| /****************************************************************************** |
| * |
| * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. |
| * |
| * Portions of this file are derived from the ipw3945 project, as well |
| * as portions of the ieee80211 subsystem header files. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/slab.h> |
| #include <net/mac80211.h> |
| #include <asm/unaligned.h> |
| #include "iwl-eeprom.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-sta.h" |
| #include "iwl-io.h" |
| #include "iwl-calib.h" |
| #include "iwl-helpers.h" |
| /************************** RX-FUNCTIONS ****************************/ |
| /* |
| * Rx theory of operation |
| * |
| * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), |
| * each of which point to Receive Buffers to be filled by the NIC. These get |
| * used not only for Rx frames, but for any command response or notification |
| * from the NIC. The driver and NIC manage the Rx buffers by means |
| * of indexes into the circular buffer. |
| * |
| * Rx Queue Indexes |
| * The host/firmware share two index registers for managing the Rx buffers. |
| * |
| * The READ index maps to the first position that the firmware may be writing |
| * to -- the driver can read up to (but not including) this position and get |
| * good data. |
| * The READ index is managed by the firmware once the card is enabled. |
| * |
| * The WRITE index maps to the last position the driver has read from -- the |
| * position preceding WRITE is the last slot the firmware can place a packet. |
| * |
| * The queue is empty (no good data) if WRITE = READ - 1, and is full if |
| * WRITE = READ. |
| * |
| * During initialization, the host sets up the READ queue position to the first |
| * INDEX position, and WRITE to the last (READ - 1 wrapped) |
| * |
| * When the firmware places a packet in a buffer, it will advance the READ index |
| * and fire the RX interrupt. The driver can then query the READ index and |
| * process as many packets as possible, moving the WRITE index forward as it |
| * resets the Rx queue buffers with new memory. |
| * |
| * The management in the driver is as follows: |
| * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When |
| * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled |
| * to replenish the iwl->rxq->rx_free. |
| * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the |
| * iwl->rxq is replenished and the READ INDEX is updated (updating the |
| * 'processed' and 'read' driver indexes as well) |
| * + A received packet is processed and handed to the kernel network stack, |
| * detached from the iwl->rxq. The driver 'processed' index is updated. |
| * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free |
| * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ |
| * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there |
| * were enough free buffers and RX_STALLED is set it is cleared. |
| * |
| * |
| * Driver sequence: |
| * |
| * iwl_rx_queue_alloc() Allocates rx_free |
| * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls |
| * iwl_rx_queue_restock |
| * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx |
| * queue, updates firmware pointers, and updates |
| * the WRITE index. If insufficient rx_free buffers |
| * are available, schedules iwl_rx_replenish |
| * |
| * -- enable interrupts -- |
| * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the |
| * READ INDEX, detaching the SKB from the pool. |
| * Moves the packet buffer from queue to rx_used. |
| * Calls iwl_rx_queue_restock to refill any empty |
| * slots. |
| * ... |
| * |
| */ |
| |
| /** |
| * iwl_rx_queue_space - Return number of free slots available in queue. |
| */ |
| int iwl_rx_queue_space(const struct iwl_rx_queue *q) |
| { |
| int s = q->read - q->write; |
| if (s <= 0) |
| s += RX_QUEUE_SIZE; |
| /* keep some buffer to not confuse full and empty queue */ |
| s -= 2; |
| if (s < 0) |
| s = 0; |
| return s; |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_space); |
| |
| /** |
| * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue |
| */ |
| void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q) |
| { |
| unsigned long flags; |
| u32 rx_wrt_ptr_reg = priv->hw_params.rx_wrt_ptr_reg; |
| u32 reg; |
| |
| spin_lock_irqsave(&q->lock, flags); |
| |
| if (q->need_update == 0) |
| goto exit_unlock; |
| |
| /* If power-saving is in use, make sure device is awake */ |
| if (test_bit(STATUS_POWER_PMI, &priv->status)) { |
| reg = iwl_read32(priv, CSR_UCODE_DRV_GP1); |
| |
| if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { |
| IWL_DEBUG_INFO(priv, "Rx queue requesting wakeup, GP1 = 0x%x\n", |
| reg); |
| iwl_set_bit(priv, CSR_GP_CNTRL, |
| CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); |
| goto exit_unlock; |
| } |
| |
| q->write_actual = (q->write & ~0x7); |
| iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual); |
| |
| /* Else device is assumed to be awake */ |
| } else { |
| /* Device expects a multiple of 8 */ |
| q->write_actual = (q->write & ~0x7); |
| iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual); |
| } |
| |
| q->need_update = 0; |
| |
| exit_unlock: |
| spin_unlock_irqrestore(&q->lock, flags); |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr); |
| |
| int iwl_rx_queue_alloc(struct iwl_priv *priv) |
| { |
| struct iwl_rx_queue *rxq = &priv->rxq; |
| struct device *dev = &priv->pci_dev->dev; |
| int i; |
| |
| spin_lock_init(&rxq->lock); |
| INIT_LIST_HEAD(&rxq->rx_free); |
| INIT_LIST_HEAD(&rxq->rx_used); |
| |
| /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */ |
| rxq->bd = dma_alloc_coherent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr, |
| GFP_KERNEL); |
| if (!rxq->bd) |
| goto err_bd; |
| |
| rxq->rb_stts = dma_alloc_coherent(dev, sizeof(struct iwl_rb_status), |
| &rxq->rb_stts_dma, GFP_KERNEL); |
| if (!rxq->rb_stts) |
| goto err_rb; |
| |
| /* Fill the rx_used queue with _all_ of the Rx buffers */ |
| for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) |
| list_add_tail(&rxq->pool[i].list, &rxq->rx_used); |
| |
| /* Set us so that we have processed and used all buffers, but have |
| * not restocked the Rx queue with fresh buffers */ |
| rxq->read = rxq->write = 0; |
| rxq->write_actual = 0; |
| rxq->free_count = 0; |
| rxq->need_update = 0; |
| return 0; |
| |
| err_rb: |
| dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, |
| rxq->dma_addr); |
| err_bd: |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL(iwl_rx_queue_alloc); |
| |
| void iwl_rx_missed_beacon_notif(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_missed_beacon_notif *missed_beacon; |
| |
| missed_beacon = &pkt->u.missed_beacon; |
| if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > |
| priv->missed_beacon_threshold) { |
| IWL_DEBUG_CALIB(priv, "missed bcn cnsq %d totl %d rcd %d expctd %d\n", |
| le32_to_cpu(missed_beacon->consecutive_missed_beacons), |
| le32_to_cpu(missed_beacon->total_missed_becons), |
| le32_to_cpu(missed_beacon->num_recvd_beacons), |
| le32_to_cpu(missed_beacon->num_expected_beacons)); |
| if (!test_bit(STATUS_SCANNING, &priv->status)) |
| iwl_init_sensitivity(priv); |
| } |
| } |
| EXPORT_SYMBOL(iwl_rx_missed_beacon_notif); |
| |
| void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif); |
| |
| if (!report->state) { |
| IWL_DEBUG_11H(priv, |
| "Spectrum Measure Notification: Start\n"); |
| return; |
| } |
| |
| memcpy(&priv->measure_report, report, sizeof(*report)); |
| priv->measurement_status |= MEASUREMENT_READY; |
| } |
| EXPORT_SYMBOL(iwl_rx_spectrum_measure_notif); |
| |
| |
| |
| /* Calculate noise level, based on measurements during network silence just |
| * before arriving beacon. This measurement can be done only if we know |
| * exactly when to expect beacons, therefore only when we're associated. */ |
| static void iwl_rx_calc_noise(struct iwl_priv *priv) |
| { |
| struct statistics_rx_non_phy *rx_info |
| = &(priv->statistics.rx.general); |
| int num_active_rx = 0; |
| int total_silence = 0; |
| int bcn_silence_a = |
| le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; |
| int bcn_silence_b = |
| le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; |
| int bcn_silence_c = |
| le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; |
| int last_rx_noise; |
| |
| if (bcn_silence_a) { |
| total_silence += bcn_silence_a; |
| num_active_rx++; |
| } |
| if (bcn_silence_b) { |
| total_silence += bcn_silence_b; |
| num_active_rx++; |
| } |
| if (bcn_silence_c) { |
| total_silence += bcn_silence_c; |
| num_active_rx++; |
| } |
| |
| /* Average among active antennas */ |
| if (num_active_rx) |
| last_rx_noise = (total_silence / num_active_rx) - 107; |
| else |
| last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; |
| |
| IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n", |
| bcn_silence_a, bcn_silence_b, bcn_silence_c, |
| last_rx_noise); |
| } |
| |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| /* |
| * based on the assumption of all statistics counter are in DWORD |
| * FIXME: This function is for debugging, do not deal with |
| * the case of counters roll-over. |
| */ |
| static void iwl_accumulative_statistics(struct iwl_priv *priv, |
| __le32 *stats) |
| { |
| int i; |
| __le32 *prev_stats; |
| u32 *accum_stats; |
| u32 *delta, *max_delta; |
| |
| prev_stats = (__le32 *)&priv->statistics; |
| accum_stats = (u32 *)&priv->accum_statistics; |
| delta = (u32 *)&priv->delta_statistics; |
| max_delta = (u32 *)&priv->max_delta; |
| |
| for (i = sizeof(__le32); i < sizeof(struct iwl_notif_statistics); |
| i += sizeof(__le32), stats++, prev_stats++, delta++, |
| max_delta++, accum_stats++) { |
| if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { |
| *delta = (le32_to_cpu(*stats) - |
| le32_to_cpu(*prev_stats)); |
| *accum_stats += *delta; |
| if (*delta > *max_delta) |
| *max_delta = *delta; |
| } |
| } |
| |
| /* reset accumulative statistics for "no-counter" type statistics */ |
| priv->accum_statistics.general.temperature = |
| priv->statistics.general.temperature; |
| priv->accum_statistics.general.temperature_m = |
| priv->statistics.general.temperature_m; |
| priv->accum_statistics.general.ttl_timestamp = |
| priv->statistics.general.ttl_timestamp; |
| priv->accum_statistics.tx.tx_power.ant_a = |
| priv->statistics.tx.tx_power.ant_a; |
| priv->accum_statistics.tx.tx_power.ant_b = |
| priv->statistics.tx.tx_power.ant_b; |
| priv->accum_statistics.tx.tx_power.ant_c = |
| priv->statistics.tx.tx_power.ant_c; |
| } |
| #endif |
| |
| #define REG_RECALIB_PERIOD (60) |
| |
| /** |
| * iwl_good_plcp_health - checks for plcp error. |
| * |
| * When the plcp error is exceeding the thresholds, reset the radio |
| * to improve the throughput. |
| */ |
| bool iwl_good_plcp_health(struct iwl_priv *priv, |
| struct iwl_rx_packet *pkt) |
| { |
| bool rc = true; |
| int combined_plcp_delta; |
| unsigned int plcp_msec; |
| unsigned long plcp_received_jiffies; |
| |
| /* |
| * check for plcp_err and trigger radio reset if it exceeds |
| * the plcp error threshold plcp_delta. |
| */ |
| plcp_received_jiffies = jiffies; |
| plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies - |
| (long) priv->plcp_jiffies); |
| priv->plcp_jiffies = plcp_received_jiffies; |
| /* |
| * check to make sure plcp_msec is not 0 to prevent division |
| * by zero. |
| */ |
| if (plcp_msec) { |
| combined_plcp_delta = |
| (le32_to_cpu(pkt->u.stats.rx.ofdm.plcp_err) - |
| le32_to_cpu(priv->statistics.rx.ofdm.plcp_err)) + |
| (le32_to_cpu(pkt->u.stats.rx.ofdm_ht.plcp_err) - |
| le32_to_cpu(priv->statistics.rx.ofdm_ht.plcp_err)); |
| |
| if ((combined_plcp_delta > 0) && |
| ((combined_plcp_delta * 100) / plcp_msec) > |
| priv->cfg->plcp_delta_threshold) { |
| /* |
| * if plcp_err exceed the threshold, |
| * the following data is printed in csv format: |
| * Text: plcp_err exceeded %d, |
| * Received ofdm.plcp_err, |
| * Current ofdm.plcp_err, |
| * Received ofdm_ht.plcp_err, |
| * Current ofdm_ht.plcp_err, |
| * combined_plcp_delta, |
| * plcp_msec |
| */ |
| IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, " |
| "%u, %u, %u, %u, %d, %u mSecs\n", |
| priv->cfg->plcp_delta_threshold, |
| le32_to_cpu(pkt->u.stats.rx.ofdm.plcp_err), |
| le32_to_cpu(priv->statistics.rx.ofdm.plcp_err), |
| le32_to_cpu(pkt->u.stats.rx.ofdm_ht.plcp_err), |
| le32_to_cpu( |
| priv->statistics.rx.ofdm_ht.plcp_err), |
| combined_plcp_delta, plcp_msec); |
| rc = false; |
| } |
| } |
| return rc; |
| } |
| EXPORT_SYMBOL(iwl_good_plcp_health); |
| |
| void iwl_recover_from_statistics(struct iwl_priv *priv, |
| struct iwl_rx_packet *pkt) |
| { |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| return; |
| if (iwl_is_associated(priv)) { |
| if (priv->cfg->ops->lib->check_ack_health) { |
| if (!priv->cfg->ops->lib->check_ack_health( |
| priv, pkt)) { |
| /* |
| * low ack count detected |
| * restart Firmware |
| */ |
| IWL_ERR(priv, "low ack count detected, " |
| "restart firmware\n"); |
| if (!iwl_force_reset(priv, IWL_FW_RESET)) |
| return; |
| } |
| } |
| if (priv->cfg->ops->lib->check_plcp_health) { |
| if (!priv->cfg->ops->lib->check_plcp_health( |
| priv, pkt)) { |
| /* |
| * high plcp error detected |
| * reset Radio |
| */ |
| iwl_force_reset(priv, IWL_RF_RESET); |
| } |
| } |
| } |
| } |
| EXPORT_SYMBOL(iwl_recover_from_statistics); |
| |
| void iwl_rx_statistics(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| int change; |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| |
| |
| IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n", |
| (int)sizeof(priv->statistics), |
| le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK); |
| |
| change = ((priv->statistics.general.temperature != |
| pkt->u.stats.general.temperature) || |
| ((priv->statistics.flag & |
| STATISTICS_REPLY_FLG_HT40_MODE_MSK) != |
| (pkt->u.stats.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK))); |
| |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats); |
| #endif |
| iwl_recover_from_statistics(priv, pkt); |
| |
| memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics)); |
| |
| set_bit(STATUS_STATISTICS, &priv->status); |
| |
| /* Reschedule the statistics timer to occur in |
| * REG_RECALIB_PERIOD seconds to ensure we get a |
| * thermal update even if the uCode doesn't give |
| * us one */ |
| mod_timer(&priv->statistics_periodic, jiffies + |
| msecs_to_jiffies(REG_RECALIB_PERIOD * 1000)); |
| |
| if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && |
| (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { |
| iwl_rx_calc_noise(priv); |
| queue_work(priv->workqueue, &priv->run_time_calib_work); |
| } |
| if (priv->cfg->ops->lib->temp_ops.temperature && change) |
| priv->cfg->ops->lib->temp_ops.temperature(priv); |
| } |
| EXPORT_SYMBOL(iwl_rx_statistics); |
| |
| void iwl_reply_statistics(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| |
| if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATISTICS_CLEAR_MSK) { |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| memset(&priv->accum_statistics, 0, |
| sizeof(struct iwl_notif_statistics)); |
| memset(&priv->delta_statistics, 0, |
| sizeof(struct iwl_notif_statistics)); |
| memset(&priv->max_delta, 0, |
| sizeof(struct iwl_notif_statistics)); |
| #endif |
| IWL_DEBUG_RX(priv, "Statistics have been cleared\n"); |
| } |
| iwl_rx_statistics(priv, rxb); |
| } |
| EXPORT_SYMBOL(iwl_reply_statistics); |
| |
| /* |
| * returns non-zero if packet should be dropped |
| */ |
| int iwl_set_decrypted_flag(struct iwl_priv *priv, |
| struct ieee80211_hdr *hdr, |
| u32 decrypt_res, |
| struct ieee80211_rx_status *stats) |
| { |
| u16 fc = le16_to_cpu(hdr->frame_control); |
| |
| if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) |
| return 0; |
| |
| if (!(fc & IEEE80211_FCTL_PROTECTED)) |
| return 0; |
| |
| IWL_DEBUG_RX(priv, "decrypt_res:0x%x\n", decrypt_res); |
| switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { |
| case RX_RES_STATUS_SEC_TYPE_TKIP: |
| /* The uCode has got a bad phase 1 Key, pushes the packet. |
| * Decryption will be done in SW. */ |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_BAD_KEY_TTAK) |
| break; |
| |
| case RX_RES_STATUS_SEC_TYPE_WEP: |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_BAD_ICV_MIC) { |
| /* bad ICV, the packet is destroyed since the |
| * decryption is inplace, drop it */ |
| IWL_DEBUG_RX(priv, "Packet destroyed\n"); |
| return -1; |
| } |
| case RX_RES_STATUS_SEC_TYPE_CCMP: |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_DECRYPT_OK) { |
| IWL_DEBUG_RX(priv, "hw decrypt successfully!!!\n"); |
| stats->flag |= RX_FLAG_DECRYPTED; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(iwl_set_decrypted_flag); |