arch/arm/plat-omap/include/plat/usb.h - maze/linux - Git at Google

 // include/asm-arm/mach-omap/usb.h

 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H

 #include <linux/usb/musb.h>
 #include <plat/board.h>

 #define OMAP3_HS_USB_PORTS	3

 enum usbhs_omap_port_mode {
 	OMAP_USBHS_PORT_MODE_UNUSED,
 	OMAP_EHCI_PORT_MODE_PHY,
 	OMAP_EHCI_PORT_MODE_TLL,
 	OMAP_EHCI_PORT_MODE_HSIC,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };

 struct usbhs_omap_board_data {
 	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];

 	/* have to be valid if phy_reset is true and portx is in phy mode */
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];

 	/* Set this to true for ES2.x silicon */
 	unsigned			es2_compatibility:1;

 	unsigned			phy_reset:1;

 	/*
 	 * Regulators for USB PHYs.
 	 * Each PHY can have a separate regulator.
 	 */
 	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 };

 struct ehci_hcd_omap_platform_data {
 	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
 	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 	unsigned			phy_reset:1;
 };

 struct ohci_hcd_omap_platform_data {
 	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			es2_compatibility:1;
 };

 struct usbhs_omap_platform_data {
 	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];

 	struct ehci_hcd_omap_platform_data	*ehci_data;
 	struct ohci_hcd_omap_platform_data	*ohci_data;
 };
 /*-------------------------------------------------------------------------*/

 #define OMAP1_OTG_BASE			0xfffb0400
 #define OMAP1_UDC_BASE			0xfffb4000
 #define OMAP1_OHCI_BASE			0xfffba000

 #define OMAP2_OHCI_BASE			0x4805e000
 #define OMAP2_UDC_BASE			0x4805e200
 #define OMAP2_OTG_BASE			0x4805e300

 #ifdef CONFIG_ARCH_OMAP1

 #define OTG_BASE			OMAP1_OTG_BASE
 #define UDC_BASE			OMAP1_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP1_OHCI_BASE

 #else

 #define OTG_BASE			OMAP2_OTG_BASE
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE

 struct omap_musb_board_data {
 	u8	interface_type;
 	u8	mode;
 	u16	power;
 	unsigned extvbus:1;
 	void	(*set_phy_power)(u8 on);
 	void	(*clear_irq)(void);
 	void	(*set_mode)(u8 mode);
 	void	(*reset)(void);
 };

 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};

 extern void usb_musb_init(struct omap_musb_board_data *board_data);

 extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata);

 extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata);

 extern int omap_usbhs_enable(struct device *dev);
 extern void omap_usbhs_disable(struct device *dev);

 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
 #endif

 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number
  */
 #ifdef	CONFIG_USB_GADGET_OMAP
 #define	is_usb0_device(config)	1
 #else
 #define	is_usb0_device(config)	0
 #endif

 void omap_otg_init(struct omap_usb_config *config);

 #if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)
 {
 }
 #endif

 #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
 void omap2_usbfs_init(struct omap_usb_config *pdata);
 #else
 static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
 {
 }
 #endif

 /*-------------------------------------------------------------------------*/

 /*
  * OTG and transceiver registers, for OMAPs starting with ARM926
  */
 #define OTG_REV				(OTG_BASE + 0x00)
 #define OTG_SYSCON_1			(OTG_BASE + 0x04)
 #	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
 #	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
 #	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
 #	define	 OTG_IDLE_EN		(1 << 15)
 #	define	 HST_IDLE_EN		(1 << 14)
 #	define	 DEV_IDLE_EN		(1 << 13)
 #	define	 OTG_RESET_DONE		(1 << 2)
 #	define	 OTG_SOFT_RESET		(1 << 1)
 #define OTG_SYSCON_2			(OTG_BASE + 0x08)
 #	define	 OTG_EN			(1 << 31)
 #	define	 USBX_SYNCHRO		(1 << 30)
 #	define	 OTG_MST16		(1 << 29)
 #	define	 SRP_GPDATA		(1 << 28)
 #	define	 SRP_GPDVBUS		(1 << 27)
 #	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
 #	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
 #	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
 #	define	 SRP_DPW		(1 << 14)
 #	define	 SRP_DATA		(1 << 13)
 #	define	 SRP_VBUS		(1 << 12)
 #	define	 OTG_PADEN		(1 << 10)
 #	define	 HMC_PADEN		(1 << 9)
 #	define	 UHOST_EN		(1 << 8)
 #	define	 HMC_TLLSPEED		(1 << 7)
 #	define	 HMC_TLLATTACH		(1 << 6)
 #	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
 #define OTG_CTRL			(OTG_BASE + 0x0c)
 #	define	 OTG_USB2_EN		(1 << 29)
 #	define	 OTG_USB2_DP		(1 << 28)
 #	define	 OTG_USB2_DM		(1 << 27)
 #	define	 OTG_USB1_EN		(1 << 26)
 #	define	 OTG_USB1_DP		(1 << 25)
 #	define	 OTG_USB1_DM		(1 << 24)
 #	define	 OTG_USB0_EN		(1 << 23)
 #	define	 OTG_USB0_DP		(1 << 22)
 #	define	 OTG_USB0_DM		(1 << 21)
 #	define	 OTG_ASESSVLD		(1 << 20)
 #	define	 OTG_BSESSEND		(1 << 19)
 #	define	 OTG_BSESSVLD		(1 << 18)
 #	define	 OTG_VBUSVLD		(1 << 17)
 #	define	 OTG_ID			(1 << 16)
 #	define	 OTG_DRIVER_SEL		(1 << 15)
 #	define	 OTG_A_SETB_HNPEN	(1 << 12)
 #	define	 OTG_A_BUSREQ		(1 << 11)
 #	define	 OTG_B_HNPEN		(1 << 9)
 #	define	 OTG_B_BUSREQ		(1 << 8)
 #	define	 OTG_BUSDROP		(1 << 7)
 #	define	 OTG_PULLDOWN		(1 << 5)
 #	define	 OTG_PULLUP		(1 << 4)
 #	define	 OTG_DRV_VBUS		(1 << 3)
 #	define	 OTG_PD_VBUS		(1 << 2)
 #	define	 OTG_PU_VBUS		(1 << 1)
 #	define	 OTG_PU_ID		(1 << 0)
 #define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
 #	define	 DRIVER_SWITCH		(1 << 15)
 #	define	 A_VBUS_ERR		(1 << 13)
 #	define	 A_REQ_TMROUT		(1 << 12)
 #	define	 A_SRP_DETECT		(1 << 11)
 #	define	 B_HNP_FAIL		(1 << 10)
 #	define	 B_SRP_TMROUT		(1 << 9)
 #	define	 B_SRP_DONE		(1 << 8)
 #	define	 B_SRP_STARTED		(1 << 7)
 #	define	 OPRT_CHG		(1 << 0)
 #define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
 	// same bits as in IRQ_EN
 #define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
 #	define	 OTGVPD			(1 << 14)
 #	define	 OTGVPU			(1 << 13)
 #	define	 OTGPUID		(1 << 12)
 #	define	 USB2VDR		(1 << 10)
 #	define	 USB2PDEN		(1 << 9)
 #	define	 USB2PUEN		(1 << 8)
 #	define	 USB1VDR		(1 << 6)
 #	define	 USB1PDEN		(1 << 5)
 #	define	 USB1PUEN		(1 << 4)
 #	define	 USB0VDR		(1 << 2)
 #	define	 USB0PDEN		(1 << 1)
 #	define	 USB0PUEN		(1 << 0)
 #define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
 #define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */

 /*-------------------------------------------------------------------------*/

 /* OMAP1 */
 #define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
 #	define	CONF_USB2_UNI_R		(1 << 8)
 #	define	CONF_USB1_UNI_R		(1 << 7)
 #	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
 #	define	CONF_USB0_ISOLATE_R	(1 << 3)
 #	define	CONF_USB_PWRDN_DM_R	(1 << 2)
 #	define	CONF_USB_PWRDN_DP_R	(1 << 1)

 /* OMAP2 */
 #	define	USB_UNIDIR			0x0
 #	define	USB_UNIDIR_TLL			0x1
 #	define	USB_BIDIR			0x2
 #	define	USB_BIDIR_TLL			0x3
 #	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
 #	define	USBT2TLL5PI		(1 << 17)
 #	define	USB0PUENACTLOI		(1 << 16)
 #	define	USBSTANDBYCTRL		(1 << 15)
 /* AM35x */
 /* USB 2.0 PHY Control */
 #define CONF2_PHY_GPIOMODE	(1 << 23)
 #define CONF2_OTGMODE		(3 << 14)
 #define CONF2_NO_OVERRIDE	(0 << 14)
 #define CONF2_FORCE_HOST	(1 << 14)
 #define CONF2_FORCE_DEVICE	(2 << 14)
 #define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
 #define CONF2_SESENDEN		(1 << 13)
 #define CONF2_VBDTCTEN		(1 << 12)
 #define CONF2_REFFREQ_24MHZ	(2 << 8)
 #define CONF2_REFFREQ_26MHZ	(7 << 8)
 #define CONF2_REFFREQ_13MHZ	(6 << 8)
 #define CONF2_REFFREQ		(0xf << 8)
 #define CONF2_PHYCLKGD		(1 << 7)
 #define CONF2_VBUSSENSE		(1 << 6)
 #define CONF2_PHY_PLLON		(1 << 5)
 #define CONF2_RESET		(1 << 4)
 #define CONF2_PHYPWRDN		(1 << 3)
 #define CONF2_OTGPWRDN		(1 << 2)
 #define CONF2_DATPOL		(1 << 1)

 #if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
 u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
 u32 omap1_usb1_init(unsigned nwires);
 u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
 #else
 static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
 {
 	return 0;
 }
 static inline u32 omap1_usb1_init(unsigned nwires)
 {
 	return 0;

 }
 static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
 {
 	return 0;
 }
 #endif

 #endif	/* __ASM_ARCH_OMAP_USB_H */
	// include/asm-arm/mach-omap/usb.h

	#ifndef __ASM_ARCH_OMAP_USB_H
	#define __ASM_ARCH_OMAP_USB_H

	#include <linux/usb/musb.h>
	#include <plat/board.h>

	#define OMAP3_HS_USB_PORTS 3

	enum usbhs_omap_port_mode {
	OMAP_USBHS_PORT_MODE_UNUSED,
	OMAP_EHCI_PORT_MODE_PHY,
	OMAP_EHCI_PORT_MODE_TLL,
	OMAP_EHCI_PORT_MODE_HSIC,
	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
	};

	struct usbhs_omap_board_data {
	enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];

	/* have to be valid if phy_reset is true and portx is in phy mode */
	int reset_gpio_port[OMAP3_HS_USB_PORTS];

	/* Set this to true for ES2.x silicon */
	unsigned es2_compatibility:1;

	unsigned phy_reset:1;

	/*
	* Regulators for USB PHYs.
	* Each PHY can have a separate regulator.
	*/
	struct regulator *regulator[OMAP3_HS_USB_PORTS];
	};

	struct ehci_hcd_omap_platform_data {
	enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
	int reset_gpio_port[OMAP3_HS_USB_PORTS];
	struct regulator *regulator[OMAP3_HS_USB_PORTS];
	unsigned phy_reset:1;
	};

	struct ohci_hcd_omap_platform_data {
	enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
	unsigned es2_compatibility:1;
	};

	struct usbhs_omap_platform_data {
	enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];

	struct ehci_hcd_omap_platform_data *ehci_data;
	struct ohci_hcd_omap_platform_data *ohci_data;
	};
	/-------------------------------------------------------------------------/

	#define OMAP1_OTG_BASE 0xfffb0400
	#define OMAP1_UDC_BASE 0xfffb4000
	#define OMAP1_OHCI_BASE 0xfffba000

	#define OMAP2_OHCI_BASE 0x4805e000
	#define OMAP2_UDC_BASE 0x4805e200
	#define OMAP2_OTG_BASE 0x4805e300

	#ifdef CONFIG_ARCH_OMAP1

	#define OTG_BASE OMAP1_OTG_BASE
	#define UDC_BASE OMAP1_UDC_BASE
	#define OMAP_OHCI_BASE OMAP1_OHCI_BASE

	#else

	#define OTG_BASE OMAP2_OTG_BASE
	#define UDC_BASE OMAP2_UDC_BASE
	#define OMAP_OHCI_BASE OMAP2_OHCI_BASE

	struct omap_musb_board_data {
	u8 interface_type;
	u8 mode;
	u16 power;
	unsigned extvbus:1;
	void (*set_phy_power)(u8 on);
	void (*clear_irq)(void);
	void (*set_mode)(u8 mode);
	void (*reset)(void);
	};

	enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};

	extern void usb_musb_init(struct omap_musb_board_data *board_data);

	extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata);

	extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata);

	extern int omap_usbhs_enable(struct device *dev);
	extern void omap_usbhs_disable(struct device *dev);

	extern int omap4430_phy_power(struct device *dev, int ID, int on);
	extern int omap4430_phy_set_clk(struct device *dev, int on);
	extern int omap4430_phy_init(struct device *dev);
	extern int omap4430_phy_exit(struct device *dev);
	extern int omap4430_phy_suspend(struct device *dev, int suspend);
	#endif

	/*
	* FIXME correct answer depends on hmc_mode,
	* as does (on omap1) any nonzero value for config->otg port number
	*/
	#ifdef CONFIG_USB_GADGET_OMAP
	#define is_usb0_device(config) 1
	#else
	#define is_usb0_device(config) 0
	#endif

	void omap_otg_init(struct omap_usb_config *config);

	#if defined(CONFIG_USB) \|\| defined(CONFIG_USB_MODULE)
	void omap1_usb_init(struct omap_usb_config *pdata);
	#else
	static inline void omap1_usb_init(struct omap_usb_config *pdata)
	{
	}
	#endif

	#if defined(CONFIG_ARCH_OMAP_OTG) \|\| defined(CONFIG_ARCH_OMAP_OTG_MODULE)
	void omap2_usbfs_init(struct omap_usb_config *pdata);
	#else
	static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
	{
	}
	#endif

	/-------------------------------------------------------------------------/

	/*
	* OTG and transceiver registers, for OMAPs starting with ARM926
	*/
	#define OTG_REV (OTG_BASE + 0x00)
	#define OTG_SYSCON_1 (OTG_BASE + 0x04)
	# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
	# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
	# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
	# define OTG_IDLE_EN (1 << 15)
	# define HST_IDLE_EN (1 << 14)
	# define DEV_IDLE_EN (1 << 13)
	# define OTG_RESET_DONE (1 << 2)
	# define OTG_SOFT_RESET (1 << 1)
	#define OTG_SYSCON_2 (OTG_BASE + 0x08)
	# define OTG_EN (1 << 31)
	# define USBX_SYNCHRO (1 << 30)
	# define OTG_MST16 (1 << 29)
	# define SRP_GPDATA (1 << 28)
	# define SRP_GPDVBUS (1 << 27)
	# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
	# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
	# define B_ASE_BRST(w) (((w)>>16)&0x07)
	# define SRP_DPW (1 << 14)
	# define SRP_DATA (1 << 13)
	# define SRP_VBUS (1 << 12)
	# define OTG_PADEN (1 << 10)
	# define HMC_PADEN (1 << 9)
	# define UHOST_EN (1 << 8)
	# define HMC_TLLSPEED (1 << 7)
	# define HMC_TLLATTACH (1 << 6)
	# define OTG_HMC(w) (((w)>>0)&0x3f)
	#define OTG_CTRL (OTG_BASE + 0x0c)
	# define OTG_USB2_EN (1 << 29)
	# define OTG_USB2_DP (1 << 28)
	# define OTG_USB2_DM (1 << 27)
	# define OTG_USB1_EN (1 << 26)
	# define OTG_USB1_DP (1 << 25)
	# define OTG_USB1_DM (1 << 24)
	# define OTG_USB0_EN (1 << 23)
	# define OTG_USB0_DP (1 << 22)
	# define OTG_USB0_DM (1 << 21)
	# define OTG_ASESSVLD (1 << 20)
	# define OTG_BSESSEND (1 << 19)
	# define OTG_BSESSVLD (1 << 18)
	# define OTG_VBUSVLD (1 << 17)
	# define OTG_ID (1 << 16)
	# define OTG_DRIVER_SEL (1 << 15)
	# define OTG_A_SETB_HNPEN (1 << 12)
	# define OTG_A_BUSREQ (1 << 11)
	# define OTG_B_HNPEN (1 << 9)
	# define OTG_B_BUSREQ (1 << 8)
	# define OTG_BUSDROP (1 << 7)
	# define OTG_PULLDOWN (1 << 5)
	# define OTG_PULLUP (1 << 4)
	# define OTG_DRV_VBUS (1 << 3)
	# define OTG_PD_VBUS (1 << 2)
	# define OTG_PU_VBUS (1 << 1)
	# define OTG_PU_ID (1 << 0)
	#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
	# define DRIVER_SWITCH (1 << 15)
	# define A_VBUS_ERR (1 << 13)
	# define A_REQ_TMROUT (1 << 12)
	# define A_SRP_DETECT (1 << 11)
	# define B_HNP_FAIL (1 << 10)
	# define B_SRP_TMROUT (1 << 9)
	# define B_SRP_DONE (1 << 8)
	# define B_SRP_STARTED (1 << 7)
	# define OPRT_CHG (1 << 0)
	#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
	// same bits as in IRQ_EN
	#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
	# define OTGVPD (1 << 14)
	# define OTGVPU (1 << 13)
	# define OTGPUID (1 << 12)
	# define USB2VDR (1 << 10)
	# define USB2PDEN (1 << 9)
	# define USB2PUEN (1 << 8)
	# define USB1VDR (1 << 6)
	# define USB1PDEN (1 << 5)
	# define USB1PUEN (1 << 4)
	# define USB0VDR (1 << 2)
	# define USB0PDEN (1 << 1)
	# define USB0PUEN (1 << 0)
	#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
	#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */

	/-------------------------------------------------------------------------/

	/* OMAP1 */
	#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
	# define CONF_USB2_UNI_R (1 << 8)
	# define CONF_USB1_UNI_R (1 << 7)
	# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
	# define CONF_USB0_ISOLATE_R (1 << 3)
	# define CONF_USB_PWRDN_DM_R (1 << 2)
	# define CONF_USB_PWRDN_DP_R (1 << 1)

	/* OMAP2 */
	# define USB_UNIDIR 0x0
	# define USB_UNIDIR_TLL 0x1
	# define USB_BIDIR 0x2
	# define USB_BIDIR_TLL 0x3
	# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2)))
	# define USBT2TLL5PI (1 << 17)
	# define USB0PUENACTLOI (1 << 16)
	# define USBSTANDBYCTRL (1 << 15)
	/* AM35x */
	/* USB 2.0 PHY Control */
	#define CONF2_PHY_GPIOMODE (1 << 23)
	#define CONF2_OTGMODE (3 << 14)
	#define CONF2_NO_OVERRIDE (0 << 14)
	#define CONF2_FORCE_HOST (1 << 14)
	#define CONF2_FORCE_DEVICE (2 << 14)
	#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
	#define CONF2_SESENDEN (1 << 13)
	#define CONF2_VBDTCTEN (1 << 12)
	#define CONF2_REFFREQ_24MHZ (2 << 8)
	#define CONF2_REFFREQ_26MHZ (7 << 8)
	#define CONF2_REFFREQ_13MHZ (6 << 8)
	#define CONF2_REFFREQ (0xf << 8)
	#define CONF2_PHYCLKGD (1 << 7)
	#define CONF2_VBUSSENSE (1 << 6)
	#define CONF2_PHY_PLLON (1 << 5)
	#define CONF2_RESET (1 << 4)
	#define CONF2_PHYPWRDN (1 << 3)
	#define CONF2_OTGPWRDN (1 << 2)
	#define CONF2_DATPOL (1 << 1)

	#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
	u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
	u32 omap1_usb1_init(unsigned nwires);
	u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
	#else
	static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
	{
	return 0;
	}
	static inline u32 omap1_usb1_init(unsigned nwires)
	{
	return 0;

	}
	static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
	{
	return 0;
	}
	#endif

	#endif /* __ASM_ARCH_OMAP_USB_H */