| /* |
| * linux/arch/alpha/kernel/sys_sable.c |
| * |
| * Copyright (C) 1995 David A Rusling |
| * Copyright (C) 1996 Jay A Estabrook |
| * Copyright (C) 1998, 1999 Richard Henderson |
| * |
| * Code supporting the Sable, Sable-Gamma, and Lynx systems. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/dma.h> |
| #include <asm/irq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/core_t2.h> |
| #include <asm/tlbflush.h> |
| |
| #include "proto.h" |
| #include "irq_impl.h" |
| #include "pci_impl.h" |
| #include "machvec_impl.h" |
| |
| DEFINE_SPINLOCK(sable_lynx_irq_lock); |
| |
| typedef struct irq_swizzle_struct |
| { |
| char irq_to_mask[64]; |
| char mask_to_irq[64]; |
| |
| /* Note mask bit is true for DISABLED irqs. */ |
| unsigned long shadow_mask; |
| |
| void (*update_irq_hw)(unsigned long bit, unsigned long mask); |
| void (*ack_irq_hw)(unsigned long bit); |
| |
| } irq_swizzle_t; |
| |
| static irq_swizzle_t *sable_lynx_irq_swizzle; |
| |
| static void sable_lynx_init_irq(int nr_of_irqs); |
| |
| #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) |
| |
| /***********************************************************************/ |
| /* |
| * For SABLE, which is really baroque, we manage 40 IRQ's, but the |
| * hardware really only supports 24, not via normal ISA PIC, |
| * but cascaded custom 8259's, etc. |
| * 0-7 (char at 536) |
| * 8-15 (char at 53a) |
| * 16-23 (char at 53c) |
| * |
| * Summary Registers (536/53a/53c): |
| * |
| * Bit Meaning Kernel IRQ |
| *------------------------------------------ |
| * 0 PCI slot 0 34 |
| * 1 NCR810 (builtin) 33 |
| * 2 TULIP (builtin) 32 |
| * 3 mouse 12 |
| * 4 PCI slot 1 35 |
| * 5 PCI slot 2 36 |
| * 6 keyboard 1 |
| * 7 floppy 6 |
| * 8 COM2 3 |
| * 9 parallel port 7 |
| *10 EISA irq 3 - |
| *11 EISA irq 4 - |
| *12 EISA irq 5 5 |
| *13 EISA irq 6 - |
| *14 EISA irq 7 - |
| *15 COM1 4 |
| *16 EISA irq 9 9 |
| *17 EISA irq 10 10 |
| *18 EISA irq 11 11 |
| *19 EISA irq 12 - |
| *20 EISA irq 13 - |
| *21 EISA irq 14 14 |
| *22 NC 15 |
| *23 IIC - |
| */ |
| |
| static void |
| sable_update_irq_hw(unsigned long bit, unsigned long mask) |
| { |
| int port = 0x537; |
| |
| if (bit >= 16) { |
| port = 0x53d; |
| mask >>= 16; |
| } else if (bit >= 8) { |
| port = 0x53b; |
| mask >>= 8; |
| } |
| |
| outb(mask, port); |
| } |
| |
| static void |
| sable_ack_irq_hw(unsigned long bit) |
| { |
| int port, val1, val2; |
| |
| if (bit >= 16) { |
| port = 0x53c; |
| val1 = 0xE0 | (bit - 16); |
| val2 = 0xE0 | 4; |
| } else if (bit >= 8) { |
| port = 0x53a; |
| val1 = 0xE0 | (bit - 8); |
| val2 = 0xE0 | 3; |
| } else { |
| port = 0x536; |
| val1 = 0xE0 | (bit - 0); |
| val2 = 0xE0 | 1; |
| } |
| |
| outb(val1, port); /* ack the slave */ |
| outb(val2, 0x534); /* ack the master */ |
| } |
| |
| static irq_swizzle_t sable_irq_swizzle = { |
| { |
| -1, 6, -1, 8, 15, 12, 7, 9, /* pseudo PIC 0-7 */ |
| -1, 16, 17, 18, 3, -1, 21, 22, /* pseudo PIC 8-15 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* pseudo EISA 0-7 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* pseudo EISA 8-15 */ |
| 2, 1, 0, 4, 5, -1, -1, -1, /* pseudo PCI */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* */ |
| -1, -1, -1, -1, -1, -1, -1, -1 /* */ |
| }, |
| { |
| 34, 33, 32, 12, 35, 36, 1, 6, /* mask 0-7 */ |
| 3, 7, -1, -1, 5, -1, -1, 4, /* mask 8-15 */ |
| 9, 10, 11, -1, -1, 14, 15, -1, /* mask 16-23 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* */ |
| -1, -1, -1, -1, -1, -1, -1, -1 /* */ |
| }, |
| -1, |
| sable_update_irq_hw, |
| sable_ack_irq_hw |
| }; |
| |
| static void __init |
| sable_init_irq(void) |
| { |
| outb(-1, 0x537); /* slave 0 */ |
| outb(-1, 0x53b); /* slave 1 */ |
| outb(-1, 0x53d); /* slave 2 */ |
| outb(0x44, 0x535); /* enable cascades in master */ |
| |
| sable_lynx_irq_swizzle = &sable_irq_swizzle; |
| sable_lynx_init_irq(40); |
| } |
| |
| /* |
| * PCI Fixup configuration for ALPHA SABLE (2100). |
| * |
| * The device to slot mapping looks like: |
| * |
| * Slot Device |
| * 0 TULIP |
| * 1 SCSI |
| * 2 PCI-EISA bridge |
| * 3 none |
| * 4 none |
| * 5 none |
| * 6 PCI on board slot 0 |
| * 7 PCI on board slot 1 |
| * 8 PCI on board slot 2 |
| * |
| * |
| * This two layered interrupt approach means that we allocate IRQ 16 and |
| * above for PCI interrupts. The IRQ relates to which bit the interrupt |
| * comes in on. This makes interrupt processing much easier. |
| */ |
| /* |
| * NOTE: the IRQ assignments below are arbitrary, but need to be consistent |
| * with the values in the irq swizzling tables above. |
| */ |
| |
| static int __init |
| sable_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| static char irq_tab[9][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { 32+0, 32+0, 32+0, 32+0, 32+0}, /* IdSel 0, TULIP */ |
| { 32+1, 32+1, 32+1, 32+1, 32+1}, /* IdSel 1, SCSI */ |
| { -1, -1, -1, -1, -1}, /* IdSel 2, SIO */ |
| { -1, -1, -1, -1, -1}, /* IdSel 3, none */ |
| { -1, -1, -1, -1, -1}, /* IdSel 4, none */ |
| { -1, -1, -1, -1, -1}, /* IdSel 5, none */ |
| { 32+2, 32+2, 32+2, 32+2, 32+2}, /* IdSel 6, slot 0 */ |
| { 32+3, 32+3, 32+3, 32+3, 32+3}, /* IdSel 7, slot 1 */ |
| { 32+4, 32+4, 32+4, 32+4, 32+4} /* IdSel 8, slot 2 */ |
| }; |
| long min_idsel = 0, max_idsel = 8, irqs_per_slot = 5; |
| return COMMON_TABLE_LOOKUP; |
| } |
| #endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */ |
| |
| #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) |
| |
| /***********************************************************************/ |
| /* LYNX hardware specifics |
| */ |
| /* |
| * For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC. |
| * |
| * Bit Meaning Kernel IRQ |
| *------------------------------------------ |
| * 0 |
| * 1 |
| * 2 |
| * 3 mouse 12 |
| * 4 |
| * 5 |
| * 6 keyboard 1 |
| * 7 floppy 6 |
| * 8 COM2 3 |
| * 9 parallel port 7 |
| *10 EISA irq 3 - |
| *11 EISA irq 4 - |
| *12 EISA irq 5 5 |
| *13 EISA irq 6 - |
| *14 EISA irq 7 - |
| *15 COM1 4 |
| *16 EISA irq 9 9 |
| *17 EISA irq 10 10 |
| *18 EISA irq 11 11 |
| *19 EISA irq 12 - |
| *20 |
| *21 EISA irq 14 14 |
| *22 EISA irq 15 15 |
| *23 IIC - |
| *24 VGA (builtin) - |
| *25 |
| *26 |
| *27 |
| *28 NCR810 (builtin) 28 |
| *29 |
| *30 |
| *31 |
| *32 PCI 0 slot 4 A primary bus 32 |
| *33 PCI 0 slot 4 B primary bus 33 |
| *34 PCI 0 slot 4 C primary bus 34 |
| *35 PCI 0 slot 4 D primary bus |
| *36 PCI 0 slot 5 A primary bus |
| *37 PCI 0 slot 5 B primary bus |
| *38 PCI 0 slot 5 C primary bus |
| *39 PCI 0 slot 5 D primary bus |
| *40 PCI 0 slot 6 A primary bus |
| *41 PCI 0 slot 6 B primary bus |
| *42 PCI 0 slot 6 C primary bus |
| *43 PCI 0 slot 6 D primary bus |
| *44 PCI 0 slot 7 A primary bus |
| *45 PCI 0 slot 7 B primary bus |
| *46 PCI 0 slot 7 C primary bus |
| *47 PCI 0 slot 7 D primary bus |
| *48 PCI 0 slot 0 A secondary bus |
| *49 PCI 0 slot 0 B secondary bus |
| *50 PCI 0 slot 0 C secondary bus |
| *51 PCI 0 slot 0 D secondary bus |
| *52 PCI 0 slot 1 A secondary bus |
| *53 PCI 0 slot 1 B secondary bus |
| *54 PCI 0 slot 1 C secondary bus |
| *55 PCI 0 slot 1 D secondary bus |
| *56 PCI 0 slot 2 A secondary bus |
| *57 PCI 0 slot 2 B secondary bus |
| *58 PCI 0 slot 2 C secondary bus |
| *59 PCI 0 slot 2 D secondary bus |
| *60 PCI 0 slot 3 A secondary bus |
| *61 PCI 0 slot 3 B secondary bus |
| *62 PCI 0 slot 3 C secondary bus |
| *63 PCI 0 slot 3 D secondary bus |
| */ |
| |
| static void |
| lynx_update_irq_hw(unsigned long bit, unsigned long mask) |
| { |
| /* |
| * Write the AIR register on the T3/T4 with the |
| * address of the IC mask register (offset 0x40) |
| */ |
| *(vulp)T2_AIR = 0x40; |
| mb(); |
| *(vulp)T2_AIR; /* re-read to force write */ |
| mb(); |
| *(vulp)T2_DIR = mask; |
| mb(); |
| mb(); |
| } |
| |
| static void |
| lynx_ack_irq_hw(unsigned long bit) |
| { |
| *(vulp)T2_VAR = (u_long) bit; |
| mb(); |
| mb(); |
| } |
| |
| static irq_swizzle_t lynx_irq_swizzle = { |
| { /* irq_to_mask */ |
| -1, 6, -1, 8, 15, 12, 7, 9, /* pseudo PIC 0-7 */ |
| -1, 16, 17, 18, 3, -1, 21, 22, /* pseudo PIC 8-15 */ |
| -1, -1, -1, -1, -1, -1, -1, -1, /* pseudo */ |
| -1, -1, -1, -1, 28, -1, -1, -1, /* pseudo */ |
| 32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */ |
| 40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */ |
| 48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */ |
| 56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */ |
| }, |
| { /* mask_to_irq */ |
| -1, -1, -1, 12, -1, -1, 1, 6, /* mask 0-7 */ |
| 3, 7, -1, -1, 5, -1, -1, 4, /* mask 8-15 */ |
| 9, 10, 11, -1, -1, 14, 15, -1, /* mask 16-23 */ |
| -1, -1, -1, -1, 28, -1, -1, -1, /* mask 24-31 */ |
| 32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */ |
| 40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */ |
| 48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */ |
| 56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */ |
| }, |
| -1, |
| lynx_update_irq_hw, |
| lynx_ack_irq_hw |
| }; |
| |
| static void __init |
| lynx_init_irq(void) |
| { |
| sable_lynx_irq_swizzle = &lynx_irq_swizzle; |
| sable_lynx_init_irq(64); |
| } |
| |
| /* |
| * PCI Fixup configuration for ALPHA LYNX (2100A) |
| * |
| * The device to slot mapping looks like: |
| * |
| * Slot Device |
| * 0 none |
| * 1 none |
| * 2 PCI-EISA bridge |
| * 3 PCI-PCI bridge |
| * 4 NCR 810 (Demi-Lynx only) |
| * 5 none |
| * 6 PCI on board slot 4 |
| * 7 PCI on board slot 5 |
| * 8 PCI on board slot 6 |
| * 9 PCI on board slot 7 |
| * |
| * And behind the PPB we have: |
| * |
| * 11 PCI on board slot 0 |
| * 12 PCI on board slot 1 |
| * 13 PCI on board slot 2 |
| * 14 PCI on board slot 3 |
| */ |
| /* |
| * NOTE: the IRQ assignments below are arbitrary, but need to be consistent |
| * with the values in the irq swizzling tables above. |
| */ |
| |
| static int __init |
| lynx_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| static char irq_tab[19][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { -1, -1, -1, -1, -1}, /* IdSel 13, PCEB */ |
| { -1, -1, -1, -1, -1}, /* IdSel 14, PPB */ |
| { 28, 28, 28, 28, 28}, /* IdSel 15, NCR demi */ |
| { -1, -1, -1, -1, -1}, /* IdSel 16, none */ |
| { 32, 32, 33, 34, 35}, /* IdSel 17, slot 4 */ |
| { 36, 36, 37, 38, 39}, /* IdSel 18, slot 5 */ |
| { 40, 40, 41, 42, 43}, /* IdSel 19, slot 6 */ |
| { 44, 44, 45, 46, 47}, /* IdSel 20, slot 7 */ |
| { -1, -1, -1, -1, -1}, /* IdSel 22, none */ |
| /* The following are actually behind the PPB. */ |
| { -1, -1, -1, -1, -1}, /* IdSel 16 none */ |
| { 28, 28, 28, 28, 28}, /* IdSel 17 NCR lynx */ |
| { -1, -1, -1, -1, -1}, /* IdSel 18 none */ |
| { -1, -1, -1, -1, -1}, /* IdSel 19 none */ |
| { -1, -1, -1, -1, -1}, /* IdSel 20 none */ |
| { -1, -1, -1, -1, -1}, /* IdSel 21 none */ |
| { 48, 48, 49, 50, 51}, /* IdSel 22 slot 0 */ |
| { 52, 52, 53, 54, 55}, /* IdSel 23 slot 1 */ |
| { 56, 56, 57, 58, 59}, /* IdSel 24 slot 2 */ |
| { 60, 60, 61, 62, 63} /* IdSel 25 slot 3 */ |
| }; |
| const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5; |
| return COMMON_TABLE_LOOKUP; |
| } |
| |
| static u8 __init |
| lynx_swizzle(struct pci_dev *dev, u8 *pinp) |
| { |
| int slot, pin = *pinp; |
| |
| if (dev->bus->number == 0) { |
| slot = PCI_SLOT(dev->devfn); |
| } |
| /* Check for the built-in bridge */ |
| else if (PCI_SLOT(dev->bus->self->devfn) == 3) { |
| slot = PCI_SLOT(dev->devfn) + 11; |
| } |
| else |
| { |
| /* Must be a card-based bridge. */ |
| do { |
| if (PCI_SLOT(dev->bus->self->devfn) == 3) { |
| slot = PCI_SLOT(dev->devfn) + 11; |
| break; |
| } |
| pin = pci_swizzle_interrupt_pin(dev, pin); |
| |
| /* Move up the chain of bridges. */ |
| dev = dev->bus->self; |
| /* Slot of the next bridge. */ |
| slot = PCI_SLOT(dev->devfn); |
| } while (dev->bus->self); |
| } |
| *pinp = pin; |
| return slot; |
| } |
| |
| #endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */ |
| |
| /***********************************************************************/ |
| /* GENERIC irq routines */ |
| |
| static inline void |
| sable_lynx_enable_irq(unsigned int irq) |
| { |
| unsigned long bit, mask; |
| |
| bit = sable_lynx_irq_swizzle->irq_to_mask[irq]; |
| spin_lock(&sable_lynx_irq_lock); |
| mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit); |
| sable_lynx_irq_swizzle->update_irq_hw(bit, mask); |
| spin_unlock(&sable_lynx_irq_lock); |
| #if 0 |
| printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n", |
| __func__, mask, bit, irq); |
| #endif |
| } |
| |
| static void |
| sable_lynx_disable_irq(unsigned int irq) |
| { |
| unsigned long bit, mask; |
| |
| bit = sable_lynx_irq_swizzle->irq_to_mask[irq]; |
| spin_lock(&sable_lynx_irq_lock); |
| mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit; |
| sable_lynx_irq_swizzle->update_irq_hw(bit, mask); |
| spin_unlock(&sable_lynx_irq_lock); |
| #if 0 |
| printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n", |
| __func__, mask, bit, irq); |
| #endif |
| } |
| |
| static unsigned int |
| sable_lynx_startup_irq(unsigned int irq) |
| { |
| sable_lynx_enable_irq(irq); |
| return 0; |
| } |
| |
| static void |
| sable_lynx_end_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| sable_lynx_enable_irq(irq); |
| } |
| |
| static void |
| sable_lynx_mask_and_ack_irq(unsigned int irq) |
| { |
| unsigned long bit, mask; |
| |
| bit = sable_lynx_irq_swizzle->irq_to_mask[irq]; |
| spin_lock(&sable_lynx_irq_lock); |
| mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit; |
| sable_lynx_irq_swizzle->update_irq_hw(bit, mask); |
| sable_lynx_irq_swizzle->ack_irq_hw(bit); |
| spin_unlock(&sable_lynx_irq_lock); |
| } |
| |
| static struct irq_chip sable_lynx_irq_type = { |
| .typename = "SABLE/LYNX", |
| .startup = sable_lynx_startup_irq, |
| .shutdown = sable_lynx_disable_irq, |
| .enable = sable_lynx_enable_irq, |
| .disable = sable_lynx_disable_irq, |
| .ack = sable_lynx_mask_and_ack_irq, |
| .end = sable_lynx_end_irq, |
| }; |
| |
| static void |
| sable_lynx_srm_device_interrupt(unsigned long vector) |
| { |
| /* Note that the vector reported by the SRM PALcode corresponds |
| to the interrupt mask bits, but we have to manage via the |
| so-called legacy IRQs for many common devices. */ |
| |
| int bit, irq; |
| |
| bit = (vector - 0x800) >> 4; |
| irq = sable_lynx_irq_swizzle->mask_to_irq[bit]; |
| #if 0 |
| printk("%s: vector 0x%lx bit 0x%x irq 0x%x\n", |
| __func__, vector, bit, irq); |
| #endif |
| handle_irq(irq); |
| } |
| |
| static void __init |
| sable_lynx_init_irq(int nr_of_irqs) |
| { |
| long i; |
| |
| for (i = 0; i < nr_of_irqs; ++i) { |
| irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL; |
| irq_desc[i].chip = &sable_lynx_irq_type; |
| } |
| |
| common_init_isa_dma(); |
| } |
| |
| static void __init |
| sable_lynx_init_pci(void) |
| { |
| common_init_pci(); |
| } |
| |
| /*****************************************************************/ |
| /* |
| * The System Vectors |
| * |
| * In order that T2_HAE_ADDRESS should be a constant, we play |
| * these games with GAMMA_BIAS. |
| */ |
| |
| #if defined(CONFIG_ALPHA_GENERIC) || \ |
| (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA)) |
| #undef GAMMA_BIAS |
| #define GAMMA_BIAS 0 |
| struct alpha_machine_vector sable_mv __initmv = { |
| .vector_name = "Sable", |
| DO_EV4_MMU, |
| DO_DEFAULT_RTC, |
| DO_T2_IO, |
| .machine_check = t2_machine_check, |
| .max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = EISA_DEFAULT_IO_BASE, |
| .min_mem_address = T2_DEFAULT_MEM_BASE, |
| |
| .nr_irqs = 40, |
| .device_interrupt = sable_lynx_srm_device_interrupt, |
| |
| .init_arch = t2_init_arch, |
| .init_irq = sable_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = sable_lynx_init_pci, |
| .kill_arch = t2_kill_arch, |
| .pci_map_irq = sable_map_irq, |
| .pci_swizzle = common_swizzle, |
| |
| .sys = { .t2 = { |
| .gamma_bias = 0 |
| } } |
| }; |
| ALIAS_MV(sable) |
| #endif /* GENERIC || (SABLE && !GAMMA) */ |
| |
| #if defined(CONFIG_ALPHA_GENERIC) || \ |
| (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA)) |
| #undef GAMMA_BIAS |
| #define GAMMA_BIAS _GAMMA_BIAS |
| struct alpha_machine_vector sable_gamma_mv __initmv = { |
| .vector_name = "Sable-Gamma", |
| DO_EV5_MMU, |
| DO_DEFAULT_RTC, |
| DO_T2_IO, |
| .machine_check = t2_machine_check, |
| .max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = EISA_DEFAULT_IO_BASE, |
| .min_mem_address = T2_DEFAULT_MEM_BASE, |
| |
| .nr_irqs = 40, |
| .device_interrupt = sable_lynx_srm_device_interrupt, |
| |
| .init_arch = t2_init_arch, |
| .init_irq = sable_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = sable_lynx_init_pci, |
| .kill_arch = t2_kill_arch, |
| .pci_map_irq = sable_map_irq, |
| .pci_swizzle = common_swizzle, |
| |
| .sys = { .t2 = { |
| .gamma_bias = _GAMMA_BIAS |
| } } |
| }; |
| ALIAS_MV(sable_gamma) |
| #endif /* GENERIC || (SABLE && GAMMA) */ |
| |
| #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) |
| #undef GAMMA_BIAS |
| #define GAMMA_BIAS _GAMMA_BIAS |
| struct alpha_machine_vector lynx_mv __initmv = { |
| .vector_name = "Lynx", |
| DO_EV4_MMU, |
| DO_DEFAULT_RTC, |
| DO_T2_IO, |
| .machine_check = t2_machine_check, |
| .max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = EISA_DEFAULT_IO_BASE, |
| .min_mem_address = T2_DEFAULT_MEM_BASE, |
| |
| .nr_irqs = 64, |
| .device_interrupt = sable_lynx_srm_device_interrupt, |
| |
| .init_arch = t2_init_arch, |
| .init_irq = lynx_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = sable_lynx_init_pci, |
| .kill_arch = t2_kill_arch, |
| .pci_map_irq = lynx_map_irq, |
| .pci_swizzle = lynx_swizzle, |
| |
| .sys = { .t2 = { |
| .gamma_bias = _GAMMA_BIAS |
| } } |
| }; |
| ALIAS_MV(lynx) |
| #endif /* GENERIC || LYNX */ |
