| /* |
| * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver. |
| * Copyright (C) 2005 Martin Vaughan |
| * |
| * Audio source switching for Adaptec AVC-2410 added by Trev Jackson |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/ioctl.h> |
| #include <asm/uaccess.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-id.h> |
| #include <linux/videodev.h> |
| #include <media/v4l2-common.h> |
| |
| MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC"); |
| MODULE_AUTHOR("Martin Vaughan"); |
| MODULE_LICENSE("GPL"); |
| |
| static int debug = 0; |
| |
| module_param(debug, bool, 0644); |
| |
| MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); |
| |
| static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; |
| |
| |
| I2C_CLIENT_INSMOD; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int cs53l32a_write(struct i2c_client *client, u8 reg, u8 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static int cs53l32a_read(struct i2c_client *client, u8 reg) |
| { |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static int cs53l32a_command(struct i2c_client *client, unsigned int cmd, |
| void *arg) |
| { |
| struct v4l2_audio *input = arg; |
| struct v4l2_control *ctrl = arg; |
| |
| switch (cmd) { |
| case VIDIOC_S_AUDIO: |
| /* There are 2 physical inputs, but the second input can be |
| placed in two modes, the first mode bypasses the PGA (gain), |
| the second goes through the PGA. Hence there are three |
| possible inputs to choose from. */ |
| if (input->index > 2) { |
| v4l_err(client, "Invalid input %d.\n", input->index); |
| return -EINVAL; |
| } |
| cs53l32a_write(client, 0x01, 0x01 + (input->index << 4)); |
| break; |
| |
| case VIDIOC_G_AUDIO: |
| memset(input, 0, sizeof(*input)); |
| input->index = (cs53l32a_read(client, 0x01) >> 4) & 3; |
| break; |
| |
| case VIDIOC_G_CTRL: |
| if (ctrl->id == V4L2_CID_AUDIO_MUTE) { |
| ctrl->value = (cs53l32a_read(client, 0x03) & 0xc0) != 0; |
| break; |
| } |
| if (ctrl->id != V4L2_CID_AUDIO_VOLUME) |
| return -EINVAL; |
| ctrl->value = (s8)cs53l32a_read(client, 0x04); |
| break; |
| |
| case VIDIOC_S_CTRL: |
| if (ctrl->id == V4L2_CID_AUDIO_MUTE) { |
| cs53l32a_write(client, 0x03, ctrl->value ? 0xf0 : 0x30); |
| break; |
| } |
| if (ctrl->id != V4L2_CID_AUDIO_VOLUME) |
| return -EINVAL; |
| if (ctrl->value > 12 || ctrl->value < -96) |
| return -EINVAL; |
| cs53l32a_write(client, 0x04, (u8) ctrl->value); |
| cs53l32a_write(client, 0x05, (u8) ctrl->value); |
| break; |
| |
| case VIDIOC_LOG_STATUS: |
| { |
| u8 v = cs53l32a_read(client, 0x01); |
| u8 m = cs53l32a_read(client, 0x03); |
| s8 vol = cs53l32a_read(client, 0x04); |
| |
| v4l_info(client, "Input: %d%s\n", (v >> 4) & 3, |
| (m & 0xC0) ? " (muted)" : ""); |
| v4l_info(client, "Volume: %d dB\n", vol); |
| break; |
| } |
| |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| /* i2c implementation */ |
| |
| /* |
| * Generic i2c probe |
| * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' |
| */ |
| |
| static struct i2c_driver i2c_driver; |
| |
| static int cs53l32a_attach(struct i2c_adapter *adapter, int address, int kind) |
| { |
| struct i2c_client *client; |
| int i; |
| |
| /* Check if the adapter supports the needed features */ |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return 0; |
| |
| client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); |
| if (client == 0) |
| return -ENOMEM; |
| |
| memset(client, 0, sizeof(struct i2c_client)); |
| client->addr = address; |
| client->adapter = adapter; |
| client->driver = &i2c_driver; |
| snprintf(client->name, sizeof(client->name) - 1, "cs53l32a"); |
| |
| v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name); |
| |
| for (i = 1; i <= 7; i++) { |
| u8 v = cs53l32a_read(client, i); |
| |
| v4l_dbg(1, client, "Read Reg %d %02x\n", i, v); |
| } |
| |
| /* Set cs53l32a internal register for Adaptec 2010/2410 setup */ |
| |
| cs53l32a_write(client, 0x01, (u8) 0x21); |
| cs53l32a_write(client, 0x02, (u8) 0x29); |
| cs53l32a_write(client, 0x03, (u8) 0x30); |
| cs53l32a_write(client, 0x04, (u8) 0x00); |
| cs53l32a_write(client, 0x05, (u8) 0x00); |
| cs53l32a_write(client, 0x06, (u8) 0x00); |
| cs53l32a_write(client, 0x07, (u8) 0x00); |
| |
| /* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */ |
| |
| for (i = 1; i <= 7; i++) { |
| u8 v = cs53l32a_read(client, i); |
| |
| v4l_dbg(1, client, "Read Reg %d %02x\n", i, v); |
| } |
| |
| i2c_attach_client(client); |
| |
| return 0; |
| } |
| |
| static int cs53l32a_probe(struct i2c_adapter *adapter) |
| { |
| if (adapter->class & I2C_CLASS_TV_ANALOG) |
| return i2c_probe(adapter, &addr_data, cs53l32a_attach); |
| return 0; |
| } |
| |
| static int cs53l32a_detach(struct i2c_client *client) |
| { |
| int err; |
| |
| err = i2c_detach_client(client); |
| if (err) { |
| return err; |
| } |
| kfree(client); |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| /* i2c implementation */ |
| static struct i2c_driver i2c_driver = { |
| .driver = { |
| .name = "cs53l32a", |
| }, |
| .id = I2C_DRIVERID_CS53L32A, |
| .attach_adapter = cs53l32a_probe, |
| .detach_client = cs53l32a_detach, |
| .command = cs53l32a_command, |
| }; |
| |
| |
| static int __init cs53l32a_init_module(void) |
| { |
| return i2c_add_driver(&i2c_driver); |
| } |
| |
| static void __exit cs53l32a_cleanup_module(void) |
| { |
| i2c_del_driver(&i2c_driver); |
| } |
| |
| module_init(cs53l32a_init_module); |
| module_exit(cs53l32a_cleanup_module); |