| /* |
| * arch/arm/mach-kirkwood/common.c |
| * |
| * Core functions for Marvell Kirkwood SoCs |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_8250.h> |
| #include <linux/ata_platform.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk-provider.h> |
| #include <linux/spinlock.h> |
| #include <linux/mv643xx_i2c.h> |
| #include <linux/timex.h> |
| #include <linux/kexec.h> |
| #include <linux/reboot.h> |
| #include <net/dsa.h> |
| #include <asm/page.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| #include <asm/hardware/cache-feroceon-l2.h> |
| #include <mach/kirkwood.h> |
| #include <mach/bridge-regs.h> |
| #include <linux/platform_data/asoc-kirkwood.h> |
| #include <linux/platform_data/mmc-mvsdio.h> |
| #include <linux/platform_data/mtd-orion_nand.h> |
| #include <linux/platform_data/usb-ehci-orion.h> |
| #include <plat/common.h> |
| #include <plat/time.h> |
| #include <linux/platform_data/dma-mv_xor.h> |
| #include "common.h" |
| #include "pm.h" |
| |
| /* These can go away once Kirkwood uses the mvebu-mbus DT binding */ |
| #define KIRKWOOD_MBUS_NAND_TARGET 0x01 |
| #define KIRKWOOD_MBUS_NAND_ATTR 0x2f |
| #define KIRKWOOD_MBUS_SRAM_TARGET 0x03 |
| #define KIRKWOOD_MBUS_SRAM_ATTR 0x01 |
| |
| /***************************************************************************** |
| * I/O Address Mapping |
| ****************************************************************************/ |
| static struct map_desc kirkwood_io_desc[] __initdata = { |
| { |
| .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, |
| .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), |
| .length = KIRKWOOD_REGS_SIZE, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| void __init kirkwood_map_io(void) |
| { |
| iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); |
| } |
| |
| /***************************************************************************** |
| * CLK tree |
| ****************************************************************************/ |
| |
| static void enable_sata0(void) |
| { |
| /* Enable PLL and IVREF */ |
| writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2); |
| /* Enable PHY */ |
| writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL); |
| } |
| |
| static void disable_sata0(void) |
| { |
| /* Disable PLL and IVREF */ |
| writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); |
| /* Disable PHY */ |
| writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); |
| } |
| |
| static void enable_sata1(void) |
| { |
| /* Enable PLL and IVREF */ |
| writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2); |
| /* Enable PHY */ |
| writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL); |
| } |
| |
| static void disable_sata1(void) |
| { |
| /* Disable PLL and IVREF */ |
| writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); |
| /* Disable PHY */ |
| writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); |
| } |
| |
| static void disable_pcie0(void) |
| { |
| writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); |
| while (1) |
| if (readl(PCIE_STATUS) & 0x1) |
| break; |
| writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); |
| } |
| |
| static void disable_pcie1(void) |
| { |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| |
| if (dev == MV88F6282_DEV_ID) { |
| writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL); |
| while (1) |
| if (readl(PCIE1_STATUS) & 0x1) |
| break; |
| writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL); |
| } |
| } |
| |
| /* An extended version of the gated clk. This calls fn_en()/fn_dis |
| * before enabling/disabling the clock. We use this to turn on/off |
| * PHYs etc. */ |
| struct clk_gate_fn { |
| struct clk_gate gate; |
| void (*fn_en)(void); |
| void (*fn_dis)(void); |
| }; |
| |
| #define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate) |
| #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) |
| |
| static int clk_gate_fn_enable(struct clk_hw *hw) |
| { |
| struct clk_gate *gate = to_clk_gate(hw); |
| struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); |
| int ret; |
| |
| ret = clk_gate_ops.enable(hw); |
| if (!ret && gate_fn->fn_en) |
| gate_fn->fn_en(); |
| |
| return ret; |
| } |
| |
| static void clk_gate_fn_disable(struct clk_hw *hw) |
| { |
| struct clk_gate *gate = to_clk_gate(hw); |
| struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); |
| |
| if (gate_fn->fn_dis) |
| gate_fn->fn_dis(); |
| |
| clk_gate_ops.disable(hw); |
| } |
| |
| static struct clk_ops clk_gate_fn_ops; |
| |
| static struct clk __init *clk_register_gate_fn(struct device *dev, |
| const char *name, |
| const char *parent_name, unsigned long flags, |
| void __iomem *reg, u8 bit_idx, |
| u8 clk_gate_flags, spinlock_t *lock, |
| void (*fn_en)(void), void (*fn_dis)(void)) |
| { |
| struct clk_gate_fn *gate_fn; |
| struct clk *clk; |
| struct clk_init_data init; |
| |
| gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL); |
| if (!gate_fn) { |
| pr_err("%s: could not allocate gated clk\n", __func__); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| init.name = name; |
| init.ops = &clk_gate_fn_ops; |
| init.flags = flags; |
| init.parent_names = (parent_name ? &parent_name : NULL); |
| init.num_parents = (parent_name ? 1 : 0); |
| |
| /* struct clk_gate assignments */ |
| gate_fn->gate.reg = reg; |
| gate_fn->gate.bit_idx = bit_idx; |
| gate_fn->gate.flags = clk_gate_flags; |
| gate_fn->gate.lock = lock; |
| gate_fn->gate.hw.init = &init; |
| gate_fn->fn_en = fn_en; |
| gate_fn->fn_dis = fn_dis; |
| |
| /* ops is the gate ops, but with our enable/disable functions */ |
| if (clk_gate_fn_ops.enable != clk_gate_fn_enable || |
| clk_gate_fn_ops.disable != clk_gate_fn_disable) { |
| clk_gate_fn_ops = clk_gate_ops; |
| clk_gate_fn_ops.enable = clk_gate_fn_enable; |
| clk_gate_fn_ops.disable = clk_gate_fn_disable; |
| } |
| |
| clk = clk_register(dev, &gate_fn->gate.hw); |
| |
| if (IS_ERR(clk)) |
| kfree(gate_fn); |
| |
| return clk; |
| } |
| |
| static DEFINE_SPINLOCK(gating_lock); |
| static struct clk *tclk; |
| |
| static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) |
| { |
| return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, |
| bit_idx, 0, &gating_lock); |
| } |
| |
| static struct clk __init *kirkwood_register_gate_fn(const char *name, |
| u8 bit_idx, |
| void (*fn_en)(void), |
| void (*fn_dis)(void)) |
| { |
| return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, |
| bit_idx, 0, &gating_lock, fn_en, fn_dis); |
| } |
| |
| static struct clk *ge0, *ge1; |
| |
| void __init kirkwood_clk_init(void) |
| { |
| struct clk *runit, *sata0, *sata1, *usb0, *sdio; |
| struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; |
| |
| tclk = clk_register_fixed_rate(NULL, "tclk", NULL, |
| CLK_IS_ROOT, kirkwood_tclk); |
| |
| runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT); |
| ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0); |
| ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1); |
| sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0, |
| enable_sata0, disable_sata0); |
| sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1, |
| enable_sata1, disable_sata1); |
| usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0); |
| sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO); |
| crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO); |
| xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0); |
| xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1); |
| pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0, |
| NULL, disable_pcie0); |
| pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1, |
| NULL, disable_pcie1); |
| audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO); |
| kirkwood_register_gate("tdm", CGC_BIT_TDM); |
| kirkwood_register_gate("tsu", CGC_BIT_TSU); |
| |
| /* clkdev entries, mapping clks to devices */ |
| orion_clkdev_add(NULL, "orion_spi.0", runit); |
| orion_clkdev_add(NULL, "orion_spi.1", runit); |
| orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0); |
| orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1); |
| orion_clkdev_add(NULL, "orion_wdt", tclk); |
| orion_clkdev_add("0", "sata_mv.0", sata0); |
| orion_clkdev_add("1", "sata_mv.0", sata1); |
| orion_clkdev_add(NULL, "orion-ehci.0", usb0); |
| orion_clkdev_add(NULL, "orion_nand", runit); |
| orion_clkdev_add(NULL, "mvsdio", sdio); |
| orion_clkdev_add(NULL, "mv_crypto", crypto); |
| orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0); |
| orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1); |
| orion_clkdev_add("0", "pcie", pex0); |
| orion_clkdev_add("1", "pcie", pex1); |
| orion_clkdev_add(NULL, "mvebu-audio", audio); |
| orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); |
| orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); |
| |
| /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., |
| * so should never be gated. |
| */ |
| clk_prepare_enable(runit); |
| } |
| |
| /***************************************************************************** |
| * EHCI0 |
| ****************************************************************************/ |
| void __init kirkwood_ehci_init(void) |
| { |
| orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); |
| } |
| |
| |
| /***************************************************************************** |
| * GE00 |
| ****************************************************************************/ |
| void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) |
| { |
| orion_ge00_init(eth_data, |
| GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, |
| IRQ_KIRKWOOD_GE00_ERR, 1600); |
| /* The interface forgets the MAC address assigned by u-boot if |
| the clock is turned off, so claim the clk now. */ |
| clk_prepare_enable(ge0); |
| } |
| |
| |
| /***************************************************************************** |
| * GE01 |
| ****************************************************************************/ |
| void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) |
| { |
| orion_ge01_init(eth_data, |
| GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, |
| IRQ_KIRKWOOD_GE01_ERR, 1600); |
| clk_prepare_enable(ge1); |
| } |
| |
| |
| /***************************************************************************** |
| * Ethernet switch |
| ****************************************************************************/ |
| void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) |
| { |
| orion_ge00_switch_init(d, irq); |
| } |
| |
| |
| /***************************************************************************** |
| * NAND flash |
| ****************************************************************************/ |
| static struct resource kirkwood_nand_resource = { |
| .flags = IORESOURCE_MEM, |
| .start = KIRKWOOD_NAND_MEM_PHYS_BASE, |
| .end = KIRKWOOD_NAND_MEM_PHYS_BASE + |
| KIRKWOOD_NAND_MEM_SIZE - 1, |
| }; |
| |
| static struct orion_nand_data kirkwood_nand_data = { |
| .cle = 0, |
| .ale = 1, |
| .width = 8, |
| }; |
| |
| static struct platform_device kirkwood_nand_flash = { |
| .name = "orion_nand", |
| .id = -1, |
| .dev = { |
| .platform_data = &kirkwood_nand_data, |
| }, |
| .resource = &kirkwood_nand_resource, |
| .num_resources = 1, |
| }; |
| |
| void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, |
| int chip_delay) |
| { |
| kirkwood_nand_data.parts = parts; |
| kirkwood_nand_data.nr_parts = nr_parts; |
| kirkwood_nand_data.chip_delay = chip_delay; |
| platform_device_register(&kirkwood_nand_flash); |
| } |
| |
| void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, |
| int (*dev_ready)(struct mtd_info *)) |
| { |
| kirkwood_nand_data.parts = parts; |
| kirkwood_nand_data.nr_parts = nr_parts; |
| kirkwood_nand_data.dev_ready = dev_ready; |
| platform_device_register(&kirkwood_nand_flash); |
| } |
| |
| /***************************************************************************** |
| * SoC RTC |
| ****************************************************************************/ |
| static void __init kirkwood_rtc_init(void) |
| { |
| orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC); |
| } |
| |
| |
| /***************************************************************************** |
| * SATA |
| ****************************************************************************/ |
| void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) |
| { |
| orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); |
| } |
| |
| |
| /***************************************************************************** |
| * SD/SDIO/MMC |
| ****************************************************************************/ |
| static struct resource mvsdio_resources[] = { |
| [0] = { |
| .start = SDIO_PHYS_BASE, |
| .end = SDIO_PHYS_BASE + SZ_1K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_KIRKWOOD_SDIO, |
| .end = IRQ_KIRKWOOD_SDIO, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 mvsdio_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device kirkwood_sdio = { |
| .name = "mvsdio", |
| .id = -1, |
| .dev = { |
| .dma_mask = &mvsdio_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .num_resources = ARRAY_SIZE(mvsdio_resources), |
| .resource = mvsdio_resources, |
| }; |
| |
| void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) |
| { |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */ |
| mvsdio_data->clock = 100000000; |
| else |
| mvsdio_data->clock = 200000000; |
| kirkwood_sdio.dev.platform_data = mvsdio_data; |
| platform_device_register(&kirkwood_sdio); |
| } |
| |
| |
| /***************************************************************************** |
| * SPI |
| ****************************************************************************/ |
| void __init kirkwood_spi_init(void) |
| { |
| orion_spi_init(SPI_PHYS_BASE); |
| } |
| |
| |
| /***************************************************************************** |
| * I2C |
| ****************************************************************************/ |
| void __init kirkwood_i2c_init(void) |
| { |
| orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8); |
| } |
| |
| |
| /***************************************************************************** |
| * UART0 |
| ****************************************************************************/ |
| |
| void __init kirkwood_uart0_init(void) |
| { |
| orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, |
| IRQ_KIRKWOOD_UART_0, tclk); |
| } |
| |
| |
| /***************************************************************************** |
| * UART1 |
| ****************************************************************************/ |
| void __init kirkwood_uart1_init(void) |
| { |
| orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, |
| IRQ_KIRKWOOD_UART_1, tclk); |
| } |
| |
| /***************************************************************************** |
| * Cryptographic Engines and Security Accelerator (CESA) |
| ****************************************************************************/ |
| void __init kirkwood_crypto_init(void) |
| { |
| orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE, |
| KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO); |
| } |
| |
| |
| /***************************************************************************** |
| * XOR0 |
| ****************************************************************************/ |
| void __init kirkwood_xor0_init(void) |
| { |
| orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, |
| IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01); |
| } |
| |
| |
| /***************************************************************************** |
| * XOR1 |
| ****************************************************************************/ |
| void __init kirkwood_xor1_init(void) |
| { |
| orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE, |
| IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11); |
| } |
| |
| |
| /***************************************************************************** |
| * Watchdog |
| ****************************************************************************/ |
| void __init kirkwood_wdt_init(void) |
| { |
| orion_wdt_init(); |
| } |
| |
| /***************************************************************************** |
| * CPU idle |
| ****************************************************************************/ |
| static struct resource kirkwood_cpuidle_resource[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| .start = DDR_OPERATION_BASE, |
| .end = DDR_OPERATION_BASE + 3, |
| }, |
| }; |
| |
| static struct platform_device kirkwood_cpuidle = { |
| .name = "kirkwood_cpuidle", |
| .id = -1, |
| .resource = kirkwood_cpuidle_resource, |
| .num_resources = 1, |
| }; |
| |
| void __init kirkwood_cpuidle_init(void) |
| { |
| platform_device_register(&kirkwood_cpuidle); |
| } |
| |
| /***************************************************************************** |
| * Time handling |
| ****************************************************************************/ |
| void __init kirkwood_init_early(void) |
| { |
| orion_time_set_base(TIMER_VIRT_BASE); |
| } |
| |
| int kirkwood_tclk; |
| |
| static int __init kirkwood_find_tclk(void) |
| { |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| |
| if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID) |
| if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0) |
| return 200000000; |
| |
| return 166666667; |
| } |
| |
| void __init kirkwood_timer_init(void) |
| { |
| kirkwood_tclk = kirkwood_find_tclk(); |
| |
| orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, |
| IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); |
| } |
| |
| /***************************************************************************** |
| * Audio |
| ****************************************************************************/ |
| static struct resource kirkwood_audio_resources[] = { |
| [0] = { |
| .start = AUDIO_PHYS_BASE, |
| .end = AUDIO_PHYS_BASE + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_KIRKWOOD_I2S, |
| .end = IRQ_KIRKWOOD_I2S, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct kirkwood_asoc_platform_data kirkwood_audio_data = { |
| .burst = 128, |
| }; |
| |
| static struct platform_device kirkwood_audio_device = { |
| .name = "mvebu-audio", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(kirkwood_audio_resources), |
| .resource = kirkwood_audio_resources, |
| .dev = { |
| .platform_data = &kirkwood_audio_data, |
| }, |
| }; |
| |
| void __init kirkwood_audio_init(void) |
| { |
| platform_device_register(&kirkwood_audio_device); |
| } |
| |
| /***************************************************************************** |
| * CPU Frequency |
| ****************************************************************************/ |
| static struct resource kirkwood_cpufreq_resources[] = { |
| [0] = { |
| .start = CPU_CONTROL_PHYS, |
| .end = CPU_CONTROL_PHYS + 3, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device kirkwood_cpufreq_device = { |
| .name = "kirkwood-cpufreq", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), |
| .resource = kirkwood_cpufreq_resources, |
| }; |
| |
| void __init kirkwood_cpufreq_init(void) |
| { |
| platform_device_register(&kirkwood_cpufreq_device); |
| } |
| |
| /***************************************************************************** |
| * General |
| ****************************************************************************/ |
| /* |
| * Identify device ID and revision. |
| */ |
| char * __init kirkwood_id(void) |
| { |
| u32 dev, rev; |
| |
| kirkwood_pcie_id(&dev, &rev); |
| |
| if (dev == MV88F6281_DEV_ID) { |
| if (rev == MV88F6281_REV_Z0) |
| return "MV88F6281-Z0"; |
| else if (rev == MV88F6281_REV_A0) |
| return "MV88F6281-A0"; |
| else if (rev == MV88F6281_REV_A1) |
| return "MV88F6281-A1"; |
| else |
| return "MV88F6281-Rev-Unsupported"; |
| } else if (dev == MV88F6192_DEV_ID) { |
| if (rev == MV88F6192_REV_Z0) |
| return "MV88F6192-Z0"; |
| else if (rev == MV88F6192_REV_A0) |
| return "MV88F6192-A0"; |
| else if (rev == MV88F6192_REV_A1) |
| return "MV88F6192-A1"; |
| else |
| return "MV88F6192-Rev-Unsupported"; |
| } else if (dev == MV88F6180_DEV_ID) { |
| if (rev == MV88F6180_REV_A0) |
| return "MV88F6180-Rev-A0"; |
| else if (rev == MV88F6180_REV_A1) |
| return "MV88F6180-Rev-A1"; |
| else |
| return "MV88F6180-Rev-Unsupported"; |
| } else if (dev == MV88F6282_DEV_ID) { |
| if (rev == MV88F6282_REV_A0) |
| return "MV88F6282-Rev-A0"; |
| else if (rev == MV88F6282_REV_A1) |
| return "MV88F6282-Rev-A1"; |
| else |
| return "MV88F6282-Rev-Unsupported"; |
| } else { |
| return "Device-Unknown"; |
| } |
| } |
| |
| void __init kirkwood_setup_wins(void) |
| { |
| mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET, |
| KIRKWOOD_MBUS_NAND_ATTR, |
| KIRKWOOD_NAND_MEM_PHYS_BASE, |
| KIRKWOOD_NAND_MEM_SIZE); |
| mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET, |
| KIRKWOOD_MBUS_SRAM_ATTR, |
| KIRKWOOD_SRAM_PHYS_BASE, |
| KIRKWOOD_SRAM_SIZE); |
| } |
| |
| void __init kirkwood_l2_init(void) |
| { |
| #ifdef CONFIG_CACHE_FEROCEON_L2 |
| #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH |
| writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); |
| feroceon_l2_init(1); |
| #else |
| writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); |
| feroceon_l2_init(0); |
| #endif |
| #endif |
| } |
| |
| void __init kirkwood_init(void) |
| { |
| pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); |
| |
| /* |
| * Disable propagation of mbus errors to the CPU local bus, |
| * as this causes mbus errors (which can occur for example |
| * for PCI aborts) to throw CPU aborts, which we're not set |
| * up to deal with. |
| */ |
| writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); |
| |
| BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", |
| BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, |
| DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); |
| |
| kirkwood_setup_wins(); |
| |
| kirkwood_l2_init(); |
| |
| /* Setup root of clk tree */ |
| kirkwood_clk_init(); |
| |
| /* internal devices that every board has */ |
| kirkwood_rtc_init(); |
| kirkwood_wdt_init(); |
| kirkwood_xor0_init(); |
| kirkwood_xor1_init(); |
| kirkwood_crypto_init(); |
| |
| kirkwood_pm_init(); |
| kirkwood_cpuidle_init(); |
| #ifdef CONFIG_KEXEC |
| kexec_reinit = kirkwood_enable_pcie; |
| #endif |
| } |
| |
| void kirkwood_restart(enum reboot_mode mode, const char *cmd) |
| { |
| /* |
| * Enable soft reset to assert RSTOUTn. |
| */ |
| writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); |
| |
| /* |
| * Assert soft reset. |
| */ |
| writel(SOFT_RESET, SYSTEM_SOFT_RESET); |
| |
| while (1) |
| ; |
| } |