Google Git
Sign in
googlers / maze / linux / 1036d8642b6bb604774ea143120fe10ede4ab078 / . / net / mac80211 / ieee80211.c
blob: 9c14e3d303c549229eccc6d922350e87670ce9fb [file] [log] [blame]
/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
#include <net/net_namespace.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "ieee80211_rate.h"
#include "wep.h"
#include "wme.h"
#include "aes_ccm.h"
#include "ieee80211_led.h"
#include "cfg.h"
#include "debugfs.h"
#include "debugfs_netdev.h"
#define SUPP_MCS_SET_LEN 16
/*
* For seeing transmitted packets on monitor interfaces
* we have a radiotap header too.
*/
struct ieee80211_tx_status_rtap_hdr {
struct ieee80211_radiotap_header hdr;
__le16 tx_flags;
u8 data_retries;
} __attribute__ ((packed));
/* common interface routines */
static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
{
memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
return ETH_ALEN;
}
/* must be called under mdev tx lock */
static void ieee80211_configure_filter(struct ieee80211_local *local)
{
unsigned int changed_flags;
unsigned int new_flags = 0;
if (atomic_read(&local->iff_promiscs))
new_flags |= FIF_PROMISC_IN_BSS;
if (atomic_read(&local->iff_allmultis))
new_flags |= FIF_ALLMULTI;
if (local->monitors)
new_flags |= FIF_CONTROL |
FIF_OTHER_BSS |
FIF_BCN_PRBRESP_PROMISC;
changed_flags = local->filter_flags ^ new_flags;
/* be a bit nasty */
new_flags |= (1<<31);
local->ops->configure_filter(local_to_hw(local),
changed_flags, &new_flags,
local->mdev->mc_count,
local->mdev->mc_list);
WARN_ON(new_flags & (1<<31));
local->filter_flags = new_flags & ~(1<<31);
}
/* master interface */
static int ieee80211_master_open(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
int res = -EOPNOTSUPP;
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->dev != dev && netif_running(sdata->dev)) {
res = 0;
break;
}
}
return res;
}
static int ieee80211_master_stop(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(sdata, &local->interfaces, list)
if (sdata->dev != dev && netif_running(sdata->dev))
dev_close(sdata->dev);
return 0;
}
static void ieee80211_master_set_multicast_list(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
ieee80211_configure_filter(local);
}
/* regular interfaces */
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
{
/* FIX: what would be proper limits for MTU?
* This interface uses 802.3 frames. */
if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6) {
printk(KERN_WARNING "%s: invalid MTU %d\n",
dev->name, new_mtu);
return -EINVAL;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
dev->mtu = new_mtu;
return 0;
}
static inline int identical_mac_addr_allowed(int type1, int type2)
{
return (type1 == IEEE80211_IF_TYPE_MNTR ||
type2 == IEEE80211_IF_TYPE_MNTR ||
(type1 == IEEE80211_IF_TYPE_AP &&
type2 == IEEE80211_IF_TYPE_WDS) ||
(type1 == IEEE80211_IF_TYPE_WDS &&
(type2 == IEEE80211_IF_TYPE_WDS ||
type2 == IEEE80211_IF_TYPE_AP)) ||
(type1 == IEEE80211_IF_TYPE_AP &&
type2 == IEEE80211_IF_TYPE_VLAN) ||
(type1 == IEEE80211_IF_TYPE_VLAN &&
(type2 == IEEE80211_IF_TYPE_AP ||
type2 == IEEE80211_IF_TYPE_VLAN)));
}
static int ieee80211_open(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata, *nsdata;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_init_conf conf;
int res;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(nsdata, &local->interfaces, list) {
struct net_device *ndev = nsdata->dev;
if (ndev != dev && ndev != local->mdev && netif_running(ndev) &&
compare_ether_addr(dev->dev_addr, ndev->dev_addr) == 0) {
/*
* check whether it may have the same address
*/
if (!identical_mac_addr_allowed(sdata->type,
nsdata->type))
return -ENOTUNIQ;
/*
* can only add VLANs to enabled APs
*/
if (sdata->type == IEEE80211_IF_TYPE_VLAN &&
nsdata->type == IEEE80211_IF_TYPE_AP &&
netif_running(nsdata->dev))
sdata->u.vlan.ap = nsdata;
}
}
switch (sdata->type) {
case IEEE80211_IF_TYPE_WDS:
if (is_zero_ether_addr(sdata->u.wds.remote_addr))
return -ENOLINK;
break;
case IEEE80211_IF_TYPE_VLAN:
if (!sdata->u.vlan.ap)
return -ENOLINK;
break;
case IEEE80211_IF_TYPE_AP:
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_MNTR:
case IEEE80211_IF_TYPE_IBSS:
/* no special treatment */
break;
case IEEE80211_IF_TYPE_INVALID:
/* cannot happen */
WARN_ON(1);
break;
}
if (local->open_count == 0) {
res = 0;
if (local->ops->start)
res = local->ops->start(local_to_hw(local));
if (res)
return res;
ieee80211_hw_config(local);
}
switch (sdata->type) {
case IEEE80211_IF_TYPE_VLAN:
list_add(&sdata->u.vlan.list, &sdata->u.vlan.ap->u.ap.vlans);
/* no need to tell driver */
break;
case IEEE80211_IF_TYPE_MNTR:
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
if (local->monitors == 1) {
netif_tx_lock_bh(local->mdev);
ieee80211_configure_filter(local);
netif_tx_unlock_bh(local->mdev);
local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
}
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
/* fall through */
default:
conf.if_id = dev->ifindex;
conf.type = sdata->type;
conf.mac_addr = dev->dev_addr;
res = local->ops->add_interface(local_to_hw(local), &conf);
if (res && !local->open_count && local->ops->stop)
local->ops->stop(local_to_hw(local));
if (res)
return res;
ieee80211_if_config(dev);
ieee80211_reset_erp_info(dev);
ieee80211_enable_keys(sdata);
if (sdata->type == IEEE80211_IF_TYPE_STA &&
!(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
netif_carrier_off(dev);
else
netif_carrier_on(dev);
}
if (local->open_count == 0) {
res = dev_open(local->mdev);
WARN_ON(res);
tasklet_enable(&local->tx_pending_tasklet);
tasklet_enable(&local->tasklet);
}
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
* error and sync them down to the hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_inc(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_inc(&local->iff_promiscs);
local->open_count++;
netif_start_queue(dev);
return 0;
}
static int ieee80211_stop(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_init_conf conf;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
netif_stop_queue(dev);
/*
* Don't count this interface for promisc/allmulti while it
* is down. dev_mc_unsync() will invoke set_multicast_list
* on the master interface which will sync these down to the
* hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_dec(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_dec(&local->iff_promiscs);
dev_mc_unsync(local->mdev, dev);
/* down all dependent devices, that is VLANs */
if (sdata->type == IEEE80211_IF_TYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmp;
list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
WARN_ON(!list_empty(&sdata->u.ap.vlans));
}
local->open_count--;
switch (sdata->type) {
case IEEE80211_IF_TYPE_VLAN:
list_del(&sdata->u.vlan.list);
sdata->u.vlan.ap = NULL;
/* no need to tell driver */
break;
case IEEE80211_IF_TYPE_MNTR:
local->monitors--;
if (local->monitors == 0) {
netif_tx_lock_bh(local->mdev);
ieee80211_configure_filter(local);
netif_tx_unlock_bh(local->mdev);
local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
}
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.state = IEEE80211_DISABLED;
del_timer_sync(&sdata->u.sta.timer);
/*
* When we get here, the interface is marked down.
* Call synchronize_rcu() to wait for the RX path
* should it be using the interface and enqueuing
* frames at this very time on another CPU.
*/
synchronize_rcu();
skb_queue_purge(&sdata->u.sta.skb_queue);
if (local->scan_dev == sdata->dev) {
if (!local->ops->hw_scan) {
local->sta_sw_scanning = 0;
cancel_delayed_work(&local->scan_work);
} else
local->sta_hw_scanning = 0;
}
flush_workqueue(local->hw.workqueue);
sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
kfree(sdata->u.sta.extra_ie);
sdata->u.sta.extra_ie = NULL;
sdata->u.sta.extra_ie_len = 0;
/* fall through */
default:
conf.if_id = dev->ifindex;
conf.type = sdata->type;
conf.mac_addr = dev->dev_addr;
/* disable all keys for as long as this netdev is down */
ieee80211_disable_keys(sdata);
local->ops->remove_interface(local_to_hw(local), &conf);
}
if (local->open_count == 0) {
if (netif_running(local->mdev))
dev_close(local->mdev);
if (local->ops->stop)
local->ops->stop(local_to_hw(local));
tasklet_disable(&local->tx_pending_tasklet);
tasklet_disable(&local->tasklet);
}
return 0;
}
static void ieee80211_set_multicast_list(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int allmulti, promisc, sdata_allmulti, sdata_promisc;
allmulti = !!(dev->flags & IFF_ALLMULTI);
promisc = !!(dev->flags & IFF_PROMISC);
sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
if (allmulti != sdata_allmulti) {
if (dev->flags & IFF_ALLMULTI)
atomic_inc(&local->iff_allmultis);
else
atomic_dec(&local->iff_allmultis);
sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
}
if (promisc != sdata_promisc) {
if (dev->flags & IFF_PROMISC)
atomic_inc(&local->iff_promiscs);
else
atomic_dec(&local->iff_promiscs);
sdata->flags ^= IEEE80211_SDATA_PROMISC;
}
dev_mc_sync(local->mdev, dev);
}
static const struct header_ops ieee80211_header_ops = {
.create = eth_header,
.parse = header_parse_80211,
.rebuild = eth_rebuild_header,
.cache = eth_header_cache,
.cache_update = eth_header_cache_update,
};
/* Must not be called for mdev */
void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
dev->hard_start_xmit = ieee80211_subif_start_xmit;
dev->wireless_handlers = &ieee80211_iw_handler_def;
dev->set_multicast_list = ieee80211_set_multicast_list;
dev->change_mtu = ieee80211_change_mtu;
dev->open = ieee80211_open;
dev->stop = ieee80211_stop;
dev->destructor = ieee80211_if_free;
}
/* WDS specialties */
int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
DECLARE_MAC_BUF(mac);
if (compare_ether_addr(remote_addr, sdata->u.wds.remote_addr) == 0)
return 0;
/* Create STA entry for the new peer */
sta = sta_info_add(local, dev, remote_addr, GFP_KERNEL);
if (!sta)
return -ENOMEM;
sta_info_put(sta);
/* Remove STA entry for the old peer */
sta = sta_info_get(local, sdata->u.wds.remote_addr);
if (sta) {
sta_info_free(sta);
sta_info_put(sta);
} else {
printk(KERN_DEBUG "%s: could not find STA entry for WDS link "
"peer %s\n",
dev->name, print_mac(mac, sdata->u.wds.remote_addr));
}
/* Update WDS link data */
memcpy(&sdata->u.wds.remote_addr, remote_addr, ETH_ALEN);
return 0;
}
/* everything else */
static int __ieee80211_if_config(struct net_device *dev,
struct sk_buff *beacon,
struct ieee80211_tx_control *control)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_conf conf;
if (!local->ops->config_interface || !netif_running(dev))
return 0;
memset(&conf, 0, sizeof(conf));
conf.type = sdata->type;
if (sdata->type == IEEE80211_IF_TYPE_STA ||
sdata->type == IEEE80211_IF_TYPE_IBSS) {
conf.bssid = sdata->u.sta.bssid;
conf.ssid = sdata->u.sta.ssid;
conf.ssid_len = sdata->u.sta.ssid_len;
} else if (sdata->type == IEEE80211_IF_TYPE_AP) {
conf.ssid = sdata->u.ap.ssid;
conf.ssid_len = sdata->u.ap.ssid_len;
conf.beacon = beacon;
conf.beacon_control = control;
}
return local->ops->config_interface(local_to_hw(local),
dev->ifindex, &conf);
}
int ieee80211_if_config(struct net_device *dev)
{
return __ieee80211_if_config(dev, NULL, NULL);
}
int ieee80211_if_config_beacon(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_control control;
struct sk_buff *skb;
if (!(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE))
return 0;
skb = ieee80211_beacon_get(local_to_hw(local), dev->ifindex, &control);
if (!skb)
return -ENOMEM;
return __ieee80211_if_config(dev, skb, &control);
}
int ieee80211_hw_config(struct ieee80211_local *local)
{
struct ieee80211_hw_mode *mode;
struct ieee80211_channel *chan;
int ret = 0;
if (local->sta_sw_scanning) {
chan = local->scan_channel;
mode = local->scan_hw_mode;
} else {
chan = local->oper_channel;
mode = local->oper_hw_mode;
}
local->hw.conf.channel = chan->chan;
local->hw.conf.channel_val = chan->val;
if (!local->hw.conf.power_level) {
local->hw.conf.power_level = chan->power_level;
} else {
local->hw.conf.power_level = min(chan->power_level,
local->hw.conf.power_level);
}
local->hw.conf.freq = chan->freq;
local->hw.conf.phymode = mode->mode;
local->hw.conf.antenna_max = chan->antenna_max;
local->hw.conf.chan = chan;
local->hw.conf.mode = mode;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "HW CONFIG: channel=%d freq=%d "
"phymode=%d\n", local->hw.conf.channel, local->hw.conf.freq,
local->hw.conf.phymode);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
if (local->open_count)
ret = local->ops->config(local_to_hw(local), &local->hw.conf);
return ret;
}
/**
* ieee80211_hw_config_ht should be used only after legacy configuration
* has been determined, as ht configuration depends upon the hardware's
* HT abilities for a _specific_ band.
*/
int ieee80211_hw_config_ht(struct ieee80211_local *local, int enable_ht,
struct ieee80211_ht_info *req_ht_cap,
struct ieee80211_ht_bss_info *req_bss_cap)
{
struct ieee80211_conf *conf = &local->hw.conf;
struct ieee80211_hw_mode *mode = conf->mode;
int i;
/* HT is not supported */
if (!mode->ht_info.ht_supported) {
conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
return -EOPNOTSUPP;
}
/* disable HT */
if (!enable_ht) {
conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
} else {
conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
conf->ht_conf.cap = req_ht_cap->cap & mode->ht_info.cap;
conf->ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS);
conf->ht_conf.cap |=
mode->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS;
conf->ht_bss_conf.primary_channel =
req_bss_cap->primary_channel;
conf->ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
conf->ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
for (i = 0; i < SUPP_MCS_SET_LEN; i++)
conf->ht_conf.supp_mcs_set[i] =
mode->ht_info.supp_mcs_set[i] &
req_ht_cap->supp_mcs_set[i];
/* In STA mode, this gives us indication
* to the AP's mode of operation */
conf->ht_conf.ht_supported = 1;
conf->ht_conf.ampdu_factor = req_ht_cap->ampdu_factor;
conf->ht_conf.ampdu_density = req_ht_cap->ampdu_density;
}
local->ops->conf_ht(local_to_hw(local), &local->hw.conf);
return 0;
}
void ieee80211_erp_info_change_notify(struct net_device *dev, u8 changes)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (local->ops->erp_ie_changed)
local->ops->erp_ie_changed(local_to_hw(local), changes,
!!(sdata->flags & IEEE80211_SDATA_USE_PROTECTION),
!(sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE));
}
void ieee80211_reset_erp_info(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sdata->flags &= ~(IEEE80211_SDATA_USE_PROTECTION |
IEEE80211_SDATA_SHORT_PREAMBLE);
ieee80211_erp_info_change_notify(dev,
IEEE80211_ERP_CHANGE_PROTECTION |
IEEE80211_ERP_CHANGE_PREAMBLE);
}
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_status *saved;
int tmp;
skb->dev = local->mdev;
saved = kmalloc(sizeof(struct ieee80211_tx_status), GFP_ATOMIC);
if (unlikely(!saved)) {
if (net_ratelimit())
printk(KERN_WARNING "%s: Not enough memory, "
"dropping tx status", skb->dev->name);
/* should be dev_kfree_skb_irq, but due to this function being
* named _irqsafe instead of just _irq we can't be sure that
* people won't call it from non-irq contexts */
dev_kfree_skb_any(skb);
return;
}
memcpy(saved, status, sizeof(struct ieee80211_tx_status));
/* copy pointer to saved status into skb->cb for use by tasklet */
memcpy(skb->cb, &saved, sizeof(saved));
skb->pkt_type = IEEE80211_TX_STATUS_MSG;
skb_queue_tail(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS ?
&local->skb_queue : &local->skb_queue_unreliable, skb);
tmp = skb_queue_len(&local->skb_queue) +
skb_queue_len(&local->skb_queue_unreliable);
while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
memcpy(&saved, skb->cb, sizeof(saved));
kfree(saved);
dev_kfree_skb_irq(skb);
tmp--;
I802_DEBUG_INC(local->tx_status_drop);
}
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
static void ieee80211_tasklet_handler(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
struct sk_buff *skb;
struct ieee80211_rx_status rx_status;
struct ieee80211_tx_status *tx_status;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
switch (skb->pkt_type) {
case IEEE80211_RX_MSG:
/* status is in skb->cb */
memcpy(&rx_status, skb->cb, sizeof(rx_status));
/* Clear skb->type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
__ieee80211_rx(local_to_hw(local), skb, &rx_status);
break;
case IEEE80211_TX_STATUS_MSG:
/* get pointer to saved status out of skb->cb */
memcpy(&tx_status, skb->cb, sizeof(tx_status));
skb->pkt_type = 0;
ieee80211_tx_status(local_to_hw(local),
skb, tx_status);
kfree(tx_status);
break;
default: /* should never get here! */
printk(KERN_ERR "%s: Unknown message type (%d)\n",
wiphy_name(local->hw.wiphy), skb->pkt_type);
dev_kfree_skb(skb);
break;
}
}
}
/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
* make a prepared TX frame (one that has been given to hw) to look like brand
* new IEEE 802.11 frame that is ready to go through TX processing again.
* Also, tx_packet_data in cb is restored from tx_control. */
static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
struct ieee80211_key *key,
struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
int hdrlen, iv_len, mic_len;
struct ieee80211_tx_packet_data *pkt_data;
pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
pkt_data->ifindex = control->ifindex;
pkt_data->flags = 0;
if (control->flags & IEEE80211_TXCTL_REQ_TX_STATUS)
pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS;
if (control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)
pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT;
if (control->flags & IEEE80211_TXCTL_REQUEUE)
pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
if (control->flags & IEEE80211_TXCTL_EAPOL_FRAME)
pkt_data->flags |= IEEE80211_TXPD_EAPOL_FRAME;
pkt_data->queue = control->queue;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
if (!key)
goto no_key;
switch (key->conf.alg) {
case ALG_WEP:
iv_len = WEP_IV_LEN;
mic_len = WEP_ICV_LEN;
break;
case ALG_TKIP:
iv_len = TKIP_IV_LEN;
mic_len = TKIP_ICV_LEN;
break;
case ALG_CCMP:
iv_len = CCMP_HDR_LEN;
mic_len = CCMP_MIC_LEN;
break;
default:
goto no_key;
}
if (skb->len >= mic_len &&
!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
skb_trim(skb, skb->len - mic_len);
if (skb->len >= iv_len && skb->len > hdrlen) {
memmove(skb->data + iv_len, skb->data, hdrlen);
skb_pull(skb, iv_len);
}
no_key:
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
u16 fc = le16_to_cpu(hdr->frame_control);
if ((fc & 0x8C) == 0x88) /* QoS Control Field */ {
fc &= ~IEEE80211_STYPE_QOS_DATA;
hdr->frame_control = cpu_to_le16(fc);
memmove(skb->data + 2, skb->data, hdrlen - 2);
skb_pull(skb, 2);
}
}
}
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct sk_buff *skb2;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
u16 frag, type;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
int monitors;
if (!status) {
printk(KERN_ERR
"%s: ieee80211_tx_status called with NULL status\n",
wiphy_name(local->hw.wiphy));
dev_kfree_skb(skb);
return;
}
if (status->excessive_retries) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
if (sta->flags & WLAN_STA_PS) {
/* The STA is in power save mode, so assume
* that this TX packet failed because of that.
*/
status->excessive_retries = 0;
status->flags |= IEEE80211_TX_STATUS_TX_FILTERED;
}
sta_info_put(sta);
}
}
if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
sta->tx_filtered_count++;
/* Clear the TX filter mask for this STA when sending
* the next packet. If the STA went to power save mode,
* this will happen when it is waking up for the next
* time. */
sta->clear_dst_mask = 1;
/* TODO: Is the WLAN_STA_PS flag always set here or is
* the race between RX and TX status causing some
* packets to be filtered out before 80211.o gets an
* update for PS status? This seems to be the case, so
* no changes are likely to be needed. */
if (sta->flags & WLAN_STA_PS &&
skb_queue_len(&sta->tx_filtered) <
STA_MAX_TX_BUFFER) {
ieee80211_remove_tx_extra(local, sta->key,
skb,
&status->control);
skb_queue_tail(&sta->tx_filtered, skb);
} else if (!(sta->flags & WLAN_STA_PS) &&
!(status->control.flags & IEEE80211_TXCTL_REQUEUE)) {
/* Software retry the packet once */
status->control.flags |= IEEE80211_TXCTL_REQUEUE;
ieee80211_remove_tx_extra(local, sta->key,
skb,
&status->control);
dev_queue_xmit(skb);
} else {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: dropped TX "
"filtered frame queue_len=%d "
"PS=%d @%lu\n",
wiphy_name(local->hw.wiphy),
skb_queue_len(
&sta->tx_filtered),
!!(sta->flags & WLAN_STA_PS),
jiffies);
}
dev_kfree_skb(skb);
}
sta_info_put(sta);
return;
}
} else
rate_control_tx_status(local->mdev, skb, status);
ieee80211_led_tx(local, 0);
/* SNMP counters
* Fragments are passed to low-level drivers as separate skbs, so these
* are actually fragments, not frames. Update frame counters only for
* the first fragment of the frame. */
frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
if (status->flags & IEEE80211_TX_STATUS_ACK) {
if (frag == 0) {
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
local->dot11MulticastTransmittedFrameCount++;
if (status->retry_count > 0)
local->dot11RetryCount++;
if (status->retry_count > 1)
local->dot11MultipleRetryCount++;
}
/* This counter shall be incremented for an acknowledged MPDU
* with an individual address in the address 1 field or an MPDU
* with a multicast address in the address 1 field of type Data
* or Management. */
if (!is_multicast_ether_addr(hdr->addr1) ||
type == IEEE80211_FTYPE_DATA ||
type == IEEE80211_FTYPE_MGMT)
local->dot11TransmittedFragmentCount++;
} else {
if (frag == 0)
local->dot11FailedCount++;
}
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
if (!local->monitors) {
dev_kfree_skb(skb);
return;
}
/* send frame to monitor interfaces now */
if (skb_headroom(skb) < sizeof(*rthdr)) {
printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
dev_kfree_skb(skb);
return;
}
rthdr = (struct ieee80211_tx_status_rtap_hdr*)
skb_push(skb, sizeof(*rthdr));
memset(rthdr, 0, sizeof(*rthdr));
rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
rthdr->hdr.it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
(1 << IEEE80211_RADIOTAP_DATA_RETRIES));
if (!(status->flags & IEEE80211_TX_STATUS_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) &&
(status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS)
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
rthdr->data_retries = status->retry_count;
rcu_read_lock();
monitors = local->monitors;
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
/*
* Using the monitors counter is possibly racy, but
* if the value is wrong we simply either clone the skb
* once too much or forget sending it to one monitor iface
* The latter case isn't nice but fixing the race is much
* more complicated.
*/
if (!monitors || !skb)
goto out;
if (sdata->type == IEEE80211_IF_TYPE_MNTR) {
if (!netif_running(sdata->dev))
continue;
monitors--;
if (monitors)
skb2 = skb_clone(skb, GFP_ATOMIC);
else
skb2 = NULL;
skb->dev = sdata->dev;
/* XXX: is this sufficient for BPF? */
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
netif_rx(skb);
skb = skb2;
}
}
out:
rcu_read_unlock();
if (skb)
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
struct net_device *mdev;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
int priv_size;
struct wiphy *wiphy;
/* Ensure 32-byte alignment of our private data and hw private data.
* We use the wiphy priv data for both our ieee80211_local and for
* the driver's private data
*
* In memory it'll be like this:
*
* +-------------------------+
* | struct wiphy |
* +-------------------------+
* | struct ieee80211_local |
* +-------------------------+
* | driver's private data |
* +-------------------------+
*
*/
priv_size = ((sizeof(struct ieee80211_local) +
NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
priv_data_len;
wiphy = wiphy_new(&mac80211_config_ops, priv_size);
if (!wiphy)
return NULL;
wiphy->privid = mac80211_wiphy_privid;
local = wiphy_priv(wiphy);
local->hw.wiphy = wiphy;
local->hw.priv = (char *)local +
((sizeof(struct ieee80211_local) +
NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
BUG_ON(!ops->tx);
BUG_ON(!ops->start);
BUG_ON(!ops->stop);
BUG_ON(!ops->config);
BUG_ON(!ops->add_interface);
BUG_ON(!ops->remove_interface);
BUG_ON(!ops->configure_filter);
local->ops = ops;
/* for now, mdev needs sub_if_data :/ */
mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data),
"wmaster%d", ether_setup);
if (!mdev) {
wiphy_free(wiphy);
return NULL;
}
sdata = IEEE80211_DEV_TO_SUB_IF(mdev);
mdev->ieee80211_ptr = &sdata->wdev;
sdata->wdev.wiphy = wiphy;
local->hw.queues = 1; /* default */
local->mdev = mdev;
local->rx_pre_handlers = ieee80211_rx_pre_handlers;
local->rx_handlers = ieee80211_rx_handlers;
local->tx_handlers = ieee80211_tx_handlers;
local->bridge_packets = 1;
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
local->short_retry_limit = 7;
local->long_retry_limit = 4;
local->hw.conf.radio_enabled = 1;
local->enabled_modes = ~0;
INIT_LIST_HEAD(&local->modes_list);
INIT_LIST_HEAD(&local->interfaces);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work);
ieee80211_rx_bss_list_init(mdev);
sta_info_init(local);
mdev->hard_start_xmit = ieee80211_master_start_xmit;
mdev->open = ieee80211_master_open;
mdev->stop = ieee80211_master_stop;
mdev->type = ARPHRD_IEEE80211;
mdev->header_ops = &ieee80211_header_ops;
mdev->set_multicast_list = ieee80211_master_set_multicast_list;
sdata->type = IEEE80211_IF_TYPE_AP;
sdata->dev = mdev;
sdata->local = local;
sdata->u.ap.force_unicast_rateidx = -1;
sdata->u.ap.max_ratectrl_rateidx = -1;
ieee80211_if_sdata_init(sdata);
/* no RCU needed since we're still during init phase */
list_add_tail(&sdata->list, &local->interfaces);
tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
(unsigned long)local);
tasklet_disable(&local->tx_pending_tasklet);
tasklet_init(&local->tasklet,
ieee80211_tasklet_handler,
(unsigned long) local);
tasklet_disable(&local->tasklet);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
return local_to_hw(local);
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
const char *name;
int result;
result = wiphy_register(local->hw.wiphy);
if (result < 0)
return result;
name = wiphy_dev(local->hw.wiphy)->driver->name;
local->hw.workqueue = create_singlethread_workqueue(name);
if (!local->hw.workqueue) {
result = -ENOMEM;
goto fail_workqueue;
}
/*
* The hardware needs headroom for sending the frame,
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
sizeof(struct ieee80211_tx_status_rtap_hdr));
debugfs_hw_add(local);
local->hw.conf.beacon_int = 1000;
local->wstats_flags |= local->hw.max_rssi ?
IW_QUAL_LEVEL_UPDATED : IW_QUAL_LEVEL_INVALID;
local->wstats_flags |= local->hw.max_signal ?
IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
local->wstats_flags |= local->hw.max_noise ?
IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
if (local->hw.max_rssi < 0 || local->hw.max_noise < 0)
local->wstats_flags |= IW_QUAL_DBM;
result = sta_info_start(local);
if (result < 0)
goto fail_sta_info;
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
goto fail_dev;
memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
result = register_netdevice(local->mdev);
if (result < 0)
goto fail_dev;
ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP);
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize rate control "
"algorithm\n", wiphy_name(local->hw.wiphy));
goto fail_rate;
}
result = ieee80211_wep_init(local);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize wep\n",
wiphy_name(local->hw.wiphy));
goto fail_wep;
}
ieee80211_install_qdisc(local->mdev);
/* add one default STA interface */
result = ieee80211_if_add(local->mdev, "wlan%d", NULL,
IEEE80211_IF_TYPE_STA);
if (result)
printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
wiphy_name(local->hw.wiphy));
local->reg_state = IEEE80211_DEV_REGISTERED;
rtnl_unlock();
ieee80211_led_init(local);
return 0;
fail_wep:
rate_control_deinitialize(local);
fail_rate:
ieee80211_debugfs_remove_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
unregister_netdevice(local->mdev);
fail_dev:
rtnl_unlock();
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
destroy_workqueue(local->hw.workqueue);
fail_workqueue:
wiphy_unregister(local->hw.wiphy);
return result;
}
EXPORT_SYMBOL(ieee80211_register_hw);
int ieee80211_register_hwmode(struct ieee80211_hw *hw,
struct ieee80211_hw_mode *mode)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_rate *rate;
int i;
INIT_LIST_HEAD(&mode->list);
list_add_tail(&mode->list, &local->modes_list);
local->hw_modes |= (1 << mode->mode);
for (i = 0; i < mode->num_rates; i++) {
rate = &(mode->rates[i]);
rate->rate_inv = CHAN_UTIL_RATE_LCM / rate->rate;
}
ieee80211_prepare_rates(local, mode);
if (!local->oper_hw_mode) {
/* Default to this mode */
local->hw.conf.phymode = mode->mode;
local->oper_hw_mode = local->scan_hw_mode = mode;
local->oper_channel = local->scan_channel = &mode->channels[0];
local->hw.conf.mode = local->oper_hw_mode;
local->hw.conf.chan = local->oper_channel;
}
if (!(hw->flags & IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED))
ieee80211_set_default_regdomain(mode);
return 0;
}
EXPORT_SYMBOL(ieee80211_register_hwmode);
void ieee80211_unregister_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata, *tmp;
int i;
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
rtnl_lock();
BUG_ON(local->reg_state != IEEE80211_DEV_REGISTERED);
local->reg_state = IEEE80211_DEV_UNREGISTERED;
/*
* At this point, interface list manipulations are fine
* because the driver cannot be handing us frames any
* more and the tasklet is killed.
*/
/*
* First, we remove all non-master interfaces. Do this because they
* may have bss pointer dependency on the master, and when we free
* the master these would be freed as well, breaking our list
* iteration completely.
*/
list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
if (sdata->dev == local->mdev)
continue;
list_del(&sdata->list);
__ieee80211_if_del(local, sdata);
}
/* then, finally, remove the master interface */
__ieee80211_if_del(local, IEEE80211_DEV_TO_SUB_IF(local->mdev));
rtnl_unlock();
ieee80211_rx_bss_list_deinit(local->mdev);
ieee80211_clear_tx_pending(local);
sta_info_stop(local);
rate_control_deinitialize(local);
debugfs_hw_del(local);
for (i = 0; i < NUM_IEEE80211_MODES; i++) {
kfree(local->supp_rates[i]);
kfree(local->basic_rates[i]);
}
if (skb_queue_len(&local->skb_queue)
|| skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
wiphy_name(local->hw.wiphy));
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
destroy_workqueue(local->hw.workqueue);
wiphy_unregister(local->hw.wiphy);
ieee80211_wep_free(local);
ieee80211_led_exit(local);
}
EXPORT_SYMBOL(ieee80211_unregister_hw);
void ieee80211_free_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
ieee80211_if_free(local->mdev);
wiphy_free(local->hw.wiphy);
}
EXPORT_SYMBOL(ieee80211_free_hw);
static int __init ieee80211_init(void)
{
struct sk_buff *skb;
int ret;
BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
#ifdef CONFIG_MAC80211_RC_SIMPLE
ret = ieee80211_rate_control_register(&mac80211_rcsimple);
if (ret)
goto fail;
#endif
#ifdef CONFIG_MAC80211_RC_PID
ret = ieee80211_rate_control_register(&mac80211_rcpid);
if (ret)
goto fail;
#endif
ret = ieee80211_wme_register();
if (ret) {
printk(KERN_DEBUG "ieee80211_init: failed to "
"initialize WME (err=%d)\n", ret);
goto fail;
}
ieee80211_debugfs_netdev_init();
ieee80211_regdomain_init();
return 0;
fail:
#ifdef CONFIG_MAC80211_RC_SIMPLE
ieee80211_rate_control_unregister(&mac80211_rcsimple);
#endif
#ifdef CONFIG_MAC80211_RC_PID
ieee80211_rate_control_unregister(&mac80211_rcpid);
#endif
return ret;
}
static void __exit ieee80211_exit(void)
{
#ifdef CONFIG_MAC80211_RC_SIMPLE
ieee80211_rate_control_unregister(&mac80211_rcsimple);
#endif
#ifdef CONFIG_MAC80211_RC_PID
ieee80211_rate_control_unregister(&mac80211_rcpid);
#endif
ieee80211_wme_unregister();
ieee80211_debugfs_netdev_exit();
}
subsys_initcall(ieee80211_init);
module_exit(ieee80211_exit);
MODULE_DESCRIPTION("IEEE 802.11 subsystem");
MODULE_LICENSE("GPL");