arch/arm/mach-sa1100/generic.c - maze/linux - Git at Google

 /*
  * linux/arch/arm/mach-sa1100/generic.c
  *
  * Author: Nicolas Pitre
  *
  * Code common to all SA11x0 machines.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/platform_device.h>
 #include <linux/cnt32_to_63.h>

 #include <asm/div64.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/irq.h>
 #include <asm/gpio.h>

 #include "generic.h"

 unsigned int reset_status;
 EXPORT_SYMBOL(reset_status);

 #define NR_FREQS	16

 /*
  * This table is setup for a 3.6864MHz Crystal.
  */
 static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
 	 590,	/*  59.0 MHz */
 	 737,	/*  73.7 MHz */
 	 885,	/*  88.5 MHz */
 	1032,	/* 103.2 MHz */
 	1180,	/* 118.0 MHz */
 	1327,	/* 132.7 MHz */
 	1475,	/* 147.5 MHz */
 	1622,	/* 162.2 MHz */
 	1769,	/* 176.9 MHz */
 	1917,	/* 191.7 MHz */
 	2064,	/* 206.4 MHz */
 	2212,	/* 221.2 MHz */
 	2359,	/* 235.9 MHz */
 	2507,	/* 250.7 MHz */
 	2654,	/* 265.4 MHz */
 	2802	/* 280.2 MHz */
 };

 #if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
 /* rounds up(!)  */
 unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
 {
 	int i;

 	khz /= 100;

 	for (i = 0; i < NR_FREQS; i++)
 		if (cclk_frequency_100khz[i] >= khz)
 			break;

 	return i;
 }

 unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
 {
 	unsigned int freq = 0;
 	if (idx < NR_FREQS)
 		freq = cclk_frequency_100khz[idx] * 100;
 	return freq;
 }


 /* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
  * this platform, anyway.
  */
 int sa11x0_verify_speed(struct cpufreq_policy *policy)
 {
 	unsigned int tmp;
 	if (policy->cpu)
 		return -EINVAL;

 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);

 	/* make sure that at least one frequency is within the policy */
 	tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
 	if (tmp > policy->max)
 		policy->max = tmp;

 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);

 	return 0;
 }

 unsigned int sa11x0_getspeed(unsigned int cpu)
 {
 	if (cpu)
 		return 0;
 	return cclk_frequency_100khz[PPCR & 0xf] * 100;
 }

 #else
 /*
  * We still need to provide this so building without cpufreq works.
  */
 unsigned int cpufreq_get(unsigned int cpu)
 {
 	return cclk_frequency_100khz[PPCR & 0xf] * 100;
 }
 EXPORT_SYMBOL(cpufreq_get);
 #endif

 /*
  * This is the SA11x0 sched_clock implementation.  This has
  * a resolution of 271ns, and a maximum value of 32025597s (370 days).
  *
  * The return value is guaranteed to be monotonic in that range as
  * long as there is always less than 582 seconds between successive
  * calls to this function.
  *
  *  ( * 1E9 / 3686400 => * 78125 / 288)
  */
 unsigned long long sched_clock(void)
 {
 	unsigned long long v = cnt32_to_63(OSCR);

 	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
 	v *= 78125<<1;
 	do_div(v, 288<<1);

 	return v;
 }

 /*
  * Default power-off for SA1100
  */
 static void sa1100_power_off(void)
 {
 	mdelay(100);
 	local_irq_disable();
 	/* disable internal oscillator, float CS lines */
 	PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
 	/* enable wake-up on GPIO0 (Assabet...) */
 	PWER = GFER = GRER = 1;
 	/*
 	 * set scratchpad to zero, just in case it is used as a
 	 * restart address by the bootloader.
 	 */
 	PSPR = 0;
 	/* enter sleep mode */
 	PMCR = PMCR_SF;
 }

 static struct resource sa11x0udc_resources[] = {
 	[0] = {
 		.start	= 0x80000000,
 		.end	= 0x8000ffff,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static u64 sa11x0udc_dma_mask = 0xffffffffUL;

 static struct platform_device sa11x0udc_device = {
 	.name		= "sa11x0-udc",
 	.id		= -1,
 	.dev		= {
 		.dma_mask = &sa11x0udc_dma_mask,
 		.coherent_dma_mask = 0xffffffff,
 	},
 	.num_resources	= ARRAY_SIZE(sa11x0udc_resources),
 	.resource	= sa11x0udc_resources,
 };

 static struct resource sa11x0uart1_resources[] = {
 	[0] = {
 		.start	= 0x80010000,
 		.end	= 0x8001ffff,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static struct platform_device sa11x0uart1_device = {
 	.name		= "sa11x0-uart",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(sa11x0uart1_resources),
 	.resource	= sa11x0uart1_resources,
 };

 static struct resource sa11x0uart3_resources[] = {
 	[0] = {
 		.start	= 0x80050000,
 		.end	= 0x8005ffff,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static struct platform_device sa11x0uart3_device = {
 	.name		= "sa11x0-uart",
 	.id		= 3,
 	.num_resources	= ARRAY_SIZE(sa11x0uart3_resources),
 	.resource	= sa11x0uart3_resources,
 };

 static struct resource sa11x0mcp_resources[] = {
 	[0] = {
 		.start	= 0x80060000,
 		.end	= 0x8006ffff,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static u64 sa11x0mcp_dma_mask = 0xffffffffUL;

 static struct platform_device sa11x0mcp_device = {
 	.name		= "sa11x0-mcp",
 	.id		= -1,
 	.dev = {
 		.dma_mask = &sa11x0mcp_dma_mask,
 		.coherent_dma_mask = 0xffffffff,
 	},
 	.num_resources	= ARRAY_SIZE(sa11x0mcp_resources),
 	.resource	= sa11x0mcp_resources,
 };

 void sa11x0_set_mcp_data(struct mcp_plat_data *data)
 {
 	sa11x0mcp_device.dev.platform_data = data;
 }

 static struct resource sa11x0ssp_resources[] = {
 	[0] = {
 		.start	= 0x80070000,
 		.end	= 0x8007ffff,
 		.flags	= IORESOURCE_MEM,
 	},
 };

 static u64 sa11x0ssp_dma_mask = 0xffffffffUL;

 static struct platform_device sa11x0ssp_device = {
 	.name		= "sa11x0-ssp",
 	.id		= -1,
 	.dev = {
 		.dma_mask = &sa11x0ssp_dma_mask,
 		.coherent_dma_mask = 0xffffffff,
 	},
 	.num_resources	= ARRAY_SIZE(sa11x0ssp_resources),
 	.resource	= sa11x0ssp_resources,
 };

 static struct resource sa11x0fb_resources[] = {
 	[0] = {
 		.start	= 0xb0100000,
 		.end	= 0xb010ffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= IRQ_LCD,
 		.end	= IRQ_LCD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct platform_device sa11x0fb_device = {
 	.name		= "sa11x0-fb",
 	.id		= -1,
 	.dev = {
 		.coherent_dma_mask = 0xffffffff,
 	},
 	.num_resources	= ARRAY_SIZE(sa11x0fb_resources),
 	.resource	= sa11x0fb_resources,
 };

 static struct platform_device sa11x0pcmcia_device = {
 	.name		= "sa11x0-pcmcia",
 	.id		= -1,
 };

 static struct platform_device sa11x0mtd_device = {
 	.name		= "sa1100-mtd",
 	.id		= -1,
 };

 void sa11x0_set_flash_data(struct flash_platform_data *flash,
 			   struct resource *res, int nr)
 {
 	flash->name = "sa1100";
 	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;
 }

 static struct resource sa11x0ir_resources[] = {
 	{
 		.start	= __PREG(Ser2UTCR0),
 		.end	= __PREG(Ser2UTCR0) + 0x24 - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= __PREG(Ser2HSCR0),
 		.end	= __PREG(Ser2HSCR0) + 0x1c - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= __PREG(Ser2HSCR2),
 		.end	= __PREG(Ser2HSCR2) + 0x04 - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_Ser2ICP,
 		.end	= IRQ_Ser2ICP,
 		.flags	= IORESOURCE_IRQ,
 	}
 };

 static struct platform_device sa11x0ir_device = {
 	.name		= "sa11x0-ir",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(sa11x0ir_resources),
 	.resource	= sa11x0ir_resources,
 };

 void sa11x0_set_irda_data(struct irda_platform_data *irda)
 {
 	sa11x0ir_device.dev.platform_data = irda;
 }

 static struct platform_device sa11x0rtc_device = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
 };

 static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
 	&sa11x0uart3_device,
 	&sa11x0mcp_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
 	&sa11x0fb_device,
 	&sa11x0mtd_device,
 	&sa11x0rtc_device,
 };

 static int __init sa1100_init(void)
 {
 	pm_power_off = sa1100_power_off;

 	if (sa11x0ir_device.dev.platform_data)
 		platform_device_register(&sa11x0ir_device);

 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }

 arch_initcall(sa1100_init);

 void (*sa1100fb_backlight_power)(int on);
 void (*sa1100fb_lcd_power)(int on);

 EXPORT_SYMBOL(sa1100fb_backlight_power);
 EXPORT_SYMBOL(sa1100fb_lcd_power);


 /*
  * Common I/O mapping:
  *
  * Typically, static virtual address mappings are as follow:
  *
  * 0xf0000000-0xf3ffffff:	miscellaneous stuff (CPLDs, etc.)
  * 0xf4000000-0xf4ffffff:	SA-1111
  * 0xf5000000-0xf5ffffff:	reserved (used by cache flushing area)
  * 0xf6000000-0xfffeffff:	reserved (internal SA1100 IO defined above)
  * 0xffff0000-0xffff0fff:	SA1100 exception vectors
  * 0xffff2000-0xffff2fff:	Minicache copy_user_page area
  *
  * Below 0xe8000000 is reserved for vm allocation.
  *
  * The machine specific code must provide the extra mapping beside the
  * default mapping provided here.
  */

 static struct map_desc standard_io_desc[] __initdata = {
 	{	/* PCM */
 		.virtual	=  0xf8000000,
 		.pfn		= __phys_to_pfn(0x80000000),
 		.length		= 0x00100000,
 		.type		= MT_DEVICE
 	}, {	/* SCM */
 		.virtual	=  0xfa000000,
 		.pfn		= __phys_to_pfn(0x90000000),
 		.length		= 0x00100000,
 		.type		= MT_DEVICE
 	}, {	/* MER */
 		.virtual	=  0xfc000000,
 		.pfn		= __phys_to_pfn(0xa0000000),
 		.length		= 0x00100000,
 		.type		= MT_DEVICE
 	}, {	/* LCD + DMA */
 		.virtual	=  0xfe000000,
 		.pfn		= __phys_to_pfn(0xb0000000),
 		.length		= 0x00200000,
 		.type		= MT_DEVICE
 	},
 };

 void __init sa1100_map_io(void)
 {
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 }

 /*
  * Disable the memory bus request/grant signals on the SA1110 to
  * ensure that we don't receive spurious memory requests.  We set
  * the MBGNT signal false to ensure the SA1111 doesn't own the
  * SDRAM bus.
  */
 void __init sa1110_mb_disable(void)
 {
 	unsigned long flags;

 	local_irq_save(flags);

 	PGSR &= ~GPIO_MBGNT;
 	GPCR = GPIO_MBGNT;
 	GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;

 	GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);

 	local_irq_restore(flags);
 }

 /*
  * If the system is going to use the SA-1111 DMA engines, set up
  * the memory bus request/grant pins.
  */
 void __devinit sa1110_mb_enable(void)
 {
 	unsigned long flags;

 	local_irq_save(flags);

 	PGSR &= ~GPIO_MBGNT;
 	GPCR = GPIO_MBGNT;
 	GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;

 	GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
 	TUCR |= TUCR_MR;

 	local_irq_restore(flags);
 }
	/*
	* linux/arch/arm/mach-sa1100/generic.c
	*
	* Author: Nicolas Pitre
	*
	* Code common to all SA11x0 machines.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/
	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/delay.h>
	#include <linux/pm.h>
	#include <linux/cpufreq.h>
	#include <linux/ioport.h>
	#include <linux/sched.h> /* just for sched_clock() - funny that */
	#include <linux/platform_device.h>
	#include <linux/cnt32_to_63.h>

	#include <asm/div64.h>
	#include <mach/hardware.h>
	#include <asm/system.h>
	#include <asm/pgtable.h>
	#include <asm/mach/map.h>
	#include <asm/mach/flash.h>
	#include <asm/irq.h>
	#include <asm/gpio.h>

	#include "generic.h"

	unsigned int reset_status;
	EXPORT_SYMBOL(reset_status);

	#define NR_FREQS 16

	/*
	* This table is setup for a 3.6864MHz Crystal.
	*/
	static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
	590, /* 59.0 MHz */
	737, /* 73.7 MHz */
	885, /* 88.5 MHz */
	1032, /* 103.2 MHz */
	1180, /* 118.0 MHz */
	1327, /* 132.7 MHz */
	1475, /* 147.5 MHz */
	1622, /* 162.2 MHz */
	1769, /* 176.9 MHz */
	1917, /* 191.7 MHz */
	2064, /* 206.4 MHz */
	2212, /* 221.2 MHz */
	2359, /* 235.9 MHz */
	2507, /* 250.7 MHz */
	2654, /* 265.4 MHz */
	2802 /* 280.2 MHz */
	};

	#if defined(CONFIG_CPU_FREQ_SA1100) \|\| defined(CONFIG_CPU_FREQ_SA1110)
	/* rounds up(!) */
	unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
	{
	int i;

	khz /= 100;

	for (i = 0; i < NR_FREQS; i++)
	if (cclk_frequency_100khz[i] >= khz)
	break;

	return i;
	}

	unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
	{
	unsigned int freq = 0;
	if (idx < NR_FREQS)
	freq = cclk_frequency_100khz[idx] * 100;
	return freq;
	}


	/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
	* this platform, anyway.
	*/
	int sa11x0_verify_speed(struct cpufreq_policy *policy)
	{
	unsigned int tmp;
	if (policy->cpu)
	return -EINVAL;

	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);

	/* make sure that at least one frequency is within the policy */
	tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
	if (tmp > policy->max)
	policy->max = tmp;

	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);

	return 0;
	}

	unsigned int sa11x0_getspeed(unsigned int cpu)
	{
	if (cpu)
	return 0;
	return cclk_frequency_100khz[PPCR & 0xf] * 100;
	}

	#else
	/*
	* We still need to provide this so building without cpufreq works.
	*/
	unsigned int cpufreq_get(unsigned int cpu)
	{
	return cclk_frequency_100khz[PPCR & 0xf] * 100;
	}
	EXPORT_SYMBOL(cpufreq_get);
	#endif

	/*
	* This is the SA11x0 sched_clock implementation. This has
	* a resolution of 271ns, and a maximum value of 32025597s (370 days).
	*
	* The return value is guaranteed to be monotonic in that range as
	* long as there is always less than 582 seconds between successive
	* calls to this function.
	*
	* ( * 1E9 / 3686400 => * 78125 / 288)
	*/
	unsigned long long sched_clock(void)
	{
	unsigned long long v = cnt32_to_63(OSCR);

	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
	v *= 78125<<1;
	do_div(v, 288<<1);

	return v;
	}

	/*
	* Default power-off for SA1100
	*/
	static void sa1100_power_off(void)
	{
	mdelay(100);
	local_irq_disable();
	/* disable internal oscillator, float CS lines */
	PCFR = (PCFR_OPDE \| PCFR_FP \| PCFR_FS);
	/* enable wake-up on GPIO0 (Assabet...) */
	PWER = GFER = GRER = 1;
	/*
	* set scratchpad to zero, just in case it is used as a
	* restart address by the bootloader.
	*/
	PSPR = 0;
	/* enter sleep mode */
	PMCR = PMCR_SF;
	}

	static struct resource sa11x0udc_resources[] = {
	[0] = {
	.start = 0x80000000,
	.end = 0x8000ffff,
	.flags = IORESOURCE_MEM,
	},
	};

	static u64 sa11x0udc_dma_mask = 0xffffffffUL;

	static struct platform_device sa11x0udc_device = {
	.name = "sa11x0-udc",
	.id = -1,
	.dev = {
	.dma_mask = &sa11x0udc_dma_mask,
	.coherent_dma_mask = 0xffffffff,
	},
	.num_resources = ARRAY_SIZE(sa11x0udc_resources),
	.resource = sa11x0udc_resources,
	};

	static struct resource sa11x0uart1_resources[] = {
	[0] = {
	.start = 0x80010000,
	.end = 0x8001ffff,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device sa11x0uart1_device = {
	.name = "sa11x0-uart",
	.id = 1,
	.num_resources = ARRAY_SIZE(sa11x0uart1_resources),
	.resource = sa11x0uart1_resources,
	};

	static struct resource sa11x0uart3_resources[] = {
	[0] = {
	.start = 0x80050000,
	.end = 0x8005ffff,
	.flags = IORESOURCE_MEM,
	},
	};

	static struct platform_device sa11x0uart3_device = {
	.name = "sa11x0-uart",
	.id = 3,
	.num_resources = ARRAY_SIZE(sa11x0uart3_resources),
	.resource = sa11x0uart3_resources,
	};

	static struct resource sa11x0mcp_resources[] = {
	[0] = {
	.start = 0x80060000,
	.end = 0x8006ffff,
	.flags = IORESOURCE_MEM,
	},
	};

	static u64 sa11x0mcp_dma_mask = 0xffffffffUL;

	static struct platform_device sa11x0mcp_device = {
	.name = "sa11x0-mcp",
	.id = -1,
	.dev = {
	.dma_mask = &sa11x0mcp_dma_mask,
	.coherent_dma_mask = 0xffffffff,
	},
	.num_resources = ARRAY_SIZE(sa11x0mcp_resources),
	.resource = sa11x0mcp_resources,
	};

	void sa11x0_set_mcp_data(struct mcp_plat_data *data)
	{
	sa11x0mcp_device.dev.platform_data = data;
	}

	static struct resource sa11x0ssp_resources[] = {
	[0] = {
	.start = 0x80070000,
	.end = 0x8007ffff,
	.flags = IORESOURCE_MEM,
	},
	};

	static u64 sa11x0ssp_dma_mask = 0xffffffffUL;

	static struct platform_device sa11x0ssp_device = {
	.name = "sa11x0-ssp",
	.id = -1,
	.dev = {
	.dma_mask = &sa11x0ssp_dma_mask,
	.coherent_dma_mask = 0xffffffff,
	},
	.num_resources = ARRAY_SIZE(sa11x0ssp_resources),
	.resource = sa11x0ssp_resources,
	};

	static struct resource sa11x0fb_resources[] = {
	[0] = {
	.start = 0xb0100000,
	.end = 0xb010ffff,
	.flags = IORESOURCE_MEM,
	},
	[1] = {
	.start = IRQ_LCD,
	.end = IRQ_LCD,
	.flags = IORESOURCE_IRQ,
	},
	};

	static struct platform_device sa11x0fb_device = {
	.name = "sa11x0-fb",
	.id = -1,
	.dev = {
	.coherent_dma_mask = 0xffffffff,
	},
	.num_resources = ARRAY_SIZE(sa11x0fb_resources),
	.resource = sa11x0fb_resources,
	};

	static struct platform_device sa11x0pcmcia_device = {
	.name = "sa11x0-pcmcia",
	.id = -1,
	};

	static struct platform_device sa11x0mtd_device = {
	.name = "sa1100-mtd",
	.id = -1,
	};

	void sa11x0_set_flash_data(struct flash_platform_data *flash,
	struct resource *res, int nr)
	{
	flash->name = "sa1100";
	sa11x0mtd_device.dev.platform_data = flash;
	sa11x0mtd_device.resource = res;
	sa11x0mtd_device.num_resources = nr;
	}

	static struct resource sa11x0ir_resources[] = {
	{
	.start = __PREG(Ser2UTCR0),
	.end = __PREG(Ser2UTCR0) + 0x24 - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.start = __PREG(Ser2HSCR0),
	.end = __PREG(Ser2HSCR0) + 0x1c - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.start = __PREG(Ser2HSCR2),
	.end = __PREG(Ser2HSCR2) + 0x04 - 1,
	.flags = IORESOURCE_MEM,
	}, {
	.start = IRQ_Ser2ICP,
	.end = IRQ_Ser2ICP,
	.flags = IORESOURCE_IRQ,
	}
	};

	static struct platform_device sa11x0ir_device = {
	.name = "sa11x0-ir",
	.id = -1,
	.num_resources = ARRAY_SIZE(sa11x0ir_resources),
	.resource = sa11x0ir_resources,
	};

	void sa11x0_set_irda_data(struct irda_platform_data *irda)
	{
	sa11x0ir_device.dev.platform_data = irda;
	}

	static struct platform_device sa11x0rtc_device = {
	.name = "sa1100-rtc",
	.id = -1,
	};

	static struct platform_device *sa11x0_devices[] __initdata = {
	&sa11x0udc_device,
	&sa11x0uart1_device,
	&sa11x0uart3_device,
	&sa11x0mcp_device,
	&sa11x0ssp_device,
	&sa11x0pcmcia_device,
	&sa11x0fb_device,
	&sa11x0mtd_device,
	&sa11x0rtc_device,
	};

	static int __init sa1100_init(void)
	{
	pm_power_off = sa1100_power_off;

	if (sa11x0ir_device.dev.platform_data)
	platform_device_register(&sa11x0ir_device);

	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
	}

	arch_initcall(sa1100_init);

	void (*sa1100fb_backlight_power)(int on);
	void (*sa1100fb_lcd_power)(int on);

	EXPORT_SYMBOL(sa1100fb_backlight_power);
	EXPORT_SYMBOL(sa1100fb_lcd_power);


	/*
	* Common I/O mapping:
	*
	* Typically, static virtual address mappings are as follow:
	*
	* 0xf0000000-0xf3ffffff: miscellaneous stuff (CPLDs, etc.)
	* 0xf4000000-0xf4ffffff: SA-1111
	* 0xf5000000-0xf5ffffff: reserved (used by cache flushing area)
	* 0xf6000000-0xfffeffff: reserved (internal SA1100 IO defined above)
	* 0xffff0000-0xffff0fff: SA1100 exception vectors
	* 0xffff2000-0xffff2fff: Minicache copy_user_page area
	*
	* Below 0xe8000000 is reserved for vm allocation.
	*
	* The machine specific code must provide the extra mapping beside the
	* default mapping provided here.
	*/

	static struct map_desc standard_io_desc[] __initdata = {
	{ /* PCM */
	.virtual = 0xf8000000,
	.pfn = __phys_to_pfn(0x80000000),
	.length = 0x00100000,
	.type = MT_DEVICE
	}, { /* SCM */
	.virtual = 0xfa000000,
	.pfn = __phys_to_pfn(0x90000000),
	.length = 0x00100000,
	.type = MT_DEVICE
	}, { /* MER */
	.virtual = 0xfc000000,
	.pfn = __phys_to_pfn(0xa0000000),
	.length = 0x00100000,
	.type = MT_DEVICE
	}, { /* LCD + DMA */
	.virtual = 0xfe000000,
	.pfn = __phys_to_pfn(0xb0000000),
	.length = 0x00200000,
	.type = MT_DEVICE
	},
	};

	void __init sa1100_map_io(void)
	{
	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
	}

	/*
	* Disable the memory bus request/grant signals on the SA1110 to
	* ensure that we don't receive spurious memory requests. We set
	* the MBGNT signal false to ensure the SA1111 doesn't own the
	* SDRAM bus.
	*/
	void __init sa1110_mb_disable(void)
	{
	unsigned long flags;

	local_irq_save(flags);

	PGSR &= ~GPIO_MBGNT;
	GPCR = GPIO_MBGNT;
	GPDR = (GPDR & ~GPIO_MBREQ) \| GPIO_MBGNT;

	GAFR &= ~(GPIO_MBGNT \| GPIO_MBREQ);

	local_irq_restore(flags);
	}

	/*
	* If the system is going to use the SA-1111 DMA engines, set up
	* the memory bus request/grant pins.
	*/
	void __devinit sa1110_mb_enable(void)
	{
	unsigned long flags;

	local_irq_save(flags);

	PGSR &= ~GPIO_MBGNT;
	GPCR = GPIO_MBGNT;
	GPDR = (GPDR & ~GPIO_MBREQ) \| GPIO_MBGNT;

	GAFR \|= (GPIO_MBGNT \| GPIO_MBREQ);
	TUCR \|= TUCR_MR;

	local_irq_restore(flags);
	}