blob: 50decf8e1b90a573b11dc864c7b30612a5d5c5a0 [file] [log] [blame]
Device-Tree bindings for drm hdmi driver
Required properties:
- compatible: value should be one among the following:
1) "samsung,exynos5-hdmi" <DEPRECATED>
2) "samsung,exynos4210-hdmi"
3) "samsung,exynos4212-hdmi"
- reg: physical base address of the hdmi and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
- hpd-gpio: following information about the hotplug gpio pin.
a) phandle of the gpio controller node.
b) pin number within the gpio controller.
c) optional flags and pull up/down.
- clocks: list of clock IDs from SoC clock driver.
a) hdmi: Gate of HDMI IP bus clock.
b) sclk_hdmi: Gate of HDMI special clock.
c) sclk_pixel: Pixel special clock, one of the two possible inputs of
HDMI clock mux.
d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
HDMI clock mux.
e) mout_hdmi: It is required by the driver to switch between the 2
parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
after configuration, parent is set to sclk_hdmiphy else
sclk_pixel.
- clock-names: aliases as per driver requirements for above clock IDs:
"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
Example:
hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x100000>;
interrupts = <0 95 0>;
hpd-gpio = <&gpx3 7 1>;
};