blob: e28ad81baf1e09d84edcbfef99e1ce945c2264b3 [file] [log] [blame]
/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2008 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
#include <linux/delay.h>
#include <scsi/scsi_tcq.h>
static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
static void qla2x00_process_completed_request(struct scsi_qla_host *,
struct req_que *, uint32_t);
static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *);
static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
sts_entry_t *);
static struct scsi_qla_host *qla2x00_get_rsp_host(struct rsp_que *);
/**
* qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
* @irq:
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
qla2100_intr_handler(int irq, void *dev_id)
{
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
struct device_reg_2xxx __iomem *reg;
int status;
unsigned long iter;
uint16_t hccr;
uint16_t mb[4];
struct rsp_que *rsp;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
printk(KERN_INFO
"%s(): NULL response queue pointer\n", __func__);
return (IRQ_NONE);
}
ha = rsp->hw;
reg = &ha->iobase->isp;
status = 0;
spin_lock(&ha->hardware_lock);
vha = qla2x00_get_rsp_host(rsp);
for (iter = 50; iter--; ) {
hccr = RD_REG_WORD(&reg->hccr);
if (hccr & HCCR_RISC_PAUSE) {
if (pci_channel_offline(ha->pdev))
break;
/*
* Issue a "HARD" reset in order for the RISC interrupt
* bit to be cleared. Schedule a big hammmer to get
* out of the RISC PAUSED state.
*/
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
RD_REG_WORD(&reg->hccr);
ha->isp_ops->fw_dump(vha, 1);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
} else if ((RD_REG_WORD(&reg->istatus) & ISR_RISC_INT) == 0)
break;
if (RD_REG_WORD(&reg->semaphore) & BIT_0) {
WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
RD_REG_WORD(&reg->hccr);
/* Get mailbox data. */
mb[0] = RD_MAILBOX_REG(ha, reg, 0);
if (mb[0] > 0x3fff && mb[0] < 0x8000) {
qla2x00_mbx_completion(vha, mb[0]);
status |= MBX_INTERRUPT;
} else if (mb[0] > 0x7fff && mb[0] < 0xc000) {
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
qla2x00_async_event(vha, rsp, mb);
} else {
/*EMPTY*/
DEBUG2(printk("scsi(%ld): Unrecognized "
"interrupt type (%d).\n",
vha->host_no, mb[0]));
}
/* Release mailbox registers. */
WRT_REG_WORD(&reg->semaphore, 0);
RD_REG_WORD(&reg->semaphore);
} else {
qla2x00_process_response_queue(rsp);
WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
RD_REG_WORD(&reg->hccr);
}
}
spin_unlock(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
return (IRQ_HANDLED);
}
/**
* qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
qla2300_intr_handler(int irq, void *dev_id)
{
scsi_qla_host_t *vha;
struct device_reg_2xxx __iomem *reg;
int status;
unsigned long iter;
uint32_t stat;
uint16_t hccr;
uint16_t mb[4];
struct rsp_que *rsp;
struct qla_hw_data *ha;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
printk(KERN_INFO
"%s(): NULL response queue pointer\n", __func__);
return (IRQ_NONE);
}
ha = rsp->hw;
reg = &ha->iobase->isp;
status = 0;
spin_lock(&ha->hardware_lock);
vha = qla2x00_get_rsp_host(rsp);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
if (stat & HSR_RISC_PAUSED) {
if (pci_channel_offline(ha->pdev))
break;
hccr = RD_REG_WORD(&reg->hccr);
if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
qla_printk(KERN_INFO, ha, "Parity error -- "
"HCCR=%x, Dumping firmware!\n", hccr);
else
qla_printk(KERN_INFO, ha, "RISC paused -- "
"HCCR=%x, Dumping firmware!\n", hccr);
/*
* Issue a "HARD" reset in order for the RISC
* interrupt bit to be cleared. Schedule a big
* hammmer to get out of the RISC PAUSED state.
*/
WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
RD_REG_WORD(&reg->hccr);
ha->isp_ops->fw_dump(vha, 1);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
} else if ((stat & HSR_RISC_INT) == 0)
break;
switch (stat & 0xff) {
case 0x1:
case 0x2:
case 0x10:
case 0x11:
qla2x00_mbx_completion(vha, MSW(stat));
status |= MBX_INTERRUPT;
/* Release mailbox registers. */
WRT_REG_WORD(&reg->semaphore, 0);
break;
case 0x12:
mb[0] = MSW(stat);
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
qla2x00_async_event(vha, rsp, mb);
break;
case 0x13:
qla2x00_process_response_queue(rsp);
break;
case 0x15:
mb[0] = MBA_CMPLT_1_16BIT;
mb[1] = MSW(stat);
qla2x00_async_event(vha, rsp, mb);
break;
case 0x16:
mb[0] = MBA_SCSI_COMPLETION;
mb[1] = MSW(stat);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
qla2x00_async_event(vha, rsp, mb);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
vha->host_no, stat & 0xff));
break;
}
WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
RD_REG_WORD_RELAXED(&reg->hccr);
}
spin_unlock(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
return (IRQ_HANDLED);
}
/**
* qla2x00_mbx_completion() - Process mailbox command completions.
* @ha: SCSI driver HA context
* @mb0: Mailbox0 register
*/
static void
qla2x00_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
{
uint16_t cnt;
uint16_t __iomem *wptr;
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Load return mailbox registers. */
ha->flags.mbox_int = 1;
ha->mailbox_out[0] = mb0;
wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 1);
for (cnt = 1; cnt < ha->mbx_count; cnt++) {
if (IS_QLA2200(ha) && cnt == 8)
wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8);
if (cnt == 4 || cnt == 5)
ha->mailbox_out[cnt] = qla2x00_debounce_register(wptr);
else
ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
wptr++;
}
if (ha->mcp) {
DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n",
__func__, vha->host_no, ha->mcp->mb[0]));
} else {
DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
__func__, vha->host_no));
}
}
/**
* qla2x00_async_event() - Process aynchronous events.
* @ha: SCSI driver HA context
* @mb: Mailbox registers (0 - 3)
*/
void
qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
{
#define LS_UNKNOWN 2
static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
char *link_speed;
uint16_t handle_cnt;
uint16_t cnt;
uint32_t handles[5];
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
unsigned long flags;
/* Setup to process RIO completion. */
handle_cnt = 0;
if (IS_QLA81XX(ha))
goto skip_rio;
switch (mb[0]) {
case MBA_SCSI_COMPLETION:
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
handle_cnt = 1;
break;
case MBA_CMPLT_1_16BIT:
handles[0] = mb[1];
handle_cnt = 1;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_2_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handle_cnt = 2;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_3_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handle_cnt = 3;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_4_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
handle_cnt = 4;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_5_16BIT:
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
handles[4] = (uint32_t)RD_MAILBOX_REG(ha, reg, 7);
handle_cnt = 5;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_2_32BIT:
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
handles[1] = le32_to_cpu(
((uint32_t)(RD_MAILBOX_REG(ha, reg, 7) << 16)) |
RD_MAILBOX_REG(ha, reg, 6));
handle_cnt = 2;
mb[0] = MBA_SCSI_COMPLETION;
break;
default:
break;
}
skip_rio:
switch (mb[0]) {
case MBA_SCSI_COMPLETION: /* Fast Post */
if (!vha->flags.online)
break;
for (cnt = 0; cnt < handle_cnt; cnt++)
qla2x00_process_completed_request(vha, rsp->req,
handles[cnt]);
break;
case MBA_RESET: /* Reset */
DEBUG2(printk("scsi(%ld): Asynchronous RESET.\n",
vha->host_no));
set_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
break;
case MBA_SYSTEM_ERR: /* System Error */
qla_printk(KERN_INFO, ha,
"ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n",
mb[1], mb[2], mb[3]);
ha->isp_ops->fw_dump(vha, 1);
if (IS_FWI2_CAPABLE(ha)) {
if (mb[1] == 0 && mb[2] == 0) {
qla_printk(KERN_ERR, ha,
"Unrecoverable Hardware Error: adapter "
"marked OFFLINE!\n");
vha->flags.online = 0;
} else
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
} else if (mb[1] == 0) {
qla_printk(KERN_INFO, ha,
"Unrecoverable Hardware Error: adapter marked "
"OFFLINE!\n");
vha->flags.online = 0;
} else
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
DEBUG2(printk("scsi(%ld): ISP Request Transfer Error.\n",
vha->host_no));
qla_printk(KERN_WARNING, ha, "ISP Request Transfer Error.\n");
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
DEBUG2(printk("scsi(%ld): ISP Response Transfer Error.\n",
vha->host_no));
qla_printk(KERN_WARNING, ha, "ISP Response Transfer Error.\n");
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
DEBUG2(printk("scsi(%ld): Asynchronous WAKEUP_THRES.\n",
vha->host_no));
break;
case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */
DEBUG2(printk("scsi(%ld): LIP occurred (%x).\n", vha->host_no,
mb[1]));
qla_printk(KERN_INFO, ha, "LIP occurred (%x).\n", mb[1]);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(vha, 1);
}
if (vha->vp_idx) {
atomic_set(&vha->vp_state, VP_FAILED);
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
}
set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
vha->flags.management_server_logged_in = 0;
qla2x00_post_aen_work(vha, FCH_EVT_LIP, mb[1]);
break;
case MBA_LOOP_UP: /* Loop Up Event */
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
link_speed = link_speeds[0];
ha->link_data_rate = PORT_SPEED_1GB;
} else {
link_speed = link_speeds[LS_UNKNOWN];
if (mb[1] < 5)
link_speed = link_speeds[mb[1]];
else if (mb[1] == 0x13)
link_speed = link_speeds[5];
ha->link_data_rate = mb[1];
}
DEBUG2(printk("scsi(%ld): Asynchronous LOOP UP (%s Gbps).\n",
vha->host_no, link_speed));
qla_printk(KERN_INFO, ha, "LOOP UP detected (%s Gbps).\n",
link_speed);
vha->flags.management_server_logged_in = 0;
qla2x00_post_aen_work(vha, FCH_EVT_LINKUP, ha->link_data_rate);
break;
case MBA_LOOP_DOWN: /* Loop Down Event */
DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN "
"(%x %x %x).\n", vha->host_no, mb[1], mb[2], mb[3]));
qla_printk(KERN_INFO, ha, "LOOP DOWN detected (%x %x %x).\n",
mb[1], mb[2], mb[3]);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
vha->device_flags |= DFLG_NO_CABLE;
qla2x00_mark_all_devices_lost(vha, 1);
}
if (vha->vp_idx) {
atomic_set(&vha->vp_state, VP_FAILED);
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
}
vha->flags.management_server_logged_in = 0;
ha->link_data_rate = PORT_SPEED_UNKNOWN;
qla2x00_post_aen_work(vha, FCH_EVT_LINKDOWN, 0);
break;
case MBA_LIP_RESET: /* LIP reset occurred */
DEBUG2(printk("scsi(%ld): Asynchronous LIP RESET (%x).\n",
vha->host_no, mb[1]));
qla_printk(KERN_INFO, ha,
"LIP reset occurred (%x).\n", mb[1]);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(vha, 1);
}
if (vha->vp_idx) {
atomic_set(&vha->vp_state, VP_FAILED);
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
}
set_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
ha->operating_mode = LOOP;
vha->flags.management_server_logged_in = 0;
qla2x00_post_aen_work(vha, FCH_EVT_LIPRESET, mb[1]);
break;
/* case MBA_DCBX_COMPLETE: */
case MBA_POINT_TO_POINT: /* Point-to-Point */
if (IS_QLA2100(ha))
break;
if (IS_QLA81XX(ha))
DEBUG2(printk("scsi(%ld): DCBX Completed -- %04x %04x "
"%04x\n", vha->host_no, mb[1], mb[2], mb[3]));
else
DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE "
"received.\n", vha->host_no));
/*
* Until there's a transition from loop down to loop up, treat
* this as loop down only.
*/
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
if (!atomic_read(&vha->loop_down_timer))
atomic_set(&vha->loop_down_timer,
LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(vha, 1);
}
if (vha->vp_idx) {
atomic_set(&vha->vp_state, VP_FAILED);
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
}
if (!(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)))
set_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
ha->flags.gpsc_supported = 1;
vha->flags.management_server_logged_in = 0;
break;
case MBA_CHG_IN_CONNECTION: /* Change in connection mode */
if (IS_QLA2100(ha))
break;
DEBUG2(printk("scsi(%ld): Asynchronous Change In Connection "
"received.\n",
vha->host_no));
qla_printk(KERN_INFO, ha,
"Configuration change detected: value=%x.\n", mb[1]);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
if (!atomic_read(&vha->loop_down_timer))
atomic_set(&vha->loop_down_timer,
LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(vha, 1);
}
if (vha->vp_idx) {
atomic_set(&vha->vp_state, VP_FAILED);
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
}
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
break;
case MBA_PORT_UPDATE: /* Port database update */
/* Only handle SCNs for our Vport index. */
if (vha->vp_idx && vha->vp_idx != (mb[3] & 0xff))
break;
/*
* If PORT UPDATE is global (received LIP_OCCURRED/LIP_RESET
* event etc. earlier indicating loop is down) then process
* it. Otherwise ignore it and Wait for RSCN to come in.
*/
atomic_set(&vha->loop_down_timer, 0);
if (atomic_read(&vha->loop_state) != LOOP_DOWN &&
atomic_read(&vha->loop_state) != LOOP_DEAD) {
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE "
"ignored %04x/%04x/%04x.\n", vha->host_no, mb[1],
mb[2], mb[3]));
break;
}
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE.\n",
vha->host_no));
DEBUG(printk(KERN_INFO
"scsi(%ld): Port database changed %04x %04x %04x.\n",
vha->host_no, mb[1], mb[2], mb[3]));
/*
* Mark all devices as missing so we will login again.
*/
atomic_set(&vha->loop_state, LOOP_UP);
qla2x00_mark_all_devices_lost(vha, 1);
vha->flags.rscn_queue_overflow = 1;
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
/* Check if the Vport has issued a SCR */
if (vha->vp_idx && test_bit(VP_SCR_NEEDED, &vha->vp_flags))
break;
/* Only handle SCNs for our Vport index. */
if (vha->vp_idx && vha->vp_idx != (mb[3] & 0xff))
break;
DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
vha->host_no));
DEBUG(printk(KERN_INFO
"scsi(%ld): RSCN database changed -- %04x %04x %04x.\n",
vha->host_no, mb[1], mb[2], mb[3]));
rscn_entry = ((mb[1] & 0xff) << 16) | mb[2];
host_pid = (vha->d_id.b.domain << 16) | (vha->d_id.b.area << 8)
| vha->d_id.b.al_pa;
if (rscn_entry == host_pid) {
DEBUG(printk(KERN_INFO
"scsi(%ld): Ignoring RSCN update to local host "
"port ID (%06x)\n",
vha->host_no, host_pid));
break;
}
/* Ignore reserved bits from RSCN-payload. */
rscn_entry = ((mb[1] & 0x3ff) << 16) | mb[2];
rscn_queue_index = vha->rscn_in_ptr + 1;
if (rscn_queue_index == MAX_RSCN_COUNT)
rscn_queue_index = 0;
if (rscn_queue_index != vha->rscn_out_ptr) {
vha->rscn_queue[vha->rscn_in_ptr] = rscn_entry;
vha->rscn_in_ptr = rscn_queue_index;
} else {
vha->flags.rscn_queue_overflow = 1;
}
atomic_set(&vha->loop_state, LOOP_UPDATE);
atomic_set(&vha->loop_down_timer, 0);
vha->flags.management_server_logged_in = 0;
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(RSCN_UPDATE, &vha->dpc_flags);
qla2x00_post_aen_work(vha, FCH_EVT_RSCN, rscn_entry);
break;
/* case MBA_RIO_RESPONSE: */
case MBA_ZIO_RESPONSE:
DEBUG3(printk("scsi(%ld): [R|Z]IO update completion.\n",
vha->host_no));
if (IS_FWI2_CAPABLE(ha))
qla24xx_process_response_queue(rsp);
else
qla2x00_process_response_queue(rsp);
break;
case MBA_DISCARD_RND_FRAME:
DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x "
"%04x.\n", vha->host_no, mb[1], mb[2], mb[3]));
break;
case MBA_TRACE_NOTIFICATION:
DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n",
vha->host_no, mb[1], mb[2]));
break;
case MBA_ISP84XX_ALERT:
DEBUG2(printk("scsi(%ld): ISP84XX Alert Notification -- "
"%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3]));
spin_lock_irqsave(&ha->cs84xx->access_lock, flags);
switch (mb[1]) {
case A84_PANIC_RECOVERY:
qla_printk(KERN_INFO, ha, "Alert 84XX: panic recovery "
"%04x %04x\n", mb[2], mb[3]);
break;
case A84_OP_LOGIN_COMPLETE:
ha->cs84xx->op_fw_version = mb[3] << 16 | mb[2];
DEBUG2(qla_printk(KERN_INFO, ha, "Alert 84XX:"
"firmware version %x\n", ha->cs84xx->op_fw_version));
break;
case A84_DIAG_LOGIN_COMPLETE:
ha->cs84xx->diag_fw_version = mb[3] << 16 | mb[2];
DEBUG2(qla_printk(KERN_INFO, ha, "Alert 84XX:"
"diagnostic firmware version %x\n",
ha->cs84xx->diag_fw_version));
break;
case A84_GOLD_LOGIN_COMPLETE:
ha->cs84xx->diag_fw_version = mb[3] << 16 | mb[2];
ha->cs84xx->fw_update = 1;
DEBUG2(qla_printk(KERN_INFO, ha, "Alert 84XX: gold "
"firmware version %x\n",
ha->cs84xx->gold_fw_version));
break;
default:
qla_printk(KERN_ERR, ha,
"Alert 84xx: Invalid Alert %04x %04x %04x\n",
mb[1], mb[2], mb[3]);
}
spin_unlock_irqrestore(&ha->cs84xx->access_lock, flags);
break;
case MBA_DCBX_START:
DEBUG2(printk("scsi(%ld): DCBX Started -- %04x %04x %04x\n",
vha->host_no, mb[1], mb[2], mb[3]));
break;
case MBA_DCBX_PARAM_UPDATE:
DEBUG2(printk("scsi(%ld): DCBX Parameters Updated -- "
"%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3]));
break;
case MBA_FCF_CONF_ERR:
DEBUG2(printk("scsi(%ld): FCF Configuration Error -- "
"%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3]));
break;
case MBA_IDC_COMPLETE:
DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
"Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2],
mb[3]));
break;
case MBA_IDC_NOTIFY:
DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
"Request Notification -- %04x %04x %04x\n", vha->host_no,
mb[1], mb[2], mb[3]));
/**** Mailbox registers 4 - 7 valid!!! */
break;
case MBA_IDC_TIME_EXT:
DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
"Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1],
mb[2], mb[3]));
/**** Mailbox registers 4 - 7 valid!!! */
break;
}
if (!vha->vp_idx && ha->num_vhosts)
qla2x00_alert_all_vps(rsp, mb);
}
static void
qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data)
{
fc_port_t *fcport = data;
struct scsi_qla_host *vha = fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = NULL;
req = ha->req_q_map[vha->req_ques[0]];
if (!req)
return;
if (req->max_q_depth <= sdev->queue_depth)
return;
if (sdev->ordered_tags)
scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG,
sdev->queue_depth + 1);
else
scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG,
sdev->queue_depth + 1);
fcport->last_ramp_up = jiffies;
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n",
fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
sdev->queue_depth));
}
static void
qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data)
{
fc_port_t *fcport = data;
if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1))
return;
DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw,
"scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n",
fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun,
sdev->queue_depth));
}
static inline void
qla2x00_ramp_up_queue_depth(scsi_qla_host_t *vha, struct req_que *req,
srb_t *sp)
{
fc_port_t *fcport;
struct scsi_device *sdev;
sdev = sp->cmd->device;
if (sdev->queue_depth >= req->max_q_depth)
return;
fcport = sp->fcport;
if (time_before(jiffies,
fcport->last_ramp_up + ql2xqfullrampup * HZ))
return;
if (time_before(jiffies,
fcport->last_queue_full + ql2xqfullrampup * HZ))
return;
starget_for_each_device(sdev->sdev_target, fcport,
qla2x00_adjust_sdev_qdepth_up);
}
/**
* qla2x00_process_completed_request() - Process a Fast Post response.
* @ha: SCSI driver HA context
* @index: SRB index
*/
static void
qla2x00_process_completed_request(struct scsi_qla_host *vha,
struct req_que *req, uint32_t index)
{
srb_t *sp;
struct qla_hw_data *ha = vha->hw;
/* Validate handle. */
if (index >= MAX_OUTSTANDING_COMMANDS) {
DEBUG2(printk("scsi(%ld): Invalid SCSI completion handle %d.\n",
vha->host_no, index));
qla_printk(KERN_WARNING, ha,
"Invalid SCSI completion handle %d.\n", index);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
return;
}
sp = req->outstanding_cmds[index];
if (sp) {
/* Free outstanding command slot. */
req->outstanding_cmds[index] = NULL;
CMD_COMPL_STATUS(sp->cmd) = 0L;
CMD_SCSI_STATUS(sp->cmd) = 0L;
/* Save ISP completion status */
sp->cmd->result = DID_OK << 16;
qla2x00_ramp_up_queue_depth(vha, req, sp);
qla2x00_sp_compl(ha, sp);
} else {
DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
vha->host_no));
qla_printk(KERN_WARNING, ha,
"Invalid ISP SCSI completion handle\n");
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
}
/**
* qla2x00_process_response_queue() - Process response queue entries.
* @ha: SCSI driver HA context
*/
void
qla2x00_process_response_queue(struct rsp_que *rsp)
{
struct scsi_qla_host *vha;
struct qla_hw_data *ha = rsp->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
sts_entry_t *pkt;
uint16_t handle_cnt;
uint16_t cnt;
vha = qla2x00_get_rsp_host(rsp);
if (!vha->flags.online)
return;
while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) {
pkt = (sts_entry_t *)rsp->ring_ptr;
rsp->ring_index++;
if (rsp->ring_index == rsp->length) {
rsp->ring_index = 0;
rsp->ring_ptr = rsp->ring;
} else {
rsp->ring_ptr++;
}
if (pkt->entry_status != 0) {
DEBUG3(printk(KERN_INFO
"scsi(%ld): Process error entry.\n", vha->host_no));
qla2x00_error_entry(vha, rsp, pkt);
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
continue;
}
switch (pkt->entry_type) {
case STATUS_TYPE:
qla2x00_status_entry(vha, rsp, pkt);
break;
case STATUS_TYPE_21:
handle_cnt = ((sts21_entry_t *)pkt)->handle_count;
for (cnt = 0; cnt < handle_cnt; cnt++) {
qla2x00_process_completed_request(vha, rsp->req,
((sts21_entry_t *)pkt)->handle[cnt]);
}
break;
case STATUS_TYPE_22:
handle_cnt = ((sts22_entry_t *)pkt)->handle_count;
for (cnt = 0; cnt < handle_cnt; cnt++) {
qla2x00_process_completed_request(vha, rsp->req,
((sts22_entry_t *)pkt)->handle[cnt]);
}
break;
case STATUS_CONT_TYPE:
qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
break;
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
"scsi(%ld): Received unknown response pkt type %x "
"entry status=%x.\n",
vha->host_no, pkt->entry_type, pkt->entry_status));
break;
}
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
}
/* Adjust ring index */
WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), rsp->ring_index);
}
static inline void
qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
{
struct scsi_cmnd *cp = sp->cmd;
if (sense_len >= SCSI_SENSE_BUFFERSIZE)
sense_len = SCSI_SENSE_BUFFERSIZE;
CMD_ACTUAL_SNSLEN(cp) = sense_len;
sp->request_sense_length = sense_len;
sp->request_sense_ptr = cp->sense_buffer;
if (sp->request_sense_length > 32)
sense_len = 32;
memcpy(cp->sense_buffer, sense_data, sense_len);
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
sp->fcport->vha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
"cmd=%p pid=%ld\n", __func__, sp->fcport->vha->host_no,
cp->device->channel, cp->device->id, cp->device->lun, cp,
cp->serial_number));
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
}
/**
* qla2x00_status_entry() - Process a Status IOCB entry.
* @ha: SCSI driver HA context
* @pkt: Entry pointer
*/
static void
qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
{
srb_t *sp;
fc_port_t *fcport;
struct scsi_cmnd *cp;
sts_entry_t *sts;
struct sts_entry_24xx *sts24;
uint16_t comp_status;
uint16_t scsi_status;
uint8_t lscsi_status;
int32_t resid;
uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len;
uint8_t *rsp_info, *sense_data;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = rsp->req;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
if (IS_FWI2_CAPABLE(ha)) {
comp_status = le16_to_cpu(sts24->comp_status);
scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK;
} else {
comp_status = le16_to_cpu(sts->comp_status);
scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
}
/* Fast path completion. */
if (comp_status == CS_COMPLETE && scsi_status == 0) {
qla2x00_process_completed_request(vha, req, sts->handle);
return;
}
/* Validate handle. */
if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
sp = req->outstanding_cmds[sts->handle];
req->outstanding_cmds[sts->handle] = NULL;
} else
sp = NULL;
if (sp == NULL) {
DEBUG2(printk("scsi(%ld): Status Entry invalid handle.\n",
vha->host_no));
qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n");
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
return;
}
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("scsi(%ld): Command already returned back to OS "
"pkt->handle=%d sp=%p.\n", vha->host_no, sts->handle, sp));
qla_printk(KERN_WARNING, ha,
"Command is NULL: already returned to OS (sp=%p)\n", sp);
return;
}
lscsi_status = scsi_status & STATUS_MASK;
CMD_ENTRY_STATUS(cp) = sts->entry_status;
CMD_COMPL_STATUS(cp) = comp_status;
CMD_SCSI_STATUS(cp) = scsi_status;
fcport = sp->fcport;
sense_len = rsp_info_len = resid_len = fw_resid_len = 0;
if (IS_FWI2_CAPABLE(ha)) {
sense_len = le32_to_cpu(sts24->sense_len);
rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
resid_len = le32_to_cpu(sts24->rsp_residual_count);
fw_resid_len = le32_to_cpu(sts24->residual_len);
rsp_info = sts24->data;
sense_data = sts24->data;
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
} else {
sense_len = le16_to_cpu(sts->req_sense_length);
rsp_info_len = le16_to_cpu(sts->rsp_info_len);
resid_len = le32_to_cpu(sts->residual_length);
rsp_info = sts->rsp_info;
sense_data = sts->req_sense_data;
}
/* Check for any FCP transport errors. */
if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) {
/* Sense data lies beyond any FCP RESPONSE data. */
if (IS_FWI2_CAPABLE(ha))
sense_data += rsp_info_len;
if (rsp_info_len > 3 && rsp_info[3]) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol "
"failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..."
"retrying command\n", vha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, rsp_info_len, rsp_info[0],
rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4],
rsp_info[5], rsp_info[6], rsp_info[7]));
cp->result = DID_BUS_BUSY << 16;
qla2x00_sp_compl(ha, sp);
return;
}
}
/* Check for overrun. */
if (IS_FWI2_CAPABLE(ha) && comp_status == CS_COMPLETE &&
scsi_status & SS_RESIDUAL_OVER)
comp_status = CS_DATA_OVERRUN;
/*
* Based on Host and scsi status generate status code for Linux
*/
switch (comp_status) {
case CS_COMPLETE:
case CS_QUEUE_FULL:
if (scsi_status == 0) {
cp->result = DID_OK << 16;
break;
}
if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) {
resid = resid_len;
scsi_set_resid(cp, resid);
CMD_RESID_LEN(cp) = resid;
if (!lscsi_status &&
((unsigned)(scsi_bufflen(cp) - resid) <
cp->underflow)) {
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): Mid-layer underflow "
"detected (%x of %x bytes)...returning "
"error status.\n", vha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, resid,
scsi_bufflen(cp));
cp->result = DID_ERROR << 16;
break;
}
}
cp->result = DID_OK << 16 | lscsi_status;
if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
DEBUG2(printk(KERN_INFO
"scsi(%ld): QUEUE FULL status detected "
"0x%x-0x%x.\n", vha->host_no, comp_status,
scsi_status));
/* Adjust queue depth for all luns on the port. */
fcport->last_queue_full = jiffies;
starget_for_each_device(cp->device->sdev_target,
fcport, qla2x00_adjust_sdev_qdepth_down);
break;
}
if (lscsi_status != SS_CHECK_CONDITION)
break;
memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
qla2x00_handle_sense(sp, sense_data, sense_len);
break;
case CS_DATA_UNDERRUN:
resid = resid_len;
/* Use F/W calculated residual length. */
if (IS_FWI2_CAPABLE(ha)) {
if (!(scsi_status & SS_RESIDUAL_UNDER)) {
lscsi_status = 0;
} else if (resid != fw_resid_len) {
scsi_status &= ~SS_RESIDUAL_UNDER;
lscsi_status = 0;
}
resid = fw_resid_len;
}
if (scsi_status & SS_RESIDUAL_UNDER) {
scsi_set_resid(cp, resid);
CMD_RESID_LEN(cp) = resid;
} else {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d) UNDERRUN status detected "
"0x%x-0x%x. resid=0x%x fw_resid=0x%x cdb=0x%x "
"os_underflow=0x%x\n", vha->host_no,
cp->device->id, cp->device->lun, comp_status,
scsi_status, resid_len, resid, cp->cmnd[0],
cp->underflow));
}
/*
* Check to see if SCSI Status is non zero. If so report SCSI
* Status.
*/
if (lscsi_status != 0) {
cp->result = DID_OK << 16 | lscsi_status;
if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
DEBUG2(printk(KERN_INFO
"scsi(%ld): QUEUE FULL status detected "
"0x%x-0x%x.\n", vha->host_no, comp_status,
scsi_status));
/*
* Adjust queue depth for all luns on the
* port.
*/
fcport->last_queue_full = jiffies;
starget_for_each_device(
cp->device->sdev_target, fcport,
qla2x00_adjust_sdev_qdepth_down);
break;
}
if (lscsi_status != SS_CHECK_CONDITION)
break;
memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
qla2x00_handle_sense(sp, sense_data, sense_len);
} else {
/*
* If RISC reports underrun and target does not report
* it then we must have a lost frame, so tell upper
* layer to retry it by reporting a bus busy.
*/
if (!(scsi_status & SS_RESIDUAL_UNDER)) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
"frame(s) detected (%x of %x bytes)..."
"retrying command.\n",
vha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, resid,
scsi_bufflen(cp)));
cp->result = DID_BUS_BUSY << 16;
break;
}
/* Handle mid-layer underflow */
if ((unsigned)(scsi_bufflen(cp) - resid) <
cp->underflow) {
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): Mid-layer underflow "
"detected (%x of %x bytes)...returning "
"error status.\n", vha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, resid,
scsi_bufflen(cp));
cp->result = DID_ERROR << 16;
break;
}
/* Everybody online, looking good... */
cp->result = DID_OK << 16;
}
break;
case CS_DATA_OVERRUN:
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n",
vha->host_no, cp->device->id, cp->device->lun, comp_status,
scsi_status));
DEBUG2(printk(KERN_INFO
"CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3],
cp->cmnd[4], cp->cmnd[5]));
DEBUG2(printk(KERN_INFO
"PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR "
"status!\n",
cp->serial_number, scsi_bufflen(cp), resid_len));
cp->result = DID_ERROR << 16;
break;
case CS_PORT_LOGGED_OUT:
case CS_PORT_CONFIG_CHG:
case CS_PORT_BUSY:
case CS_INCOMPLETE:
case CS_PORT_UNAVAILABLE:
/*
* If the port is in Target Down state, return all IOs for this
* Target with DID_NO_CONNECT ELSE Queue the IOs in the
* retry_queue.
*/
DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down "
"pid=%ld, compl status=0x%x, port state=0x%x\n",
vha->host_no, cp->device->id, cp->device->lun,
cp->serial_number, comp_status,
atomic_read(&fcport->state)));
/*
* We are going to have the fc class block the rport
* while we try to recover so instruct the mid layer
* to requeue until the class decides how to handle this.
*/
cp->result = DID_TRANSPORT_DISRUPTED << 16;
if (atomic_read(&fcport->state) == FCS_ONLINE)
qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1);
break;
case CS_RESET:
DEBUG2(printk(KERN_INFO
"scsi(%ld): RESET status detected 0x%x-0x%x.\n",
vha->host_no, comp_status, scsi_status));
cp->result = DID_RESET << 16;
break;
case CS_ABORTED:
/*
* hv2.19.12 - DID_ABORT does not retry the request if we
* aborted this request then abort otherwise it must be a
* reset.
*/
DEBUG2(printk(KERN_INFO
"scsi(%ld): ABORT status detected 0x%x-0x%x.\n",
vha->host_no, comp_status, scsi_status));
cp->result = DID_RESET << 16;
break;
case CS_TIMEOUT:
/*
* We are going to have the fc class block the rport
* while we try to recover so instruct the mid layer
* to requeue until the class decides how to handle this.
*/
cp->result = DID_TRANSPORT_DISRUPTED << 16;
if (IS_FWI2_CAPABLE(ha)) {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected "
"0x%x-0x%x\n", vha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status,
scsi_status));
break;
}
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x "
"sflags=%x.\n", vha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status, scsi_status,
le16_to_cpu(sts->status_flags)));
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1);
break;
default:
DEBUG3(printk("scsi(%ld): Error detected (unknown status) "
"0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status));
qla_printk(KERN_INFO, ha,
"Unknown status detected 0x%x-0x%x.\n",
comp_status, scsi_status);
cp->result = DID_ERROR << 16;
break;
}
/* Place command on done queue. */
if (vha->status_srb == NULL)
qla2x00_sp_compl(ha, sp);
}
/**
* qla2x00_status_cont_entry() - Process a Status Continuations entry.
* @ha: SCSI driver HA context
* @pkt: Entry pointer
*
* Extended sense data.
*/
static void
qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
{
uint8_t sense_sz = 0;
struct qla_hw_data *ha = vha->hw;
srb_t *sp = vha->status_srb;
struct scsi_cmnd *cp;
if (sp != NULL && sp->request_sense_length != 0) {
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("%s(): Cmd already returned back to OS "
"sp=%p.\n", __func__, sp));
qla_printk(KERN_INFO, ha,
"cmd is NULL: already returned to OS (sp=%p)\n",
sp);
vha->status_srb = NULL;
return;
}
if (sp->request_sense_length > sizeof(pkt->data)) {
sense_sz = sizeof(pkt->data);
} else {
sense_sz = sp->request_sense_length;
}
/* Move sense data. */
if (IS_FWI2_CAPABLE(ha))
host_to_fcp_swap(pkt->data, sizeof(pkt->data));
memcpy(sp->request_sense_ptr, pkt->data, sense_sz);
DEBUG5(qla2x00_dump_buffer(sp->request_sense_ptr, sense_sz));
sp->request_sense_ptr += sense_sz;
sp->request_sense_length -= sense_sz;
/* Place command on done queue. */
if (sp->request_sense_length == 0) {
vha->status_srb = NULL;
qla2x00_sp_compl(ha, sp);
}
}
}
/**
* qla2x00_error_entry() - Process an error entry.
* @ha: SCSI driver HA context
* @pkt: Entry pointer
*/
static void
qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
{
srb_t *sp;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = rsp->req;
#if defined(QL_DEBUG_LEVEL_2)
if (pkt->entry_status & RF_INV_E_ORDER)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
else if (pkt->entry_status & RF_INV_E_COUNT)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Count\n", __func__);
else if (pkt->entry_status & RF_INV_E_PARAM)
qla_printk(KERN_ERR, ha,
"%s: Invalid Entry Parameter\n", __func__);
else if (pkt->entry_status & RF_INV_E_TYPE)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Type\n", __func__);
else if (pkt->entry_status & RF_BUSY)
qla_printk(KERN_ERR, ha, "%s: Busy\n", __func__);
else
qla_printk(KERN_ERR, ha, "%s: UNKNOWN flag error\n", __func__);
#endif
/* Validate handle. */
if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
sp = req->outstanding_cmds[pkt->handle];
else
sp = NULL;
if (sp) {
/* Free outstanding command slot. */
req->outstanding_cmds[pkt->handle] = NULL;
/* Bad payload or header */
if (pkt->entry_status &
(RF_INV_E_ORDER | RF_INV_E_COUNT |
RF_INV_E_PARAM | RF_INV_E_TYPE)) {
sp->cmd->result = DID_ERROR << 16;
} else if (pkt->entry_status & RF_BUSY) {
sp->cmd->result = DID_BUS_BUSY << 16;
} else {
sp->cmd->result = DID_ERROR << 16;
}
qla2x00_sp_compl(ha, sp);
} else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type ==
COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) {
DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n",
vha->host_no));
qla_printk(KERN_WARNING, ha,
"Error entry - invalid handle\n");
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
}
/**
* qla24xx_mbx_completion() - Process mailbox command completions.
* @ha: SCSI driver HA context
* @mb0: Mailbox0 register
*/
static void
qla24xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
{
uint16_t cnt;
uint16_t __iomem *wptr;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
/* Load return mailbox registers. */
ha->flags.mbox_int = 1;
ha->mailbox_out[0] = mb0;
wptr = (uint16_t __iomem *)&reg->mailbox1;
for (cnt = 1; cnt < ha->mbx_count; cnt++) {
ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
wptr++;
}
if (ha->mcp) {
DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n",
__func__, vha->host_no, ha->mcp->mb[0]));
} else {
DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
__func__, vha->host_no));
}
}
/**
* qla24xx_process_response_queue() - Process response queue entries.
* @ha: SCSI driver HA context
*/
void
qla24xx_process_response_queue(struct rsp_que *rsp)
{
struct qla_hw_data *ha = rsp->hw;
struct sts_entry_24xx *pkt;
struct scsi_qla_host *vha;
vha = qla2x00_get_rsp_host(rsp);
if (!vha->flags.online)
return;
while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) {
pkt = (struct sts_entry_24xx *)rsp->ring_ptr;
rsp->ring_index++;
if (rsp->ring_index == rsp->length) {
rsp->ring_index = 0;
rsp->ring_ptr = rsp->ring;
} else {
rsp->ring_ptr++;
}
if (pkt->entry_status != 0) {
DEBUG3(printk(KERN_INFO
"scsi(%ld): Process error entry.\n", vha->host_no));
qla2x00_error_entry(vha, rsp, (sts_entry_t *) pkt);
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
continue;
}
switch (pkt->entry_type) {
case STATUS_TYPE:
qla2x00_status_entry(vha, rsp, pkt);
break;
case STATUS_CONT_TYPE:
qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
break;
case VP_RPT_ID_IOCB_TYPE:
qla24xx_report_id_acquisition(vha,
(struct vp_rpt_id_entry_24xx *)pkt);
break;
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
"scsi(%ld): Received unknown response pkt type %x "
"entry status=%x.\n",
vha->host_no, pkt->entry_type, pkt->entry_status));
break;
}
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
}
/* Adjust ring index */
ha->isp_ops->wrt_rsp_reg(ha, rsp->id, rsp->ring_index);
}
static void
qla2xxx_check_risc_status(scsi_qla_host_t *vha)
{
int rval;
uint32_t cnt;
struct qla_hw_data *ha = vha->hw;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
return;
rval = QLA_SUCCESS;
WRT_REG_DWORD(&reg->iobase_addr, 0x7C00);
RD_REG_DWORD(&reg->iobase_addr);
WRT_REG_DWORD(&reg->iobase_window, 0x0001);
for (cnt = 10000; (RD_REG_DWORD(&reg->iobase_window) & BIT_0) == 0 &&
rval == QLA_SUCCESS; cnt--) {
if (cnt) {
WRT_REG_DWORD(&reg->iobase_window, 0x0001);
udelay(10);
} else
rval = QLA_FUNCTION_TIMEOUT;
}
if (rval == QLA_SUCCESS)
goto next_test;
WRT_REG_DWORD(&reg->iobase_window, 0x0003);
for (cnt = 100; (RD_REG_DWORD(&reg->iobase_window) & BIT_0) == 0 &&
rval == QLA_SUCCESS; cnt--) {
if (cnt) {
WRT_REG_DWORD(&reg->iobase_window, 0x0003);
udelay(10);
} else
rval = QLA_FUNCTION_TIMEOUT;
}
if (rval != QLA_SUCCESS)
goto done;
next_test:
if (RD_REG_DWORD(&reg->iobase_c8) & BIT_3)
qla_printk(KERN_INFO, ha, "Additional code -- 0x55AA.\n");
done:
WRT_REG_DWORD(&reg->iobase_window, 0x0000);
RD_REG_DWORD(&reg->iobase_window);
}
/**
* qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
qla24xx_intr_handler(int irq, void *dev_id)
{
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
struct device_reg_24xx __iomem *reg;
int status;
unsigned long iter;
uint32_t stat;
uint32_t hccr;
uint16_t mb[4];
struct rsp_que *rsp;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
printk(KERN_INFO
"%s(): NULL response queue pointer\n", __func__);
return IRQ_NONE;
}
ha = rsp->hw;
reg = &ha->iobase->isp24;
status = 0;
spin_lock(&ha->hardware_lock);
vha = qla2x00_get_rsp_host(rsp);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(&reg->host_status);
if (stat & HSRX_RISC_PAUSED) {
if (pci_channel_offline(ha->pdev))
break;
hccr = RD_REG_DWORD(&reg->hccr);
qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
"Dumping firmware!\n", hccr);
qla2xxx_check_risc_status(vha);
ha->isp_ops->fw_dump(vha, 1);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
} else if ((stat & HSRX_RISC_INT) == 0)
break;
switch (stat & 0xff) {
case 0x1:
case 0x2:
case 0x10:
case 0x11:
qla24xx_mbx_completion(vha, MSW(stat));
status |= MBX_INTERRUPT;
break;
case 0x12:
mb[0] = MSW(stat);
mb[1] = RD_REG_WORD(&reg->mailbox1);
mb[2] = RD_REG_WORD(&reg->mailbox2);
mb[3] = RD_REG_WORD(&reg->mailbox3);
qla2x00_async_event(vha, rsp, mb);
break;
case 0x13:
case 0x14:
qla24xx_process_response_queue(rsp);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
vha->host_no, stat & 0xff));
break;
}
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
RD_REG_DWORD_RELAXED(&reg->hccr);
}
spin_unlock(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
return IRQ_HANDLED;
}
static irqreturn_t
qla24xx_msix_rsp_q(int irq, void *dev_id)
{
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
printk(KERN_INFO
"%s(): NULL response queue pointer\n", __func__);
return IRQ_NONE;
}
ha = rsp->hw;
reg = &ha->iobase->isp24;
spin_lock_irq(&ha->hardware_lock);
qla24xx_process_response_queue(rsp);
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
}
static irqreturn_t
qla25xx_msix_rsp_q(int irq, void *dev_id)
{
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
uint16_t msix_disabled_hccr = 0;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
printk(KERN_INFO
"%s(): NULL response queue pointer\n", __func__);
return IRQ_NONE;
}
ha = rsp->hw;
reg = &ha->iobase->isp24;
spin_lock_irq(&ha->hardware_lock);
msix_disabled_hccr = rsp->options;
if (!rsp->id)
msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22);
else
msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6);
qla24xx_process_response_queue(rsp);
if (!msix_disabled_hccr)
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
}
static irqreturn_t
qla24xx_msix_default(int irq, void *dev_id)
{
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
int status;
uint32_t stat;
uint32_t hccr;
uint16_t mb[4];
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
DEBUG(printk(
"%s(): NULL response queue pointer\n", __func__));
return IRQ_NONE;
}
ha = rsp->hw;
reg = &ha->iobase->isp24;
status = 0;
spin_lock_irq(&ha->hardware_lock);
vha = qla2x00_get_rsp_host(rsp);
do {
stat = RD_REG_DWORD(&reg->host_status);
if (stat & HSRX_RISC_PAUSED) {
if (pci_channel_offline(ha->pdev))
break;
hccr = RD_REG_DWORD(&reg->hccr);
qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
"Dumping firmware!\n", hccr);
qla2xxx_check_risc_status(vha);
ha->isp_ops->fw_dump(vha, 1);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
} else if ((stat & HSRX_RISC_INT) == 0)
break;
switch (stat & 0xff) {
case 0x1:
case 0x2:
case 0x10:
case 0x11:
qla24xx_mbx_completion(vha, MSW(stat));
status |= MBX_INTERRUPT;
break;
case 0x12:
mb[0] = MSW(stat);
mb[1] = RD_REG_WORD(&reg->mailbox1);
mb[2] = RD_REG_WORD(&reg->mailbox2);
mb[3] = RD_REG_WORD(&reg->mailbox3);
qla2x00_async_event(vha, rsp, mb);
break;
case 0x13:
case 0x14:
qla24xx_process_response_queue(rsp);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
vha->host_no, stat & 0xff));
break;
}
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
} while (0);
spin_unlock_irq(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
return IRQ_HANDLED;
}
/* Interrupt handling helpers. */
struct qla_init_msix_entry {
uint16_t entry;
uint16_t index;
const char *name;
irq_handler_t handler;
};
static struct qla_init_msix_entry base_queue = {
.entry = 0,
.index = 0,
.name = "qla2xxx (default)",
.handler = qla24xx_msix_default,
};
static struct qla_init_msix_entry base_rsp_queue = {
.entry = 1,
.index = 1,
.name = "qla2xxx (rsp_q)",
.handler = qla24xx_msix_rsp_q,
};
static struct qla_init_msix_entry multi_rsp_queue = {
.entry = 1,
.index = 1,
.name = "qla2xxx (multi_q)",
.handler = qla25xx_msix_rsp_q,
};
static void
qla24xx_disable_msix(struct qla_hw_data *ha)
{
int i;
struct qla_msix_entry *qentry;
for (i = 0; i < ha->msix_count; i++) {
qentry = &ha->msix_entries[i];
if (qentry->have_irq)
free_irq(qentry->vector, qentry->rsp);
}
pci_disable_msix(ha->pdev);
kfree(ha->msix_entries);
ha->msix_entries = NULL;
ha->flags.msix_enabled = 0;
}
static int
qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
{
#define MIN_MSIX_COUNT 2
int i, ret;
struct msix_entry *entries;
struct qla_msix_entry *qentry;
struct qla_init_msix_entry *msix_queue;
entries = kzalloc(sizeof(struct msix_entry) * ha->msix_count,
GFP_KERNEL);
if (!entries)
return -ENOMEM;
for (i = 0; i < ha->msix_count; i++)
entries[i].entry = i;
ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
if (ret) {
if (ret < MIN_MSIX_COUNT)
goto msix_failed;
qla_printk(KERN_WARNING, ha,
"MSI-X: Failed to enable support -- %d/%d\n"
" Retry with %d vectors\n", ha->msix_count, ret, ret);
ha->msix_count = ret;
ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
if (ret) {
msix_failed:
qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable"
" support, giving up -- %d/%d\n",
ha->msix_count, ret);
goto msix_out;
}
ha->max_queues = ha->msix_count - 1;
}
ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
ha->msix_count, GFP_KERNEL);
if (!ha->msix_entries) {
ret = -ENOMEM;
goto msix_out;
}
ha->flags.msix_enabled = 1;
for (i = 0; i < ha->msix_count; i++) {
qentry = &ha->msix_entries[i];
qentry->vector = entries[i].vector;
qentry->entry = entries[i].entry;
qentry->have_irq = 0;
qentry->rsp = NULL;
}
/* Enable MSI-X for AENs for queue 0 */
qentry = &ha->msix_entries[0];
ret = request_irq(qentry->vector, base_queue.handler, 0,
base_queue.name, rsp);
if (ret) {
qla_printk(KERN_WARNING, ha,
"MSI-X: Unable to register handler -- %x/%d.\n",
qentry->vector, ret);
qla24xx_disable_msix(ha);
goto msix_out;
}
qentry->have_irq = 1;
qentry->rsp = rsp;
/* Enable MSI-X vector for response queue update for queue 0 */
if (ha->max_queues > 1 && ha->mqiobase) {
ha->mqenable = 1;
msix_queue = &multi_rsp_queue;
qla_printk(KERN_INFO, ha,
"MQ enabled, Number of Queue Resources: %d \n",
ha->max_queues);
} else {
ha->mqenable = 0;
msix_queue = &base_rsp_queue;
}
qentry = &ha->msix_entries[1];
ret = request_irq(qentry->vector, msix_queue->handler, 0,
msix_queue->name, rsp);
if (ret) {
qla_printk(KERN_WARNING, ha,
"MSI-X: Unable to register handler -- %x/%d.\n",
qentry->vector, ret);
qla24xx_disable_msix(ha);
ha->mqenable = 0;
goto msix_out;
}
qentry->have_irq = 1;
qentry->rsp = rsp;
msix_out:
kfree(entries);
return ret;
}
int
qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
{
int ret;
device_reg_t __iomem *reg = ha->iobase;
/* If possible, enable MSI-X. */
if (!IS_QLA2432(ha) && !IS_QLA2532(ha) &&
!IS_QLA8432(ha) && !IS_QLA8001(ha))
goto skip_msix;
if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
DEBUG2(qla_printk(KERN_WARNING, ha,
"MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
ha->pdev->revision, ha->fw_attributes));
goto skip_msix;
}
if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
(ha->pdev->subsystem_device == 0x7040 ||
ha->pdev->subsystem_device == 0x7041 ||
ha->pdev->subsystem_device == 0x1705)) {
DEBUG2(qla_printk(KERN_WARNING, ha,
"MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n",
ha->pdev->subsystem_vendor,
ha->pdev->subsystem_device));
goto skip_msi;
}
ret = qla24xx_enable_msix(ha, rsp);
if (!ret) {
DEBUG2(qla_printk(KERN_INFO, ha,
"MSI-X: Enabled (0x%X, 0x%X).\n", ha->chip_revision,
ha->fw_attributes));
goto clear_risc_ints;
}
qla_printk(KERN_WARNING, ha,
"MSI-X: Falling back-to INTa mode -- %d.\n", ret);
skip_msix:
if (!IS_QLA24XX(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) &&
!IS_QLA8001(ha))
goto skip_msi;
ret = pci_enable_msi(ha->pdev);
if (!ret) {
DEBUG2(qla_printk(KERN_INFO, ha, "MSI: Enabled.\n"));
ha->flags.msi_enabled = 1;
}
skip_msi:
ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, rsp);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
ha->pdev->irq);
goto fail;
}
ha->flags.inta_enabled = 1;
clear_risc_ints:
/*
* FIXME: Noted that 8014s were being dropped during NK testing.
* Timing deltas during MSI-X/INTa transitions?
*/
if (IS_QLA81XX(ha))
goto fail;
spin_lock_irq(&ha->hardware_lock);
if (IS_FWI2_CAPABLE(ha)) {
WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_HOST_INT);
WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_RISC_INT);
} else {
WRT_REG_WORD(&reg->isp.semaphore, 0);
WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_RISC_INT);
WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_HOST_INT);
}
spin_unlock_irq(&ha->hardware_lock);
fail:
return ret;
}
void
qla2x00_free_irqs(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
struct rsp_que *rsp = ha->rsp_q_map[0];
if (ha->flags.msix_enabled)
qla24xx_disable_msix(ha);
else if (ha->flags.inta_enabled) {
free_irq(ha->pdev->irq, rsp);
pci_disable_msi(ha->pdev);
}
}
static struct scsi_qla_host *
qla2x00_get_rsp_host(struct rsp_que *rsp)
{
srb_t *sp;
struct qla_hw_data *ha = rsp->hw;
struct scsi_qla_host *vha = NULL;
struct sts_entry_24xx *pkt;
struct req_que *req;
if (rsp->id) {
pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
req = rsp->req;
if (pkt && pkt->handle < MAX_OUTSTANDING_COMMANDS) {
sp = req->outstanding_cmds[pkt->handle];
if (sp)
vha = sp->fcport->vha;
}
}
if (!vha)
/* handle it in base queue */
vha = pci_get_drvdata(ha->pdev);
return vha;
}
int qla25xx_request_irq(struct rsp_que *rsp)
{
struct qla_hw_data *ha = rsp->hw;
struct qla_init_msix_entry *intr = &multi_rsp_queue;
struct qla_msix_entry *msix = rsp->msix;
int ret;
ret = request_irq(msix->vector, intr->handler, 0, intr->name, rsp);
if (ret) {
qla_printk(KERN_WARNING, ha,
"MSI-X: Unable to register handler -- %x/%d.\n",
msix->vector, ret);
return ret;
}
msix->have_irq = 1;
msix->rsp = rsp;
return ret;
}
void
qla25xx_wrt_rsp_reg(struct qla_hw_data *ha, uint16_t id, uint16_t index)
{
device_reg_t __iomem *reg = (void *) ha->mqiobase + QLA_QUE_PAGE * id;
WRT_REG_DWORD(&reg->isp25mq.rsp_q_out, index);
}
void
qla24xx_wrt_rsp_reg(struct qla_hw_data *ha, uint16_t id, uint16_t index)
{
device_reg_t __iomem *reg = (void *) ha->iobase;
WRT_REG_DWORD(&reg->isp24.rsp_q_out, index);
}