| /* |
| * drivers/hwmon/lis3lv02d_i2c.c |
| * |
| * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. |
| * Driver is based on corresponding SPI driver written by Daniel Mack |
| * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ). |
| * |
| * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). |
| * |
| * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include "lis3lv02d.h" |
| |
| #define DRV_NAME "lis3lv02d_i2c" |
| |
| static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) |
| { |
| struct i2c_client *c = lis3->bus_priv; |
| return i2c_smbus_write_byte_data(c, reg, value); |
| } |
| |
| static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) |
| { |
| struct i2c_client *c = lis3->bus_priv; |
| *v = i2c_smbus_read_byte_data(c, reg); |
| return 0; |
| } |
| |
| static int lis3_i2c_init(struct lis3lv02d *lis3) |
| { |
| u8 reg; |
| int ret; |
| |
| /* power up the device */ |
| ret = lis3->read(lis3, CTRL_REG1, ®); |
| if (ret < 0) |
| return ret; |
| |
| reg |= CTRL1_PD0; |
| return lis3->write(lis3, CTRL_REG1, reg); |
| } |
| |
| /* Default axis mapping but it can be overwritten by platform data */ |
| static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X, |
| LIS3_DEV_Y, |
| LIS3_DEV_Z }; |
| |
| static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret = 0; |
| struct lis3lv02d_platform_data *pdata = client->dev.platform_data; |
| |
| if (pdata) { |
| if (pdata->axis_x) |
| lis3lv02d_axis_map.x = pdata->axis_x; |
| |
| if (pdata->axis_y) |
| lis3lv02d_axis_map.y = pdata->axis_y; |
| |
| if (pdata->axis_z) |
| lis3lv02d_axis_map.z = pdata->axis_z; |
| |
| if (pdata->setup_resources) |
| ret = pdata->setup_resources(); |
| |
| if (ret) |
| goto fail; |
| } |
| |
| lis3_dev.pdata = pdata; |
| lis3_dev.bus_priv = client; |
| lis3_dev.init = lis3_i2c_init; |
| lis3_dev.read = lis3_i2c_read; |
| lis3_dev.write = lis3_i2c_write; |
| lis3_dev.irq = client->irq; |
| lis3_dev.ac = lis3lv02d_axis_map; |
| |
| i2c_set_clientdata(client, &lis3_dev); |
| ret = lis3lv02d_init_device(&lis3_dev); |
| fail: |
| return ret; |
| } |
| |
| static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) |
| { |
| struct lis3lv02d *lis3 = i2c_get_clientdata(client); |
| struct lis3lv02d_platform_data *pdata = client->dev.platform_data; |
| |
| if (pdata && pdata->release_resources) |
| pdata->release_resources(); |
| |
| lis3lv02d_joystick_disable(); |
| lis3lv02d_poweroff(lis3); |
| |
| return lis3lv02d_remove_fs(&lis3_dev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) |
| { |
| struct lis3lv02d *lis3 = i2c_get_clientdata(client); |
| |
| if (!lis3->pdata || !lis3->pdata->wakeup_flags) |
| lis3lv02d_poweroff(lis3); |
| return 0; |
| } |
| |
| static int lis3lv02d_i2c_resume(struct i2c_client *client) |
| { |
| struct lis3lv02d *lis3 = i2c_get_clientdata(client); |
| |
| if (!lis3->pdata || !lis3->pdata->wakeup_flags) |
| lis3lv02d_poweron(lis3); |
| return 0; |
| } |
| |
| static void lis3lv02d_i2c_shutdown(struct i2c_client *client) |
| { |
| lis3lv02d_i2c_suspend(client, PMSG_SUSPEND); |
| } |
| #else |
| #define lis3lv02d_i2c_suspend NULL |
| #define lis3lv02d_i2c_resume NULL |
| #define lis3lv02d_i2c_shutdown NULL |
| #endif |
| |
| static const struct i2c_device_id lis3lv02d_id[] = { |
| {"lis3lv02d", 0 }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); |
| |
| static struct i2c_driver lis3lv02d_i2c_driver = { |
| .driver = { |
| .name = DRV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| .suspend = lis3lv02d_i2c_suspend, |
| .shutdown = lis3lv02d_i2c_shutdown, |
| .resume = lis3lv02d_i2c_resume, |
| .probe = lis3lv02d_i2c_probe, |
| .remove = __devexit_p(lis3lv02d_i2c_remove), |
| .id_table = lis3lv02d_id, |
| }; |
| |
| static int __init lis3lv02d_init(void) |
| { |
| return i2c_add_driver(&lis3lv02d_i2c_driver); |
| } |
| |
| static void __exit lis3lv02d_exit(void) |
| { |
| i2c_del_driver(&lis3lv02d_i2c_driver); |
| } |
| |
| MODULE_AUTHOR("Nokia Corporation"); |
| MODULE_DESCRIPTION("lis3lv02d I2C interface"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(lis3lv02d_init); |
| module_exit(lis3lv02d_exit); |