attr, \ |
| &in_max[X].dev_attr.attr |
| |
| static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); |
| } |
| static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); |
| |
| static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", data->vrm); |
| } |
| static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| data->vrm = simple_strtoul(buf, NULL, 10); |
| return count; |
| } |
| static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); |
| |
| static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", data->in_alarms); |
| } |
| static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL); |
| |
| static struct attribute *pc8736x_vin_attr_array[] = { |
| VIN_UNIT_ATTRS(0), |
| VIN_UNIT_ATTRS(1), |
| VIN_UNIT_ATTRS(2), |
| VIN_UNIT_ATTRS(3), |
| VIN_UNIT_ATTRS(4), |
| VIN_UNIT_ATTRS(5), |
| VIN_UNIT_ATTRS(6), |
| VIN_UNIT_ATTRS(7), |
| VIN_UNIT_ATTRS(8), |
| VIN_UNIT_ATTRS(9), |
| VIN_UNIT_ATTRS(10), |
| &dev_attr_cpu0_vid.attr, |
| &dev_attr_vrm.attr, |
| &dev_attr_alarms_in.attr, |
| NULL |
| }; |
| static const struct attribute_group pc8736x_vin_group = { |
| .attrs = pc8736x_vin_attr_array, |
| }; |
| |
| static ssize_t show_therm_input(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", IN_FROM_REG(data->in[attr->index], |
| data->in_vref)); |
| } |
| static ssize_t show_therm_min(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[attr->index], |
| data->in_vref)); |
| } |
| static ssize_t show_therm_max(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[attr->index], |
| data->in_vref)); |
| } |
| static ssize_t show_therm_crit(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[attr->index-11], |
| data->in_vref)); |
| } |
| static ssize_t show_therm_status(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", data->in_status[attr->index]); |
| } |
| static ssize_t set_therm_min(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->in_min[attr->index] = IN_TO_REG(val, data->in_vref); |
| pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MIN, |
| data->in_min[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| static ssize_t set_therm_max(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->in_max[attr->index] = IN_TO_REG(val, data->in_vref); |
| pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MAX, |
| data->in_max[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->in_crit[attr->index-11] = IN_TO_REG(val, data->in_vref); |
| pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_CRIT, |
| data->in_crit[attr->index-11]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| /* the +11 term below reflects the fact that VLM units 11,12,13 are |
| used in the chip to measure voltage across the thermistors |
| */ |
| static struct sensor_device_attribute therm_input[] = { |
| SENSOR_ATTR(temp4_input, S_IRUGO, show_therm_input, NULL, 0+11), |
| SENSOR_ATTR(temp5_input, S_IRUGO, show_therm_input, NULL, 1+11), |
| SENSOR_ATTR(temp6_input, S_IRUGO, show_therm_input, NULL, 2+11), |
| }; |
| static struct sensor_device_attribute therm_status[] = { |
| SENSOR_ATTR(temp4_status, S_IRUGO, show_therm_status, NULL, 0+11), |
| SENSOR_ATTR(temp5_status, S_IRUGO, show_therm_status, NULL, 1+11), |
| SENSOR_ATTR(temp6_status, S_IRUGO, show_therm_status, NULL, 2+11), |
| }; |
| static struct sensor_device_attribute therm_min[] = { |
| SENSOR_ATTR(temp4_min, S_IRUGO | S_IWUSR, |
| show_therm_min, set_therm_min, 0+11), |
| SENSOR_ATTR(temp5_min, S_IRUGO | S_IWUSR, |
| show_therm_min, set_therm_min, 1+11), |
| SENSOR_ATTR(temp6_min, S_IRUGO | S_IWUSR, |
| show_therm_min, set_therm_min, 2+11), |
| }; |
| static struct sensor_device_attribute therm_max[] = { |
| SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR, |
| show_therm_max, set_therm_max, 0+11), |
| SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR, |
| show_therm_max, set_therm_max, 1+11), |
| SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, |
| show_therm_max, set_therm_max, 2+11), |
| }; |
| static struct sensor_device_attribute therm_crit[] = { |
| SENSOR_ATTR(temp4_crit, S_IRUGO | S_IWUSR, |
| show_therm_crit, set_therm_crit, 0+11), |
| SENSOR_ATTR(temp5_crit, S_IRUGO | S_IWUSR, |
| show_therm_crit, set_therm_crit, 1+11), |
| SENSOR_ATTR(temp6_crit, S_IRUGO | S_IWUSR, |
| show_therm_crit, set_therm_crit, 2+11), |
| }; |
| |
| #define THERM_UNIT_ATTRS(X) \ |
| &therm_input[X].dev_attr.attr, \ |
| &therm_status[X].dev_attr.attr, \ |
| &therm_min[X].dev_attr.attr, \ |
| &therm_max[X].dev_attr.attr, \ |
| &therm_crit[X].dev_attr.attr |
| |
| static struct attribute * pc8736x_therm_attr_array[] = { |
| THERM_UNIT_ATTRS(0), |
| THERM_UNIT_ATTRS(1), |
| THERM_UNIT_ATTRS(2), |
| NULL |
| }; |
| static const struct attribute_group pc8736x_therm_group = { |
| .attrs = pc8736x_therm_attr_array, |
| }; |
| |
| static ssize_t show_temp_input(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); |
| } |
| static ssize_t show_temp_min(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[attr->index])); |
| } |
| static ssize_t show_temp_max(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[attr->index])); |
| } |
| static ssize_t show_temp_crit(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[attr->index])); |
| } |
| static ssize_t show_temp_status(struct device *dev, struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%d\n", data->temp_status[attr->index]); |
| } |
| static ssize_t set_temp_min(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_min[attr->index] = TEMP_TO_REG(val); |
| pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MIN, |
| data->temp_min[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_max[attr->index] = TEMP_TO_REG(val); |
| pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MAX, |
| data->temp_max[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_crit[attr->index] = TEMP_TO_REG(val); |
| pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_CRIT, |
| data->temp_crit[attr->index]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static struct sensor_device_attribute temp_input[] = { |
| SENSOR_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0), |
| SENSOR_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1), |
| SENSOR_ATTR(temp3_input, S_IRUGO, show_temp_input, NULL, 2), |
| }; |
| static struct sensor_device_attribute temp_status[] = { |
| SENSOR_ATTR(temp1_status, S_IRUGO, show_temp_status, NULL, 0), |
| SENSOR_ATTR(temp2_status, S_IRUGO, show_temp_status, NULL, 1), |
| SENSOR_ATTR(temp3_status, S_IRUGO, show_temp_status, NULL, 2), |
| }; |
| static struct sensor_device_attribute temp_min[] = { |
| SENSOR_ATTR(temp1_min, S_IRUGO | S_IWUSR, |
| show_temp_min, set_temp_min, 0), |
| SENSOR_ATTR(temp2_min, S_IRUGO | S_IWUSR, |
| show_temp_min, set_temp_min, 1), |
| SENSOR_ATTR(temp3_min, S_IRUGO | S_IWUSR, |
| show_temp_min, set_temp_min, 2), |
| }; |
| static struct sensor_device_attribute temp_max[] = { |
| SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, |
| show_temp_max, set_temp_max, 0), |
| SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, |
| show_temp_max, set_temp_max, 1), |
| SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, |
| show_temp_max, set_temp_max, 2), |
| }; |
| static struct sensor_device_attribute temp_crit[] = { |
| SENSOR_ATTR(temp1_crit, S_IRUGO | S_IWUSR, |
| show_temp_crit, set_temp_crit, 0), |
| SENSOR_ATTR(temp2_crit, S_IRUGO | S_IWUSR, |
| show_temp_crit, set_temp_crit, 1), |
| SENSOR_ATTR(temp3_crit, S_IRUGO | S_IWUSR, |
| show_temp_crit, set_temp_crit, 2), |
| }; |
| |
| static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pc87360_data *data = pc87360_update_device(dev); |
| return sprintf(buf, "%u\n", data->temp_alarms); |
| } |
| static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL); |
| |
| #define TEMP_UNIT_ATTRS(X) \ |
| &temp_input[X].dev_attr.attr, \ |
| &temp_status[X].dev_attr.attr, \ |
| &temp_min[X].dev_attr.attr, \ |
| &temp_max[X].dev_attr.attr, \ |
| &temp_crit[X].dev_attr.attr |
| |
| static struct attribute * pc8736x_temp_attr_array[] = { |
| TEMP_UNIT_ATTRS(0), |
| TEMP_UNIT_ATTRS(1), |
| TEMP_UNIT_ATTRS(2), |
| /* include the few miscellaneous atts here */ |
| &dev_attr_alarms_temp.attr, |
| NULL |
| }; |
| static const struct attribute_group pc8736x_temp_group = { |
| .attrs = pc8736x_temp_attr_array, |
| }; |
| |
| static ssize_t show_name(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| return sprintf(buf, "%s\n", data->name); |
| } |
| static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); |
| |
| /* |
| * Device detection, registration and update |
| */ |
| |
| static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses) |
| { |
| u16 val; |
| int i; |
| int nrdev; /* logical device count */ |
| |
| /* No superio_enter */ |
| |
| /* Identify device */ |
| val = superio_inb(sioaddr, DEVID); |
| switch (val) { |
| case 0xE1: /* PC87360 */ |
| case 0xE8: /* PC87363 */ |
| case 0xE4: /* PC87364 */ |
| nrdev = 1; |
| break; |
| case 0xE5: /* PC87365 */ |
| case 0xE9: /* PC87366 */ |
| nrdev = 3; |
| break; |
| default: |
| superio_exit(sioaddr); |
| return -ENODEV; |
| } |
| /* Remember the device id */ |
| *devid = val; |
| |
| for (i = 0; i < nrdev; i++) { |
| /* select logical device */ |
| superio_outb(sioaddr, DEV, logdev[i]); |
| |
| val = superio_inb(sioaddr, ACT); |
| if (!(val & 0x01)) { |
| printk(KERN_INFO "pc87360: Device 0x%02x not " |
| "activated\n", logdev[i]); |
| continue; |
| } |
| |
| val = (superio_inb(sioaddr, BASE) << 8) |
| | superio_inb(sioaddr, BASE + 1); |
| if (!val) { |
| printk(KERN_INFO "pc87360: Base address not set for " |
| "device 0x%02x\n", logdev[i]); |
| continue; |
| } |
| |
| addresses[i] = val; |
| |
| if (i==0) { /* Fans */ |
| confreg[0] = superio_inb(sioaddr, 0xF0); |
| confreg[1] = superio_inb(sioaddr, 0xF1); |
| |
| #ifdef DEBUG |
| printk(KERN_DEBUG "pc87360: Fan 1: mon=%d " |
| "ctrl=%d inv=%d\n", (confreg[0]>>2)&1, |
| (confreg[0]>>3)&1, (confreg[0]>>4)&1); |
| printk(KERN_DEBUG "pc87360: Fan 2: mon=%d " |
| "ctrl=%d inv=%d\n", (confreg[0]>>5)&1, |
| (confreg[0]>>6)&1, (confreg[0]>>7)&1); |
| printk(KERN_DEBUG "pc87360: Fan 3: mon=%d " |
| "ctrl=%d inv=%d\n", confreg[1]&1, |
| (confreg[1]>>1)&1, (confreg[1]>>2)&1); |
| #endif |
| } else if (i==1) { /* Voltages */ |
| /* Are we using thermistors? */ |
| if (*devid == 0xE9) { /* PC87366 */ |
| /* These registers are not logical-device |
| specific, just that we won't need them if |
| we don't use the VLM device */ |
| confreg[2] = superio_inb(sioaddr, 0x2B); |
| confreg[3] = superio_inb(sioaddr, 0x25); |
| |
| if (confreg[2] & 0x40) { |
| printk(KERN_INFO "pc87360: Using " |
| "thermistors for temperature " |
| "monitoring\n"); |
| } |
| if (confreg[3] & 0xE0) { |
| printk(KERN_INFO "pc87360: VID " |
| "inputs routed (mode %u)\n", |
| confreg[3] >> 5); |
| } |
| } |
| } |
| } |
| |
| superio_exit(sioaddr); |
| return 0; |
| } |
| |
| static int __devinit pc87360_probe(struct platform_device *pdev) |
| { |
| int i; |
| struct pc87360_data *data; |
| int err = 0; |
| const char *name = "pc87360"; |
| int use_thermistors = 0; |
| struct device *dev = &pdev->dev; |
| |
| if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL))) |
| return -ENOMEM; |
| |
| data->fannr = 2; |
| data->innr = 0; |
| data->tempnr = 0; |
| |
| switch (devid) { |
| case 0xe8: |
| name = "pc87363"; |
| break; |
| case 0xe4: |
| name = "pc87364"; |
| data->fannr = 3; |
| break; |
| case 0xe5: |
| name = "pc87365"; |
| data->fannr = extra_isa[0] ? 3 : 0; |
| data->innr = extra_isa[1] ? 11 : 0; |
| data->tempnr = extra_isa[2] ? 2 : 0; |
| break; |
| case 0xe9: |
| name = "pc87366"; |
| data->fannr = extra_isa[0] ? 3 : 0; |
| data->innr = extra_isa[1] ? 14 : 0; |
| data->tempnr = extra_isa[2] ? 3 : 0; |
| break; |
| } |
| |
| data->name = name; |
| data->valid = 0; |
| mutex_init(&data->lock); |
| mutex_init(&data->update_lock); |
| platform_set_drvdata(pdev, data); |
| |
| for (i = 0; i < 3; i++) { |
| if (((data->address[i] = extra_isa[i])) |
| && !request_region(extra_isa[i], PC87360_EXTENT, |
| pc87360_driver.driver.name)) { |
| dev_err(dev, "Region 0x%x-0x%x already " |
| "in use!\n", extra_isa[i], |
| extra_isa[i]+PC87360_EXTENT-1); |
| for (i--; i >= 0; i--) |
| release_region(extra_isa[i], PC87360_EXTENT); |
| err = -EBUSY; |
| goto ERROR1; |
| } |
| } |
| |
| /* Retrieve the fans configuration from Super-I/O space */ |
| if (data->fannr) |
| data->fan_conf = confreg[0] | (confreg[1] << 8); |
| |
| /* Use the correct reference voltage |
| Unless both the VLM and the TMS logical devices agree to |
| use an external Vref, the internal one is used. */ |
| if (data->innr) { |
| i = pc87360_read_value(data, LD_IN, NO_BANK, |
| PC87365_REG_IN_CONFIG); |
| if (data->tempnr) { |
| i &= pc87360_read_value(data, LD_TEMP, NO_BANK, |
| PC87365_REG_TEMP_CONFIG); |
| } |
| data->in_vref = (i&0x02) ? 3025 : 2966; |
| dev_dbg(dev, "Using %s reference voltage\n", |
| (i&0x02) ? "external" : "internal"); |
| |
| data->vid_conf = confreg[3]; |
| data->vrm = vid_which_vrm(); |
| } |
| |
| /* Fan clock dividers may be needed before any data is read */ |
| for (i = 0; i < data->fannr; i++) { |
| if (FAN_CONFIG_MONITOR(data->fan_conf, i)) |
| data->fan_status[i] = pc87360_read_value(data, |
| LD_FAN, NO_BANK, |
| PC87360_REG_FAN_STATUS(i)); |
| } |
| |
| if (init > 0) { |
| if (devid == 0xe9 && data->address[1]) /* PC87366 */ |
| use_thermistors = confreg[2] & 0x40; |
| |
| pc87360_init_device(pdev, use_thermistors); |
| } |
| |
| /* Register all-or-nothing sysfs groups */ |
| |
| if (data->innr && |
| (err = sysfs_create_group(&dev->kobj, |
| &pc8736x_vin_group))) |
| goto ERROR3; |
| |
| if (data->innr == 14 && |
| (err = sysfs_create_group(&dev->kobj, |
| &pc8736x_therm_group))) |
| goto ERROR3; |
| |
| /* create device attr-files for varying sysfs groups */ |
| |
| if (data->tempnr) { |
| for (i = 0; i < data->tempnr; i++) { |
| if ((err = device_create_file(dev, |
| &temp_input[i].dev_attr)) |
| || (err = device_create_file(dev, |
| &temp_min[i].dev_attr)) |
| || (err = device_create_file(dev, |
| &temp_max[i].dev_attr)) |
| || (err = device_create_file(dev, |
| &temp_crit[i].dev_attr)) |
| || (err = device_create_file(dev, |
| &temp_status[i].dev_attr))) |
| goto ERROR3; |
| } |
| if ((err = device_create_file(dev, &dev_attr_alarms_temp))) |
| goto ERROR3; |
| } |
| |
| for (i = 0; i < data->fannr; i++) { |
| if (FAN_CONFIG_MONITOR(data->fan_conf, i) |
| && ((err = device_create_file(dev, |
| &fan_input[i].dev_attr)) |
| || (err = device_create_file(dev, |
| &fan_min[i].dev_attr)) |
| || (err = device_create_file(dev, |
| &fan_div[i].dev_attr)) |
| || (err = device_create_file(dev, |
| &fan_status[i].dev_attr)))) |
| goto ERROR3; |
| |
| if (FAN_CONFIG_CONTROL(data->fan_conf, i) |
| && (err = device_create_file(dev, &pwm[i].dev_attr))) |
| goto ERROR3; |
| } |
| |
| if ((err = device_create_file(dev, &dev_attr_name))) |
| goto ERROR3; |
| |
| data->hwmon_dev = hwmon_device_register(dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| goto ERROR3; |
| } |
| return 0; |
| |
| ERROR3: |
| device_remove_file(dev, &dev_attr_name); |
| /* can still remove groups whose members were added individually */ |
| sysfs_remove_group(&dev->kobj, &pc8736x_temp_group); |
| sysfs_remove_group(&dev->kobj, &pc8736x_fan_group); |
| sysfs_remove_group(&dev->kobj, &pc8736x_therm_group); |
| sysfs_remove_group(&dev->kobj, &pc8736x_vin_group); |
| for (i = 0; i < 3; i++) { |
| if (data->address[i]) { |
| release_region(data->address[i], PC87360_EXTENT); |
| } |
| } |
| ERROR1: |
| kfree(data); |
| return err; |
| } |
| |
| static int __devexit pc87360_remove(struct platform_device *pdev) |
| { |
| struct pc87360_data *data = platform_get_drvdata(pdev); |
| int i; |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| |
| device_remove_file(&pdev->dev, &dev_attr_name); |
| sysfs_remove_group(&pdev->dev.kobj, &pc8736x_temp_group); |
| sysfs_remove_group(&pdev->dev.kobj, &pc8736x_fan_group); |
| sysfs_remove_group(&pdev->dev.kobj, &pc8736x_therm_group); |
| sysfs_remove_group(&pdev->dev.kobj, &pc8736x_vin_group); |
| |
| for (i = 0; i < 3; i++) { |
| if (data->address[i]) { |
| release_region(data->address[i], PC87360_EXTENT); |
| } |
| } |
| kfree(data); |
| |
| return 0; |
| } |
| |
| /* ldi is the logical device index |
| bank is for voltages and temperatures only */ |
| static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, |
| u8 reg) |
| { |
| int res; |
| |
| mutex_lock(&(data->lock)); |
| if (bank != NO_BANK) |
| outb_p(bank, data->address[ldi] + PC87365_REG_BANK); |
| res = inb_p(data->address[ldi] + reg); |
| mutex_unlock(&(data->lock)); |
| |
| return res; |
| } |
| |
| static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, |
| u8 reg, u8 value) |
| { |
| mutex_lock(&(data->lock)); |
| if (bank != NO_BANK) |
| outb_p(bank, data->address[ldi] + PC87365_REG_BANK); |
| outb_p(value, data->address[ldi] + reg); |
| mutex_unlock(&(data->lock)); |
| } |
| |
| static void pc87360_init_device(struct platform_device *pdev, |
| int use_thermistors) |
| { |
| struct pc87360_data *data = platform_get_drvdata(pdev); |
| int i, nr; |
| const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 }; |
| const u8 init_temp[3] = { 2, 2, 1 }; |
| u8 reg; |
| |
| if (init >= 2 && data->innr) { |
| reg = pc87360_read_value(data, LD_IN, NO_BANK, |
| PC87365_REG_IN_CONVRATE); |
| dev_info(&pdev->dev, "VLM conversion set to " |
| "1s period, 160us delay\n"); |
| pc87360_write_value(data, LD_IN, NO_BANK, |
| PC87365_REG_IN_CONVRATE, |
| (reg & 0xC0) | 0x11); |
| } |
| |
| nr = data->innr < 11 ? data->innr : 11; |
| for (i = 0; i < nr; i++) { |
| if (init >= init_in[i]) { |
| /* Forcibly enable voltage channel */ |
| reg = pc87360_read_value(data, LD_IN, i, |
| PC87365_REG_IN_STATUS); |
| if (!(reg & 0x01)) { |
| dev_dbg(&pdev->dev, "Forcibly " |
| "enabling in%d\n", i); |
| pc87360_write_value(data, LD_IN, i, |
| PC87365_REG_IN_STATUS, |
| (reg & 0x68) | 0x87); |
| } |
| } |
| } |
| |
| /* We can't blindly trust the Super-I/O space configuration bit, |
| most BIOS won't set it properly */ |
| for (i = 11; i < data->innr; i++) { |
| reg = pc87360_read_value(data, LD_IN, i, |
| PC87365_REG_TEMP_STATUS); |
| use_thermistors = use_thermistors || (reg & 0x01); |
| } |
| |
| i = use_thermistors ? 2 : 0; |
| for (; i < data->tempnr; i++) { |
| if (init >= init_temp[i]) { |
| /* Forcibly enable temperature channel */ |
| reg = pc87360_read_value(data, LD_TEMP, i, |
| PC87365_REG_TEMP_STATUS); |
| if (!(reg & 0x01)) { |
| dev_dbg(&pdev->dev, "Forcibly " |
| "enabling temp%d\n", i+1); |
| pc87360_write_value(data, LD_TEMP, i, |
| PC87365_REG_TEMP_STATUS, |
| 0xCF); |
| } |
| } |
| } |
| |
| if (use_thermistors) { |
| for (i = 11; i < data->innr; i++) { |
| if (init >= init_in[i]) { |
| /* The pin may already be used by thermal |
| diodes */ |
| reg = pc87360_read_value(data, LD_TEMP, |
| (i-11)/2, PC87365_REG_TEMP_STATUS); |
| if (reg & 0x01) { |
| dev_dbg(&pdev->dev, "Skipping " |
| "temp%d, pin already in use " |
| "by temp%d\n", i-7, (i-11)/2); |
| continue; |
| } |
| |
| /* Forcibly enable thermistor channel */ |
| reg = pc87360_read_value(data, LD_IN, i, |
| PC87365_REG_IN_STATUS); |
| if (!(reg & 0x01)) { |
| dev_dbg(&pdev->dev, "Forcibly " |
| "enabling temp%d\n", i-7); |
| pc87360_write_value(data, LD_IN, i, |
| PC87365_REG_TEMP_STATUS, |
| (reg & 0x60) | 0x8F); |
| } |
| } |
| } |
| } |
| |
| if (data->innr) { |
| reg = pc87360_read_value(data, LD_IN, NO_BANK, |
| PC87365_REG_IN_CONFIG); |
| if (reg & 0x01) { |
| dev_dbg(&pdev->dev, "Forcibly " |
| "enabling monitoring (VLM)\n"); |
| pc87360_write_value(data, LD_IN, NO_BANK, |
| PC87365_REG_IN_CONFIG, |
| reg & 0xFE); |
| } |
| } |
| |
| if (data->tempnr) { |
| reg = pc87360_read_value(data, LD_TEMP, NO_BANK, |
| PC87365_REG_TEMP_CONFIG); |
| if (reg & 0x01) { |
| dev_dbg(&pdev->dev, "Forcibly enabling " |
| "monitoring (TMS)\n"); |
| pc87360_write_value(data, LD_TEMP, NO_BANK, |
| PC87365_REG_TEMP_CONFIG, |
| reg & 0xFE); |
| } |
| |
| if (init >= 2) { |
| /* Chip config as documented by National Semi. */ |
| pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08); |
| /* We voluntarily omit the bank here, in case the |
| sequence itself matters. It shouldn't be a problem, |
| since nobody else is supposed to access the |
| device at that point. */ |
| pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04); |
| pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35); |
| pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05); |
| pc87360_write_value(data, LD_TEMP, NO_BANK, 0xE, 0x05); |
| } |
| } |
| } |
| |
| static void pc87360_autodiv(struct device *dev, int nr) |
| { |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| u8 old_min = data->fan_min[nr]; |
| |
| /* Increase clock divider if needed and possible */ |
| if ((data->fan_status[nr] & 0x04) /* overflow flag */ |
| || (data->fan[nr] >= 224)) { /* next to overflow */ |
| if ((data->fan_status[nr] & 0x60) != 0x60) { |
| data->fan_status[nr] += 0x20; |
| data->fan_min[nr] >>= 1; |
| data->fan[nr] >>= 1; |
| dev_dbg(dev, "Increasing " |
| "clock divider to %d for fan %d\n", |
| FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1); |
| } |
| } else { |
| /* Decrease clock divider if possible */ |
| while (!(data->fan_min[nr] & 0x80) /* min "nails" divider */ |
| && data->fan[nr] < 85 /* bad accuracy */ |
| && (data->fan_status[nr] & 0x60) != 0x00) { |
| data->fan_status[nr] -= 0x20; |
| data->fan_min[nr] <<= 1; |
| data->fan[nr] <<= 1; |
| dev_dbg(dev, "Decreasing " |
| "clock divider to %d for fan %d\n", |
| FAN_DIV_FROM_REG(data->fan_status[nr]), |
| nr+1); |
| } |
| } |
| |
| /* Write new fan min if it changed */ |
| if (old_min != data->fan_min[nr]) { |
| pc87360_write_value(data, LD_FAN, NO_BANK, |
| PC87360_REG_FAN_MIN(nr), |
| data->fan_min[nr]); |
| } |
| } |
| |
| static struct pc87360_data *pc87360_update_device(struct device *dev) |
| { |
| struct pc87360_data *data = dev_get_drvdata(dev); |
| u8 i; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { |
| dev_dbg(dev, "Data update\n"); |
| |
| /* Fans */ |
| for (i = 0; i < data->fannr; i++) { |
| if (FAN_CONFIG_MONITOR(data->fan_conf, i)) { |
| data->fan_status[i] = |
| pc87360_read_value(data, LD_FAN, |
| NO_BANK, PC87360_REG_FAN_STATUS(i)); |
| data->fan[i] = pc87360_read_value(data, LD_FAN, |
| NO_BANK, PC87360_REG_FAN(i)); |
| data->fan_min[i] = pc87360_read_value(data, |
| LD_FAN, NO_BANK, |
| PC87360_REG_FAN_MIN(i)); |
| /* Change clock divider if needed */ |
| pc87360_autodiv(dev, i); |
| /* Clear bits and write new divider */ |
| pc87360_write_value(data, LD_FAN, NO_BANK, |
| PC87360_REG_FAN_STATUS(i), |
| data->fan_status[i]); |
| } |
| if (FAN_CONFIG_CONTROL(data->fan_conf, i)) |
| data->pwm[i] = pc87360_read_value(data, LD_FAN, |
| NO_BANK, PC87360_REG_PWM(i)); |
| } |
| |
| /* Voltages */ |
| for (i = 0; i < data->innr; i++) { |
| data->in_status[i] = pc87360_read_value(data, LD_IN, i, |
| PC87365_REG_IN_STATUS); |
| /* Clear bits */ |
| pc87360_write_value(data, LD_IN, i, |
| PC87365_REG_IN_STATUS, |
| data->in_status[i]); |
| if ((data->in_status[i] & 0x81) == 0x81) { |
| data->in[i] = pc87360_read_value(data, LD_IN, |
| i, PC87365_REG_IN); |
| } |
| if (data->in_status[i] & 0x01) { |
| data->in_min[i] = pc87360_read_value(data, |
| LD_IN, i, |
| PC87365_REG_IN_MIN); |
| data->in_max[i] = pc87360_read_value(data, |
| LD_IN, i, |
| PC87365_REG_IN_MAX); |
| if (i >= 11) |
| data->in_crit[i-11] = |
| pc87360_read_value(data, LD_IN, |
| i, PC87365_REG_TEMP_CRIT); |
| } |
| } |
| if (data->innr) { |
| data->in_alarms = pc87360_read_value(data, LD_IN, |
| NO_BANK, PC87365_REG_IN_ALARMS1) |
| | ((pc87360_read_value(data, LD_IN, |
| NO_BANK, PC87365_REG_IN_ALARMS2) |
| & 0x07) << 8); |
| data->vid = (data->vid_conf & 0xE0) ? |
| pc87360_read_value(data, LD_IN, |
| NO_BANK, PC87365_REG_VID) : 0x1F; |
| } |
| |
| /* Temperatures */ |
| for (i = 0; i < data->tempnr; i++) { |
| data->temp_status[i] = pc87360_read_value(data, |
| LD_TEMP, i, |
| PC87365_REG_TEMP_STATUS); |
| /* Clear bits */ |
| pc87360_write_value(data, LD_TEMP, i, |
| PC87365_REG_TEMP_STATUS, |
| data->temp_status[i]); |
| if ((data->temp_status[i] & 0x81) == 0x81) { |
| data->temp[i] = pc87360_read_value(data, |
| LD_TEMP, i, |
| PC87365_REG_TEMP); |
| } |
| if (data->temp_status[i] & 0x01) { |
| data->temp_min[i] = pc87360_read_value(data, |
| LD_TEMP, i, |
| PC87365_REG_TEMP_MIN); |
| data->temp_max[i] = pc87360_read_value(data, |
| LD_TEMP, i, |
| PC87365_REG_TEMP_MAX); |
| data->temp_crit[i] = pc87360_read_value(data, |
| LD_TEMP, i, |
| PC87365_REG_TEMP_CRIT); |
| } |
| } |
| if (data->tempnr) { |
| data->temp_alarms = pc87360_read_value(data, LD_TEMP, |
| NO_BANK, PC87365_REG_TEMP_ALARMS) |
| & 0x3F; |
| } |
| |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| static int __init pc87360_device_add(unsigned short address) |
| { |
| struct resource res = { |
| .name = "pc87360", |
| .flags = IORESOURCE_IO, |
| }; |
| int err, i; |
| |
| pdev = platform_device_alloc("pc87360", address); |
| if (!pdev) { |
| err = -ENOMEM; |
| printk(KERN_ERR "pc87360: Device allocation failed\n"); |
| goto exit; |
| } |
| |
| for (i = 0; i < 3; i++) { |
| if (!extra_isa[i]) |
| continue; |
| res.start = extra_isa[i]; |
| res.end = extra_isa[i] + PC87360_EXTENT - 1; |
| err = platform_device_add_resources(pdev, &res, 1); |
| if (err) { |
| printk(KERN_ERR "pc87360: Device resource[%d] " |
| "addition failed (%d)\n", i, err); |
| goto exit_device_put; |
| } |
| } |
| |
| err = platform_device_add(pdev); |
| if (err) { |
| printk(KERN_ERR "pc87360: Device addition failed (%d)\n", |
| err); |
| goto exit_device_put; |
| } |
| |
| return 0; |
| |
| exit_device_put: |
| platform_device_put(pdev); |
| exit: |
| return err; |
| } |
| |
| static int __init pc87360_init(void) |
| { |
| int err, i; |
| unsigned short address = 0; |
| |
| if (pc87360_find(0x2e, &devid, extra_isa) |
| && pc87360_find(0x4e, &devid, extra_isa)) { |
| printk(KERN_WARNING "pc87360: PC8736x not detected, " |
| "module not inserted.\n"); |
| return -ENODEV; |
| } |
| |
| /* Arbitrarily pick one of the addresses */ |
| for (i = 0; i < 3; i++) { |
| if (extra_isa[i] != 0x0000) { |
| address = extra_isa[i]; |
| break; |
| } |
| } |
| |
| if (address == 0x0000) { |
| printk(KERN_WARNING "pc87360: No active logical device, " |
| "module not inserted.\n"); |
| return -ENODEV; |
| } |
| |
| err = platform_driver_register(&pc87360_driver); |
| if (err) |
| goto exit; |
| |
| /* Sets global pdev as a side effect */ |
| err = pc87360_device_add(address); |
| if (err) |
| goto exit_driver; |
| |
| return 0; |
| |
| exit_driver: |
| platform_driver_unregister(&pc87360_driver); |
| exit: |
| return err; |
| } |
| |
| static void __exit pc87360_exit(void) |
| { |
| platform_device_unregister(pdev); |
| platform_driver_unregister(&pc87360_driver); |
| } |
| |
| |
| MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); |
| MODULE_DESCRIPTION("PC8736x hardware monitor"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(pc87360_init); |
| module_exit(pc87360_exit); |