blob: 3264b8883d5f8cc1afdf5b98c2a8dabe29a7cfea [file] [log] [blame]
/***************************************************************************/
/*
* linux/arch/m68knommu/platform/520x/config.c
*
* Copyright (C) 2005, Freescale (www.freescale.com)
* Copyright (C) 2005, Intec Automation (mike@steroidmicros.com)
* Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfgpio.h>
/***************************************************************************/
struct mcf_gpio_chip mcf_gpio_chips[] = {
MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
MCFGPF(CS, 9, 3),
MCFGPF(FECI2C, 16, 4),
MCFGPF(QSPI, 24, 4),
MCFGPF(TIMER, 32, 4),
MCFGPF(UART, 40, 8),
MCFGPF(FECH, 48, 8),
MCFGPF(FECL, 56, 8),
};
unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m520x_qspi_init(void)
{
u16 par;
/* setup Port QS for QSPI with gpio CS control */
writeb(0x3f, MCF_GPIO_PAR_QSPI);
/* make U1CTS and U2RTS gpio for cs_control */
par = readw(MCF_GPIO_PAR_UART);
par &= 0x00ff;
writew(par, MCF_GPIO_PAR_UART);
}
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
static void __init m520x_uarts_init(void)
{
u16 par;
u8 par2;
/* UART0 and UART1 GPIO pin setup */
par = readw(MCF_GPIO_PAR_UART);
par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
writew(par, MCF_GPIO_PAR_UART);
/* UART1 GPIO pin setup */
par2 = readb(MCF_GPIO_PAR_FECI2C);
par2 &= ~0x0F;
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
writeb(par2, MCF_GPIO_PAR_FECI2C);
}
/***************************************************************************/
static void __init m520x_fec_init(void)
{
u8 v;
/* Set multi-function pins to ethernet mode */
v = readb(MCF_GPIO_PAR_FEC);
writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
v = readb(MCF_GPIO_PAR_FECI2C);
writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
m520x_uarts_init();
m520x_fec_init();
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m520x_qspi_init();
#endif
}
/***************************************************************************/