| /* |
| |
| Broadcom B43 wireless driver |
| |
| DMA ringbuffer and descriptor allocation/management |
| |
| Copyright (c) 2005, 2006 Michael Buesch <m@bues.ch> |
| |
| Some code in this file is derived from the b44.c driver |
| Copyright (C) 2002 David S. Miller |
| Copyright (C) Pekka Pietikainen |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include "b43.h" |
| #include "dma.h" |
| #include "main.h" |
| #include "debugfs.h" |
| #include "xmit.h" |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/skbuff.h> |
| #include <linux/etherdevice.h> |
| #include <linux/slab.h> |
| #include <asm/div64.h> |
| |
| |
| /* Required number of TX DMA slots per TX frame. |
| * This currently is 2, because we put the header and the ieee80211 frame |
| * into separate slots. */ |
| #define TX_SLOTS_PER_FRAME 2 |
| |
| static u32 b43_dma_address(struct b43_dma *dma, dma_addr_t dmaaddr, |
| enum b43_addrtype addrtype) |
| { |
| u32 uninitialized_var(addr); |
| |
| switch (addrtype) { |
| case B43_DMA_ADDR_LOW: |
| addr = lower_32_bits(dmaaddr); |
| if (dma->translation_in_low) { |
| addr &= ~SSB_DMA_TRANSLATION_MASK; |
| addr |= dma->translation; |
| } |
| break; |
| case B43_DMA_ADDR_HIGH: |
| addr = upper_32_bits(dmaaddr); |
| if (!dma->translation_in_low) { |
| addr &= ~SSB_DMA_TRANSLATION_MASK; |
| addr |= dma->translation; |
| } |
| break; |
| case B43_DMA_ADDR_EXT: |
| if (dma->translation_in_low) |
| addr = lower_32_bits(dmaaddr); |
| else |
| addr = upper_32_bits(dmaaddr); |
| addr &= SSB_DMA_TRANSLATION_MASK; |
| addr >>= SSB_DMA_TRANSLATION_SHIFT; |
| break; |
| } |
| |
| return addr; |
| } |
| |
| /* 32bit DMA ops. */ |
| static |
| struct b43_dmadesc_generic *op32_idx2desc(struct b43_dmaring *ring, |
| int slot, |
| struct b43_dmadesc_meta **meta) |
| { |
| struct b43_dmadesc32 *desc; |
| |
| *meta = &(ring->meta[slot]); |
| desc = ring->descbase; |
| desc = &(desc[slot]); |
| |
| return (struct b43_dmadesc_generic *)desc; |
| } |
| |
| static void op32_fill_descriptor(struct b43_dmaring *ring, |
| struct b43_dmadesc_generic *desc, |
| dma_addr_t dmaaddr, u16 bufsize, |
| int start, int end, int irq) |
| { |
| struct b43_dmadesc32 *descbase = ring->descbase; |
| int slot; |
| u32 ctl; |
| u32 addr; |
| u32 addrext; |
| |
| slot = (int)(&(desc->dma32) - descbase); |
| B43_WARN_ON(!(slot >= 0 && slot < ring->nr_slots)); |
| |
| addr = b43_dma_address(&ring->dev->dma, dmaaddr, B43_DMA_ADDR_LOW); |
| addrext = b43_dma_address(&ring->dev->dma, dmaaddr, B43_DMA_ADDR_EXT); |
| |
| ctl = bufsize & B43_DMA32_DCTL_BYTECNT; |
| if (slot == ring->nr_slots - 1) |
| ctl |= B43_DMA32_DCTL_DTABLEEND; |
| if (start) |
| ctl |= B43_DMA32_DCTL_FRAMESTART; |
| if (end) |
| ctl |= B43_DMA32_DCTL_FRAMEEND; |
| if (irq) |
| ctl |= B43_DMA32_DCTL_IRQ; |
| ctl |= (addrext << B43_DMA32_DCTL_ADDREXT_SHIFT) |
| & B43_DMA32_DCTL_ADDREXT_MASK; |
| |
| desc->dma32.control = cpu_to_le32(ctl); |
| desc->dma32.address = cpu_to_le32(addr); |
| } |
| |
| static void op32_poke_tx(struct b43_dmaring *ring, int slot) |
| { |
| b43_dma_write(ring, B43_DMA32_TXINDEX, |
| (u32) (slot * sizeof(struct b43_dmadesc32))); |
| } |
| |
| static void op32_tx_suspend(struct b43_dmaring *ring) |
| { |
| b43_dma_write(ring, B43_DMA32_TXCTL, b43_dma_read(ring, B43_DMA32_TXCTL) |
| | B43_DMA32_TXSUSPEND); |
| } |
| |
| static void op32_tx_resume(struct b43_dmaring *ring) |
| { |
| b43_dma_write(ring, B43_DMA32_TXCTL, b43_dma_read(ring, B43_DMA32_TXCTL) |
| & ~B43_DMA32_TXSUSPEND); |
| } |
| |
| static int op32_get_current_rxslot(struct b43_dmaring *ring) |
| { |
| u32 val; |
| |
| val = b43_dma_read(ring, B43_DMA32_RXSTATUS); |
| val &= B43_DMA32_RXDPTR; |
| |
| return (val / sizeof(struct b43_dmadesc32)); |
| } |
| |
| static void op32_set_current_rxslot(struct b43_dmaring *ring, int slot) |
| { |
| b43_dma_write(ring, B43_DMA32_RXINDEX, |
| (u32) (slot * sizeof(struct b43_dmadesc32))); |
| } |
| |
| static const struct b43_dma_ops dma32_ops = { |
| .idx2desc = op32_idx2desc, |
| .fill_descriptor = op32_fill_descriptor, |
| .poke_tx = op32_poke_tx, |
| .tx_suspend = op32_tx_suspend, |
| .tx_resume = op32_tx_resume, |
| .get_current_rxslot = op32_get_current_rxslot, |
| .set_current_rxslot = op32_set_current_rxslot, |
| }; |
| |
| /* 64bit DMA ops. */ |
| static |
| struct b43_dmadesc_generic *op64_idx2desc(struct b43_dmaring *ring, |
| int slot, |
| struct b43_dmadesc_meta **meta) |
| { |
| struct b43_dmadesc64 *desc; |
| |
| *meta = &(ring->meta[slot]); |
| desc = ring->descbase; |
| desc = &(desc[slot]); |
| |
| return (struct b43_dmadesc_generic *)desc; |
| } |
| |
| static void op64_fill_descriptor(struct b43_dmaring *ring, |
| struct b43_dmadesc_generic *desc, |
| dma_addr_t dmaaddr, u16 bufsize, |
| int start, int end, int irq) |
| { |
| struct b43_dmadesc64 *descbase = ring->descbase; |
| int slot; |
| u32 ctl0 = 0, ctl1 = 0; |
| u32 addrlo, addrhi; |
| u32 addrext; |
| |
| slot = (int)(&(desc->dma64) - descbase); |
| B43_WARN_ON(!(slot >= 0 && slot < ring->nr_slots)); |
| |
| addrlo = b43_dma_address(&ring->dev->dma, dmaaddr, B43_DMA_ADDR_LOW); |
| addrhi = b43_dma_address(&ring->dev->dma, dmaaddr, B43_DMA_ADDR_HIGH); |
| addrext = b43_dma_address(&ring->dev->dma, dmaaddr, B43_DMA_ADDR_EXT); |
| |
| if (slot == ring->nr_slots - 1) |
| ctl0 |= B43_DMA64_DCTL0_DTABLEEND; |
| if (start) |
| ctl0 |= B43_DMA64_DCTL0_FRAMESTART; |
| if (end) |
| ctl0 |= B43_DMA64_DCTL0_FRAMEEND; |
| if (irq) |
| ctl0 |= B43_DMA64_DCTL0_IRQ; |
| ctl1 |= bufsize & B43_DMA64_DCTL1_BYTECNT; |
| ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) |
| & B43_DMA64_DCTL1_ADDREXT_MASK; |
| |
| desc->dma64.control0 = cpu_to_le32(ctl0); |
| desc->dma64.control1 = cpu_to_le32(ctl1); |
| desc->dma64.address_low = cpu_to_le32(addrlo); |
| desc->dma64.address_high = cpu_to_le32(addrhi); |
| } |
| |
| static void op64_poke_tx(struct b43_dmaring *ring, int slot) |
| { |
| b43_dma_write(ring, B43_DMA64_TXINDEX, |
| (u32) (slot * sizeof(struct b43_dmadesc64))); |
| } |
| |
| static void op64_tx_suspend(struct b43_dmaring *ring) |
| { |
| b43_dma_write(ring, B43_DMA64_TXCTL, b43_dma_read(ring, B43_DMA64_TXCTL) |
| | B43_DMA64_TXSUSPEND); |
| } |
| |
| static void op64_tx_resume(struct b43_dmaring *ring) |
| { |
| b43_dma_write(ring, B43_DMA64_TXCTL, b43_dma_read(ring, B43_DMA64_TXCTL) |
| & ~B43_DMA64_TXSUSPEND); |
| } |
| |
| static int op64_get_current_rxslot(struct b43_dmaring *ring) |
| { |
| u32 val; |
| |
| val = b43_dma_read(ring, B43_DMA64_RXSTATUS); |
| val &= B43_DMA64_RXSTATDPTR; |
| |
| return (val / sizeof(struct b43_dmadesc64)); |
| } |
| |
| static void op64_set_current_rxslot(struct b43_dmaring *ring, int slot) |
| { |
| b43_dma_write(ring, B43_DMA64_RXINDEX, |
| (u32) (slot * sizeof(struct b43_dmadesc64))); |
| } |
| |
| static const struct b43_dma_ops dma64_ops = { |
| .idx2desc = op64_idx2desc, |
| .fill_descriptor = op64_fill_descriptor, |
| .poke_tx = op64_poke_tx, |
| .tx_suspend = op64_tx_suspend, |
| .tx_resume = op64_tx_resume, |
| .get_current_rxslot = op64_get_current_rxslot, |
| .set_current_rxslot = op64_set_current_rxslot, |
| }; |
| |
| static inline int free_slots(struct b43_dmaring *ring) |
| { |
| return (ring->nr_slots - ring->used_slots); |
| } |
| |
| static inline int next_slot(struct b43_dmaring *ring, int slot) |
| { |
| B43_WARN_ON(!(slot >= -1 && slot <= ring->nr_slots - 1)); |
| if (slot == ring->nr_slots - 1) |
| return 0; |
| return slot + 1; |
| } |
| |
| static inline int prev_slot(struct b43_dmaring *ring, int slot) |
| { |
| B43_WARN_ON(!(slot >= 0 && slot <= ring->nr_slots - 1)); |
| if (slot == 0) |
| return ring->nr_slots - 1; |
| return slot - 1; |
| } |
| |
| #ifdef CONFIG_B43_DEBUG |
| static void update_max_used_slots(struct b43_dmaring *ring, |
| int current_used_slots) |
| { |
| if (current_used_slots <= ring->max_used_slots) |
| return; |
| ring->max_used_slots = current_used_slots; |
| if (b43_debug(ring->dev, B43_DBG_DMAVERBOSE)) { |
| b43dbg(ring->dev->wl, |
| "max_used_slots increased to %d on %s ring %d\n", |
| ring->max_used_slots, |
| ring->tx ? "TX" : "RX", ring->index); |
| } |
| } |
| #else |
| static inline |
| void update_max_used_slots(struct b43_dmaring *ring, int current_used_slots) |
| { |
| } |
| #endif /* DEBUG */ |
| |
| /* Request a slot for usage. */ |
| static inline int request_slot(struct b43_dmaring *ring) |
| { |
| int slot; |
| |
| B43_WARN_ON(!ring->tx); |
| B43_WARN_ON(ring->stopped); |
| B43_WARN_ON(free_slots(ring) == 0); |
| |
| slot = next_slot(ring, ring->current_slot); |
| ring->current_slot = slot; |
| ring->used_slots++; |
| |
| update_max_used_slots(ring, ring->used_slots); |
| |
| return slot; |
| } |
| |
| static u16 b43_dmacontroller_base(enum b43_dmatype type, int controller_idx) |
| { |
| static const u16 map64[] = { |
| B43_MMIO_DMA64_BASE0, |
| B43_MMIO_DMA64_BASE1, |
| B43_MMIO_DMA64_BASE2, |
| B43_MMIO_DMA64_BASE3, |
| B43_MMIO_DMA64_BASE4, |
| B43_MMIO_DMA64_BASE5, |
| }; |
| static const u16 map32[] = { |
| B43_MMIO_DMA32_BASE0, |
| B43_MMIO_DMA32_BASE1, |
| B43_MMIO_DMA32_BASE2, |
| B43_MMIO_DMA32_BASE3, |
| B43_MMIO_DMA32_BASE4, |
| B43_MMIO_DMA32_BASE5, |
| }; |
| |
| if (type == B43_DMA_64BIT) { |
| B43_WARN_ON(!(controller_idx >= 0 && |
| controller_idx < ARRAY_SIZE(map64))); |
| return map64[controller_idx]; |
| } |
| B43_WARN_ON(!(controller_idx >= 0 && |
| controller_idx < ARRAY_SIZE(map32))); |
| return map32[controller_idx]; |
| } |
| |
| static inline |
| dma_addr_t map_descbuffer(struct b43_dmaring *ring, |
| unsigned char *buf, size_t len, int tx) |
| { |
| dma_addr_t dmaaddr; |
| |
| if (tx) { |
| dmaaddr = dma_map_single(ring->dev->dev->dma_dev, |
| buf, len, DMA_TO_DEVICE); |
| } else { |
| dmaaddr = dma_map_single(ring->dev->dev->dma_dev, |
| buf, len, DMA_FROM_DEVICE); |
| } |
| |
| return dmaaddr; |
| } |
| |
| static inline |
| void unmap_descbuffer(struct b43_dmaring *ring, |
| dma_addr_t addr, size_t len, int tx) |
| { |
| if (tx) { |
| dma_unmap_single(ring->dev->dev->dma_dev, |
| addr, len, DMA_TO_DEVICE); |
| } else { |
| dma_unmap_single(ring->dev->dev->dma_dev, |
| addr, len, DMA_FROM_DEVICE); |
| } |
| } |
| |
| static inline |
| void sync_descbuffer_for_cpu(struct b43_dmaring *ring, |
| dma_addr_t addr, size_t len) |
| { |
| B43_WARN_ON(ring->tx); |
| dma_sync_single_for_cpu(ring->dev->dev->dma_dev, |
| addr, len, DMA_FROM_DEVICE); |
| } |
| |
| static inline |
| void sync_descbuffer_for_device(struct b43_dmaring *ring, |
| dma_addr_t addr, size_t len) |
| { |
| B43_WARN_ON(ring->tx); |
| dma_sync_single_for_device(ring->dev->dev->dma_dev, |
| addr, len, DMA_FROM_DEVICE); |
| } |
| |
| static inline |
| void free_descriptor_buffer(struct b43_dmaring *ring, |
| struct b43_dmadesc_meta *meta) |
| { |
| if (meta->skb) { |
| if (ring->tx) |
| ieee80211_free_txskb(ring->dev->wl->hw, meta->skb); |
| else |
| dev_kfree_skb_any(meta->skb); |
| meta->skb = NULL; |
| } |
| } |
| |
| static int alloc_ringmemory(struct b43_dmaring *ring) |
| { |
| /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K |
| * alignment and 8K buffers for 64-bit DMA with 8K alignment. |
| * In practice we could use smaller buffers for the latter, but the |
| * alignment is really important because of the hardware bug. If bit |
| * 0x00001000 is used in DMA address, some hardware (like BCM4331) |
| * copies that bit into B43_DMA64_RXSTATUS and we get false values from |
| * B43_DMA64_RXSTATDPTR. Let's just use 8K buffers even if we don't use |
| * more than 256 slots for ring. |
| */ |
| u16 ring_mem_size = (ring->type == B43_DMA_64BIT) ? |
| B43_DMA64_RINGMEMSIZE : B43_DMA32_RINGMEMSIZE; |
| |
| ring->descbase = dma_zalloc_coherent(ring->dev->dev->dma_dev, |
| ring_mem_size, &(ring->dmabase), |
| GFP_KERNEL); |
| if (!ring->descbase) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static void free_ringmemory(struct b43_dmaring *ring) |
| { |
| u16 ring_mem_size = (ring->type == B43_DMA_64BIT) ? |
| B43_DMA64_RINGMEMSIZE : B43_DMA32_RINGMEMSIZE; |
| dma_free_coherent(ring->dev->dev->dma_dev, ring_mem_size, |
| ring->descbase, ring->dmabase); |
| } |
| |
| /* Reset the RX DMA channel */ |
| static int b43_dmacontroller_rx_reset(struct b43_wldev *dev, u16 mmio_base, |
| enum b43_dmatype type) |
| { |
| int i; |
| u32 value; |
| u16 offset; |
| |
| might_sleep(); |
| |
| offset = (type == B43_DMA_64BIT) ? B43_DMA64_RXCTL : B43_DMA32_RXCTL; |
| b43_write32(dev, mmio_base + offset, 0); |
| for (i = 0; i < 10; i++) { |
| offset = (type == B43_DMA_64BIT) ? B43_DMA64_RXSTATUS : |
| B43_DMA32_RXSTATUS; |
| value = b43_read32(dev, mmio_base + offset); |
| if (type == B43_DMA_64BIT) { |
| value &= B43_DMA64_RXSTAT; |
| if (value == B43_DMA64_RXSTAT_DISABLED) { |
| i = -1; |
| break; |
| } |
| } else { |
| value &= B43_DMA32_RXSTATE; |
| if (value == B43_DMA32_RXSTAT_DISABLED) { |
| i = -1; |
| break; |
| } |
| } |
| msleep(1); |
| } |
| if (i != -1) { |
| b43err(dev->wl, "DMA RX reset timed out\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /* Reset the TX DMA channel */ |
| static int b43_dmacontroller_tx_reset(struct b43_wldev *dev, u16 mmio_base, |
| enum b43_dmatype type) |
| { |
| int i; |
| u32 value; |
| u16 offset; |
| |
| might_sleep(); |
| |
| for (i = 0; i < 10; i++) { |
| offset = (type == B43_DMA_64BIT) ? B43_DMA64_TXSTATUS : |
| B43_DMA32_TXSTATUS; |
| value = b43_read32(dev, mmio_base + offset); |
| if (type == B43_DMA_64BIT) { |
| value &= B43_DMA64_TXSTAT; |
| if (value == B43_DMA64_TXSTAT_DISABLED || |
| value == B43_DMA64_TXSTAT_IDLEWAIT || |
| value == B43_DMA64_TXSTAT_STOPPED) |
| break; |
| } else { |
| value &= B43_DMA32_TXSTATE; |
| if (value == B43_DMA32_TXSTAT_DISABLED || |
| value == B43_DMA32_TXSTAT_IDLEWAIT || |
| value == B43_DMA32_TXSTAT_STOPPED) |
| break; |
| } |
| msleep(1); |
| } |
| offset = (type == B43_DMA_64BIT) ? B43_DMA64_TXCTL : B43_DMA32_TXCTL; |
| b43_write32(dev, mmio_base + offset, 0); |
| for (i = 0; i < 10; i++) { |
| offset = (type == B43_DMA_64BIT) ? B43_DMA64_TXSTATUS : |
| B43_DMA32_TXSTATUS; |
| value = b43_read32(dev, mmio_base + offset); |
| if (type == B43_DMA_64BIT) { |
| value &= B43_DMA64_TXSTAT; |
| if (value == B43_DMA64_TXSTAT_DISABLED) { |
| i = -1; |
| break; |
| } |
| } else { |
| value &= B43_DMA32_TXSTATE; |
| if (value == B43_DMA32_TXSTAT_DISABLED) { |
| i = -1; |
| break; |
| } |
| } |
| msleep(1); |
| } |
| if (i != -1) { |
| b43err(dev->wl, "DMA TX reset timed out\n"); |
| return -ENODEV; |
| } |
| /* ensure the reset is completed. */ |
| msleep(1); |
| |
| return 0; |
| } |
| |
| /* Check if a DMA mapping address is invalid. */ |
| static bool b43_dma_mapping_error(struct b43_dmaring *ring, |
| dma_addr_t addr, |
| size_t buffersize, bool dma_to_device) |
| { |
| if (unlikely(dma_mapping_error(ring->dev->dev->dma_dev, addr))) |
| return 1; |
| |
| switch (ring->type) { |
| case B43_DMA_30BIT: |
| if ((u64)addr + buffersize > (1ULL << 30)) |
| goto address_error; |
| break; |
| case B43_DMA_32BIT: |
| if ((u64)addr + buffersize > (1ULL << 32)) |
| goto address_error; |
| break; |
| case B43_DMA_64BIT: |
| /* Currently we can't have addresses beyond |
| * 64bit in the kernel. */ |
| break; |
| } |
| |
| /* The address is OK. */ |
| return 0; |
| |
| address_error: |
| /* We can't support this address. Unmap it again. */ |
| unmap_descbuffer(ring, addr, buffersize, dma_to_device); |
| |
| return 1; |
| } |
| |
| static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb) |
| { |
| unsigned char *f = skb->data + ring->frameoffset; |
| |
| return ((f[0] & f[1] & f[2] & f[3] & f[4] & f[5] & f[6] & f[7]) == 0xFF); |
| } |
| |
| static void b43_poison_rx_buffer(struct b43_dmaring *ring, struct sk_buff *skb) |
| { |
| struct b43_rxhdr_fw4 *rxhdr; |
| unsigned char *frame; |
| |
| /* This poisons the RX buffer to detect DMA failures. */ |
| |
| rxhdr = (struct b43_rxhdr_fw4 *)(skb->data); |
| rxhdr->frame_len = 0; |
| |
| B43_WARN_ON(ring->rx_buffersize < ring->frameoffset + sizeof(struct b43_plcp_hdr6) + 2); |
| frame = skb->data + ring->frameoffset; |
| memset(frame, 0xFF, sizeof(struct b43_plcp_hdr6) + 2 /* padding */); |
| } |
| |
| static int setup_rx_descbuffer(struct b43_dmaring *ring, |
| struct b43_dmadesc_generic *desc, |
| struct b43_dmadesc_meta *meta, gfp_t gfp_flags) |
| { |
| dma_addr_t dmaaddr; |
| struct sk_buff *skb; |
| |
| B43_WARN_ON(ring->tx); |
| |
| skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags); |
| if (unlikely(!skb)) |
| return -ENOMEM; |
| b43_poison_rx_buffer(ring, skb); |
| dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0); |
| if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { |
| /* ugh. try to realloc in zone_dma */ |
| gfp_flags |= GFP_DMA; |
| |
| dev_kfree_skb_any(skb); |
| |
| skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags); |
| if (unlikely(!skb)) |
| return -ENOMEM; |
| b43_poison_rx_buffer(ring, skb); |
| dmaaddr = map_descbuffer(ring, skb->data, |
| ring->rx_buffersize, 0); |
| if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { |
| b43err(ring->dev->wl, "RX DMA buffer allocation failed\n"); |
| dev_kfree_skb_any(skb); |
| return -EIO; |
| } |
| } |
| |
| meta->skb = skb; |
| meta->dmaaddr = dmaaddr; |
| ring->ops->fill_descriptor(ring, desc, dmaaddr, |
| ring->rx_buffersize, 0, 0, 0); |
| |
| return 0; |
| } |
| |
| /* Allocate the initial descbuffers. |
| * This is used for an RX ring only. |
| */ |
| static int alloc_initial_descbuffers(struct b43_dmaring *ring) |
| { |
| int i, err = -ENOMEM; |
| struct b43_dmadesc_generic *desc; |
| struct b43_dmadesc_meta *meta; |
| |
| for (i = 0; i < ring->nr_slots; i++) { |
| desc = ring->ops->idx2desc(ring, i, &meta); |
| |
| err = setup_rx_descbuffer(ring, desc, meta, GFP_KERNEL); |
| if (err) { |
| b43err(ring->dev->wl, |
| "Failed to allocate initial descbuffers\n"); |
| goto err_unwind; |
| } |
| } |
| mb(); |
| ring->used_slots = ring->nr_slots; |
| err = 0; |
| out: |
| return err; |
| |
| err_unwind: |
| for (i--; i >= 0; i--) { |
| desc = ring->ops->idx2desc(ring, i, &meta); |
| |
| unmap_descbuffer(ring, meta->dmaaddr, ring->rx_buffersize, 0); |
| dev_kfree_skb(meta->skb); |
| } |
| goto out; |
| } |
| |
| /* Do initial setup of the DMA controller. |
| * Reset the controller, write the ring busaddress |
| * and switch the "enable" bit on. |
| */ |
| static int dmacontroller_setup(struct b43_dmaring *ring) |
| { |
| int err = 0; |
| u32 value; |
| u32 addrext; |
| bool parity = ring->dev->dma.parity; |
| u32 addrlo; |
| u32 addrhi; |
| |
| if (ring->tx) { |
| if (ring->type == B43_DMA_64BIT) { |
| u64 ringbase = (u64) (ring->dmabase); |
| addrext = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_EXT); |
| addrlo = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_LOW); |
| addrhi = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_HIGH); |
| |
| value = B43_DMA64_TXENABLE; |
| value |= (addrext << B43_DMA64_TXADDREXT_SHIFT) |
| & B43_DMA64_TXADDREXT_MASK; |
| if (!parity) |
| value |= B43_DMA64_TXPARITYDISABLE; |
| b43_dma_write(ring, B43_DMA64_TXCTL, value); |
| b43_dma_write(ring, B43_DMA64_TXRINGLO, addrlo); |
| b43_dma_write(ring, B43_DMA64_TXRINGHI, addrhi); |
| } else { |
| u32 ringbase = (u32) (ring->dmabase); |
| addrext = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_EXT); |
| addrlo = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_LOW); |
| |
| value = B43_DMA32_TXENABLE; |
| value |= (addrext << B43_DMA32_TXADDREXT_SHIFT) |
| & B43_DMA32_TXADDREXT_MASK; |
| if (!parity) |
| value |= B43_DMA32_TXPARITYDISABLE; |
| b43_dma_write(ring, B43_DMA32_TXCTL, value); |
| b43_dma_write(ring, B43_DMA32_TXRING, addrlo); |
| } |
| } else { |
| err = alloc_initial_descbuffers(ring); |
| if (err) |
| goto out; |
| if (ring->type == B43_DMA_64BIT) { |
| u64 ringbase = (u64) (ring->dmabase); |
| addrext = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_EXT); |
| addrlo = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_LOW); |
| addrhi = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_HIGH); |
| |
| value = (ring->frameoffset << B43_DMA64_RXFROFF_SHIFT); |
| value |= B43_DMA64_RXENABLE; |
| value |= (addrext << B43_DMA64_RXADDREXT_SHIFT) |
| & B43_DMA64_RXADDREXT_MASK; |
| if (!parity) |
| value |= B43_DMA64_RXPARITYDISABLE; |
| b43_dma_write(ring, B43_DMA64_RXCTL, value); |
| b43_dma_write(ring, B43_DMA64_RXRINGLO, addrlo); |
| b43_dma_write(ring, B43_DMA64_RXRINGHI, addrhi); |
| b43_dma_write(ring, B43_DMA64_RXINDEX, ring->nr_slots * |
| sizeof(struct b43_dmadesc64)); |
| } else { |
| u32 ringbase = (u32) (ring->dmabase); |
| addrext = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_EXT); |
| addrlo = b43_dma_address(&ring->dev->dma, ringbase, B43_DMA_ADDR_LOW); |
| |
| value = (ring->frameoffset << B43_DMA32_RXFROFF_SHIFT); |
| value |= B43_DMA32_RXENABLE; |
| value |= (addrext << B43_DMA32_RXADDREXT_SHIFT) |
| & B43_DMA32_RXADDREXT_MASK; |
| if (!parity) |
| value |= B43_DMA32_RXPARITYDISABLE; |
| b43_dma_write(ring, B43_DMA32_RXCTL, value); |
| b43_dma_write(ring, B43_DMA32_RXRING, addrlo); |
| b43_dma_write(ring, B43_DMA32_RXINDEX, ring->nr_slots * |
| sizeof(struct b43_dmadesc32)); |
| } |
| } |
| |
| out: |
| return err; |
| } |
| |
| /* Shutdown the DMA controller. */ |
| static void dmacontroller_cleanup(struct b43_dmaring *ring) |
| { |
| if (ring->tx) { |
| b43_dmacontroller_tx_reset(ring->dev, ring->mmio_base, |
| ring->type); |
| if (ring->type == B43_DMA_64BIT) { |
| b43_dma_write(ring, B43_DMA64_TXRINGLO, 0); |
| b43_dma_write(ring, B43_DMA64_TXRINGHI, 0); |
| } else |
| b43_dma_write(ring, B43_DMA32_TXRING, 0); |
| } else { |
| b43_dmacontroller_rx_reset(ring->dev, ring->mmio_base, |
| ring->type); |
| if (ring->type == B43_DMA_64BIT) { |
| b43_dma_write(ring, B43_DMA64_RXRINGLO, 0); |
| b43_dma_write(ring, B43_DMA64_RXRINGHI, 0); |
| } else |
| b43_dma_write(ring, B43_DMA32_RXRING, 0); |
| } |
| } |
| |
| static void free_all_descbuffers(struct b43_dmaring *ring) |
| { |
| struct b43_dmadesc_meta *meta; |
| int i; |
| |
| if (!ring->used_slots) |
| return; |
| for (i = 0; i < ring->nr_slots; i++) { |
| /* get meta - ignore returned value */ |
| ring->ops->idx2desc(ring, i, &meta); |
| |
| if (!meta->skb || b43_dma_ptr_is_poisoned(meta->skb)) { |
| B43_WARN_ON(!ring->tx); |
| continue; |
| } |
| if (ring->tx) { |
| unmap_descbuffer(ring, meta->dmaaddr, |
| meta->skb->len, 1); |
| } else { |
| unmap_descbuffer(ring, meta->dmaaddr, |
| ring->rx_buffersize, 0); |
| } |
| free_descriptor_buffer(ring, meta); |
| } |
| } |
| |
| static u64 supported_dma_mask(struct b43_wldev *dev) |
| { |
| u32 tmp; |
| u16 mmio_base; |
| |
| switch (dev->dev->bus_type) { |
| #ifdef CONFIG_B43_BCMA |
| case B43_BUS_BCMA: |
| tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST); |
| if (tmp & BCMA_IOST_DMA64) |
| return DMA_BIT_MASK(64); |
| break; |
| #endif |
| #ifdef CONFIG_B43_SSB |
| case B43_BUS_SSB: |
| tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); |
| if (tmp & SSB_TMSHIGH_DMA64) |
| return DMA_BIT_MASK(64); |
| break; |
| #endif |
| } |
| |
| mmio_base = b43_dmacontroller_base(0, 0); |
| b43_write32(dev, mmio_base + B43_DMA32_TXCTL, B43_DMA32_TXADDREXT_MASK); |
| tmp = b43_read32(dev, mmio_base + B43_DMA32_TXCTL); |
| if (tmp & B43_DMA32_TXADDREXT_MASK) |
| return DMA_BIT_MASK(32); |
| |
| return DMA_BIT_MASK(30); |
| } |
| |
| static enum b43_dmatype dma_mask_to_engine_type(u64 dmamask) |
| { |
| if (dmamask == DMA_BIT_MASK(30)) |
| return B43_DMA_30BIT; |
| if (dmamask == DMA_BIT_MASK(32)) |
| return B43_DMA_32BIT; |
| if (dmamask == DMA_BIT_MASK(64)) |
| return B43_DMA_64BIT; |
| B43_WARN_ON(1); |
| return B43_DMA_30BIT; |
| } |
| |
| /* Main initialization function. */ |
| static |
| struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, |
| int controller_index, |
| int for_tx, |
| enum b43_dmatype type) |
| { |
| struct b43_dmaring *ring; |
| int i, err; |
| dma_addr_t dma_test; |
| |
| ring = kzalloc(sizeof(*ring), GFP_KERNEL); |
| if (!ring) |
| goto out; |
| |
| ring->nr_slots = B43_RXRING_SLOTS; |
| if (for_tx) |
| ring->nr_slots = B43_TXRING_SLOTS; |
| |
| ring->meta = kcalloc(ring->nr_slots, sizeof(struct b43_dmadesc_meta), |
| GFP_KERNEL); |
| if (!ring->meta) |
| goto err_kfree_ring; |
| for (i = 0; i < ring->nr_slots; i++) |
| ring->meta->skb = B43_DMA_PTR_POISON; |
| |
| ring->type = type; |
| ring->dev = dev; |
| ring->mmio_base = b43_dmacontroller_base(type, controller_index); |
| ring->index = controller_index; |
| if (type == B43_DMA_64BIT) |
| ring->ops = &dma64_ops; |
| else |
| ring->ops = &dma32_ops; |
| if (for_tx) { |
| ring->tx = true; |
| ring->current_slot = -1; |
| } else { |
| if (ring->index == 0) { |
| switch (dev->fw.hdr_format) { |
| case B43_FW_HDR_598: |
| ring->rx_buffersize = B43_DMA0_RX_FW598_BUFSIZE; |
| ring->frameoffset = B43_DMA0_RX_FW598_FO; |
| break; |
| case B43_FW_HDR_410: |
| case B43_FW_HDR_351: |
| ring->rx_buffersize = B43_DMA0_RX_FW351_BUFSIZE; |
| ring->frameoffset = B43_DMA0_RX_FW351_FO; |
| break; |
| } |
| } else |
| B43_WARN_ON(1); |
| } |
| #ifdef CONFIG_B43_DEBUG |
| ring->last_injected_overflow = jiffies; |
| #endif |
| |
| if (for_tx) { |
| /* Assumption: B43_TXRING_SLOTS can be divided by TX_SLOTS_PER_FRAME */ |
| BUILD_BUG_ON(B43_TXRING_SLOTS % TX_SLOTS_PER_FRAME != 0); |
| |
| ring->txhdr_cache = kcalloc(ring->nr_slots / TX_SLOTS_PER_FRAME, |
| b43_txhdr_size(dev), |
| GFP_KERNEL); |
| if (!ring->txhdr_cache) |
| goto err_kfree_meta; |
| |
| /* test for ability to dma to txhdr_cache */ |
| dma_test = dma_map_single(dev->dev->dma_dev, |
| ring->txhdr_cache, |
| b43_txhdr_size(dev), |
| DMA_TO_DEVICE); |
| |
| if (b43_dma_mapping_error(ring, dma_test, |
| b43_txhdr_size(dev), 1)) { |
| /* ugh realloc */ |
| kfree(ring->txhdr_cache); |
| ring->txhdr_cache = kcalloc(ring->nr_slots / TX_SLOTS_PER_FRAME, |
| b43_txhdr_size(dev), |
| GFP_KERNEL | GFP_DMA); |
| if (!ring->txhdr_cache) |
| goto err_kfree_meta; |
| |
| dma_test = dma_map_single(dev->dev->dma_dev, |
| ring->txhdr_cache, |
| b43_txhdr_size(dev), |
| DMA_TO_DEVICE); |
| |
| if (b43_dma_mapping_error(ring, dma_test, |
| b43_txhdr_size(dev), 1)) { |
| |
| b43err(dev->wl, |
| "TXHDR DMA allocation failed\n"); |
| goto err_kfree_txhdr_cache; |
| } |
| } |
| |
| dma_unmap_single(dev->dev->dma_dev, |
| dma_test, b43_txhdr_size(dev), |
| DMA_TO_DEVICE); |
| } |
| |
| err = alloc_ringmemory(ring); |
| if (err) |
| goto err_kfree_txhdr_cache; |
| err = dmacontroller_setup(ring); |
| if (err) |
| goto err_free_ringmemory; |
| |
| out: |
| return ring; |
| |
| err_free_ringmemory: |
| free_ringmemory(ring); |
| err_kfree_txhdr_cache: |
| kfree(ring->txhdr_cache); |
| err_kfree_meta: |
| kfree(ring->meta); |
| err_kfree_ring: |
| kfree(ring); |
| ring = NULL; |
| goto out; |
| } |
| |
| #define divide(a, b) ({ \ |
| typeof(a) __a = a; \ |
| do_div(__a, b); \ |
| __a; \ |
| }) |
| |
| #define modulo(a, b) ({ \ |
| typeof(a) __a = a; \ |
| do_div(__a, b); \ |
| }) |
| |
| /* Main cleanup function. */ |
| static void b43_destroy_dmaring(struct b43_dmaring *ring, |
| const char *ringname) |
| { |
| if (!ring) |
| return; |
| |
| #ifdef CONFIG_B43_DEBUG |
| { |
| /* Print some statistics. */ |
| u64 failed_packets = ring->nr_failed_tx_packets; |
| u64 succeed_packets = ring->nr_succeed_tx_packets; |
| u64 nr_packets = failed_packets + succeed_packets; |
| u64 permille_failed = 0, average_tries = 0; |
| |
| if (nr_packets) |
| permille_failed = divide(failed_packets * 1000, nr_packets); |
| if (nr_packets) |
| average_tries = divide(ring->nr_total_packet_tries * 100, nr_packets); |
| |
| b43dbg(ring->dev->wl, "DMA-%u %s: " |
| "Used slots %d/%d, Failed frames %llu/%llu = %llu.%01llu%%, " |
| "Average tries %llu.%02llu\n", |
| (unsigned int)(ring->type), ringname, |
| ring->max_used_slots, |
| ring->nr_slots, |
| (unsigned long long)failed_packets, |
| (unsigned long long)nr_packets, |
| (unsigned long long)divide(permille_failed, 10), |
| (unsigned long long)modulo(permille_failed, 10), |
| (unsigned long long)divide(average_tries, 100), |
| (unsigned long long)modulo(average_tries, 100)); |
| } |
| #endif /* DEBUG */ |
| |
| /* Device IRQs are disabled prior entering this function, |
| * so no need to take care of concurrency with rx handler stuff. |
| */ |
| dmacontroller_cleanup(ring); |
| free_all_descbuffers(ring); |
| free_ringmemory(ring); |
| |
| kfree(ring->txhdr_cache); |
| kfree(ring->meta); |
| kfree(ring); |
| } |
| |
| #define destroy_ring(dma, ring) do { \ |
| b43_destroy_dmaring((dma)->ring, __stringify(ring)); \ |
| (dma)->ring = NULL; \ |
| } while (0) |
| |
| void b43_dma_free(struct b43_wldev *dev) |
| { |
| struct b43_dma *dma; |
| |
| if (b43_using_pio_transfers(dev)) |
| return; |
| dma = &dev->dma; |
| |
| destroy_ring(dma, rx_ring); |
| destroy_ring(dma, tx_ring_AC_BK); |
| destroy_ring(dma, tx_ring_AC_BE); |
| destroy_ring(dma, tx_ring_AC_VI); |
| destroy_ring(dma, tx_ring_AC_VO); |
| destroy_ring(dma, tx_ring_mcast); |
| } |
| |
| static int b43_dma_set_mask(struct b43_wldev *dev, u64 mask) |
| { |
| u64 orig_mask = mask; |
| bool fallback = false; |
| int err; |
| |
| /* Try to set the DMA mask. If it fails, try falling back to a |
| * lower mask, as we can always also support a lower one. */ |
| while (1) { |
| err = dma_set_mask(dev->dev->dma_dev, mask); |
| if (!err) { |
| err = dma_set_coherent_mask(dev->dev->dma_dev, mask); |
| if (!err) |
| break; |
| } |
| if (mask == DMA_BIT_MASK(64)) { |
| mask = DMA_BIT_MASK(32); |
| fallback = true; |
| continue; |
| } |
| if (mask == DMA_BIT_MASK(32)) { |
| mask = DMA_BIT_MASK(30); |
| fallback = true; |
| continue; |
| } |
| b43err(dev->wl, "The machine/kernel does not support " |
| "the required %u-bit DMA mask\n", |
| (unsigned int)dma_mask_to_engine_type(orig_mask)); |
| return -EOPNOTSUPP; |
| } |
| if (fallback) { |
| b43info(dev->wl, "DMA mask fallback from %u-bit to %u-bit\n", |
| (unsigned int)dma_mask_to_engine_type(orig_mask), |
| (unsigned int)dma_mask_to_engine_type(mask)); |
| } |
| |
| return 0; |
| } |
| |
| /* Some hardware with 64-bit DMA seems to be bugged and looks for translation |
| * bit in low address word instead of high one. |
| */ |
| static bool b43_dma_translation_in_low_word(struct b43_wldev *dev, |
| enum b43_dmatype type) |
| { |
| if (type != B43_DMA_64BIT) |
| return 1; |
| |
| #ifdef CONFIG_B43_SSB |
| if (dev->dev->bus_type == B43_BUS_SSB && |
| dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI && |
| !(pci_is_pcie(dev->dev->sdev->bus->host_pci) && |
| ssb_read32(dev->dev->sdev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64)) |
| return 1; |
| #endif |
| return 0; |
| } |
| |
| int b43_dma_init(struct b43_wldev *dev) |
| { |
| struct b43_dma *dma = &dev->dma; |
| int err; |
| u64 dmamask; |
| enum b43_dmatype type; |
| |
| dmamask = supported_dma_mask(dev); |
| type = dma_mask_to_engine_type(dmamask); |
| err = b43_dma_set_mask(dev, dmamask); |
| if (err) |
| return err; |
| |
| switch (dev->dev->bus_type) { |
| #ifdef CONFIG_B43_BCMA |
| case B43_BUS_BCMA: |
| dma->translation = bcma_core_dma_translation(dev->dev->bdev); |
| break; |
| #endif |
| #ifdef CONFIG_B43_SSB |
| case B43_BUS_SSB: |
| dma->translation = ssb_dma_translation(dev->dev->sdev); |
| break; |
| #endif |
| } |
| dma->translation_in_low = b43_dma_translation_in_low_word(dev, type); |
| |
| dma->parity = true; |
| #ifdef CONFIG_B43_BCMA |
| /* TODO: find out which SSB devices need disabling parity */ |
| if (dev->dev->bus_type == B43_BUS_BCMA) |
| dma->parity = false; |
| #endif |
| |
| err = -ENOMEM; |
| /* setup TX DMA channels. */ |
| dma->tx_ring_AC_BK = b43_setup_dmaring(dev, 0, 1, type); |
| if (!dma->tx_ring_AC_BK) |
| goto out; |
| |
| dma->tx_ring_AC_BE = b43_setup_dmaring(dev, 1, 1, type); |
| if (!dma->tx_ring_AC_BE) |
| goto err_destroy_bk; |
| |
| dma->tx_ring_AC_VI = b43_setup_dmaring(dev, 2, 1, type); |
| if (!dma->tx_ring_AC_VI) |
| goto err_destroy_be; |
| |
| dma->tx_ring_AC_VO = b43_setup_dmaring(dev, 3, 1, type); |
| if (!dma->tx_ring_AC_VO) |
| goto err_destroy_vi; |
| |
| dma->tx_ring_mcast = b43_setup_dmaring(dev, 4, 1, type); |
| if (!dma->tx_ring_mcast) |
| goto err_destroy_vo; |
| |
| /* setup RX DMA channel. */ |
| dma->rx_ring = b43_setup_dmaring(dev, 0, 0, type); |
| if (!dma->rx_ring) |
| goto err_destroy_mcast; |
| |
| /* No support for the TX status DMA ring. */ |
| B43_WARN_ON(dev->dev->core_rev < 5); |
| |
| b43dbg(dev->wl, "%u-bit DMA initialized\n", |
| (unsigned int)type); |
| err = 0; |
| out: |
| return err; |
| |
| err_destroy_mcast: |
| destroy_ring(dma, tx_ring_mcast); |
| err_destroy_vo: |
| destroy_ring(dma, tx_ring_AC_VO); |
| err_destroy_vi: |
| destroy_ring(dma, tx_ring_AC_VI); |
| err_destroy_be: |
| destroy_ring(dma, tx_ring_AC_BE); |
| err_destroy_bk: |
| destroy_ring(dma, tx_ring_AC_BK); |
| return err; |
| } |
| |
| /* Generate a cookie for the TX header. */ |
| static u16 generate_cookie(struct b43_dmaring *ring, int slot) |
| { |
| u16 cookie; |
| |
| /* Use the upper 4 bits of the cookie as |
| * DMA controller ID and store the slot number |
| * in the lower 12 bits. |
| * Note that the cookie must never be 0, as this |
| * is a special value used in RX path. |
| * It can also not be 0xFFFF because that is special |
| * for multicast frames. |
| */ |
| cookie = (((u16)ring->index + 1) << 12); |
| B43_WARN_ON(slot & ~0x0FFF); |
| cookie |= (u16)slot; |
| |
| return cookie; |
| } |
| |
| /* Inspect a cookie and find out to which controller/slot it belongs. */ |
| static |
| struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot) |
| { |
| struct b43_dma *dma = &dev->dma; |
| struct b43_dmaring *ring = NULL; |
| |
| switch (cookie & 0xF000) { |
| case 0x1000: |
| ring = dma->tx_ring_AC_BK; |
| break; |
| case 0x2000: |
| ring = dma->tx_ring_AC_BE; |
| break; |
| case 0x3000: |
| ring = dma->tx_ring_AC_VI; |
| break; |
| case 0x4000: |
| ring = dma->tx_ring_AC_VO; |
| break; |
| case 0x5000: |
| ring = dma->tx_ring_mcast; |
| break; |
| } |
| *slot = (cookie & 0x0FFF); |
| if (unlikely(!ring || *slot < 0 || *slot >= ring->nr_slots)) { |
| b43dbg(dev->wl, "TX-status contains " |
| "invalid cookie: 0x%04X\n", cookie); |
| return NULL; |
| } |
| |
| return ring; |
| } |
| |
| static int dma_tx_fragment(struct b43_dmaring *ring, |
| struct sk_buff *skb) |
| { |
| const struct b43_dma_ops *ops = ring->ops; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct b43_private_tx_info *priv_info = b43_get_priv_tx_info(info); |
| u8 *header; |
| int slot, old_top_slot, old_used_slots; |
| int err; |
| struct b43_dmadesc_generic *desc; |
| struct b43_dmadesc_meta *meta; |
| struct b43_dmadesc_meta *meta_hdr; |
| u16 cookie; |
| size_t hdrsize = b43_txhdr_size(ring->dev); |
| |
| /* Important note: If the number of used DMA slots per TX frame |
| * is changed here, the TX_SLOTS_PER_FRAME definition at the top of |
| * the file has to be updated, too! |
| */ |
| |
| old_top_slot = ring->current_slot; |
| old_used_slots = ring->used_slots; |
| |
| /* Get a slot for the header. */ |
| slot = request_slot(ring); |
| desc = ops->idx2desc(ring, slot, &meta_hdr); |
| memset(meta_hdr, 0, sizeof(*meta_hdr)); |
| |
| header = &(ring->txhdr_cache[(slot / TX_SLOTS_PER_FRAME) * hdrsize]); |
| cookie = generate_cookie(ring, slot); |
| err = b43_generate_txhdr(ring->dev, header, |
| skb, info, cookie); |
| if (unlikely(err)) { |
| ring->current_slot = old_top_slot; |
| ring->used_slots = old_used_slots; |
| return err; |
| } |
| |
| meta_hdr->dmaaddr = map_descbuffer(ring, (unsigned char *)header, |
| hdrsize, 1); |
| if (b43_dma_mapping_error(ring, meta_hdr->dmaaddr, hdrsize, 1)) { |
| ring->current_slot = old_top_slot; |
| ring->used_slots = old_used_slots; |
| return -EIO; |
| } |
| ops->fill_descriptor(ring, desc, meta_hdr->dmaaddr, |
| hdrsize, 1, 0, 0); |
| |
| /* Get a slot for the payload. */ |
| slot = request_slot(ring); |
| desc = ops->idx2desc(ring, slot, &meta); |
| memset(meta, 0, sizeof(*meta)); |
| |
| meta->skb = skb; |
| meta->is_last_fragment = true; |
| priv_info->bouncebuffer = NULL; |
| |
| meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); |
| /* create a bounce buffer in zone_dma on mapping failure. */ |
| if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { |
| priv_info->bouncebuffer = kmemdup(skb->data, skb->len, |
| GFP_ATOMIC | GFP_DMA); |
| if (!priv_info->bouncebuffer) { |
| ring->current_slot = old_top_slot; |
| ring->used_slots = old_used_slots; |
| err = -ENOMEM; |
| goto out_unmap_hdr; |
| } |
| |
| meta->dmaaddr = map_descbuffer(ring, priv_info->bouncebuffer, skb->len, 1); |
| if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { |
| kfree(priv_info->bouncebuffer); |
| priv_info->bouncebuffer = NULL; |
| ring->current_slot = old_top_slot; |
| ring->used_slots = old_used_slots; |
| err = -EIO; |
| goto out_unmap_hdr; |
| } |
| } |
| |
| ops->fill_descriptor(ring, desc, meta->dmaaddr, skb->len, 0, 1, 1); |
| |
| if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { |
| /* Tell the firmware about the cookie of the last |
| * mcast frame, so it can clear the more-data bit in it. */ |
| b43_shm_write16(ring->dev, B43_SHM_SHARED, |
| B43_SHM_SH_MCASTCOOKIE, cookie); |
| } |
| /* Now transfer the whole frame. */ |
| wmb(); |
| ops->poke_tx(ring, next_slot(ring, slot)); |
| return 0; |
| |
| out_unmap_hdr: |
| unmap_descbuffer(ring, meta_hdr->dmaaddr, |
| hdrsize, 1); |
| return err; |
| } |
| |
| static inline int should_inject_overflow(struct b43_dmaring *ring) |
| { |
| #ifdef CONFIG_B43_DEBUG |
| if (unlikely(b43_debug(ring->dev, B43_DBG_DMAOVERFLOW))) { |
| /* Check if we should inject another ringbuffer overflow |
| * to test handling of this situation in the stack. */ |
| unsigned long next_overflow; |
| |
| next_overflow = ring->last_injected_overflow + HZ; |
| if (time_after(jiffies, next_overflow)) { |
| ring->last_injected_overflow = jiffies; |
| b43dbg(ring->dev->wl, |
| "Injecting TX ring overflow on " |
| "DMA controller %d\n", ring->index); |
| return 1; |
| } |
| } |
| #endif /* CONFIG_B43_DEBUG */ |
| return 0; |
| } |
| |
| /* Static mapping of mac80211's queues (priorities) to b43 DMA rings. */ |
| static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev, |
| u8 queue_prio) |
| { |
| struct b43_dmaring *ring; |
| |
| if (dev->qos_enabled) { |
| /* 0 = highest priority */ |
| switch (queue_prio) { |
| default: |
| B43_WARN_ON(1); |
| /* fallthrough */ |
| case 0: |
| ring = dev->dma.tx_ring_AC_VO; |
| break; |
| case 1: |
| ring = dev->dma.tx_ring_AC_VI; |
| break; |
| case 2: |
| ring = dev->dma.tx_ring_AC_BE; |
| break; |
| case 3: |
| ring = dev->dma.tx_ring_AC_BK; |
| break; |
| } |
| } else |
| ring = dev->dma.tx_ring_AC_BE; |
| |
| return ring; |
| } |
| |
| int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb) |
| { |
| struct b43_dmaring *ring; |
| struct ieee80211_hdr *hdr; |
| int err = 0; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { |
| /* The multicast ring will be sent after the DTIM */ |
| ring = dev->dma.tx_ring_mcast; |
| /* Set the more-data bit. Ucode will clear it on |
| * the last frame for us. */ |
| hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); |
| } else { |
| /* Decide by priority where to put this frame. */ |
| ring = select_ring_by_priority( |
| dev, skb_get_queue_mapping(skb)); |
| } |
| |
| B43_WARN_ON(!ring->tx); |
| |
| if (unlikely(ring->stopped)) { |
| /* We get here only because of a bug in mac80211. |
| * Because of a race, one packet may be queued after |
| * the queue is stopped, thus we got called when we shouldn't. |
| * For now, just refuse the transmit. */ |
| if (b43_debug(dev, B43_DBG_DMAVERBOSE)) |
| b43err(dev->wl, "Packet after queue stopped\n"); |
| err = -ENOSPC; |
| goto out; |
| } |
| |
| if (unlikely(WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME))) { |
| /* If we get here, we have a real error with the queue |
| * full, but queues not stopped. */ |
| b43err(dev->wl, "DMA queue overflow\n"); |
| err = -ENOSPC; |
| goto out; |
| } |
| |
| /* Assign the queue number to the ring (if not already done before) |
| * so TX status handling can use it. The queue to ring mapping is |
| * static, so we don't need to store it per frame. */ |
| ring->queue_prio = skb_get_queue_mapping(skb); |
| |
| err = dma_tx_fragment(ring, skb); |
| if (unlikely(err == -ENOKEY)) { |
| /* Drop this packet, as we don't have the encryption key |
| * anymore and must not transmit it unencrypted. */ |
| ieee80211_free_txskb(dev->wl->hw, skb); |
| err = 0; |
| goto out; |
| } |
| if (unlikely(err)) { |
| b43err(dev->wl, "DMA tx mapping failure\n"); |
| goto out; |
| } |
| if ((free_slots(ring) < TX_SLOTS_PER_FRAME) || |
| should_inject_overflow(ring)) { |
| /* This TX ring is full. */ |
| unsigned int skb_mapping = skb_get_queue_mapping(skb); |
| ieee80211_stop_queue(dev->wl->hw, skb_mapping); |
| dev->wl->tx_queue_stopped[skb_mapping] = 1; |
| ring->stopped = true; |
| if (b43_debug(dev, B43_DBG_DMAVERBOSE)) { |
| b43dbg(dev->wl, "Stopped TX ring %d\n", ring->index); |
| } |
| } |
| out: |
| |
| return err; |
| } |
| |
| void b43_dma_handle_txstatus(struct b43_wldev *dev, |
| const struct b43_txstatus *status) |
| { |
| const struct b43_dma_ops *ops; |
| struct b43_dmaring *ring; |
| struct b43_dmadesc_meta *meta; |
| static const struct b43_txstatus fake; /* filled with 0 */ |
| const struct b43_txstatus *txstat; |
| int slot, firstused; |
| bool frame_succeed; |
| int skip; |
| static u8 err_out1, err_out2; |
| |
| ring = parse_cookie(dev, status->cookie, &slot); |
| if (unlikely(!ring)) |
| return; |
| B43_WARN_ON(!ring->tx); |
| |
| /* Sanity check: TX packets are processed in-order on one ring. |
| * Check if the slot deduced from the cookie really is the first |
| * used slot. */ |
| firstused = ring->current_slot - ring->used_slots + 1; |
| if (firstused < 0) |
| firstused = ring->nr_slots + firstused; |
| |
| skip = 0; |
| if (unlikely(slot != firstused)) { |
| /* This possibly is a firmware bug and will result in |
| * malfunction, memory leaks and/or stall of DMA functionality. |
| */ |
| if (slot == next_slot(ring, next_slot(ring, firstused))) { |
| /* If a single header/data pair was missed, skip over |
| * the first two slots in an attempt to recover. |
| */ |
| slot = firstused; |
| skip = 2; |
| if (!err_out1) { |
| /* Report the error once. */ |
| b43dbg(dev->wl, |
| "Skip on DMA ring %d slot %d.\n", |
| ring->index, slot); |
| err_out1 = 1; |
| } |
| } else { |
| /* More than a single header/data pair were missed. |
| * Report this error once. |
| */ |
| if (!err_out2) |
| b43dbg(dev->wl, |
| "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n", |
| ring->index, firstused, slot); |
| err_out2 = 1; |
| return; |
| } |
| } |
| |
| ops = ring->ops; |
| while (1) { |
| B43_WARN_ON(slot < 0 || slot >= ring->nr_slots); |
| /* get meta - ignore returned value */ |
| ops->idx2desc(ring, slot, &meta); |
| |
| if (b43_dma_ptr_is_poisoned(meta->skb)) { |
| b43dbg(dev->wl, "Poisoned TX slot %d (first=%d) " |
| "on ring %d\n", |
| slot, firstused, ring->index); |
| break; |
| } |
| |
| if (meta->skb) { |
| struct b43_private_tx_info *priv_info = |
| b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb)); |
| |
| unmap_descbuffer(ring, meta->dmaaddr, |
| meta->skb->len, 1); |
| kfree(priv_info->bouncebuffer); |
| priv_info->bouncebuffer = NULL; |
| } else { |
| unmap_descbuffer(ring, meta->dmaaddr, |
| b43_txhdr_size(dev), 1); |
| } |
| |
| if (meta->is_last_fragment) { |
| struct ieee80211_tx_info *info; |
| |
| if (unlikely(!meta->skb)) { |
| /* This is a scatter-gather fragment of a frame, |
| * so the skb pointer must not be NULL. |
| */ |
| b43dbg(dev->wl, "TX status unexpected NULL skb " |
| "at slot %d (first=%d) on ring %d\n", |
| slot, firstused, ring->index); |
| break; |
| } |
| |
| info = IEEE80211_SKB_CB(meta->skb); |
| |
| /* |
| * Call back to inform the ieee80211 subsystem about |
| * the status of the transmission. When skipping over |
| * a missed TX status report, use a status structure |
| * filled with zeros to indicate that the frame was not |
| * sent (frame_count 0) and not acknowledged |
| */ |
| if (unlikely(skip)) |
| txstat = &fake; |
| else |
| txstat = status; |
| |
| frame_succeed = b43_fill_txstatus_report(dev, info, |
| txstat); |
| #ifdef CONFIG_B43_DEBUG |
| if (frame_succeed) |
| ring->nr_succeed_tx_packets++; |
| else |
| ring->nr_failed_tx_packets++; |
| ring->nr_total_packet_tries += status->frame_count; |
| #endif /* DEBUG */ |
| ieee80211_tx_status(dev->wl->hw, meta->skb); |
| |
| /* skb will be freed by ieee80211_tx_status(). |
| * Poison our pointer. */ |
| meta->skb = B43_DMA_PTR_POISON; |
| } else { |
| /* No need to call free_descriptor_buffer here, as |
| * this is only the txhdr, which is not allocated. |
| */ |
| if (unlikely(meta->skb)) { |
| b43dbg(dev->wl, "TX status unexpected non-NULL skb " |
| "at slot %d (first=%d) on ring %d\n", |
| slot, firstused, ring->index); |
| break; |
| } |
| } |
| |
| /* Everything unmapped and free'd. So it's not used anymore. */ |
| ring->used_slots--; |
| |
| if (meta->is_last_fragment && !skip) { |
| /* This is the last scatter-gather |
| * fragment of the frame. We are done. */ |
| break; |
| } |
| slot = next_slot(ring, slot); |
| if (skip > 0) |
| --skip; |
| } |
| if (ring->stopped) { |
| B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME); |
| ring->stopped = false; |
| } |
| |
| if (dev->wl->tx_queue_stopped[ring->queue_prio]) { |
| dev->wl->tx_queue_stopped[ring->queue_prio] = 0; |
| } else { |
| /* If the driver queue is running wake the corresponding |
| * mac80211 queue. */ |
| ieee80211_wake_queue(dev->wl->hw, ring->queue_prio); |
| if (b43_debug(dev, B43_DBG_DMAVERBOSE)) { |
| b43dbg(dev->wl, "Woke up TX ring %d\n", ring->index); |
| } |
| } |
| /* Add work to the queue. */ |
| ieee80211_queue_work(dev->wl->hw, &dev->wl->tx_work); |
| } |
| |
| static void dma_rx(struct b43_dmaring *ring, int *slot) |
| { |
| const struct b43_dma_ops *ops = ring->ops; |
| struct b43_dmadesc_generic *desc; |
| struct b43_dmadesc_meta *meta; |
| struct b43_rxhdr_fw4 *rxhdr; |
| struct sk_buff *skb; |
| u16 len; |
| int err; |
| dma_addr_t dmaaddr; |
| |
| desc = ops->idx2desc(ring, *slot, &meta); |
| |
| sync_descbuffer_for_cpu(ring, meta->dmaaddr, ring->rx_buffersize); |
| skb = meta->skb; |
| |
| rxhdr = (struct b43_rxhdr_fw4 *)skb->data; |
| len = le16_to_cpu(rxhdr->frame_len); |
| if (len == 0) { |
| int i = 0; |
| |
| do { |
| udelay(2); |
| barrier(); |
| len = le16_to_cpu(rxhdr->frame_len); |
| } while (len == 0 && i++ < 5); |
| if (unlikely(len == 0)) { |
| dmaaddr = meta->dmaaddr; |
| goto drop_recycle_buffer; |
| } |
| } |
| if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) { |
| /* Something went wrong with the DMA. |
| * The device did not touch the buffer and did not overwrite the poison. */ |
| b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n"); |
| dmaaddr = meta->dmaaddr; |
| goto drop_recycle_buffer; |
| } |
| if (unlikely(len + ring->frameoffset > ring->rx_buffersize)) { |
| /* The data did not fit into one descriptor buffer |
| * and is split over multiple buffers. |
| * This should never happen, as we try to allocate buffers |
| * big enough. So simply ignore this packet. |
| */ |
| int cnt = 0; |
| s32 tmp = len; |
| |
| while (1) { |
| desc = ops->idx2desc(ring, *slot, &meta); |
| /* recycle the descriptor buffer. */ |
| b43_poison_rx_buffer(ring, meta->skb); |
| sync_descbuffer_for_device(ring, meta->dmaaddr, |
| ring->rx_buffersize); |
| *slot = next_slot(ring, *slot); |
| cnt++; |
| tmp -= ring->rx_buffersize; |
| if (tmp <= 0) |
| break; |
| } |
| b43err(ring->dev->wl, "DMA RX buffer too small " |
| "(len: %u, buffer: %u, nr-dropped: %d)\n", |
| len, ring->rx_buffersize, cnt); |
| goto drop; |
| } |
| |
| dmaaddr = meta->dmaaddr; |
| err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC); |
| if (unlikely(err)) { |
| b43dbg(ring->dev->wl, "DMA RX: setup_rx_descbuffer() failed\n"); |
| goto drop_recycle_buffer; |
| } |
| |
| unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0); |
| skb_put(skb, len + ring->frameoffset); |
| skb_pull(skb, ring->frameoffset); |
| |
| b43_rx(ring->dev, skb, rxhdr); |
| drop: |
| return; |
| |
| drop_recycle_buffer: |
| /* Poison and recycle the RX buffer. */ |
| b43_poison_rx_buffer(ring, skb); |
| sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize); |
| } |
| |
| void b43_dma_handle_rx_overflow(struct b43_dmaring *ring) |
| { |
| int current_slot, previous_slot; |
| |
| B43_WARN_ON(ring->tx); |
| |
| /* Device has filled all buffers, drop all packets and let TCP |
| * decrease speed. |
| * Decrement RX index by one will let the device to see all slots |
| * as free again |
| */ |
| /* |
| *TODO: How to increase rx_drop in mac80211? |
| */ |
| current_slot = ring->ops->get_current_rxslot(ring); |
| previous_slot = prev_slot(ring, current_slot); |
| ring->ops->set_current_rxslot(ring, previous_slot); |
| } |
| |
| void b43_dma_rx(struct b43_dmaring *ring) |
| { |
| const struct b43_dma_ops *ops = ring->ops; |
| int slot, current_slot; |
| int used_slots = 0; |
| |
| B43_WARN_ON(ring->tx); |
| current_slot = ops->get_current_rxslot(ring); |
| B43_WARN_ON(!(current_slot >= 0 && current_slot < ring->nr_slots)); |
| |
| slot = ring->current_slot; |
| for (; slot != current_slot; slot = next_slot(ring, slot)) { |
| dma_rx(ring, &slot); |
| update_max_used_slots(ring, ++used_slots); |
| } |
| wmb(); |
| ops->set_current_rxslot(ring, slot); |
| ring->current_slot = slot; |
| } |
| |
| static void b43_dma_tx_suspend_ring(struct b43_dmaring *ring) |
| { |
| B43_WARN_ON(!ring->tx); |
| ring->ops->tx_suspend(ring); |
| } |
| |
| static void b43_dma_tx_resume_ring(struct b43_dmaring *ring) |
| { |
| B43_WARN_ON(!ring->tx); |
| ring->ops->tx_resume(ring); |
| } |
| |
| void b43_dma_tx_suspend(struct b43_wldev *dev) |
| { |
| b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); |
| b43_dma_tx_suspend_ring(dev->dma.tx_ring_AC_BK); |
| b43_dma_tx_suspend_ring(dev->dma.tx_ring_AC_BE); |
| b43_dma_tx_suspend_ring(dev->dma.tx_ring_AC_VI); |
| b43_dma_tx_suspend_ring(dev->dma.tx_ring_AC_VO); |
| b43_dma_tx_suspend_ring(dev->dma.tx_ring_mcast); |
| } |
| |
| void b43_dma_tx_resume(struct b43_wldev *dev) |
| { |
| b43_dma_tx_resume_ring(dev->dma.tx_ring_mcast); |
| b43_dma_tx_resume_ring(dev->dma.tx_ring_AC_VO); |
| b43_dma_tx_resume_ring(dev->dma.tx_ring_AC_VI); |
| b43_dma_tx_resume_ring(dev->dma.tx_ring_AC_BE); |
| b43_dma_tx_resume_ring(dev->dma.tx_ring_AC_BK); |
| b43_power_saving_ctl_bits(dev, 0); |
| } |
| |
| static void direct_fifo_rx(struct b43_wldev *dev, enum b43_dmatype type, |
| u16 mmio_base, bool enable) |
| { |
| u32 ctl; |
| |
| if (type == B43_DMA_64BIT) { |
| ctl = b43_read32(dev, mmio_base + B43_DMA64_RXCTL); |
| ctl &= ~B43_DMA64_RXDIRECTFIFO; |
| if (enable) |
| ctl |= B43_DMA64_RXDIRECTFIFO; |
| b43_write32(dev, mmio_base + B43_DMA64_RXCTL, ctl); |
| } else { |
| ctl = b43_read32(dev, mmio_base + B43_DMA32_RXCTL); |
| ctl &= ~B43_DMA32_RXDIRECTFIFO; |
| if (enable) |
| ctl |= B43_DMA32_RXDIRECTFIFO; |
| b43_write32(dev, mmio_base + B43_DMA32_RXCTL, ctl); |
| } |
| } |
| |
| /* Enable/Disable Direct FIFO Receive Mode (PIO) on a RX engine. |
| * This is called from PIO code, so DMA structures are not available. */ |
| void b43_dma_direct_fifo_rx(struct b43_wldev *dev, |
| unsigned int engine_index, bool enable) |
| { |
| enum b43_dmatype type; |
| u16 mmio_base; |
| |
| type = dma_mask_to_engine_type(supported_dma_mask(dev)); |
| |
| mmio_base = b43_dmacontroller_base(type, engine_index); |
| direct_fifo_rx(dev, type, mmio_base, enable); |
| } |