| /* |
| * Written by: Garry Forsgren, Unisys Corporation |
| * Natalie Protasevich, Unisys Corporation |
| * This file contains the code to configure and interface |
| * with Unisys ES7000 series hardware system manager. |
| * |
| * Copyright (c) 2003 Unisys Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * Contact information: Unisys Corporation, Township Line & Union Meeting |
| * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or: |
| * |
| * http://www.unisys.com |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/smp.h> |
| #include <linux/string.h> |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <asm/io.h> |
| #include <asm/nmi.h> |
| #include <asm/smp.h> |
| #include <asm/apicdef.h> |
| #include "es7000.h" |
| |
| /* |
| * ES7000 Globals |
| */ |
| |
| volatile unsigned long *psai = NULL; |
| struct mip_reg *mip_reg; |
| struct mip_reg *host_reg; |
| int mip_port; |
| unsigned long mip_addr, host_addr; |
| |
| #if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) |
| |
| /* |
| * GSI override for ES7000 platforms. |
| */ |
| |
| static unsigned int base; |
| |
| static int |
| es7000_rename_gsi(int ioapic, int gsi) |
| { |
| if (!base) { |
| int i; |
| for (i = 0; i < nr_ioapics; i++) |
| base += nr_ioapic_registers[i]; |
| } |
| |
| if (!ioapic && (gsi < 16)) |
| gsi += base; |
| return gsi; |
| } |
| |
| #endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT) |
| |
| /* |
| * Parse the OEM Table |
| */ |
| |
| int __init |
| parse_unisys_oem (char *oemptr, int oem_entries) |
| { |
| int i; |
| int success = 0; |
| unsigned char type, size; |
| unsigned long val; |
| char *tp = NULL; |
| struct psai *psaip = NULL; |
| struct mip_reg_info *mi; |
| struct mip_reg *host, *mip; |
| |
| tp = oemptr; |
| |
| tp += 8; |
| |
| for (i=0; i <= oem_entries; i++) { |
| type = *tp++; |
| size = *tp++; |
| tp -= 2; |
| switch (type) { |
| case MIP_REG: |
| mi = (struct mip_reg_info *)tp; |
| val = MIP_RD_LO(mi->host_reg); |
| host_addr = val; |
| host = (struct mip_reg *)val; |
| host_reg = __va(host); |
| val = MIP_RD_LO(mi->mip_reg); |
| mip_port = MIP_PORT(mi->mip_info); |
| mip_addr = val; |
| mip = (struct mip_reg *)val; |
| mip_reg = __va(mip); |
| Dprintk("es7000_mipcfg: host_reg = 0x%lx \n", |
| (unsigned long)host_reg); |
| Dprintk("es7000_mipcfg: mip_reg = 0x%lx \n", |
| (unsigned long)mip_reg); |
| success++; |
| break; |
| case MIP_PSAI_REG: |
| psaip = (struct psai *)tp; |
| if (tp != NULL) { |
| if (psaip->addr) |
| psai = __va(psaip->addr); |
| else |
| psai = NULL; |
| success++; |
| } |
| break; |
| default: |
| break; |
| } |
| if (i == 6) break; |
| tp += size; |
| } |
| |
| if (success < 2) { |
| es7000_plat = 0; |
| } else { |
| printk("\nEnabling ES7000 specific features...\n"); |
| /* |
| * Determine the generation of the ES7000 currently running. |
| * |
| * es7000_plat = 0 if the machine is NOT a Unisys ES7000 box |
| * es7000_plat = 1 if the machine is a 5xx ES7000 box |
| * es7000_plat = 2 if the machine is a x86_64 ES7000 box |
| * |
| */ |
| if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) |
| es7000_plat = 2; |
| else |
| es7000_plat = 1; |
| |
| ioapic_renumber_irq = es7000_rename_gsi; |
| } |
| return es7000_plat; |
| } |
| |
| int __init |
| find_unisys_acpi_oem_table(unsigned long *oem_addr, int *length) |
| { |
| struct acpi_table_rsdp *rsdp = NULL; |
| unsigned long rsdp_phys = 0; |
| struct acpi_table_header *header = NULL; |
| int i; |
| struct acpi_table_sdt sdt; |
| |
| rsdp_phys = acpi_find_rsdp(); |
| rsdp = __va(rsdp_phys); |
| if (rsdp->rsdt_address) { |
| struct acpi_table_rsdt *mapped_rsdt = NULL; |
| sdt.pa = rsdp->rsdt_address; |
| |
| header = (struct acpi_table_header *) |
| __acpi_map_table(sdt.pa, sizeof(struct acpi_table_header)); |
| if (!header) |
| return -ENODEV; |
| |
| sdt.count = (header->length - sizeof(struct acpi_table_header)) >> 3; |
| mapped_rsdt = (struct acpi_table_rsdt *) |
| __acpi_map_table(sdt.pa, header->length); |
| if (!mapped_rsdt) |
| return -ENODEV; |
| |
| header = &mapped_rsdt->header; |
| |
| for (i = 0; i < sdt.count; i++) |
| sdt.entry[i].pa = (unsigned long) mapped_rsdt->entry[i]; |
| }; |
| for (i = 0; i < sdt.count; i++) { |
| |
| header = (struct acpi_table_header *) |
| __acpi_map_table(sdt.entry[i].pa, |
| sizeof(struct acpi_table_header)); |
| if (!header) |
| continue; |
| if (!strncmp((char *) &header->signature, "OEM1", 4)) { |
| if (!strncmp((char *) &header->oem_id, "UNISYS", 6)) { |
| void *addr; |
| struct oem_table *t; |
| acpi_table_print(header, sdt.entry[i].pa); |
| t = (struct oem_table *) __acpi_map_table(sdt.entry[i].pa, header->length); |
| addr = (void *) __acpi_map_table(t->OEMTableAddr, t->OEMTableSize); |
| *length = header->length; |
| *oem_addr = (unsigned long) addr; |
| return 0; |
| } |
| } |
| } |
| Dprintk("ES7000: did not find Unisys ACPI OEM table!\n"); |
| return -1; |
| } |
| |
| static void |
| es7000_spin(int n) |
| { |
| int i = 0; |
| |
| while (i++ < n) |
| rep_nop(); |
| } |
| |
| static int __init |
| es7000_mip_write(struct mip_reg *mip_reg) |
| { |
| int status = 0; |
| int spin; |
| |
| spin = MIP_SPIN; |
| while (((unsigned long long)host_reg->off_38 & |
| (unsigned long long)MIP_VALID) != 0) { |
| if (--spin <= 0) { |
| printk("es7000_mip_write: Timeout waiting for Host Valid Flag"); |
| return -1; |
| } |
| es7000_spin(MIP_SPIN); |
| } |
| |
| memcpy(host_reg, mip_reg, sizeof(struct mip_reg)); |
| outb(1, mip_port); |
| |
| spin = MIP_SPIN; |
| |
| while (((unsigned long long)mip_reg->off_38 & |
| (unsigned long long)MIP_VALID) == 0) { |
| if (--spin <= 0) { |
| printk("es7000_mip_write: Timeout waiting for MIP Valid Flag"); |
| return -1; |
| } |
| es7000_spin(MIP_SPIN); |
| } |
| |
| status = ((unsigned long long)mip_reg->off_0 & |
| (unsigned long long)0xffff0000000000ULL) >> 48; |
| mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 & |
| (unsigned long long)~MIP_VALID); |
| return status; |
| } |
| |
| int |
| es7000_start_cpu(int cpu, unsigned long eip) |
| { |
| unsigned long vect = 0, psaival = 0; |
| |
| if (psai == NULL) |
| return -1; |
| |
| vect = ((unsigned long)__pa(eip)/0x1000) << 16; |
| psaival = (0x1000000 | vect | cpu); |
| |
| while (*psai & 0x1000000) |
| ; |
| |
| *psai = psaival; |
| |
| return 0; |
| |
| } |
| |
| int |
| es7000_stop_cpu(int cpu) |
| { |
| int startup; |
| |
| if (psai == NULL) |
| return -1; |
| |
| startup= (0x1000000 | cpu); |
| |
| while ((*psai & 0xff00ffff) != startup) |
| ; |
| |
| startup = (*psai & 0xff0000) >> 16; |
| *psai &= 0xffffff; |
| |
| return 0; |
| |
| } |
| |
| void __init |
| es7000_sw_apic() |
| { |
| if (es7000_plat) { |
| int mip_status; |
| struct mip_reg es7000_mip_reg; |
| |
| printk("ES7000: Enabling APIC mode.\n"); |
| memset(&es7000_mip_reg, 0, sizeof(struct mip_reg)); |
| es7000_mip_reg.off_0 = MIP_SW_APIC; |
| es7000_mip_reg.off_38 = (MIP_VALID); |
| while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) |
| printk("es7000_sw_apic: command failed, status = %x\n", |
| mip_status); |
| return; |
| } |
| } |