| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle |
| * Copyright (C) 1999, 2000 Silicon Graphics, Inc. |
| * Copyright (C) 2001 MIPS Technologies, Inc. |
| */ |
| |
| #include <asm/asm.h> |
| #include <asm/asmmacro.h> |
| #include <asm/regdef.h> |
| #include <asm/mipsregs.h> |
| #include <asm/stackframe.h> |
| #include <asm/isadep.h> |
| #include <asm/thread_info.h> |
| #include <asm/war.h> |
| #ifdef CONFIG_MIPS_MT_SMTC |
| #include <asm/mipsmtregs.h> |
| #endif |
| |
| #ifndef CONFIG_PREEMPT |
| #define resume_kernel restore_all |
| #else |
| #define __ret_from_irq ret_from_exception |
| #endif |
| |
| .text |
| .align 5 |
| #ifndef CONFIG_PREEMPT |
| FEXPORT(ret_from_exception) |
| local_irq_disable # preempt stop |
| b __ret_from_irq |
| #endif |
| FEXPORT(ret_from_irq) |
| LONG_S s0, TI_REGS($28) |
| FEXPORT(__ret_from_irq) |
| LONG_L t0, PT_STATUS(sp) # returning to kernel mode? |
| andi t0, t0, KU_USER |
| beqz t0, resume_kernel |
| |
| resume_userspace: |
| local_irq_disable # make sure we dont miss an |
| # interrupt setting need_resched |
| # between sampling and return |
| LONG_L a2, TI_FLAGS($28) # current->work |
| andi t0, a2, _TIF_WORK_MASK # (ignoring syscall_trace) |
| bnez t0, work_pending |
| j restore_all |
| |
| #ifdef CONFIG_PREEMPT |
| resume_kernel: |
| local_irq_disable |
| lw t0, TI_PRE_COUNT($28) |
| bnez t0, restore_all |
| need_resched: |
| LONG_L t0, TI_FLAGS($28) |
| andi t1, t0, _TIF_NEED_RESCHED |
| beqz t1, restore_all |
| LONG_L t0, PT_STATUS(sp) # Interrupts off? |
| andi t0, 1 |
| beqz t0, restore_all |
| jal preempt_schedule_irq |
| b need_resched |
| #endif |
| |
| FEXPORT(ret_from_fork) |
| jal schedule_tail # a0 = struct task_struct *prev |
| |
| FEXPORT(syscall_exit) |
| local_irq_disable # make sure need_resched and |
| # signals dont change between |
| # sampling and return |
| LONG_L a2, TI_FLAGS($28) # current->work |
| li t0, _TIF_ALLWORK_MASK |
| and t0, a2, t0 |
| bnez t0, syscall_exit_work |
| |
| FEXPORT(restore_all) # restore full frame |
| #ifdef CONFIG_MIPS_MT_SMTC |
| #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP |
| /* Re-arm any temporarily masked interrupts not explicitly "acked" */ |
| mfc0 v0, CP0_TCSTATUS |
| ori v1, v0, TCSTATUS_IXMT |
| mtc0 v1, CP0_TCSTATUS |
| andi v0, TCSTATUS_IXMT |
| _ehb |
| mfc0 t0, CP0_TCCONTEXT |
| DMT 9 # dmt t1 |
| jal mips_ihb |
| mfc0 t2, CP0_STATUS |
| andi t3, t0, 0xff00 |
| or t2, t2, t3 |
| mtc0 t2, CP0_STATUS |
| _ehb |
| andi t1, t1, VPECONTROL_TE |
| beqz t1, 1f |
| EMT |
| 1: |
| mfc0 v1, CP0_TCSTATUS |
| /* We set IXMT above, XOR should clear it here */ |
| xori v1, v1, TCSTATUS_IXMT |
| or v1, v0, v1 |
| mtc0 v1, CP0_TCSTATUS |
| _ehb |
| xor t0, t0, t3 |
| mtc0 t0, CP0_TCCONTEXT |
| #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ |
| /* Detect and execute deferred IPI "interrupts" */ |
| LONG_L s0, TI_REGS($28) |
| LONG_S sp, TI_REGS($28) |
| jal deferred_smtc_ipi |
| LONG_S s0, TI_REGS($28) |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| .set noat |
| RESTORE_TEMP |
| RESTORE_AT |
| RESTORE_STATIC |
| FEXPORT(restore_partial) # restore partial frame |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| SAVE_STATIC |
| SAVE_AT |
| SAVE_TEMP |
| LONG_L v0, PT_STATUS(sp) |
| #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) |
| and v0, ST0_IEP |
| #else |
| and v0, ST0_IE |
| #endif |
| beqz v0, 1f |
| jal trace_hardirqs_on |
| b 2f |
| 1: jal trace_hardirqs_off |
| 2: |
| RESTORE_TEMP |
| RESTORE_AT |
| RESTORE_STATIC |
| #endif |
| RESTORE_SOME |
| RESTORE_SP_AND_RET |
| .set at |
| |
| work_pending: |
| andi t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS |
| beqz t0, work_notifysig |
| work_resched: |
| jal schedule |
| |
| local_irq_disable # make sure need_resched and |
| # signals dont change between |
| # sampling and return |
| LONG_L a2, TI_FLAGS($28) |
| andi t0, a2, _TIF_WORK_MASK # is there any work to be done |
| # other than syscall tracing? |
| beqz t0, restore_all |
| andi t0, a2, _TIF_NEED_RESCHED |
| bnez t0, work_resched |
| |
| work_notifysig: # deal with pending signals and |
| # notify-resume requests |
| move a0, sp |
| li a1, 0 |
| jal do_notify_resume # a2 already loaded |
| j resume_userspace |
| |
| FEXPORT(syscall_exit_work_partial) |
| SAVE_STATIC |
| syscall_exit_work: |
| li t0, _TIF_WORK_SYSCALL_EXIT |
| and t0, a2 # a2 is preloaded with TI_FLAGS |
| beqz t0, work_pending # trace bit set? |
| local_irq_enable # could let syscall_trace_leave() |
| # call schedule() instead |
| move a0, sp |
| jal syscall_trace_leave |
| b resume_userspace |
| |
| #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT) |
| |
| /* |
| * MIPS32R2 Instruction Hazard Barrier - must be called |
| * |
| * For C code use the inline version named instruction_hazard(). |
| */ |
| LEAF(mips_ihb) |
| .set mips32r2 |
| jr.hb ra |
| nop |
| END(mips_ihb) |
| |
| #endif /* CONFIG_CPU_MIPSR2 or CONFIG_MIPS_MT */ |
