arch/arm/mach-pxa/pxa27x.c - maze/linux - Git at Google

 /*
  *  linux/arch/arm/mach-pxa/pxa27x.c
  *
  *  Author:	Nicolas Pitre
  *  Created:	Nov 05, 2002
  *  Copyright:	MontaVista Software Inc.
  *
  * Code specific to PXA27x aka Bulverde.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>

 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/dma.h>
 #include <asm/arch/i2c.h>

 #include "generic.h"
 #include "devices.h"
 #include "clock.h"

 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000

 /*
  * Get the clock frequency as reflected by CCSR and the turbo flag.
  * We assume these values have been applied via a fcs.
  * If info is not 0 we also display the current settings.
  */
 unsigned int pxa27x_get_clk_frequency_khz(int info)
 {
 	unsigned long ccsr, clkcfg;
 	unsigned int l, L, m, M, n2, N, S;
        	int cccr_a, t, ht, b;

 	ccsr = CCSR;
 	cccr_a = CCCR & (1 << 25);

 	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
 	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
 	t  = clkcfg & (1 << 0);
 	ht = clkcfg & (1 << 2);
 	b  = clkcfg & (1 << 3);

 	l  = ccsr & 0x1f;
 	n2 = (ccsr>>7) & 0xf;
 	m  = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;

 	L  = l * BASE_CLK;
 	N  = (L * n2) / 2;
 	M  = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
 	S  = (b) ? L : (L/2);

 	if (info) {
 		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
 			L / 1000000, (L % 1000000) / 10000, l );
 		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
 			N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
 			(t) ? "" : "in" );
 		printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
 			M / 1000000, (M % 1000000) / 10000, m );
 		printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
 			S / 1000000, (S % 1000000) / 10000 );
 	}

 	return (t) ? (N/1000) : (L/1000);
 }

 /*
  * Return the current mem clock frequency in units of 10kHz as
  * reflected by CCCR[A], B, and L
  */
 unsigned int pxa27x_get_memclk_frequency_10khz(void)
 {
 	unsigned long ccsr, clkcfg;
 	unsigned int l, L, m, M;
        	int cccr_a, b;

 	ccsr = CCSR;
 	cccr_a = CCCR & (1 << 25);

 	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
 	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
 	b = clkcfg & (1 << 3);

 	l = ccsr & 0x1f;
 	m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;

 	L = l * BASE_CLK;
 	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));

 	return (M / 10000);
 }

 /*
  * Return the current LCD clock frequency in units of 10kHz as
  */
 static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
 {
 	unsigned long ccsr;
 	unsigned int l, L, k, K;

 	ccsr = CCSR;

 	l = ccsr & 0x1f;
 	k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;

 	L = l * BASE_CLK;
 	K = L / k;

 	return (K / 10000);
 }

 static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
 {
 	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
 }

 static const struct clkops clk_pxa27x_lcd_ops = {
 	.enable		= clk_cken_enable,
 	.disable	= clk_cken_disable,
 	.getrate	= clk_pxa27x_lcd_getrate,
 };

 static struct clk pxa27x_clks[] = {
 	INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
 	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),

 	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
 	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
 	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),

 	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
 	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
 	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
 	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),

 	INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
 	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
 	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev),

 	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
 	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
 	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),

 	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
 	INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),

 	/*
 	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
 	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
 	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
 	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
 	INIT_CKEN("IMCLK",   IM,   0, 0, NULL),
 	INIT_CKEN("MEMCLK",  MEMC, 0, 0, NULL),
 	*/
 };

 #ifdef CONFIG_PM

 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]

 /*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
 enum {	SLEEP_SAVE_START = 0,

 	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,

 	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
 	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
 	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
 	SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,

 	SLEEP_SAVE_PSTR,

 	SLEEP_SAVE_CKEN,

 	SLEEP_SAVE_MDREFR,
 	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
 	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,

 	SLEEP_SAVE_SIZE
 };

 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
 	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);

 	SAVE(GAFR0_L); SAVE(GAFR0_U);
 	SAVE(GAFR1_L); SAVE(GAFR1_U);
 	SAVE(GAFR2_L); SAVE(GAFR2_U);
 	SAVE(GAFR3_L); SAVE(GAFR3_U);

 	SAVE(MDREFR);
 	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
 	SAVE(PFER); SAVE(PKWR);

 	SAVE(CKEN);
 	SAVE(PSTR);
 }

 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
 	/* ensure not to come back here if it wasn't intended */
 	PSPR = 0;

 	/* restore registers */
 	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
 	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
 	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
 	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);

 	RESTORE(MDREFR);
 	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
 	RESTORE(PFER); RESTORE(PKWR);

 	PSSR = PSSR_RDH | PSSR_PH;

 	RESTORE(CKEN);

 	RESTORE(PSTR);
 }

 void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);

 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;

 	/* Clear edge-detect status register. */
 	PEDR = 0xDF12FE1B;

 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
 		PSPR = virt_to_phys(pxa_cpu_resume);
 		pxa27x_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }

 static int pxa27x_cpu_pm_valid(suspend_state_t state)
 {
 	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
 }

 static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
 	.save_size	= SLEEP_SAVE_SIZE,
 	.save		= pxa27x_cpu_pm_save,
 	.restore	= pxa27x_cpu_pm_restore,
 	.valid		= pxa27x_cpu_pm_valid,
 	.enter		= pxa27x_cpu_pm_enter,
 };

 static void __init pxa27x_init_pm(void)
 {
 	pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
 }
 #else
 static inline void pxa27x_init_pm(void) {}
 #endif

 /* PXA27x:  Various gpios can issue wakeup events.  This logic only
  * handles the simple cases, not the WEMUX2 and WEMUX3 options
  */
 static int pxa27x_set_wake(unsigned int irq, unsigned int on)
 {
 	int gpio = IRQ_TO_GPIO(irq);
 	uint32_t mask;

 	if (gpio >= 0 && gpio < 128)
 		return gpio_set_wake(gpio, on);

 	if (irq == IRQ_KEYPAD)
 		return keypad_set_wake(on);

 	switch (irq) {
 	case IRQ_RTCAlrm:
 		mask = PWER_RTC;
 		break;
 	case IRQ_USB:
 		mask = 1u << 26;
 		break;
 	default:
 		return -EINVAL;
 	}

 	if (on)
 		PWER |= mask;
 	else
 		PWER &=~mask;

 	return 0;
 }

 void __init pxa27x_init_irq(void)
 {
 	pxa_init_irq(34, pxa27x_set_wake);
 	pxa_init_gpio(128, pxa27x_set_wake);
 }

 /*
  * device registration specific to PXA27x.
  */

 static struct resource i2c_power_resources[] = {
 	{
 		.start	= 0x40f00180,
 		.end	= 0x40f001a3,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_PWRI2C,
 		.end	= IRQ_PWRI2C,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 struct platform_device pxa27x_device_i2c_power = {
 	.name		= "pxa2xx-i2c",
 	.id		= 1,
 	.resource	= i2c_power_resources,
 	.num_resources	= ARRAY_SIZE(i2c_power_resources),
 };

 void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
 	pxa27x_device_i2c_power.dev.platform_data = info;
 }

 static struct platform_device *devices[] __initdata = {
 	&pxa_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&pxa_device_rtc,
 	&pxa27x_device_i2c_power,
 	&pxa27x_device_ssp1,
 	&pxa27x_device_ssp2,
 	&pxa27x_device_ssp3,
 };

 static struct sys_device pxa27x_sysdev[] = {
 	{
 		.cls	= &pxa_irq_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
 };

 static int __init pxa27x_init(void)
 {
 	int i, ret = 0;

 	if (cpu_is_pxa27x()) {
 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));

 		if ((ret = pxa_init_dma(32)))
 			return ret;

 		pxa27x_init_pm();

 		for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) {
 			ret = sysdev_register(&pxa27x_sysdev[i]);
 			if (ret)
 				pr_err("failed to register sysdev[%d]\n", i);
 		}

 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}

 	return ret;
 }

 postcore_initcall(pxa27x_init);
	/*
	* linux/arch/arm/mach-pxa/pxa27x.c
	*
	* Author: Nicolas Pitre
	* Created: Nov 05, 2002
	* Copyright: MontaVista Software Inc.
	*
	* Code specific to PXA27x aka Bulverde.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/
	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/suspend.h>
	#include <linux/platform_device.h>
	#include <linux/sysdev.h>

	#include <asm/hardware.h>
	#include <asm/irq.h>
	#include <asm/arch/irqs.h>
	#include <asm/arch/pxa-regs.h>
	#include <asm/arch/pxa2xx-regs.h>
	#include <asm/arch/mfp-pxa27x.h>
	#include <asm/arch/ohci.h>
	#include <asm/arch/pm.h>
	#include <asm/arch/dma.h>
	#include <asm/arch/i2c.h>

	#include "generic.h"
	#include "devices.h"
	#include "clock.h"

	/* Crystal clock: 13MHz */
	#define BASE_CLK 13000000

	/*
	* Get the clock frequency as reflected by CCSR and the turbo flag.
	* We assume these values have been applied via a fcs.
	* If info is not 0 we also display the current settings.
	*/
	unsigned int pxa27x_get_clk_frequency_khz(int info)
	{
	unsigned long ccsr, clkcfg;
	unsigned int l, L, m, M, n2, N, S;
	int cccr_a, t, ht, b;

	ccsr = CCSR;
	cccr_a = CCCR & (1 << 25);

	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
	t = clkcfg & (1 << 0);
	ht = clkcfg & (1 << 2);
	b = clkcfg & (1 << 3);

	l = ccsr & 0x1f;
	n2 = (ccsr>>7) & 0xf;
	m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;

	L = l * BASE_CLK;
	N = (L * n2) / 2;
	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
	S = (b) ? L : (L/2);

	if (info) {
	printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
	L / 1000000, (L % 1000000) / 10000, l );
	printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
	N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
	(t) ? "" : "in" );
	printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
	M / 1000000, (M % 1000000) / 10000, m );
	printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
	S / 1000000, (S % 1000000) / 10000 );
	}

	return (t) ? (N/1000) : (L/1000);
	}

	/*
	* Return the current mem clock frequency in units of 10kHz as
	* reflected by CCCR[A], B, and L
	*/
	unsigned int pxa27x_get_memclk_frequency_10khz(void)
	{
	unsigned long ccsr, clkcfg;
	unsigned int l, L, m, M;
	int cccr_a, b;

	ccsr = CCSR;
	cccr_a = CCCR & (1 << 25);

	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
	b = clkcfg & (1 << 3);

	l = ccsr & 0x1f;
	m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;

	L = l * BASE_CLK;
	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));

	return (M / 10000);
	}

	/*
	* Return the current LCD clock frequency in units of 10kHz as
	*/
	static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
	{
	unsigned long ccsr;
	unsigned int l, L, k, K;

	ccsr = CCSR;

	l = ccsr & 0x1f;
	k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;

	L = l * BASE_CLK;
	K = L / k;

	return (K / 10000);
	}

	static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
	{
	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
	}

	static const struct clkops clk_pxa27x_lcd_ops = {
	.enable = clk_cken_enable,
	.disable = clk_cken_disable,
	.getrate = clk_pxa27x_lcd_getrate,
	};

	static struct clk pxa27x_clks[] = {
	INIT_CK("LCDCLK", LCD, &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),

	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),

	INIT_CKEN("I2SCLK", I2S, 14682000, 0, &pxa_device_i2s.dev),
	INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
	INIT_CKEN("UDCCLK", USB, 48000000, 5, &pxa_device_udc.dev),
	INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev),
	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),

	INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev),

	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),

	INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL),
	INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),

	/*
	INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL),
	INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL),
	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
	INIT_CKEN("IMCLK", IM, 0, 0, NULL),
	INIT_CKEN("MEMCLK", MEMC, 0, 0, NULL),
	*/
	};

	#ifdef CONFIG_PM

	#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
	#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]

	/*
	* List of global PXA peripheral registers to preserve.
	* More ones like CP and general purpose register values are preserved
	* with the stack pointer in sleep.S.
	*/
	enum { SLEEP_SAVE_START = 0,

	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,

	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
	SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,

	SLEEP_SAVE_PSTR,

	SLEEP_SAVE_CKEN,

	SLEEP_SAVE_MDREFR,
	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,

	SLEEP_SAVE_SIZE
	};

	void pxa27x_cpu_pm_save(unsigned long *sleep_save)
	{
	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);

	SAVE(GAFR0_L); SAVE(GAFR0_U);
	SAVE(GAFR1_L); SAVE(GAFR1_U);
	SAVE(GAFR2_L); SAVE(GAFR2_U);
	SAVE(GAFR3_L); SAVE(GAFR3_U);

	SAVE(MDREFR);
	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
	SAVE(PFER); SAVE(PKWR);

	SAVE(CKEN);
	SAVE(PSTR);
	}

	void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
	{
	/* ensure not to come back here if it wasn't intended */
	PSPR = 0;

	/* restore registers */
	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);

	RESTORE(MDREFR);
	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
	RESTORE(PFER); RESTORE(PKWR);

	PSSR = PSSR_RDH \| PSSR_PH;

	RESTORE(CKEN);

	RESTORE(PSTR);
	}

	void pxa27x_cpu_pm_enter(suspend_state_t state)
	{
	extern void pxa_cpu_standby(void);

	/* ensure voltage-change sequencer not initiated, which hangs */
	PCFR &= ~PCFR_FVC;

	/* Clear edge-detect status register. */
	PEDR = 0xDF12FE1B;

	switch (state) {
	case PM_SUSPEND_STANDBY:
	pxa_cpu_standby();
	break;
	case PM_SUSPEND_MEM:
	/* set resume return address */
	PSPR = virt_to_phys(pxa_cpu_resume);
	pxa27x_cpu_suspend(PWRMODE_SLEEP);
	break;
	}
	}

	static int pxa27x_cpu_pm_valid(suspend_state_t state)
	{
	return state == PM_SUSPEND_MEM \|\| state == PM_SUSPEND_STANDBY;
	}

	static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
	.save_size = SLEEP_SAVE_SIZE,
	.save = pxa27x_cpu_pm_save,
	.restore = pxa27x_cpu_pm_restore,
	.valid = pxa27x_cpu_pm_valid,
	.enter = pxa27x_cpu_pm_enter,
	};

	static void __init pxa27x_init_pm(void)
	{
	pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
	}
	#else
	static inline void pxa27x_init_pm(void) {}
	#endif

	/* PXA27x: Various gpios can issue wakeup events. This logic only
	* handles the simple cases, not the WEMUX2 and WEMUX3 options
	*/
	static int pxa27x_set_wake(unsigned int irq, unsigned int on)
	{
	int gpio = IRQ_TO_GPIO(irq);
	uint32_t mask;

	if (gpio >= 0 && gpio < 128)
	return gpio_set_wake(gpio, on);

	if (irq == IRQ_KEYPAD)
	return keypad_set_wake(on);

	switch (irq) {
	case IRQ_RTCAlrm:
	mask = PWER_RTC;
	break;
	case IRQ_USB:
	mask = 1u << 26;
	break;
	default:
	return -EINVAL;
	}

	if (on)
	PWER \|= mask;
	else
	PWER &=~mask;

	return 0;
	}

	void __init pxa27x_init_irq(void)
	{
	pxa_init_irq(34, pxa27x_set_wake);
	pxa_init_gpio(128, pxa27x_set_wake);
	}

	/*
	* device registration specific to PXA27x.
	*/

	static struct resource i2c_power_resources[] = {
	{
	.start = 0x40f00180,
	.end = 0x40f001a3,
	.flags = IORESOURCE_MEM,
	}, {
	.start = IRQ_PWRI2C,
	.end = IRQ_PWRI2C,
	.flags = IORESOURCE_IRQ,
	},
	};

	struct platform_device pxa27x_device_i2c_power = {
	.name = "pxa2xx-i2c",
	.id = 1,
	.resource = i2c_power_resources,
	.num_resources = ARRAY_SIZE(i2c_power_resources),
	};

	void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
	{
	pxa27x_device_i2c_power.dev.platform_data = info;
	}

	static struct platform_device *devices[] __initdata = {
	&pxa_device_udc,
	&pxa_device_ffuart,
	&pxa_device_btuart,
	&pxa_device_stuart,
	&pxa_device_i2s,
	&pxa_device_rtc,
	&pxa27x_device_i2c_power,
	&pxa27x_device_ssp1,
	&pxa27x_device_ssp2,
	&pxa27x_device_ssp3,
	};

	static struct sys_device pxa27x_sysdev[] = {
	{
	.cls = &pxa_irq_sysclass,
	}, {
	.cls = &pxa_gpio_sysclass,
	},
	};

	static int __init pxa27x_init(void)
	{
	int i, ret = 0;

	if (cpu_is_pxa27x()) {
	clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));

	if ((ret = pxa_init_dma(32)))
	return ret;

	pxa27x_init_pm();

	for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) {
	ret = sysdev_register(&pxa27x_sysdev[i]);
	if (ret)
	pr_err("failed to register sysdev[%d]\n", i);
	}

	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
	}

	return ret;
	}

	postcore_initcall(pxa27x_init);