| /* |
| * SCSI Enclosure Services |
| * |
| * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com> |
| * |
| **----------------------------------------------------------------------------- |
| ** |
| ** This program is free software; you can redistribute it and/or |
| ** modify it under the terms of the GNU General Public License |
| ** version 2 as published by the Free Software Foundation. |
| ** |
| ** This program is distributed in the hope that it will be useful, |
| ** but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ** GNU General Public License for more details. |
| ** |
| ** You should have received a copy of the GNU General Public License |
| ** along with this program; if not, write to the Free Software |
| ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| ** |
| **----------------------------------------------------------------------------- |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/enclosure.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_driver.h> |
| #include <scsi/scsi_host.h> |
| |
| struct ses_device { |
| unsigned char *page1; |
| unsigned char *page2; |
| unsigned char *page10; |
| short page1_len; |
| short page2_len; |
| short page10_len; |
| }; |
| |
| struct ses_component { |
| u64 addr; |
| unsigned char *desc; |
| }; |
| |
| static int ses_probe(struct device *dev) |
| { |
| struct scsi_device *sdev = to_scsi_device(dev); |
| int err = -ENODEV; |
| |
| if (sdev->type != TYPE_ENCLOSURE) |
| goto out; |
| |
| err = 0; |
| sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n"); |
| |
| out: |
| return err; |
| } |
| |
| #define SES_TIMEOUT (30 * HZ) |
| #define SES_RETRIES 3 |
| |
| static int ses_recv_diag(struct scsi_device *sdev, int page_code, |
| void *buf, int bufflen) |
| { |
| unsigned char cmd[] = { |
| RECEIVE_DIAGNOSTIC, |
| 1, /* Set PCV bit */ |
| page_code, |
| bufflen >> 8, |
| bufflen & 0xff, |
| 0 |
| }; |
| |
| return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, |
| NULL, SES_TIMEOUT, SES_RETRIES, NULL); |
| } |
| |
| static int ses_send_diag(struct scsi_device *sdev, int page_code, |
| void *buf, int bufflen) |
| { |
| u32 result; |
| |
| unsigned char cmd[] = { |
| SEND_DIAGNOSTIC, |
| 0x10, /* Set PF bit */ |
| 0, |
| bufflen >> 8, |
| bufflen & 0xff, |
| 0 |
| }; |
| |
| result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, |
| NULL, SES_TIMEOUT, SES_RETRIES, NULL); |
| if (result) |
| sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", |
| result); |
| return result; |
| } |
| |
| static int ses_set_page2_descriptor(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| unsigned char *desc) |
| { |
| int i, j, count = 0, descriptor = ecomp->number; |
| struct scsi_device *sdev = to_scsi_device(edev->edev.parent); |
| struct ses_device *ses_dev = edev->scratch; |
| unsigned char *type_ptr = ses_dev->page1 + 12 + ses_dev->page1[11]; |
| unsigned char *desc_ptr = ses_dev->page2 + 8; |
| |
| /* Clear everything */ |
| memset(desc_ptr, 0, ses_dev->page2_len - 8); |
| for (i = 0; i < ses_dev->page1[10]; i++, type_ptr += 4) { |
| for (j = 0; j < type_ptr[1]; j++) { |
| desc_ptr += 4; |
| if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && |
| type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) |
| continue; |
| if (count++ == descriptor) { |
| memcpy(desc_ptr, desc, 4); |
| /* set select */ |
| desc_ptr[0] |= 0x80; |
| /* clear reserved, just in case */ |
| desc_ptr[0] &= 0xf0; |
| } |
| } |
| } |
| |
| return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); |
| } |
| |
| static unsigned char *ses_get_page2_descriptor(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| int i, j, count = 0, descriptor = ecomp->number; |
| struct scsi_device *sdev = to_scsi_device(edev->edev.parent); |
| struct ses_device *ses_dev = edev->scratch; |
| unsigned char *type_ptr = ses_dev->page1 + 12 + ses_dev->page1[11]; |
| unsigned char *desc_ptr = ses_dev->page2 + 8; |
| |
| ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); |
| |
| for (i = 0; i < ses_dev->page1[10]; i++, type_ptr += 4) { |
| for (j = 0; j < type_ptr[1]; j++) { |
| desc_ptr += 4; |
| if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && |
| type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) |
| continue; |
| if (count++ == descriptor) |
| return desc_ptr; |
| } |
| } |
| return NULL; |
| } |
| |
| static void ses_get_fault(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| unsigned char *desc; |
| |
| desc = ses_get_page2_descriptor(edev, ecomp); |
| if (desc) |
| ecomp->fault = (desc[3] & 0x60) >> 4; |
| } |
| |
| static int ses_set_fault(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| enum enclosure_component_setting val) |
| { |
| unsigned char desc[4] = {0 }; |
| |
| switch (val) { |
| case ENCLOSURE_SETTING_DISABLED: |
| /* zero is disabled */ |
| break; |
| case ENCLOSURE_SETTING_ENABLED: |
| desc[2] = 0x02; |
| break; |
| default: |
| /* SES doesn't do the SGPIO blink settings */ |
| return -EINVAL; |
| } |
| |
| return ses_set_page2_descriptor(edev, ecomp, desc); |
| } |
| |
| static void ses_get_status(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| unsigned char *desc; |
| |
| desc = ses_get_page2_descriptor(edev, ecomp); |
| if (desc) |
| ecomp->status = (desc[0] & 0x0f); |
| } |
| |
| static void ses_get_locate(struct enclosure_device *edev, |
| struct enclosure_component *ecomp) |
| { |
| unsigned char *desc; |
| |
| desc = ses_get_page2_descriptor(edev, ecomp); |
| if (desc) |
| ecomp->locate = (desc[2] & 0x02) ? 1 : 0; |
| } |
| |
| static int ses_set_locate(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| enum enclosure_component_setting val) |
| { |
| unsigned char desc[4] = {0 }; |
| |
| switch (val) { |
| case ENCLOSURE_SETTING_DISABLED: |
| /* zero is disabled */ |
| break; |
| case ENCLOSURE_SETTING_ENABLED: |
| desc[2] = 0x02; |
| break; |
| default: |
| /* SES doesn't do the SGPIO blink settings */ |
| return -EINVAL; |
| } |
| return ses_set_page2_descriptor(edev, ecomp, desc); |
| } |
| |
| static int ses_set_active(struct enclosure_device *edev, |
| struct enclosure_component *ecomp, |
| enum enclosure_component_setting val) |
| { |
| unsigned char desc[4] = {0 }; |
| |
| switch (val) { |
| case ENCLOSURE_SETTING_DISABLED: |
| /* zero is disabled */ |
| ecomp->active = 0; |
| break; |
| case ENCLOSURE_SETTING_ENABLED: |
| desc[2] = 0x80; |
| ecomp->active = 1; |
| break; |
| default: |
| /* SES doesn't do the SGPIO blink settings */ |
| return -EINVAL; |
| } |
| return ses_set_page2_descriptor(edev, ecomp, desc); |
| } |
| |
| static struct enclosure_component_callbacks ses_enclosure_callbacks = { |
| .get_fault = ses_get_fault, |
| .set_fault = ses_set_fault, |
| .get_status = ses_get_status, |
| .get_locate = ses_get_locate, |
| .set_locate = ses_set_locate, |
| .set_active = ses_set_active, |
| }; |
| |
| struct ses_host_edev { |
| struct Scsi_Host *shost; |
| struct enclosure_device *edev; |
| }; |
| |
| #if 0 |
| int ses_match_host(struct enclosure_device *edev, void *data) |
| { |
| struct ses_host_edev *sed = data; |
| struct scsi_device *sdev; |
| |
| if (!scsi_is_sdev_device(edev->edev.parent)) |
| return 0; |
| |
| sdev = to_scsi_device(edev->edev.parent); |
| |
| if (sdev->host != sed->shost) |
| return 0; |
| |
| sed->edev = edev; |
| return 1; |
| } |
| #endif /* 0 */ |
| |
| static void ses_process_descriptor(struct enclosure_component *ecomp, |
| unsigned char *desc) |
| { |
| int eip = desc[0] & 0x10; |
| int invalid = desc[0] & 0x80; |
| enum scsi_protocol proto = desc[0] & 0x0f; |
| u64 addr = 0; |
| struct ses_component *scomp = ecomp->scratch; |
| unsigned char *d; |
| |
| scomp->desc = desc; |
| |
| if (invalid) |
| return; |
| |
| switch (proto) { |
| case SCSI_PROTOCOL_SAS: |
| if (eip) |
| d = desc + 8; |
| else |
| d = desc + 4; |
| /* only take the phy0 addr */ |
| addr = (u64)d[12] << 56 | |
| (u64)d[13] << 48 | |
| (u64)d[14] << 40 | |
| (u64)d[15] << 32 | |
| (u64)d[16] << 24 | |
| (u64)d[17] << 16 | |
| (u64)d[18] << 8 | |
| (u64)d[19]; |
| break; |
| default: |
| /* FIXME: Need to add more protocols than just SAS */ |
| break; |
| } |
| scomp->addr = addr; |
| } |
| |
| struct efd { |
| u64 addr; |
| struct device *dev; |
| }; |
| |
| static int ses_enclosure_find_by_addr(struct enclosure_device *edev, |
| void *data) |
| { |
| struct efd *efd = data; |
| int i; |
| struct ses_component *scomp; |
| |
| if (!edev->component[0].scratch) |
| return 0; |
| |
| for (i = 0; i < edev->components; i++) { |
| scomp = edev->component[i].scratch; |
| if (scomp->addr != efd->addr) |
| continue; |
| |
| enclosure_add_device(edev, i, efd->dev); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void ses_match_to_enclosure(struct enclosure_device *edev, |
| struct scsi_device *sdev) |
| { |
| unsigned char *buf; |
| unsigned char *desc; |
| unsigned int vpd_len; |
| struct efd efd = { |
| .addr = 0, |
| }; |
| |
| buf = scsi_get_vpd_page(sdev, 0x83); |
| if (!buf) |
| return; |
| |
| vpd_len = ((buf[2] << 8) | buf[3]) + 4; |
| |
| desc = buf + 4; |
| while (desc < buf + vpd_len) { |
| enum scsi_protocol proto = desc[0] >> 4; |
| u8 code_set = desc[0] & 0x0f; |
| u8 piv = desc[1] & 0x80; |
| u8 assoc = (desc[1] & 0x30) >> 4; |
| u8 type = desc[1] & 0x0f; |
| u8 len = desc[3]; |
| |
| if (piv && code_set == 1 && assoc == 1 |
| && proto == SCSI_PROTOCOL_SAS && type == 3 && len == 8) |
| efd.addr = (u64)desc[4] << 56 | |
| (u64)desc[5] << 48 | |
| (u64)desc[6] << 40 | |
| (u64)desc[7] << 32 | |
| (u64)desc[8] << 24 | |
| (u64)desc[9] << 16 | |
| (u64)desc[10] << 8 | |
| (u64)desc[11]; |
| |
| desc += len + 4; |
| } |
| if (!efd.addr) |
| goto free; |
| |
| efd.dev = &sdev->sdev_gendev; |
| |
| enclosure_for_each_device(ses_enclosure_find_by_addr, &efd); |
| free: |
| kfree(buf); |
| } |
| |
| #define INIT_ALLOC_SIZE 32 |
| |
| static int ses_intf_add(struct device *cdev, |
| struct class_interface *intf) |
| { |
| struct scsi_device *sdev = to_scsi_device(cdev->parent); |
| struct scsi_device *tmp_sdev; |
| unsigned char *buf = NULL, *hdr_buf, *type_ptr, *desc_ptr = NULL, |
| *addl_desc_ptr = NULL; |
| struct ses_device *ses_dev; |
| u32 result; |
| int i, j, types, len, page7_len = 0, components = 0; |
| int err = -ENOMEM; |
| struct enclosure_device *edev; |
| struct ses_component *scomp = NULL; |
| |
| if (!scsi_device_enclosure(sdev)) { |
| /* not an enclosure, but might be in one */ |
| struct enclosure_device *prev = NULL; |
| |
| while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) { |
| ses_match_to_enclosure(edev, sdev); |
| prev = edev; |
| } |
| return -ENODEV; |
| } |
| |
| /* TYPE_ENCLOSURE prints a message in probe */ |
| if (sdev->type != TYPE_ENCLOSURE) |
| sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n"); |
| |
| ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL); |
| hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); |
| if (!hdr_buf || !ses_dev) |
| goto err_init_free; |
| |
| result = ses_recv_diag(sdev, 1, hdr_buf, INIT_ALLOC_SIZE); |
| if (result) |
| goto recv_failed; |
| |
| if (hdr_buf[1] != 0) { |
| /* FIXME: need subenclosure support; I've just never |
| * seen a device with subenclosures and it makes the |
| * traversal routines more complex */ |
| sdev_printk(KERN_ERR, sdev, |
| "FIXME driver has no support for subenclosures (%d)\n", |
| hdr_buf[1]); |
| goto err_free; |
| } |
| |
| len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| goto err_free; |
| |
| result = ses_recv_diag(sdev, 1, buf, len); |
| if (result) |
| goto recv_failed; |
| |
| types = buf[10]; |
| |
| type_ptr = buf + 12 + buf[11]; |
| |
| for (i = 0; i < types; i++, type_ptr += 4) { |
| if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || |
| type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) |
| components += type_ptr[1]; |
| } |
| ses_dev->page1 = buf; |
| ses_dev->page1_len = len; |
| buf = NULL; |
| |
| result = ses_recv_diag(sdev, 2, hdr_buf, INIT_ALLOC_SIZE); |
| if (result) |
| goto recv_failed; |
| |
| len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| goto err_free; |
| |
| /* make sure getting page 2 actually works */ |
| result = ses_recv_diag(sdev, 2, buf, len); |
| if (result) |
| goto recv_failed; |
| ses_dev->page2 = buf; |
| ses_dev->page2_len = len; |
| buf = NULL; |
| |
| /* The additional information page --- allows us |
| * to match up the devices */ |
| result = ses_recv_diag(sdev, 10, hdr_buf, INIT_ALLOC_SIZE); |
| if (!result) { |
| |
| len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| buf = kzalloc(len, GFP_KERNEL); |
| if (!buf) |
| goto err_free; |
| |
| result = ses_recv_diag(sdev, 10, buf, len); |
| if (result) |
| goto recv_failed; |
| ses_dev->page10 = buf; |
| ses_dev->page10_len = len; |
| buf = NULL; |
| } |
| |
| scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL); |
| if (!scomp) |
| goto err_free; |
| |
| edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev), |
| components, &ses_enclosure_callbacks); |
| if (IS_ERR(edev)) { |
| err = PTR_ERR(edev); |
| goto err_free; |
| } |
| |
| edev->scratch = ses_dev; |
| for (i = 0; i < components; i++) |
| edev->component[i].scratch = scomp + i; |
| |
| /* Page 7 for the descriptors is optional */ |
| result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE); |
| if (result) |
| goto simple_populate; |
| |
| page7_len = len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; |
| /* add 1 for trailing '\0' we'll use */ |
| buf = kzalloc(len + 1, GFP_KERNEL); |
| if (!buf) |
| goto simple_populate; |
| result = ses_recv_diag(sdev, 7, buf, len); |
| if (result) { |
| simple_populate: |
| kfree(buf); |
| buf = NULL; |
| desc_ptr = NULL; |
| addl_desc_ptr = NULL; |
| } else { |
| desc_ptr = buf + 8; |
| len = (desc_ptr[2] << 8) + desc_ptr[3]; |
| /* skip past overall descriptor */ |
| desc_ptr += len + 4; |
| if (ses_dev->page10) |
| addl_desc_ptr = ses_dev->page10 + 8; |
| } |
| type_ptr = ses_dev->page1 + 12 + ses_dev->page1[11]; |
| components = 0; |
| for (i = 0; i < types; i++, type_ptr += 4) { |
| for (j = 0; j < type_ptr[1]; j++) { |
| char *name = NULL; |
| struct enclosure_component *ecomp; |
| |
| if (desc_ptr) { |
| if (desc_ptr >= buf + page7_len) { |
| desc_ptr = NULL; |
| } else { |
| len = (desc_ptr[2] << 8) + desc_ptr[3]; |
| desc_ptr += 4; |
| /* Add trailing zero - pushes into |
| * reserved space */ |
| desc_ptr[len] = '\0'; |
| name = desc_ptr; |
| } |
| } |
| if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || |
| type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) { |
| |
| ecomp = enclosure_component_register(edev, |
| components++, |
| type_ptr[0], |
| name); |
| |
| if (!IS_ERR(ecomp) && addl_desc_ptr) |
| ses_process_descriptor(ecomp, |
| addl_desc_ptr); |
| } |
| if (desc_ptr) |
| desc_ptr += len; |
| |
| if (addl_desc_ptr) |
| addl_desc_ptr += addl_desc_ptr[1] + 2; |
| |
| } |
| } |
| kfree(buf); |
| kfree(hdr_buf); |
| |
| /* see if there are any devices matching before |
| * we found the enclosure */ |
| shost_for_each_device(tmp_sdev, sdev->host) { |
| if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev)) |
| continue; |
| ses_match_to_enclosure(edev, tmp_sdev); |
| } |
| |
| return 0; |
| |
| recv_failed: |
| sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n", |
| result); |
| err = -ENODEV; |
| err_free: |
| kfree(buf); |
| kfree(scomp); |
| kfree(ses_dev->page10); |
| kfree(ses_dev->page2); |
| kfree(ses_dev->page1); |
| err_init_free: |
| kfree(ses_dev); |
| kfree(hdr_buf); |
| sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err); |
| return err; |
| } |
| |
| static int ses_remove(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static void ses_intf_remove(struct device *cdev, |
| struct class_interface *intf) |
| { |
| struct scsi_device *sdev = to_scsi_device(cdev->parent); |
| struct enclosure_device *edev; |
| struct ses_device *ses_dev; |
| |
| if (!scsi_device_enclosure(sdev)) |
| return; |
| |
| /* exact match to this enclosure */ |
| edev = enclosure_find(cdev->parent, NULL); |
| if (!edev) |
| return; |
| |
| ses_dev = edev->scratch; |
| edev->scratch = NULL; |
| |
| kfree(ses_dev->page10); |
| kfree(ses_dev->page1); |
| kfree(ses_dev->page2); |
| kfree(ses_dev); |
| |
| kfree(edev->component[0].scratch); |
| |
| put_device(&edev->edev); |
| enclosure_unregister(edev); |
| } |
| |
| static struct class_interface ses_interface = { |
| .add_dev = ses_intf_add, |
| .remove_dev = ses_intf_remove, |
| }; |
| |
| static struct scsi_driver ses_template = { |
| .owner = THIS_MODULE, |
| .gendrv = { |
| .name = "ses", |
| .probe = ses_probe, |
| .remove = ses_remove, |
| }, |
| }; |
| |
| static int __init ses_init(void) |
| { |
| int err; |
| |
| err = scsi_register_interface(&ses_interface); |
| if (err) |
| return err; |
| |
| err = scsi_register_driver(&ses_template.gendrv); |
| if (err) |
| goto out_unreg; |
| |
| return 0; |
| |
| out_unreg: |
| scsi_unregister_interface(&ses_interface); |
| return err; |
| } |
| |
| static void __exit ses_exit(void) |
| { |
| scsi_unregister_driver(&ses_template.gendrv); |
| scsi_unregister_interface(&ses_interface); |
| } |
| |
| module_init(ses_init); |
| module_exit(ses_exit); |
| |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE); |
| |
| MODULE_AUTHOR("James Bottomley"); |
| MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver"); |
| MODULE_LICENSE("GPL v2"); |