| /* |
| * File: sound/soc/blackfin/bf5xx-ad73311.c |
| * Author: Cliff Cai <Cliff.Cai@analog.com> |
| * |
| * Created: Thur Sep 25 2008 |
| * Description: Board driver for ad73311 sound chip |
| * |
| * Modified: |
| * Copyright 2008 Analog Devices Inc. |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see the file COPYING, or write |
| * to the Free Software Foundation, Inc., |
| * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/pcm_params.h> |
| |
| #include <asm/blackfin.h> |
| #include <asm/cacheflush.h> |
| #include <asm/irq.h> |
| #include <asm/dma.h> |
| #include <asm/portmux.h> |
| |
| #include "../codecs/ad73311.h" |
| #include "bf5xx-sport.h" |
| #include "bf5xx-i2s-pcm.h" |
| #include "bf5xx-i2s.h" |
| |
| #if CONFIG_SND_BF5XX_SPORT_NUM == 0 |
| #define bfin_write_SPORT_TCR1 bfin_write_SPORT0_TCR1 |
| #define bfin_read_SPORT_TCR1 bfin_read_SPORT0_TCR1 |
| #define bfin_write_SPORT_TCR2 bfin_write_SPORT0_TCR2 |
| #define bfin_write_SPORT_TX16 bfin_write_SPORT0_TX16 |
| #define bfin_read_SPORT_STAT bfin_read_SPORT0_STAT |
| #else |
| #define bfin_write_SPORT_TCR1 bfin_write_SPORT1_TCR1 |
| #define bfin_read_SPORT_TCR1 bfin_read_SPORT1_TCR1 |
| #define bfin_write_SPORT_TCR2 bfin_write_SPORT1_TCR2 |
| #define bfin_write_SPORT_TX16 bfin_write_SPORT1_TX16 |
| #define bfin_read_SPORT_STAT bfin_read_SPORT1_STAT |
| #endif |
| |
| #define GPIO_SE CONFIG_SND_BFIN_AD73311_SE |
| |
| static struct snd_soc_card bf5xx_ad73311; |
| |
| static int snd_ad73311_startup(void) |
| { |
| pr_debug("%s enter\n", __func__); |
| |
| /* Pull up SE pin on AD73311L */ |
| gpio_set_value(GPIO_SE, 1); |
| return 0; |
| } |
| |
| static int snd_ad73311_configure(void) |
| { |
| unsigned short ctrl_regs[6]; |
| unsigned short status = 0; |
| int count = 0; |
| |
| /* DMCLK = MCLK = 16.384 MHz |
| * SCLK = DMCLK/8 = 2.048 MHz |
| * Sample Rate = DMCLK/2048 = 8 KHz |
| */ |
| ctrl_regs[0] = AD_CONTROL | AD_WRITE | CTRL_REG_B | REGB_MCDIV(0) | \ |
| REGB_SCDIV(0) | REGB_DIRATE(0); |
| ctrl_regs[1] = AD_CONTROL | AD_WRITE | CTRL_REG_C | REGC_PUDEV | \ |
| REGC_PUADC | REGC_PUDAC | REGC_PUREF | REGC_REFUSE ; |
| ctrl_regs[2] = AD_CONTROL | AD_WRITE | CTRL_REG_D | REGD_OGS(2) | \ |
| REGD_IGS(2); |
| ctrl_regs[3] = AD_CONTROL | AD_WRITE | CTRL_REG_E | REGE_DA(0x1f); |
| ctrl_regs[4] = AD_CONTROL | AD_WRITE | CTRL_REG_F | REGF_SEEN ; |
| ctrl_regs[5] = AD_CONTROL | AD_WRITE | CTRL_REG_A | REGA_MODE_DATA; |
| |
| local_irq_disable(); |
| snd_ad73311_startup(); |
| udelay(1); |
| |
| bfin_write_SPORT_TCR1(TFSR); |
| bfin_write_SPORT_TCR2(0xF); |
| SSYNC(); |
| |
| /* SPORT Tx Register is a 8 x 16 FIFO, all the data can be put to |
| * FIFO before enable SPORT to transfer the data |
| */ |
| for (count = 0; count < 6; count++) |
| bfin_write_SPORT_TX16(ctrl_regs[count]); |
| SSYNC(); |
| bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() | TSPEN); |
| SSYNC(); |
| |
| /* When TUVF is set, the data is already send out */ |
| while (!(status & TUVF) && count++ < 10000) { |
| udelay(1); |
| status = bfin_read_SPORT_STAT(); |
| SSYNC(); |
| } |
| bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() & ~TSPEN); |
| SSYNC(); |
| local_irq_enable(); |
| |
| if (count == 10000) { |
| printk(KERN_ERR "ad73311: failed to configure codec\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int bf5xx_probe(struct platform_device *pdev) |
| { |
| int err; |
| if (gpio_request(GPIO_SE, "AD73311_SE")) { |
| printk(KERN_ERR "%s: Failed ro request GPIO_%d\n", __func__, GPIO_SE); |
| return -EBUSY; |
| } |
| |
| gpio_direction_output(GPIO_SE, 0); |
| |
| err = snd_ad73311_configure(); |
| if (err < 0) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int bf5xx_ad73311_startup(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; |
| |
| pr_debug("%s enter\n", __func__); |
| cpu_dai->private_data = sport_handle; |
| return 0; |
| } |
| |
| static int bf5xx_ad73311_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; |
| int ret = 0; |
| |
| pr_debug("%s rate %d format %x\n", __func__, params_rate(params), |
| params_format(params)); |
| |
| /* set cpu DAI configuration */ |
| ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A | |
| SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| |
| static struct snd_soc_ops bf5xx_ad73311_ops = { |
| .startup = bf5xx_ad73311_startup, |
| .hw_params = bf5xx_ad73311_hw_params, |
| }; |
| |
| static struct snd_soc_dai_link bf5xx_ad73311_dai = { |
| .name = "ad73311", |
| .stream_name = "AD73311", |
| .cpu_dai = &bf5xx_i2s_dai, |
| .codec_dai = &ad73311_dai, |
| .ops = &bf5xx_ad73311_ops, |
| }; |
| |
| static struct snd_soc_card bf5xx_ad73311 = { |
| .name = "bf5xx_ad73311", |
| .platform = &bf5xx_i2s_soc_platform, |
| .probe = bf5xx_probe, |
| .dai_link = &bf5xx_ad73311_dai, |
| .num_links = 1, |
| }; |
| |
| static struct snd_soc_device bf5xx_ad73311_snd_devdata = { |
| .card = &bf5xx_ad73311, |
| .codec_dev = &soc_codec_dev_ad73311, |
| }; |
| |
| static struct platform_device *bf52x_ad73311_snd_device; |
| |
| static int __init bf5xx_ad73311_init(void) |
| { |
| int ret; |
| |
| pr_debug("%s enter\n", __func__); |
| bf52x_ad73311_snd_device = platform_device_alloc("soc-audio", -1); |
| if (!bf52x_ad73311_snd_device) |
| return -ENOMEM; |
| |
| platform_set_drvdata(bf52x_ad73311_snd_device, &bf5xx_ad73311_snd_devdata); |
| bf5xx_ad73311_snd_devdata.dev = &bf52x_ad73311_snd_device->dev; |
| ret = platform_device_add(bf52x_ad73311_snd_device); |
| |
| if (ret) |
| platform_device_put(bf52x_ad73311_snd_device); |
| |
| return ret; |
| } |
| |
| static void __exit bf5xx_ad73311_exit(void) |
| { |
| pr_debug("%s enter\n", __func__); |
| platform_device_unregister(bf52x_ad73311_snd_device); |
| } |
| |
| module_init(bf5xx_ad73311_init); |
| module_exit(bf5xx_ad73311_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Cliff Cai"); |
| MODULE_DESCRIPTION("ALSA SoC AD73311 Blackfin"); |
| MODULE_LICENSE("GPL"); |
| |