| /* |
| * mach-davinci/devices.c |
| * |
| * DaVinci platform device setup/initialization |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/reboot.h> |
| |
| #include <mach/hardware.h> |
| #include <linux/platform_data/i2c-davinci.h> |
| #include <mach/irqs.h> |
| #include <mach/cputype.h> |
| #include <mach/mux.h> |
| #include <linux/platform_data/mmc-davinci.h> |
| #include <mach/time.h> |
| #include <linux/platform_data/edma.h> |
| |
| |
| #include "davinci.h" |
| #include "clock.h" |
| |
| #define DAVINCI_I2C_BASE 0x01C21000 |
| #define DAVINCI_ATA_BASE 0x01C66000 |
| #define DAVINCI_MMCSD0_BASE 0x01E10000 |
| #define DM355_MMCSD0_BASE 0x01E11000 |
| #define DM355_MMCSD1_BASE 0x01E00000 |
| #define DM365_MMCSD0_BASE 0x01D11000 |
| #define DM365_MMCSD1_BASE 0x01D00000 |
| |
| #define DAVINCI_DMA_MMCRXEVT 26 |
| #define DAVINCI_DMA_MMCTXEVT 27 |
| |
| void __iomem *davinci_sysmod_base; |
| |
| void davinci_map_sysmod(void) |
| { |
| davinci_sysmod_base = ioremap_nocache(DAVINCI_SYSTEM_MODULE_BASE, |
| 0x800); |
| /* |
| * Throw a bug since a lot of board initialization code depends |
| * on system module availability. ioremap() failing this early |
| * need careful looking into anyway. |
| */ |
| BUG_ON(!davinci_sysmod_base); |
| } |
| |
| static struct resource i2c_resources[] = { |
| { |
| .start = DAVINCI_I2C_BASE, |
| .end = DAVINCI_I2C_BASE + 0x40, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IRQ_I2C, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device davinci_i2c_device = { |
| .name = "i2c_davinci", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(i2c_resources), |
| .resource = i2c_resources, |
| }; |
| |
| void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) |
| { |
| if (cpu_is_davinci_dm644x()) |
| davinci_cfg_reg(DM644X_I2C); |
| |
| davinci_i2c_device.dev.platform_data = pdata; |
| (void) platform_device_register(&davinci_i2c_device); |
| } |
| |
| static struct resource ide_resources[] = { |
| { |
| .start = DAVINCI_ATA_BASE, |
| .end = DAVINCI_ATA_BASE + 0x7ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IRQ_IDE, |
| .end = IRQ_IDE, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 ide_dma_mask = DMA_BIT_MASK(32); |
| |
| static struct platform_device ide_device = { |
| .name = "palm_bk3710", |
| .id = -1, |
| .resource = ide_resources, |
| .num_resources = ARRAY_SIZE(ide_resources), |
| .dev = { |
| .dma_mask = &ide_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| void __init davinci_init_ide(void) |
| { |
| if (cpu_is_davinci_dm644x()) { |
| davinci_cfg_reg(DM644X_HPIEN_DISABLE); |
| davinci_cfg_reg(DM644X_ATAEN); |
| davinci_cfg_reg(DM644X_HDIREN); |
| } else if (cpu_is_davinci_dm646x()) { |
| /* IRQ_DM646X_IDE is the same as IRQ_IDE */ |
| davinci_cfg_reg(DM646X_ATAEN); |
| } else { |
| WARN_ON(1); |
| return; |
| } |
| |
| platform_device_register(&ide_device); |
| } |
| |
| #if IS_ENABLED(CONFIG_MMC_DAVINCI) |
| |
| static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); |
| |
| static struct resource mmcsd0_resources[] = { |
| { |
| /* different on dm355 */ |
| .start = DAVINCI_MMCSD0_BASE, |
| .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| /* IRQs: MMC/SD, then SDIO */ |
| { |
| .start = IRQ_MMCINT, |
| .flags = IORESOURCE_IRQ, |
| }, { |
| /* different on dm355 */ |
| .start = IRQ_SDIOINT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| /* DMA channels: RX, then TX */ |
| { |
| .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), |
| .flags = IORESOURCE_DMA, |
| }, { |
| .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT), |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct platform_device davinci_mmcsd0_device = { |
| .name = "dm6441-mmc", |
| .id = 0, |
| .dev = { |
| .dma_mask = &mmcsd0_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .num_resources = ARRAY_SIZE(mmcsd0_resources), |
| .resource = mmcsd0_resources, |
| }; |
| |
| static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32); |
| |
| static struct resource mmcsd1_resources[] = { |
| { |
| .start = DM355_MMCSD1_BASE, |
| .end = DM355_MMCSD1_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| /* IRQs: MMC/SD, then SDIO */ |
| { |
| .start = IRQ_DM355_MMCINT1, |
| .flags = IORESOURCE_IRQ, |
| }, { |
| .start = IRQ_DM355_SDIOINT1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| /* DMA channels: RX, then TX */ |
| { |
| .start = EDMA_CTLR_CHAN(0, 30), /* rx */ |
| .flags = IORESOURCE_DMA, |
| }, { |
| .start = EDMA_CTLR_CHAN(0, 31), /* tx */ |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct platform_device davinci_mmcsd1_device = { |
| .name = "dm6441-mmc", |
| .id = 1, |
| .dev = { |
| .dma_mask = &mmcsd1_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .num_resources = ARRAY_SIZE(mmcsd1_resources), |
| .resource = mmcsd1_resources, |
| }; |
| |
| |
| void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) |
| { |
| struct platform_device *pdev = NULL; |
| |
| if (WARN_ON(cpu_is_davinci_dm646x())) |
| return; |
| |
| /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too; |
| * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused. |
| * |
| * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are |
| * not handled right here ... |
| */ |
| switch (module) { |
| case 1: |
| if (cpu_is_davinci_dm355()) { |
| /* REVISIT we may not need all these pins if e.g. this |
| * is a hard-wired SDIO device... |
| */ |
| davinci_cfg_reg(DM355_SD1_CMD); |
| davinci_cfg_reg(DM355_SD1_CLK); |
| davinci_cfg_reg(DM355_SD1_DATA0); |
| davinci_cfg_reg(DM355_SD1_DATA1); |
| davinci_cfg_reg(DM355_SD1_DATA2); |
| davinci_cfg_reg(DM355_SD1_DATA3); |
| } else if (cpu_is_davinci_dm365()) { |
| /* Configure pull down control */ |
| unsigned v; |
| |
| v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); |
| __raw_writel(v & ~0xfc0, |
| DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); |
| |
| mmcsd1_resources[0].start = DM365_MMCSD1_BASE; |
| mmcsd1_resources[0].end = DM365_MMCSD1_BASE + |
| SZ_4K - 1; |
| mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1; |
| davinci_mmcsd1_device.name = "da830-mmc"; |
| } else |
| break; |
| |
| pdev = &davinci_mmcsd1_device; |
| break; |
| case 0: |
| if (cpu_is_davinci_dm355()) { |
| mmcsd0_resources[0].start = DM355_MMCSD0_BASE; |
| mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; |
| mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0; |
| |
| /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ |
| davinci_cfg_reg(DM355_MMCSD0); |
| |
| /* enable RX EDMA */ |
| davinci_cfg_reg(DM355_EVT26_MMC0_RX); |
| } else if (cpu_is_davinci_dm365()) { |
| mmcsd0_resources[0].start = DM365_MMCSD0_BASE; |
| mmcsd0_resources[0].end = DM365_MMCSD0_BASE + |
| SZ_4K - 1; |
| mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0; |
| davinci_mmcsd0_device.name = "da830-mmc"; |
| } else if (cpu_is_davinci_dm644x()) { |
| /* REVISIT: should this be in board-init code? */ |
| /* Power-on 3.3V IO cells */ |
| __raw_writel(0, |
| DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); |
| /*Set up the pull regiter for MMC */ |
| davinci_cfg_reg(DM644X_MSTK); |
| } |
| |
| pdev = &davinci_mmcsd0_device; |
| break; |
| } |
| |
| if (WARN_ON(!pdev)) |
| return; |
| |
| pdev->dev.platform_data = config; |
| platform_device_register(pdev); |
| } |
| |
| #else |
| |
| void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) |
| { |
| } |
| |
| #endif |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct resource wdt_resources[] = { |
| { |
| .start = DAVINCI_WDOG_BASE, |
| .end = DAVINCI_WDOG_BASE + SZ_1K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| struct platform_device davinci_wdt_device = { |
| .name = "watchdog", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(wdt_resources), |
| .resource = wdt_resources, |
| }; |
| |
| void davinci_restart(enum reboot_mode mode, const char *cmd) |
| { |
| davinci_watchdog_reset(&davinci_wdt_device); |
| } |
| |
| static void davinci_init_wdt(void) |
| { |
| platform_device_register(&davinci_wdt_device); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| struct davinci_timer_instance davinci_timer_instance[2] = { |
| { |
| .base = DAVINCI_TIMER0_BASE, |
| .bottom_irq = IRQ_TINT0_TINT12, |
| .top_irq = IRQ_TINT0_TINT34, |
| }, |
| { |
| .base = DAVINCI_TIMER1_BASE, |
| .bottom_irq = IRQ_TINT1_TINT12, |
| .top_irq = IRQ_TINT1_TINT34, |
| }, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int __init davinci_init_devices(void) |
| { |
| /* please keep these calls, and their implementations above, |
| * in alphabetical order so they're easier to sort through. |
| */ |
| davinci_init_wdt(); |
| |
| return 0; |
| } |
| arch_initcall(davinci_init_devices); |
| |