| /* |
| * Workbit NinjaSCSI-32Bi/UDE PCI/CardBus SCSI Host Bus Adapter driver |
| * Basic data header |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _NSP32_H |
| #define _NSP32_H |
| |
| #include <linux/version.h> |
| //#define NSP32_DEBUG 9 |
| |
| /* |
| * VENDOR/DEVICE ID |
| */ |
| #define PCI_VENDOR_ID_IODATA 0x10fc |
| #define PCI_VENDOR_ID_WORKBIT 0x1145 |
| |
| #define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II 0x0005 |
| #define PCI_DEVICE_ID_NINJASCSI_32BI_KME 0xf007 |
| #define PCI_DEVICE_ID_NINJASCSI_32BI_WBT 0x8007 |
| #define PCI_DEVICE_ID_WORKBIT_STANDARD 0xf010 |
| #define PCI_DEVICE_ID_WORKBIT_DUALEDGE 0xf011 |
| #define PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC 0xf012 |
| #define PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC 0xf013 |
| #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO 0xf015 |
| #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II 0x8009 |
| |
| /* |
| * MODEL |
| */ |
| enum { |
| MODEL_IODATA = 0, |
| MODEL_KME = 1, |
| MODEL_WORKBIT = 2, |
| MODEL_LOGITEC = 3, |
| MODEL_PCI_WORKBIT = 4, |
| MODEL_PCI_LOGITEC = 5, |
| MODEL_PCI_MELCO = 6, |
| }; |
| |
| static char * nsp32_model[] = { |
| "I-O DATA CBSC-II CardBus card", |
| "KME SCSI CardBus card", |
| "Workbit duo SCSI CardBus card", |
| "Logitec CardBus card with external ROM", |
| "Workbit / I-O DATA PCI card", |
| "Logitec PCI card with external ROM", |
| "Melco CardBus/PCI card with external ROM", |
| }; |
| |
| |
| /* |
| * SCSI Generic Definitions |
| */ |
| #define EXTENDED_SDTR_LEN 0x03 |
| |
| /* Little Endian */ |
| typedef u32 u32_le; |
| typedef u16 u16_le; |
| |
| /* |
| * BASIC Definitions |
| */ |
| #ifndef TRUE |
| # define TRUE 1 |
| #endif |
| #ifndef FALSE |
| # define FALSE 0 |
| #endif |
| #define ASSERT 1 |
| #define NEGATE 0 |
| |
| |
| /*******************/ |
| /* normal register */ |
| /*******************/ |
| /* |
| * Don't access below register with Double Word: |
| * +00, +04, +08, +0c, +64, +80, +84, +88, +90, +c4, +c8, +cc, +d0. |
| */ |
| #define IRQ_CONTROL 0x00 /* BASE+00, W, W */ |
| #define IRQ_STATUS 0x00 /* BASE+00, W, R */ |
| # define IRQSTATUS_LATCHED_MSG BIT(0) |
| # define IRQSTATUS_LATCHED_IO BIT(1) |
| # define IRQSTATUS_LATCHED_CD BIT(2) |
| # define IRQSTATUS_LATCHED_BUS_FREE BIT(3) |
| # define IRQSTATUS_RESELECT_OCCUER BIT(4) |
| # define IRQSTATUS_PHASE_CHANGE_IRQ BIT(5) |
| # define IRQSTATUS_SCSIRESET_IRQ BIT(6) |
| # define IRQSTATUS_TIMER_IRQ BIT(7) |
| # define IRQSTATUS_FIFO_SHLD_IRQ BIT(8) |
| # define IRQSTATUS_PCI_IRQ BIT(9) |
| # define IRQSTATUS_BMCNTERR_IRQ BIT(10) |
| # define IRQSTATUS_AUTOSCSI_IRQ BIT(11) |
| # define PCI_IRQ_MASK BIT(12) |
| # define TIMER_IRQ_MASK BIT(13) |
| # define FIFO_IRQ_MASK BIT(14) |
| # define SCSI_IRQ_MASK BIT(15) |
| # define IRQ_CONTROL_ALL_IRQ_MASK (PCI_IRQ_MASK | \ |
| TIMER_IRQ_MASK | \ |
| FIFO_IRQ_MASK | \ |
| SCSI_IRQ_MASK ) |
| # define IRQSTATUS_ANY_IRQ (IRQSTATUS_RESELECT_OCCUER | \ |
| IRQSTATUS_PHASE_CHANGE_IRQ | \ |
| IRQSTATUS_SCSIRESET_IRQ | \ |
| IRQSTATUS_TIMER_IRQ | \ |
| IRQSTATUS_FIFO_SHLD_IRQ | \ |
| IRQSTATUS_PCI_IRQ | \ |
| IRQSTATUS_BMCNTERR_IRQ | \ |
| IRQSTATUS_AUTOSCSI_IRQ ) |
| |
| #define TRANSFER_CONTROL 0x02 /* BASE+02, W, W */ |
| #define TRANSFER_STATUS 0x02 /* BASE+02, W, R */ |
| # define CB_MMIO_MODE BIT(0) |
| # define CB_IO_MODE BIT(1) |
| # define BM_TEST BIT(2) |
| # define BM_TEST_DIR BIT(3) |
| # define DUAL_EDGE_ENABLE BIT(4) |
| # define NO_TRANSFER_TO_HOST BIT(5) |
| # define TRANSFER_GO BIT(7) |
| # define BLIEND_MODE BIT(8) |
| # define BM_START BIT(9) |
| # define ADVANCED_BM_WRITE BIT(10) |
| # define BM_SINGLE_MODE BIT(11) |
| # define FIFO_TRUE_FULL BIT(12) |
| # define FIFO_TRUE_EMPTY BIT(13) |
| # define ALL_COUNTER_CLR BIT(14) |
| # define FIFOTEST BIT(15) |
| |
| #define INDEX_REG 0x04 /* BASE+04, Byte(R/W), Word(R) */ |
| |
| #define TIMER_SET 0x06 /* BASE+06, W, R/W */ |
| # define TIMER_CNT_MASK (0xff) |
| # define TIMER_STOP BIT(8) |
| |
| #define DATA_REG_LOW 0x08 /* BASE+08, LowW, R/W */ |
| #define DATA_REG_HI 0x0a /* BASE+0a, Hi-W, R/W */ |
| |
| #define FIFO_REST_CNT 0x0c /* BASE+0c, W, R/W */ |
| # define FIFO_REST_MASK 0x1ff |
| # define FIFO_EMPTY_SHLD_FLAG BIT(14) |
| # define FIFO_FULL_SHLD_FLAG BIT(15) |
| |
| #define SREQ_SMPL_RATE 0x0f /* BASE+0f, B, R/W */ |
| # define SREQSMPLRATE_RATE0 BIT(0) |
| # define SREQSMPLRATE_RATE1 BIT(1) |
| # define SAMPLING_ENABLE BIT(2) |
| # define SMPL_40M (0) /* 40MHz: 0-100ns/period */ |
| # define SMPL_20M (SREQSMPLRATE_RATE0) /* 20MHz: 100-200ns/period */ |
| # define SMPL_10M (SREQSMPLRATE_RATE1) /* 10Mhz: 200- ns/period */ |
| |
| #define SCSI_BUS_CONTROL 0x10 /* BASE+10, B, R/W */ |
| # define BUSCTL_SEL BIT(0) |
| # define BUSCTL_RST BIT(1) |
| # define BUSCTL_DATAOUT_ENB BIT(2) |
| # define BUSCTL_ATN BIT(3) |
| # define BUSCTL_ACK BIT(4) |
| # define BUSCTL_BSY BIT(5) |
| # define AUTODIRECTION BIT(6) |
| # define ACKENB BIT(7) |
| |
| #define CLR_COUNTER 0x12 /* BASE+12, B, W */ |
| # define ACK_COUNTER_CLR BIT(0) |
| # define SREQ_COUNTER_CLR BIT(1) |
| # define FIFO_HOST_POINTER_CLR BIT(2) |
| # define FIFO_REST_COUNT_CLR BIT(3) |
| # define BM_COUNTER_CLR BIT(4) |
| # define SAVED_ACK_CLR BIT(5) |
| # define CLRCOUNTER_ALLMASK (ACK_COUNTER_CLR | \ |
| SREQ_COUNTER_CLR | \ |
| FIFO_HOST_POINTER_CLR | \ |
| FIFO_REST_COUNT_CLR | \ |
| BM_COUNTER_CLR | \ |
| SAVED_ACK_CLR ) |
| |
| #define SCSI_BUS_MONITOR 0x12 /* BASE+12, B, R */ |
| # define BUSMON_MSG BIT(0) |
| # define BUSMON_IO BIT(1) |
| # define BUSMON_CD BIT(2) |
| # define BUSMON_BSY BIT(3) |
| # define BUSMON_ACK BIT(4) |
| # define BUSMON_REQ BIT(5) |
| # define BUSMON_SEL BIT(6) |
| # define BUSMON_ATN BIT(7) |
| |
| #define COMMAND_DATA 0x14 /* BASE+14, B, R/W */ |
| |
| #define PARITY_CONTROL 0x16 /* BASE+16, B, W */ |
| # define PARITY_CHECK_ENABLE BIT(0) |
| # define PARITY_ERROR_CLEAR BIT(1) |
| #define PARITY_STATUS 0x16 /* BASE+16, B, R */ |
| //# define PARITY_CHECK_ENABLE BIT(0) |
| # define PARITY_ERROR_NORMAL BIT(1) |
| # define PARITY_ERROR_LSB BIT(1) |
| # define PARITY_ERROR_MSB BIT(2) |
| |
| #define RESELECT_ID 0x18 /* BASE+18, B, R */ |
| |
| #define COMMAND_CONTROL 0x18 /* BASE+18, W, W */ |
| # define CLEAR_CDB_FIFO_POINTER BIT(0) |
| # define AUTO_COMMAND_PHASE BIT(1) |
| # define AUTOSCSI_START BIT(2) |
| # define AUTOSCSI_RESTART BIT(3) |
| # define AUTO_PARAMETER BIT(4) |
| # define AUTO_ATN BIT(5) |
| # define AUTO_MSGIN_00_OR_04 BIT(6) |
| # define AUTO_MSGIN_02 BIT(7) |
| # define AUTO_MSGIN_03 BIT(8) |
| |
| #define SET_ARBIT 0x1a /* BASE+1a, B, W */ |
| # define ARBIT_GO BIT(0) |
| # define ARBIT_CLEAR BIT(1) |
| |
| #define ARBIT_STATUS 0x1a /* BASE+1a, B, R */ |
| //# define ARBIT_GO BIT(0) |
| # define ARBIT_WIN BIT(1) |
| # define ARBIT_FAIL BIT(2) |
| # define AUTO_PARAMETER_VALID BIT(3) |
| # define SGT_VALID BIT(4) |
| |
| #define SYNC_REG 0x1c /* BASE+1c, B, R/W */ |
| |
| #define ACK_WIDTH 0x1d /* BASE+1d, B, R/W */ |
| |
| #define SCSI_DATA_WITH_ACK 0x20 /* BASE+20, B, R/W */ |
| #define SCSI_OUT_LATCH_TARGET_ID 0x22 /* BASE+22, B, W */ |
| #define SCSI_DATA_IN 0x22 /* BASE+22, B, R */ |
| |
| #define SCAM_CONTROL 0x24 /* BASE+24, B, W */ |
| #define SCAM_STATUS 0x24 /* BASE+24, B, R */ |
| # define SCAM_MSG BIT(0) |
| # define SCAM_IO BIT(1) |
| # define SCAM_CD BIT(2) |
| # define SCAM_BSY BIT(3) |
| # define SCAM_SEL BIT(4) |
| # define SCAM_XFEROK BIT(5) |
| |
| #define SCAM_DATA 0x26 /* BASE+26, B, R/W */ |
| # define SD0 BIT(0) |
| # define SD1 BIT(1) |
| # define SD2 BIT(2) |
| # define SD3 BIT(3) |
| # define SD4 BIT(4) |
| # define SD5 BIT(5) |
| # define SD6 BIT(6) |
| # define SD7 BIT(7) |
| |
| #define SACK_CNT 0x28 /* BASE+28, DW, R/W */ |
| #define SREQ_CNT 0x2c /* BASE+2c, DW, R/W */ |
| |
| #define FIFO_DATA_LOW 0x30 /* BASE+30, B/W/DW, R/W */ |
| #define FIFO_DATA_HIGH 0x32 /* BASE+32, B/W, R/W */ |
| #define BM_START_ADR 0x34 /* BASE+34, DW, R/W */ |
| |
| #define BM_CNT 0x38 /* BASE+38, DW, R/W */ |
| # define BM_COUNT_MASK 0x0001ffffUL |
| # define SGTEND BIT(31) /* Last SGT marker */ |
| |
| #define SGT_ADR 0x3c /* BASE+3c, DW, R/W */ |
| #define WAIT_REG 0x40 /* Bi only */ |
| |
| #define SCSI_EXECUTE_PHASE 0x40 /* BASE+40, W, R */ |
| # define COMMAND_PHASE BIT(0) |
| # define DATA_IN_PHASE BIT(1) |
| # define DATA_OUT_PHASE BIT(2) |
| # define MSGOUT_PHASE BIT(3) |
| # define STATUS_PHASE BIT(4) |
| # define ILLEGAL_PHASE BIT(5) |
| # define BUS_FREE_OCCUER BIT(6) |
| # define MSG_IN_OCCUER BIT(7) |
| # define MSG_OUT_OCCUER BIT(8) |
| # define SELECTION_TIMEOUT BIT(9) |
| # define MSGIN_00_VALID BIT(10) |
| # define MSGIN_02_VALID BIT(11) |
| # define MSGIN_03_VALID BIT(12) |
| # define MSGIN_04_VALID BIT(13) |
| # define AUTOSCSI_BUSY BIT(15) |
| |
| #define SCSI_CSB_IN 0x42 /* BASE+42, B, R */ |
| |
| #define SCSI_MSG_OUT 0x44 /* BASE+44, DW, R/W */ |
| # define MSGOUT_COUNT_MASK (BIT(0)|BIT(1)) |
| # define MV_VALID BIT(7) |
| |
| #define SEL_TIME_OUT 0x48 /* BASE+48, W, R/W */ |
| #define SAVED_SACK_CNT 0x4c /* BASE+4c, DW, R */ |
| |
| #define HTOSDATADELAY 0x50 /* BASE+50, B, R/W */ |
| #define STOHDATADELAY 0x54 /* BASE+54, B, R/W */ |
| #define ACKSUMCHECKRD 0x58 /* BASE+58, W, R */ |
| #define REQSUMCHECKRD 0x5c /* BASE+5c, W, R */ |
| |
| |
| /********************/ |
| /* indexed register */ |
| /********************/ |
| |
| #define CLOCK_DIV 0x00 /* BASE+08, IDX+00, B, R/W */ |
| # define CLOCK_2 BIT(0) /* MCLK/2 */ |
| # define CLOCK_4 BIT(1) /* MCLK/4 */ |
| # define PCICLK BIT(7) /* PCICLK (33MHz) */ |
| |
| #define TERM_PWR_CONTROL 0x01 /* BASE+08, IDX+01, B, R/W */ |
| # define BPWR BIT(0) |
| # define SENSE BIT(1) /* Read Only */ |
| |
| #define EXT_PORT_DDR 0x02 /* BASE+08, IDX+02, B, R/W */ |
| #define EXT_PORT 0x03 /* BASE+08, IDX+03, B, R/W */ |
| # define LED_ON (0) |
| # define LED_OFF BIT(0) |
| |
| #define IRQ_SELECT 0x04 /* BASE+08, IDX+04, W, R/W */ |
| # define IRQSELECT_RESELECT_IRQ BIT(0) |
| # define IRQSELECT_PHASE_CHANGE_IRQ BIT(1) |
| # define IRQSELECT_SCSIRESET_IRQ BIT(2) |
| # define IRQSELECT_TIMER_IRQ BIT(3) |
| # define IRQSELECT_FIFO_SHLD_IRQ BIT(4) |
| # define IRQSELECT_TARGET_ABORT_IRQ BIT(5) |
| # define IRQSELECT_MASTER_ABORT_IRQ BIT(6) |
| # define IRQSELECT_SERR_IRQ BIT(7) |
| # define IRQSELECT_PERR_IRQ BIT(8) |
| # define IRQSELECT_BMCNTERR_IRQ BIT(9) |
| # define IRQSELECT_AUTO_SCSI_SEQ_IRQ BIT(10) |
| |
| #define OLD_SCSI_PHASE 0x05 /* BASE+08, IDX+05, B, R */ |
| # define OLD_MSG BIT(0) |
| # define OLD_IO BIT(1) |
| # define OLD_CD BIT(2) |
| # define OLD_BUSY BIT(3) |
| |
| #define FIFO_FULL_SHLD_COUNT 0x06 /* BASE+08, IDX+06, B, R/W */ |
| #define FIFO_EMPTY_SHLD_COUNT 0x07 /* BASE+08, IDX+07, B, R/W */ |
| |
| #define EXP_ROM_CONTROL 0x08 /* BASE+08, IDX+08, B, R/W */ /* external ROM control */ |
| # define ROM_WRITE_ENB BIT(0) |
| # define IO_ACCESS_ENB BIT(1) |
| # define ROM_ADR_CLEAR BIT(2) |
| |
| #define EXP_ROM_ADR 0x09 /* BASE+08, IDX+09, W, R/W */ |
| |
| #define EXP_ROM_DATA 0x0a /* BASE+08, IDX+0a, B, R/W */ |
| |
| #define CHIP_MODE 0x0b /* BASE+08, IDX+0b, B, R */ /* NinjaSCSI-32Bi only */ |
| # define OEM0 BIT(1) /* OEM select */ /* 00=I-O DATA, 01=KME, 10=Workbit, 11=Ext ROM */ |
| # define OEM1 BIT(2) /* OEM select */ |
| # define OPTB BIT(3) /* KME mode select */ |
| # define OPTC BIT(4) /* KME mode select */ |
| # define OPTD BIT(5) /* KME mode select */ |
| # define OPTE BIT(6) /* KME mode select */ |
| # define OPTF BIT(7) /* Power management */ |
| |
| #define MISC_WR 0x0c /* BASE+08, IDX+0c, W, R/W */ |
| #define MISC_RD 0x0c |
| # define SCSI_DIRECTION_DETECTOR_SELECT BIT(0) |
| # define SCSI2_HOST_DIRECTION_VALID BIT(1) /* Read only */ |
| # define HOST2_SCSI_DIRECTION_VALID BIT(2) /* Read only */ |
| # define DELAYED_BMSTART BIT(3) |
| # define MASTER_TERMINATION_SELECT BIT(4) |
| # define BMREQ_NEGATE_TIMING_SEL BIT(5) |
| # define AUTOSEL_TIMING_SEL BIT(6) |
| # define MISC_MABORT_MASK BIT(7) |
| # define BMSTOP_CHANGE2_NONDATA_PHASE BIT(8) |
| |
| #define BM_CYCLE 0x0d /* BASE+08, IDX+0d, B, R/W */ |
| # define BM_CYCLE0 BIT(0) |
| # define BM_CYCLE1 BIT(1) |
| # define BM_FRAME_ASSERT_TIMING BIT(2) |
| # define BM_IRDY_ASSERT_TIMING BIT(3) |
| # define BM_SINGLE_BUS_MASTER BIT(4) |
| # define MEMRD_CMD0 BIT(5) |
| # define SGT_AUTO_PARA_MEMED_CMD BIT(6) |
| # define MEMRD_CMD1 BIT(7) |
| |
| |
| #define SREQ_EDGH 0x0e /* BASE+08, IDX+0e, B, W */ |
| # define SREQ_EDGH_SELECT BIT(0) |
| |
| #define UP_CNT 0x0f /* BASE+08, IDX+0f, B, W */ |
| # define REQCNT_UP BIT(0) |
| # define ACKCNT_UP BIT(1) |
| # define BMADR_UP BIT(4) |
| # define BMCNT_UP BIT(5) |
| # define SGT_CNT_UP BIT(7) |
| |
| #define CFG_CMD_STR 0x10 /* BASE+08, IDX+10, W, R */ |
| #define CFG_LATE_CACHE 0x11 /* BASE+08, IDX+11, W, R/W */ |
| #define CFG_BASE_ADR_1 0x12 /* BASE+08, IDX+12, W, R */ |
| #define CFG_BASE_ADR_2 0x13 /* BASE+08, IDX+13, W, R */ |
| #define CFG_INLINE 0x14 /* BASE+08, IDX+14, W, R */ |
| |
| #define SERIAL_ROM_CTL 0x15 /* BASE+08, IDX+15, B, R */ |
| # define SCL BIT(0) |
| # define ENA BIT(1) |
| # define SDA BIT(2) |
| |
| #define FIFO_HST_POINTER 0x16 /* BASE+08, IDX+16, B, R/W */ |
| #define SREQ_DELAY 0x17 /* BASE+08, IDX+17, B, R/W */ |
| #define SACK_DELAY 0x18 /* BASE+08, IDX+18, B, R/W */ |
| #define SREQ_NOISE_CANCEL 0x19 /* BASE+08, IDX+19, B, R/W */ |
| #define SDP_NOISE_CANCEL 0x1a /* BASE+08, IDX+1a, B, R/W */ |
| #define DELAY_TEST 0x1b /* BASE+08, IDX+1b, B, R/W */ |
| #define SD0_NOISE_CANCEL 0x20 /* BASE+08, IDX+20, B, R/W */ |
| #define SD1_NOISE_CANCEL 0x21 /* BASE+08, IDX+21, B, R/W */ |
| #define SD2_NOISE_CANCEL 0x22 /* BASE+08, IDX+22, B, R/W */ |
| #define SD3_NOISE_CANCEL 0x23 /* BASE+08, IDX+23, B, R/W */ |
| #define SD4_NOISE_CANCEL 0x24 /* BASE+08, IDX+24, B, R/W */ |
| #define SD5_NOISE_CANCEL 0x25 /* BASE+08, IDX+25, B, R/W */ |
| #define SD6_NOISE_CANCEL 0x26 /* BASE+08, IDX+26, B, R/W */ |
| #define SD7_NOISE_CANCEL 0x27 /* BASE+08, IDX+27, B, R/W */ |
| |
| |
| /* |
| * Useful Bus Monitor status combinations. |
| */ |
| #define BUSMON_BUS_FREE 0 |
| #define BUSMON_COMMAND ( BUSMON_BSY | BUSMON_CD | BUSMON_REQ ) |
| #define BUSMON_MESSAGE_IN ( BUSMON_BSY | BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) |
| #define BUSMON_MESSAGE_OUT ( BUSMON_BSY | BUSMON_MSG | BUSMON_CD | BUSMON_REQ ) |
| #define BUSMON_DATA_IN ( BUSMON_BSY | BUSMON_IO | BUSMON_REQ ) |
| #define BUSMON_DATA_OUT ( BUSMON_BSY | BUSMON_REQ ) |
| #define BUSMON_STATUS ( BUSMON_BSY | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) |
| #define BUSMON_RESELECT ( BUSMON_IO | BUSMON_SEL) |
| #define BUSMON_PHASE_MASK ( BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_SEL) |
| |
| #define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) |
| #define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) |
| #define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) |
| #define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) |
| #define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) |
| #define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) |
| #define BUSPHASE_SELECT ( BUSMON_SEL | BUSMON_IO ) |
| |
| |
| /************************************************************************ |
| * structure for DMA/Scatter Gather list |
| */ |
| #define NSP32_SG_SIZE SG_ALL |
| |
| typedef struct _nsp32_sgtable { |
| /* values must be little endian */ |
| u32_le addr; /* transfer address */ |
| u32_le len; /* transfer length. BIT(31) is for SGT_END mark */ |
| } __attribute__ ((packed)) nsp32_sgtable; |
| |
| typedef struct _nsp32_sglun { |
| nsp32_sgtable sgt[NSP32_SG_SIZE+1]; /* SG table */ |
| } __attribute__ ((packed)) nsp32_sglun; |
| #define NSP32_SG_TABLE_SIZE (sizeof(nsp32_sgtable) * NSP32_SG_SIZE * MAX_TARGET * MAX_LUN) |
| |
| /* Auto parameter mode memory map. */ |
| /* All values must be little endian. */ |
| typedef struct _nsp32_autoparam { |
| u8 cdb[4 * 0x10]; /* SCSI Command */ |
| u32_le msgout; /* outgoing messages */ |
| u8 syncreg; /* sync register value */ |
| u8 ackwidth; /* ack width register value */ |
| u8 target_id; /* target/host device id */ |
| u8 sample_reg; /* hazard killer sampling rate */ |
| u16_le command_control; /* command control register */ |
| u16_le transfer_control; /* transfer control register */ |
| u32_le sgt_pointer; /* SG table physical address for DMA */ |
| u32_le dummy[2]; |
| } __attribute__ ((packed)) nsp32_autoparam; /* must be packed struct */ |
| |
| /* |
| * host data structure |
| */ |
| /* message in/out buffer */ |
| #define MSGOUTBUF_MAX 20 |
| #define MSGINBUF_MAX 20 |
| |
| /* flag for trans_method */ |
| #define NSP32_TRANSFER_BUSMASTER BIT(0) |
| #define NSP32_TRANSFER_MMIO BIT(1) /* Not supported yet */ |
| #define NSP32_TRANSFER_PIO BIT(2) /* Not supported yet */ |
| |
| |
| /* |
| * structure for connected LUN dynamic data |
| * |
| * Note: Currently tagged queuing is disabled, each nsp32_lunt holds |
| * one SCSI command and one state. |
| */ |
| #define DISCPRIV_OK BIT(0) /* DISCPRIV Enable mode */ |
| #define MSGIN03 BIT(1) /* Auto Msg In 03 Flag */ |
| |
| typedef struct _nsp32_lunt { |
| struct scsi_cmnd *SCpnt; /* Current Handling struct scsi_cmnd */ |
| unsigned long save_datp; /* Save Data Pointer - saved position from initial address */ |
| int msgin03; /* auto msg in 03 flag */ |
| unsigned int sg_num; /* Total number of SG entries */ |
| int cur_entry; /* Current SG entry number */ |
| nsp32_sglun *sglun; /* sg table per lun */ |
| dma_addr_t sglun_paddr; /* sglun physical address */ |
| } nsp32_lunt; |
| |
| |
| /* |
| * SCSI TARGET/LUN definition |
| */ |
| #define NSP32_HOST_SCSIID 7 /* SCSI initiator is everytime defined as 7 */ |
| #define MAX_TARGET 8 |
| #define MAX_LUN 8 /* XXX: In SPI3, max number of LUN is 64. */ |
| |
| |
| typedef struct _nsp32_sync_table { |
| unsigned char period_num; /* period number */ |
| unsigned char ackwidth; /* ack width designated by period */ |
| unsigned char start_period; /* search range - start period */ |
| unsigned char end_period; /* search range - end period */ |
| unsigned char sample_rate; /* hazard killer parameter */ |
| } nsp32_sync_table; |
| |
| |
| /* |
| * structure for target device static data |
| */ |
| /* flag for nsp32_target.sync_flag */ |
| #define SDTR_INITIATOR BIT(0) /* sending SDTR from initiator */ |
| #define SDTR_TARGET BIT(1) /* sending SDTR from target */ |
| #define SDTR_DONE BIT(2) /* exchanging SDTR has been processed */ |
| |
| /* syncronous period value for nsp32_target.config_max */ |
| #define FAST5M 0x32 |
| #define FAST10M 0x19 |
| #define ULTRA20M 0x0c |
| |
| /* flag for nsp32_target.{sync_offset}, period */ |
| #define ASYNC_OFFSET 0 /* asynchronous transfer */ |
| #define SYNC_OFFSET 0xf /* synchronous transfer max offset */ |
| |
| /* syncreg: |
| bit:07 06 05 04 03 02 01 00 |
| ---PERIOD-- ---OFFSET-- */ |
| #define TO_SYNCREG(period, offset) (((period) & 0x0f) << 4 | ((offset) & 0x0f)) |
| |
| typedef struct _nsp32_target { |
| unsigned char syncreg; /* value for SYNCREG */ |
| unsigned char ackwidth; /* value for ACKWIDTH */ |
| unsigned char period; /* sync period (0-255) */ |
| unsigned char offset; /* sync offset (0-15) */ |
| int sync_flag; /* SDTR_*, 0 */ |
| int limit_entry; /* max speed limit entry designated |
| by EEPROM configuration */ |
| unsigned char sample_reg; /* SREQ hazard killer register */ |
| } nsp32_target; |
| |
| typedef struct _nsp32_hw_data { |
| int IrqNumber; |
| int BaseAddress; |
| int NumAddress; |
| void __iomem *MmioAddress; |
| #define NSP32_MMIO_OFFSET 0x0800 |
| unsigned long MmioLength; |
| |
| struct scsi_cmnd *CurrentSC; |
| |
| struct pci_dev *Pci; |
| const struct pci_device_id *pci_devid; |
| struct Scsi_Host *Host; |
| spinlock_t Lock; |
| |
| char info_str[100]; |
| |
| /* allocated memory region */ |
| nsp32_sglun *sg_list; /* sglist virtuxal address */ |
| dma_addr_t sg_paddr; /* physical address of hw_sg_table */ |
| nsp32_autoparam *autoparam; /* auto parameter transfer region */ |
| dma_addr_t auto_paddr; /* physical address of autoparam */ |
| int cur_entry; /* current sgt entry */ |
| |
| /* target/LUN */ |
| nsp32_lunt *cur_lunt; /* Current connected LUN table */ |
| nsp32_lunt lunt[MAX_TARGET][MAX_LUN]; /* All LUN table */ |
| |
| nsp32_target *cur_target; /* Current connected SCSI ID */ |
| nsp32_target target[MAX_TARGET]; /* SCSI ID */ |
| int cur_id; /* Current connected target ID */ |
| int cur_lun; /* Current connected target LUN */ |
| |
| /* behavior setting parameters */ |
| int trans_method; /* transfer method flag */ |
| int resettime; /* Reset time */ |
| int clock; /* clock dividing flag */ |
| nsp32_sync_table *synct; /* sync_table determined by clock */ |
| int syncnum; /* the max number of synct element */ |
| |
| /* message buffer */ |
| unsigned char msgoutbuf[MSGOUTBUF_MAX]; /* msgout buffer */ |
| char msgout_len; /* msgoutbuf length */ |
| unsigned char msginbuf [MSGINBUF_MAX]; /* megin buffer */ |
| char msgin_len; /* msginbuf length */ |
| |
| } nsp32_hw_data; |
| |
| /* |
| * TIME definition |
| */ |
| #define RESET_HOLD_TIME 10000 /* reset time in us (SCSI-2 says the |
| minimum is 25us) */ |
| #define SEL_TIMEOUT_TIME 10000 /* 250ms defined in SCSI specification |
| (25.6us/1unit) */ |
| #define ARBIT_TIMEOUT_TIME 100 /* 100us */ |
| #define REQSACK_TIMEOUT_TIME 10000 /* max wait time for REQ/SACK assertion |
| or negation, 10000us == 10ms */ |
| |
| #endif /* _NSP32_H */ |
| /* end */ |
